Document Number: 68008 For technical questions, contact: te1resistors@vishay.com www.vishay.com
Revision: 17-Mar-08 1
MRCN
Vishay Techno
Resistor/Capacitor Networks, Molded SIP
FEATURES
•Custom schematics available
•NP0 or X7R capacitors for line terminator
•Wide operating temperature range (- 55 °C to 125 °C)
•Molded epoxy case
•Solder coated copper terminals
•Solderability per MIL-STD-202 method 208E
•
Marking resistance to solvents per MIL-STD-202 method 215
Notes
(1) ± 1 % tolerance available on request
(2) NP0 Capacitors may be substituted for X7R capacitors
(3) Tighter tolerances available on request
Note
• Custom schematics available
STANDARD ELECTRICAL SPECIFICATIONS
MODEL SCHEMATIC
RESISTOR CHARACTERISTICS CAPACITOR CHARACTERISTICS
POWER
RATING
P70 °C W
RESISTANCE
(Ω)
RESISTANCE
TOLERANCE
± %
TEMP.
COEFF.
± ppm/°C TYPE (2) CAPACITANCE
RANGE
CAPACITANCE
TOLERANCE (3)
± %
CAPACITANCE
VOLTAGE
VDC
MRCN
10 0.20 50 - 1K 2 %, 5 %
(1 %) (1) 150 ppm NP0 33 pF - 3900 pF 10 %, 20 % 50
X7R 470 pF - 0.1 µF 10 %, 20 %
20 0.20 50 - 1K 2 %, 5 %
(1 %) (1) 150 ppm NP0 33 pF - 3900 pF 10 %, 20 % 50
X7R 470 pF - 0.1 µF 10 %, 20 %
30 0.20 50 - 1K 2 %, 5 %
(1 %) (1) 150 ppm NP0 33 pF - 3900 pF 10 %, 20 % 50
X7R 470 pF - 0.1 µF 10 %, 20 %
SCHEMATICS
8
CRR RR RR
123 4567
SCHEMATIC 10
10K ECL
terminator
network
RRR
CC C
1234 n-1 n
SCHEMATIC 20
RRRRRR
CC
12345678910
100K ECL
terminator
network
SCHEMATIC 30
DIMENSIONS in inches [millimeters]
NUMBER
OF PINS
A
± 0.010 [0.254]
B
± 0.010 [0.254]
C
± 0.010 [0.254]
8 0.780 [19.81] 0.345 [8.26] 0.040 [1.02]
10 1.040 [26.42] 0.346 [8.79] 0.075 [1.91]
A
B
C
#1 Pin
0.150 ± 0.010
[3.81
± 0.254]
0.010 ± 0.002
[0.254 ± 0.051]
0.020 ± 0.002
[0.508 ± 0.051]
0.100 ± 0.005
Non-Cumulative
0.125 ± 0.015
[3.18 ± 0.381]
0.020 ± 0.002
[0.508 ± 0.051] (Seating
Plane)
Pin #1 Identifier
[2.54 ± 0.127]
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MRCN081N101J560KTB (preferred part number format)
GLOBAL
MODEL PIN
COUNT SCHEMATIC CHARACTERISTIC RESISTANCE
VALUE RESISTANCE
TOLERANCE CAPACITANCE
VALUE CAPACITANCE
TOLERANCE TERMINAL
FINISH
PA C K AG I N G
MRCN 08
= 8 pin
10
= 10 pin
1
= 10
2
= 20
3
= 30
N
= NP0
X
= X7R 2 digit
significant
figure, followed
by a multiplier
101
= 100
Ω
220
= 22
Ω
102
= 1 k
Ω
F
= 1 %
G
= 2 %
J
= 5 %
(in picofarads)
2 digit significant
figure, followed
by a multiplier
101
= 100 pF
392
= 3000 pF
104
= 0.1 µF
K
= 10 %
M
= 20 %
T
=
Sn90/Pb10
B
= Bulk
T
= Tray
Historical Part Numbering: MRCN0801101J560KS10 (will continue to be accepted)
MRCN 08 01 101 J 560 K S10
HISTORICAL
MODEL PIN
COUNT SCHEMATIC RESISTANCE
VALUE RESISTANCE
TOLERANCE CAPACITANCE
VALUE CAPACITANCE
TOLERANCE TERMINAL
FINISH
N08 N11RC 01J BM 65 0 K T
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
