V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258
VS-150-24 Metal Enclosed Switching Power Supply
DC output voltage 24V
Output V. tolerance ±1%
Output rated current 6.5A
Output current range 0-6.5A
Ripple & noise 240mVp-p
Line regulation ±0.2%
Load regulation ±0.2%
DC output power 156W
Efficiency 85%
DC voltage adj. 21-28V (± 10% rated output voltage)
Input voltage range 88~132VAC / 176~264VAC selected by switch 47~63Hz; 248~370VDC
AC current 3.2A/115V 1.6A/230V
Inrush current cold start 35A
Leakage current <3.5mA/240VAC
Overload protection 105%~150% shutoff, AC recycle to restart
Over voltage protection 125%~145%
Over temp. protection ---
Temperature coefficient ±0.03% / °C (0~50°C)
Set up, rise, hold up time 100ms, 50ms, 20ms
Vibration 10~500Hz, 2G 10min./1cycle (1 hour each axes)
Withstand voltage I/P-O/P:3KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC, for 1 min.
Isolation resistance I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms min.
Working temp., humidity -10°C~+60% (refer to output derating curve), 20%-90% RH
Storage temp., humidity -20ºC~+85ºC, 10%~95% RH
Dimensions 7.83x4.33x1.97 inches (199x110x50 mm)
Weight 1.76 lbs (0.8 Kg)
Safety standards UL1950, TUV EN60950, UL 1012
EMC standards CISPR22 (EN55022), IEC1000-4-2,3,4,5 IEC1000-3-2
Notes: 1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient
2. Tolerance includes set up tolerance, line regulation, load regulation
3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor
4. Line regulation is measured from low line to high line at rated load
5, Load regulation is measure from 0% to 100% rated load
*V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise cus-
tomers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for cus-
tomer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s pub-
lished specifications. Nothing will be covered outside of standard product warranty.
Features
·AC input range selectable by switch
·Short circuit, overload, over-voltage
protected
·Cooling by free air convection
·100% full load burn-in test
·Fixed switching frequency at 25KHz
·2 year warranty