Rev.2.00, Dec.17.2003, page 1 of 9
HD74ALVC2G04
Triple Inverter Buffers REJ03D0161–0200Z
(Previous ADE-205-6 31A (Z))
Rev.2.00
Dec.17.2003
Description
The HD74ALVC2G04 has triple inverters in an 8 pin package. Low voltage and high-speed operation is
suitable for the battery powered products (e.g., notebook computers), and the low power consumption
extends the battery life.
Features
The basic gate function is lined up as Renesas uni logic series.
Supplied on emboss taping for high-speed automatic mounting.
Supply voltage range : 1.2 to 3.6 V
Operating temperature range: 40 to +85°C
All inputs VIH (Max.) = 3.6 V (@VCC = 0 V to 3.6 V)
All outputs VO (Max.) = 3.6 V (@VCC = 0 V)
Output current ±2 mA (@VCC = 1.2 V)
±4 mA (@VCC = 1.4 V to 1.6 V)
±6 mA (@VCC = 1.65 V to 1.95 V)
±18 mA (@VCC = 2.3 V to 2.7 V)
±24 mA (@VCC = 3.0 V to 3.6 V)
Ordering Information
Part Name Package Type Package Code Package
Abbreviation Taping Abbreviation
(Quantity)
HD74ALVC2G04USE SSOP-8 pin TTP-8DBV US E (3,000 pcs/reel)
HD74ALVC2G04
Rev.2.00, Dec.17.2003, page 2 of 9
Outline and Article Indication
HD74ALVC2G04
Lot No.
Y : Year code
(the last digit of year)
M : Month code
W : Week code
Y M W
A 0 4
Marking
Index band
SSOP-8
Function Table
Input A Output Y
HL
LH
H: High level
L: Low level
HD74ALVC2G04
Rev.2.00, Dec.17.2003, page 3 of 9
Pin Arrangement
(Top view)
8V
CC
1
71Y
63A
52Y
1A
2
3Y
3
2A
4
GND
Absolute Maximum Ratings
Item Symbol Ratings Unit Conditions
Supply voltage range VCC 0.5 to 4.6 V
Input voltage range *1 VI0.5 to 4.6 V
0.5 to VCC+0.5 Output : H or LOutput voltage range *1, 2 VO
0.5 to 4.6
V
VCC : OFF
Input clamp current IIK 50 mA VI < 0
Output clamp current IOK ±50 mA VO < 0 or VO > VCC
Continuous output current IO±50 mA VO = 0 to VCC
Continuous current through
VCC or GND ICC or IGND ±100 mA
Maximum power dissipation
at Ta = 25°C (in still air) *3 PT200 mW
Storage temperature Tstg 65 to 150 °C
Notes: The absolute maximum ratings are values, which must not individually be exceeded, an d
furthermore, no two of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
2. This value is limited to 4.6 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
HD74ALVC2G04
Rev.2.00, Dec.17.2003, page 4 of 9
Recommended Operating Conditions
Item Symbol Min Max Unit Conditions
Supply voltage range VCC 1.2 3.6 V
Input voltage range VI03.6V
Output voltage range VO0V
CC V
−2V
CC = 1.2 V
−4V
CC = 1.4 V
−6V
CC = 1.65 V
−18 VCC = 2.3 V
IOH
−24 VCC = 3.0 V
2V
CC = 1.2 V
4V
CC = 1.4 V
6V
CC = 1.65 V
18 VCC = 2.3 V
Output current
IOL
24
mA
VCC = 3.0 V
020 V
CC = 1.2 to 2.7 VInput transition rise or fall rate t / v
010
ns / V
VCC = 3.3±0.3 V
Operating free-air temperature Ta 40 85 °C
Note: Unused or floating inputs must be held high or low.
HD74ALVC2G04
Rev.2.00, Dec.17.2003, page 5 of 9
Electrical Characteristics
(Ta = 40 to 85°C)
Item Symbol VCC (V) * Min Typ Max Unit Test conditions
1.2 VCC×0.75 
1.4 to 1.6 VCC×0.7 
1.65 to 1.95 VCC×0.7 
2.3 to 2.7 1.7 
VIH
3.0 to 3.6 2.0 
1.2 VCC×0.25
1.4 to 1.6 VCC×0.3
1.65 to 1.95 VCC×0.3
2.3 to 2.7 0.7
Input voltage
VIL
3.0 to 3.6 0.8
V
Min to Max VCC0.2  IOH = 100 µA
1.2 0.9  IOH = 2 mA
1.4 1.1  IOH = 4 mA
1.65 1.2  IOH = 6 mA
2.3 1.7  IOH = 18 mA
VOH
3.0 2.2  IOH = 24 mA
Min to Max 0.2 IOL = 100 µA
1.2 0.3 IOL = 2 mA
1.4 0.3 IOL = 4 mA
1.65 0.3 IOL = 6 mA
2.3 0.55 IOL = 18 mA
Output voltage
VOL
3.0 0.55
V
IOL = 24 mA
Input current IIN 3.6 ±5µAV
IN = 3.6 V or GND
Quiescent supply
current ICC 3.6 10 µAV
IN = VCC or GND,
IO = 0
Output leakage
current IOFF 05µAV
IN or VO =
0 to 3.6 V
Input capacitance CIN 3.3 5.0 pF VIN = VCC or GND
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating
conditions.
HD74ALVC2G04
Rev.2.00, Dec.17.2003, page 6 of 9
Switching Characteristics
(Ta = 40 to 85°C)
VCC = 1.2 V
Item Symbol Min Typ Max Unit Test
conditions FROM
(Input) TO
(Output)
Propagation
delay time tPLH
tPHL
5.0 ns CL = 15 pF A Y
VCC = 1.5±0.1 V
Item Symbol Min Typ Max Unit Test
conditions FROM
(Input) TO
(Output)
Propagation
delay time tPLH
tPHL
2.0 7.0 ns CL = 15 pF A Y
VCC = 1.8±0.15 V
Item Symbol Min Typ Max Unit Test
conditions FROM
(Input) TO
(Output)
Propagation
delay time tPLH
tPHL
1.5 5.0 ns CL = 30 pF A Y
VCC = 2.5±0.2 V
Item Symbol Min Typ Max Unit Test
conditions FROM
(Input) TO
(Output)
Propagation
delay time tPLH
tPHL
1.0 3.5 ns CL = 30 pF A Y
VCC = 3.3±0.3 V
Item Symbol Min Typ Max Unit Test
conditions FROM
(Input) TO
(Output)
Propagation
delay time tPLH
tPHL
1.0 2.5 ns CL = 30 pF A Y
HD74ALVC2G04
Rev.2.00, Dec.17.2003, page 7 of 9
Operating Characteristics
(Ta = 25°C)
Item Symbol VCC (V) Min Typ Max Unit Test conditions
1.5 10.0
1.8 10.0
2.5 11.0
Power dissipation
capacitance CPD
3.3 12.0
pF f = 10 MHz
Test Circuit
L
Note: C includes probe and jig capacitance.
V = 1.8±0.15 V
CC
R1.0 k2.0 k500
L
C30 pF15 pF 30 pF
L
V = 2.5±0.2 V,
3.3±0.3 V
CC
V = 1.2 V,
1.5±0.1 V
CC
Symbol
Pulse
Generator
out
Z = 50
CLRL
Input
Output
VCC
HD74ALVC2G04
Rev.2.00, Dec.17.2003, page 8 of 9
Waveforms
Input
90%
10%10%
VIH
GND
VOH
VOL
tr
Vref Vref
tf
90%
tPHL tPLH
Output Vref Vref
Vref
VIH VCC VCC
t / t 2.0 ns 2.5 ns 2.5 ns
rf
2.7 V
50% 50% 1.5 V
V = 2.5±0.2 V
CC
V = 1.2 V,
1.5±0.1 V,
1.8±0.15 V
CC V = 3.3±0.3 V
CC
Symbol
Note: Input waveform : PRR = 10 MHz, duty cycle 50%
HD74ALVC2G04
Rev.2.00, Dec.17.2003, page 9 of 9
Package Dimensions
(0.5)
1.5 ± 0.2
Package Code
JEDEC
JEITA
Mass
(reference value)
TTP–8DBV
0.010 g
8 0.2
+ 0.1
0.05
0.13
+ 0.1
0.05
(0.5)
2.0 ± 0.2
(0.5)
0.7 ± 0.1 2.3 ± 0.1
3.1 ± 0.3
(0.4)
(0.4)
(0.17)
0 0.1
Unit: mm
©
2003. Renesas Technolo
gy
Corp., All ri
g
hts reserved. Printed in Japan
.
Colo
p
hon 1.0
Keep safet
y
first in
y
our circuit desi
g
ns
!
1. Renesas Technolo
gy
Corp. puts the maximum effort into makin
g
semiconductor products better and more reliable, but there is alwa
y
s the possibilit
y
that trouble
m
a
y
occur with them. Trouble with semiconductors ma
y
lead to personal in
j
ur
y
, fire or propert
y
dama
g
e
.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technolo
gy
Corp. is necessar
y
to reprint or reproduce in whole or in part these materials
.
7
. If these products or technolo
g
ies are sub
j
ect to the Japanese export control restrictions, the
y
must be exported under a license from the Japanese
g
overnment and
cannot
e imported into a countr
other than the approved destination.
An
y
diversion or reexport contrar
y
to the export control laws and re
g
ulatio
n
s of Japan and/or the countr
y
of destination is prohibited
.
8. Please contact Renesas Technolo
gy
Corp. for further details on these materials or the products contained therein
.
S
ales Strate
g
ic Plannin
g
Div. Nippon Bld
g
., 2-6-2, Ohte-machi, Chi
y
oda-ku, Tok
y
o 100-0004, Japa
n
htt
p
://www.renesas.co
m
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501
Renesas Technology Europe Limited.
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom
Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900
Renesas Technology Europe GmbH
Dornacher Str. 3, D-85622 Feldkirchen, Germany
Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11
Renesas Technology Hong Kong Ltd.
7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2375-6836
Renesas Technology Taiwan Co., Ltd.
FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
RENESAS SALES OFFICES