Not for new design. Use new F611-F612 Series. Loose MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS Taped Fig.1 R60 Fig. 2 Typical applications: blocking, coupling, decoupling, by-passing, interference suppression in low voltage applications (i.e.: AUTOMOTIVE). PRODUCT CODE: R60 Note: Special version, in compliance with DIN 44122 is available upon request. Construction: * STACKED technology for pitch 10mm (Rated Voltage from 50 to 630Vdc) p = 10 0.6 Od 0.05 p > 10 0.8 p = 37.5 1.0 * WOUND technology from pitch 10 to 27.5mm (Rated Voltage from 63 to 1000Vdc) All dimensions are in mm. Product code system The part number, comprising 14 digits, is formed as follows: 1 2 3 4 5 6 7 8 9 10 11 12 R 6 0 13 14 - Digit 1 to 3 Digit 4 Series code. d.c. rated voltage: C =50V D =63V E =100V G =160V I =250V M =400V P =630V Q =1000V Digit 5 Pitch: F=10mm; I=15mm; N=22.5mm; R=27.5mm; W=37.5mm Digits 7 - 8 - 9 indicate the first three digits of Digit 6 to 9 Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table1) Digit 12 Identifies the dimensions and electrical characteristics. Digit 13 Internal use Capacitance tolerance: Digit 14 J=5%; K=10%; M=20%. Pitch Box thickness (B) (mm) (mm) Maximum dimensions (mm) B max H max L max 10.0 15.0 15.0 22.5 27.5 37.5 B +0.2 B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 All <7.5 7.5 All All All H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 L +0.2 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 GENERAL TECHNICAL DAta Dielectric: polyester film (polyethylene terephthalate). Plates: aluminium layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. Marking: Manufacturer's logo (if requested), capacitance, tolerance, D.C. rated voltage. Climatic category: 55/105/56 IEC 60068-1 Operating temperature range: -55 to +105C Upper operating temperature of +125C is allow ed for a max.operating time of 1000h. Related documents: IEC 60384-2 Winding scheme Table 1 (for more detailed information, please refer to page 14) Standard packaging style Lead length (mm) AMMO-PACK Taping style P2 (mm) 12.70 Fig. (No.) 1 Ordering code Pitch (mm) 10.0/15.0 (Digit 10 to 11) AMMO-PACK 19.05 2 22.5 DQ REEL O 355mm 12.70 1 10.0/15.0 GY REEL O 500mm 12.70 1 10.0/15.0 CK REEL O 500mm 19.05 2 22.5/27.5 CK Loose, short leads 4 +2 single sided metallized polyester film DQ AA Loose, long leads (p<10mm) 17 +1/-2 Z3 Loose, long leads (p15mm) 30 +5 25 +2/-1 40 50 Note: Ammo-pack is the preferred packaging for taped version. 41 09/2008 Not for new design. Use new F611-F612 Series. R60 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS PRODUCT CODE: R60 STACKED VERSION Rated Cap. 50Vdc/30Vac Std dimensions B H (V/ s) (V2/ s) 4.0 9.0 13.0 10.0 30 3 E3 2.2 F 4.0 9.0 13.0 10.0 30 3 E3 3.3 F 5.0 11.0 13.0 10.0 30 3 E3 4.7 F 6.0 12.0 13.0 10.0 30 3 E3 5.6 F 6.0 12.0 13.0 10.0 30 3 E3 Rated Cap. 63Vdc/40Vac Std dimensions Max dv/dt Max K0 (V/ s) (V2/ s) H L p Max K0 1.5 F B L Max dv/dt p 1.0 F 4.0 9.0 13.0 10.0 50 6.3 E3 1.5 F 5.0 11.0 13.0 10.0 50 6.3 E3 2.2 F 5.0 11.0 13.0 10.0 50 6.3 E3 3.3 F 6.0 12.0 13.0 10.0 50 6.3 E3 Rated Cap. 100Vdc/63Vac Std dimensions B 0.33 F H 4.0 L p 9.0 13.0 10.0 Max dv/dt Max K0 (V/ s) (V2/ s) 75 15 E3 0.47 F 4.0 9.0 13.0 10.0 75 15 E3 0.68 F 4.0 9.0 13.0 10.0 75 15 E3 1.0 F 5.0 11.0 13.0 10.0 75 15 E3 1.5 F 5.0 11.0 13.0 10.0 75 15 E3 Rated Cap. 160Vdc/90Vac Std dimensions B H L p Max dv/dt Max K0 (V/ s) (V2/ s) 0.22 F 4.0 9.0 13.0 10.0 100 32 E3 0.33 F 4.0 9.0 13.0 10.0 100 32 E3 0.47 F 5.0 11.0 13.0 10.0 100 32 E3 0.68 F 6.0 12.0 13.0 10.0 100 32 E3 Part Number Rated Cap. 250Vdc/160Vac Std dimensions R60CF4150--6-- 0.10 F 4.0 9.0 13.0 10.0 150 75 E3 0.15 F 4.0 9.0 13.0 10.0 150 75 E3 0.22 F 5.0 11.0 13.0 10.0 150 75 E3 0.33 F 5.0 11.0 13.0 10.0 150 75 E3 R60CF4560--6-- 0.47 F 6.0 12.0 13.0 10.0 150 75 E3 Part Number Rated Cap. 400Vdc/200Vac Std dimensions B R60CF4220--6-R60CF4330--6-R60CF4470--6-- H B R60DF 4100--6-- H L L p p Max dv/dt Max K0 (V/ s) (V2/ s) Max dv/dt Max K0 (V/ s) (V2/ s) 0.033 F 4.0 9.0 13.0 10.0 175 140 E3 R60DF 4150--6-- 0.047 F 4.0 9.0 13.0 10.0 175 140 E3 0.068 F 4.0 9.0 13.0 10.0 175 140 E3 R60DF 4330--6-- 0.10 F 5.0 11.0 13.0 10.0 175 140 E3 0.15 F 6.0 12.0 13.0 10.0 175 140 E3 Rated Cap. 630Vdc/220Vac Std dimensions Max dv/dt Max K0 (V/ s) (V2/ s) R60DF 4220--6-Part Number B R60EF 3330--6-R60EF 3470--6-- H L p 0.010 F 4.0 9.0 13.0 10.0 200 250 E3 R60EF 3680--6-- 0.015 F 4.0 9.0 13.0 10.0 200 250 E3 0.022 F 4.0 9.0 13.0 10.0 200 250 E3 R60EF 4150--6-- 0.033 F 5.0 11.0 13.0 10.0 200 250 E3 0.047 F 5.0 11.0 13.0 10.0 200 250 E3 R60EF 4100--6-- Part Number R60GF 3220--6-- Part Number R60IF 3100--6-R60IF 3150--6-- R60IF 3220--6-- R60IF 3330--6-R60IF 3470--6-Part Number R60F 2330--6-- R60F 2470--6-- R60F 2680--6-- R60F 3100--6-- R60F 3150--6-Part Number R60PF 2100--6-- R60PF 2150--6-- R60PF 2220--6-- R60PF 2330--6-- R60PF 2470--6-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) R60GF 3330--6-R60GF 3470--6-R60GF 3680--6-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. *Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145). 09/2008 42 Not for new design. Use new F611-F612 Series. R60 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS PRODUCT CODE: R60 WOUND VERSION Rated Cap. 0.68 F 1.0 F 1.5 F 2.2 F 3.3 F 3.3 F 4.7 F 4.7 F 6.8 F 3.3 F 4.7 F 6.8 F 10.0 F 15.0 F 10.0 F 15.0 F 22.0 F 33.0 F 47.0 F 68.0 F 100.0 F 22.0 F 33.0 F 47.0 F 68.0 F 100.0 F 150.0 F 220.0 F Rated Cap. 0.33 F 0.47 F 0.68 F 1.0 F 1.5 F 2.2 F 2.2 F 3.3 F 3.3 F 4.7 F 1.5 F 2.2 F 3.3 F 4.7 F 6.8 F 10.0 F 4.7 F 6.8 F 10.0 F 15.0 F 22.0 F 33.0 F 47.0 F 68.0 F 15.0 F 22.0 F 33.0 F 47.0 F 68.0 F 100.0 F 150.0 F 63Vdc/40Vac Max dv/dt Std dimensions B H L p (V/s) 5.0 11.0 18.0 15.0 2.5 5.0 11.0 18.0 15.0 2.5 5.0 11.0 18.0 15.0 2.5 6.0 12.0 18.0 15.0 2.5 7.5 13.5 18.0 15.0 2.5 9.0 12.5 18.0 15.0 2.5 8.5 14.5 18.0 15.0 2.5 13.0 12.0 18.0 15.0 2.5 10.0 16.0 18.0 15.0 2.5 6.0 15.0 26.5 22.5 1.5 7.0 16.0 26.5 22.5 1.5 7.0 16.0 26.5 22.5 1.5 8.5 17.0 26.5 22.5 1.5 11.0 20.0 26.5 22.5 1.5 9.0 17.0 32.0 27.5 1.0 9.0 17.0 32.0 27.5 1.0 11.0 20.0 32.0 27.5 1.0 13.0 22.0 32.0 27.5 1.0 14.0 28.0 32.0 27.5 1.0 18.0 33.0 32.0 27.5 1.0 22.0 37.0 32.0 27.5 1.0 11.0 22.0 41.5 37.5 0.8 11.0 22.0 41.5 37.5 0.8 13.0 24.0 41.5 37.5 0.8 19.0 32.0 41.5 37.5 0.8 19.0 32.0 41.5 37.5 0.8 20.0 40.0 41.5 37.5 0.8 24.0 44.0 41.5 37.5 0.8 100Vdc/63Vac Std dimensions B H L p 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 7.5 13.5 18.0 15.0 8.5 14.5 18.0 15.0 9.0 12.5 18.0 15.0 10.0 16.0 18.0 15.0 13.0 12.0 18.0 15.0 11.0 19.0 18.0 15.0 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 7.0 16.0 26.5 22.5 8.5 17.0 26.5 22.5 10.0 18.5 26.5 22.5 13.0 22.0 26.5 22.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 11.0 20.0 32.0 27.5 13.0 22.0 32.0 27.5 14.0 28.0 32.0 27.5 18.0 33.0 32.0 27.5 22.0 37.0 32.0 27.5 11.0 22.0 41.5 37.5 11.0 22.0 41.5 37.5 13.0 24.0 41.5 37.5 16.0 28.5 41.5 37.5 19.0 32.0 41.5 37.5 20.0 40.0 41.5 37.5 24.0 44.0 41.5 37.5 Max dv/dt (V/s) 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.0 2.0 2.0 2.0 2.0 2.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Max K0 R60DI 3680--3-R60DI 4100--3-R60DI 4150--3-R60DI 4220--3-R60DI 4330--3-R60DI 4330--L-R60DI 4470--3-R60DI 4470--L-R60DI 4680--3-R60DN4330--3-R60DN4470--3-R60DN4680--3-R60DN5100--3-R60DN5150--3-R60DR5100--3-R60DR5150--4-R60DR5220--4-R60DR5330--4-R60DR5470--4-R60DR5680--4-R60DR6100--0-R60DW5220--3-R60DW5330--4-R60DW5470--4-R60DW5680--3-R60DW6100--4-R60DW6150--0-R60DW6220--0-- Max K0 Part Number (V2/s) 0.6 E3 0.6 E3 0.6 E3 0.6 E3 0.6 E3 0.6 E3 0.6 E3 0.6 E3 0.6 E3 0.6 E3 0.4 E3 0.4 E3 0.4 E3 0.4 E3 0.4 E3 0.4 E3 0.3 E3 0.3 E3 0.3 E3 0.3 E3 0.3 E3 0.3 E3 0.3 E3 0.3 E3 0.2 E3 0.2 E3 0.2 E3 0.2 E3 0.2 E3 0.2 E3 0.2 E3 Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) All dimensions are in mm. Part Number (V2/s) 0.32 E3 0.32 E3 0.32 E3 0.32 E3 0.32 E3 0.32 E3 0.32 E3 0.32 E3 0.32 E3 0.19 E3 0.19 E3 0.19 E3 0.19 E3 0.19 E3 0.13 E3 0.13 E3 0.13 E3 0.13 E3 0.13 E3 0.13 E3 0.13 E3 0.10 E3 0.10 E3 0.10 E3 0.10 E3 0.10 E3 0.10 E3 0.10 E3 R60EI 3330--3-R60EI 3470--3-R60EI 3680--3-R60EI 4100--3-R60EI 4150--3-R60EI 4220--3-R60EI 4220--L-R60EI 4330--3-R60EI 4330--L-R60EI 4470--3-R60EN 4150--3-R60EN 4220--3-R60EN 4330--3-R60EN 4470--3-R60EN 4680--3-R60EN 5100--3-R60ER 4470--3-R60ER 4680--3-R60ER 5100--4-R60ER 5150--4-R60ER 5220--4-R60ER 5330--4-R60ER 5470--4-R60ER 5680--0-R60EW5150--4-R60EW5220--4-R60EW5330--4-R60EW5470--4-R60EW5680--5-R60EW6100--0-R60EW6150--0-- Rated Cap. 0.33 F 0.47 F 0.68 F 1.0 F 1.5 F 1.5 F 2.2 F 2.2 F 3.3 F 1.5 F 2.2 F 3.3 F 4.7 F 6.8 F 3.3 F 4.7 F 6.8 F 10.0 F 15.0 F 22.0 F 33.0 F 47.0 F 68.0 F 10.0 F 15.0 F 22.0 F 33.0 F 47.0 F 68.0 F 100.0 F 150.0 F Rated Cap. 0.10 0.15 0.22 0.33 0.47 0.68 0.68 1.0 1.0 1.5 0.47 0.68 1.0 1.5 2.2 3.3 1.5 2.2 3.3 4.7 6.8 10.0 15.0 22.0 33.0 4.7 6.8 10.0 15.0 22.0 33.0 47.0 68.0 F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F 160Vdc/90Vac Max dv/dt Std dimensions B H L p (V/s) 5.0 11.0 18.0 15.0 9.0 5.0 11.0 18.0 15.0 9.0 5.0 11.0 18.0 15.0 9.0 7.5 13.5 18.0 15.0 9.0 8.5 14.5 18.0 15.0 9.0 9.0 12.5 18.0 15.0 9.0 10.0 16.0 18.0 15.0 9.0 13.0 12.0 18.0 15.0 9.0 11.0 19.0 18.0 15.0 9.0 6.0 15.0 26.5 22.5 5.5 7.0 16.0 26.5 22.5 5.5 8.5 17.0 26.5 22.5 5.5 11.0 20.0 26.5 22.5 5.5 13.0 22.0 26.5 22.5 5.5 9.0 17.0 32.0 27.5 3.0 9.0 17.0 32.0 27.5 3.0 9.0 17.0 32.0 27.5 3.0 9.0 17.0 32.0 27.5 3.0 11.0 20.0 32.0 27.5 3.0 13.0 22.0 32.0 27.5 3.0 14.0 28.0 32.0 27.5 3.0 18.0 33.0 32.0 27.5 3.0 22.0 37.0 32.0 27.5 3.0 11.0 22.0 41.5 37.5 2.0 11.0 22.0 41.5 37.5 2.0 11.0 22.0 41.5 37.5 2.0 13.0 24.0 41.5 37.5 2.0 16.0 28.5 41.5 37.5 2.0 19.0 32.0 41.5 37.5 2.0 20.0 40.0 41.5 37.5 2.0 30.0 45.0 41.5 37.5 2.0 Max K0 Part Number (V2/s) 2.90 E3 2.90 E3 2.90 E3 2.90 E3 2.90 E3 2.90 E3 2.90 E3 2.90 E3 2.90 E3 1.70 E3 1.70 E3 1.70 E3 1.70 E3 1.70 E3 0.96 E3 0.96 E3 0.96 E3 0.96 E3 0.96 E3 0.96 E3 0.96 E3 0.96 E3 0.96 E3 0.64 E3 0.64 E3 0.64 E3 0.64 E3 0.64 E3 0.64 E3 0.64 E3 0.64 E3 R60GI 3330--3-R60GI 3470--3-R60GI 3680--3-R60GI 4100--3-R60GI 4150--3-R60GI 4150--L-R60GI 4220--3-R60GI 4220--L-R60GI 4330--3-R60GN4150--3-R60GN4220--3-R60GN4330--3-R60GN4470--3-R60GN4680--3-R60GR4330--3-R60GR4470--3-R60GR4680--4-R60GR5100--4-R60GR5150--4-R60GR5220--4-R60GR5330--0-R60GR5470--0-R60GR5680--0-R60GW5100--3-R60GW5150--4-R60GW5220--4-R60GW5330--4-R60GW5470--4-R60GW5680--0-R60GW6100--0-R60GW6150--0-- 250Vdc/160Vac Max dv/dt Max K0 Std dimensions B H L p (V/s) (V2/s) 5.0 11.0 18.0 15.0 12 6.0 E3 5.0 11.0 18.0 15.0 12 6.0 E3 5.0 11.0 18.0 15.0 12 6.0 E3 5.0 11.0 18.0 15.0 12 6.0 E3 6.0 12.0 18.0 15.0 12 6.0 E3 7.5 13.5 18.0 15.0 12 6.0 E3 9.0 12.5 18.0 15.0 12 6.0 E3 8.5 14.5 18.0 15.0 12 6.0 E3 13.0 12.0 18.0 15.0 12 6.0 E3 10.0 16.0 18.0 15.0 12 6.0 E3 6.0 15.0 26.5 22.5 8 4.0 E3 6.0 15.0 26.5 22.5 8 4.0 E3 6.0 15.0 26.5 22.5 8 4.0 E3 7.0 16.0 26.5 22.5 8 4.0 E3 10.0 18.5 26.5 22.5 8 4.0 E3 11.0 20.0 26.5 22.5 8 4.0 E3 9.0 17.0 32.0 27.5 5 2.5 E3 9.0 17.0 32.0 27.5 5 2.5 E3 9.0 17.0 32.0 27.5 5 2.5 E3 9.0 17.0 32.0 27.5 5 2.5 E3 11.0 20.0 32.0 27.5 5 2.5 E3 13.0 22.0 32.0 27.5 5 2.5 E3 14.0 28.0 32.0 27.5 5 2.5 E3 18.0 33.0 32.0 27.5 5 2.5 E3 22.0 37.0 32.0 27.5 5 2.5 E3 11.0 22.0 41.5 37.5 4 2.0 E3 11.0 22.0 41.5 37.5 4 2.0 E3 11.0 22.0 41.5 37.5 4 2.0 E3 13.0 24.0 41.5 37.5 4 2.0 E3 16.0 28.5 41.5 37.5 4 2.0 E3 19.0 32.0 41.5 37.5 4 2.0 E3 20.0 40.0 41.5 37.5 4 2.0 E3 24.0 44.0 41.5 37.5 4 2.0 E3 Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) Part Number R60II 3100--3-R60II 3150--3-R60II 3220--3-R60II 3330--3-R60II 3470--3-R60II 3680--3-R60II 3680--L-R60II 4100--3-R60II 4100--L-R60II 4150--3-R60IN 3470--3-R60IN 3680--3-R60IN 4100--3-R60IN 4150--3-R60IN 4220--3-R60IN 4330--3-R60IR 4150--3-R60IR 4220--3-R60IR 4330--4-R60IR 4470--4-R60IR 4680--4-R60IR 5100--4-R60IR 5150--4-R60IR 5220--0-R60IR 5330--0-R60IW 4470--3-R60IW 4680--4-R60IW 5100--4-R60IW 5150--4-R60IW 5220--4-R60IW 5330--4-R60IW 5470--0-R60IW 5680--0-- Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. 43 09/2008 Not for new design. Use new F611-F612 Series. R60 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS PRODUCT CODE: R60 WOUND VERSION Rated Cap. 0.015 F 0.022 F 0.033 F 0.047 F 0.068 F 0.068 F 0.10 F 0.10 F 0.15 F 0.022 F 0.047 F 0.068 F 0.10 F 0.15 F 0.22 F 0.22 F 0.33 F 0.33 F 0.47 F 0.47 F 0.47 F 0.47 F 0.68 F 0.68 F 0.68 F 1.0 F 0.22 F 0.33 F 0.47 F 0.68 F 0.68 F 1.0 F 1.0 F 1.5 F 1.5 F 2.2 F 0.68 F 1.0 F 1.5 F 2.2 F 3.3 F 4.7 F 6.8 F 10.0 F 3.3 F 4.7 F 6.8 F 10.0 F 15.0 F 22.0 F 33.0 F 400Vdc/200Vac Std dimensions B H L p 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 5.0 11.0 13.0 10.0 5.0 11.0 13.0 10.0 6.0 12.0 13.0 10.0 6.0 12.0 13.0 10.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 6.0 12.0 18.0 15.0 7.5 13.5 18.0 15.0 9.0 12.5 18.0 15.0 7.5 13.5 18.0 15.0 8.5 14.5 18.0 15.0 9.0 12.5 18.0 15.0 13.0 12.0 18.0 15.0 10.0 16.0 18.0 15.0 11.0 19.0 18.0 15.0 13.0 12.0 18.0 15.0 11.0 19.0 18.0 15.0 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 7.0 16.0 26.5 22.5 8.5 17.0 26.5 22.5 10.0 18.5 26.5 22.5 10.0 18.5 26.5 22.5 11.0 20.0 26.5 22.5 13.0 22.0 26.5 22.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 11.0 20.0 32.0 27.5 13.0 22.0 32.0 27.5 14.0 28.0 32.0 27.5 18.0 33.0 32.0 27.5 22.0 37.0 32.0 27.5 11.0 22.0 41.5 37.5 11.0 22.0 41.5 37.5 13.0 24.0 41.5 37.5 16.0 28.5 41.5 37.5 24.0 44.0 41.5 37.5 24.0 44.0 41.5 37.5 30.0 45.0 41.5 37.5 Max dv/dt (V/s) 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 6.0 6.0 6.0 6.0 6.0 6.0 6.0 Max K0 (V /s) 24.0 E3 24.0 E3 24.0 E3 24.0 E3 24.0 E3 24.0 E3 24.0 E3 24.0 E3 24.0 E3 16.0 E3 16.0 E3 16.0 E3 16.0 E3 16.0 E3 16.0 E3 16.0 E3 16.0 E3 16.0 E3 16.0 E3 16.0 E3 16.0 E3 16.0 E3 16.0 E3 16.0 E3 16.0 E3 16.0 E3 8.0 E3 8.0 E3 8.0 E3 8.0 E3 8.0 E3 8.0 E3 8.0 E3 8.0 E3 8.0 E3 8.0 E3 3.4 E3 3.4 E3 3.4 E3 3.4 E3 3.4 E3 3.4 E3 3.4 E3 3.4 E3 2.4 E3 2.4 E3 2.4 E3 2.4 E3 2.4 E3 2.4 E3 2.4 E3 Part Number 2 R60MF2150--3-R60MF 2220--3-R60MF 2330--3-R60MF 2470--3-R60MF 2680--4-R60MF 2680--3-R60MF 3100--4-R60MF 3100--3-R60MF 3150--3-R60MI 2220--3-R60MI 2470--3-R60MI 2680--3-R60MI 3100--3-R60MI 3150--3-R60MI 3220--4-R60MI 3220--3-R60MI 3330--3-R60MI 3330--L-R60MI 3470--4-R60MI 3470--3-R60MI 3470--L1R60MI 3470--L-R60MI 3680--4-R60MI 3680--3-R60MI 3680--L-R60MI 4100--3-R60MN3220--3-R60MN3330--3-R60MN3470--3-R60MN3680--4-R60MN3680--3-R60MN4100--4-R60MN4100--3-R60MN4150--4-R60MN4150--3-R60MN4220--3-R60MR3680--3-R60MR4100--3-R60MR4150--4-R60MR4220--4-R60MR4330--4-R60MR4470--4-R60MR4680--4-R60MR5100--4-R60MW4330--3-R60MW4470--4-R60MW4680--4-R60MW5100--4-R60MW5150--3-R60MW5220--4-R60MW5330--4-- Rated Cap. 630Vdc/220*Vac Std dimensions B H L p 4700 pF 4.0 9.0 13.0 10.0 6800 pF 4.0 9.0 13.0 10.0 0.010 F 4.0 9.0 13.0 10.0 0.015 F 4.0 9.0 13.0 10.0 0.022 F 4.0 9.0 13.0 10.0 0.022 F 5.0 11.0 13.0 10.0 0.033 F 5.0 11.0 13.0 10.0 0.033 F 6.0 12.0 13.0 10.0 0.047 F 6.0 12.0 13.0 10.0 0.033 F 5.0 11.0 18.0 15.0 0.047 F 5.0 11.0 18.0 15.0 0.068 F 5.0 11.0 18.0 15.0 0.068 F 6.0 12.0 18.0 15.0 0.10 F 6.0 12.0 18.0 15.0 0.10 F 7.5 13.5 18.0 15.0 0.10 F 9.0 12.5 18.0 15.0 0.15 F 7.5 13.5 18.0 15.0 0.15 F 8.5 14.5 18.0 15.0 0.22 F 8.5 14.5 18.0 15.0 0.22 F 10.0 16.0 18.0 15.0 0.33 F 10.0 16.0 18.0 15.0 0.10 F 6.0 15.0 26.5 22.5 0.15 F 6.0 15.0 26.5 22.5 0.22 F 6.0 15.0 26.5 22.5 0.22 F 7.0 16.0 26.5 22.5 0.33 F 7.0 16.0 26.5 22.5 0.33 F 8.5 17.0 26.5 22.5 0.33 F 10.0 18.5 26.5 22.5 0.47 F 10.0 18.5 26.5 22.5 0.47 F 11.0 20.0 26.5 22.5 0.68 F 11.0 20.0 26.5 22.5 0.68 F 13.0 22.0 26.5 22.5 0.33 F 9.0 17.0 32.0 27.5 0.47 F 9.0 17.0 32.0 27.5 0.68 F 11.0 20.0 32.0 27.5 1.0 F 11.0 20.0 32.0 27.5 1.5 F 18.0 33.0 32.0 27.5 2.2 F 18.0 33.0 32.0 27.5 3.3 F 22.0 37.0 32.0 27.5 4.7 F 22.0 37.0 32.0 27.5 1.0 F 11.0 22.0 41.5 37.5 1.5 F 11.0 22.0 41.5 37.5 2.2 F 13.0 24.0 41.5 37.5 3.3 F 16.0 28.5 41.5 37.5 4.7 F 19.0 32.0 41.5 37.5 6.8 F 20.0 40.0 41.5 37.5 10.0 F 24.0 44.0 41.5 37.5 Max dv/dt (V/s) 40 40 40 40 40 40 40 40 40 25 25 25 25 25 25 25 25 25 25 25 25 12 12 12 12 12 12 12 12 12 12 12 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 Max K0 (V /s) 50 E3 50 E3 50 E3 50 E3 50 E3 50 E3 50 E3 50 E3 50 E3 31 E3 31 E3 31 E3 31 E3 31 E3 31 E3 31 E3 31 E3 31 E3 31 E3 31 E3 31 E3 15 E3 15 E3 15 E3 15 E3 15 E3 15 E3 15 E3 15 E3 15 E3 15 E3 15 E3 12 E3 12 E3 12 E3 12 E3 12 E3 12 E3 12 E3 12 E3 9.6 E3 9.6 E3 9.6 E3 9.6 E3 9.6 E3 9.6 E3 9.6 E3 Part Number 2 R60PF 1470--3-R60PF 1680--3-R60PF 2100--3-R60PF 2150--3-R60PF 2220--4-R60PF 2220--3-R60PF 2330--4-R60PF 2330--3-R60PF 2470--3-R60PI 2330--3-R60PI 2470--3-R60PI 2680--4-R60PI 2680--3-R60PI 3100--4-R60PI 3100--3-R60PI 3100--L-R60PI 3150--4-R60PI 3150--3-R60PI 3220--4-R60PI 3220--3-R60PI 3330--3-R60PN 3100--3-R60PN 3150--3-R60PN 3220--4-R60PN 3220--3-R60PN 3330--5-R60PN 3330--4-R60PN 3330--3-R60PN 3470--4-R60PN 3470--3-R60PN 3680--4-R60PN 3680--3-R60PR 3330--3-R60PR 3470--4-R60PR 3680--4-R60PR 4100--5-R60PR 4150--3-R60PR 4220--4-R60PR 4330--4-R60PR 4470--4-R60PW4100--3-R60PW4150--4-R60PW4220--4-R60PW4330--4-R60PW4470--4-R60PW4680--0-R60PW5100--4-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. * Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145). 09/2008 44 Not for new design. Use new F611-F612 Series. R60 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS PRODUCT CODE: R60 WOUND VERSION Rated Cap. 1000 pF 1500 pF 2200 pF 3300 pF 4700 pF 6800 pF 0.010 F 0.015 F 0.022F 0.033 F 0.033 F 0.047 F 0.047 F 0.068 F 0.033 F 0.047 F 0.068 F 0.10 F 0.15 F 0.15 F 0.22 F 0.33 F 0.47 F 0.68 F 1.00 F 1.50 F 0.47 F 0.68 F 1.00 F 1.50 F 2.20 F 3.30 F 4.70 F 1000Vdc/250Vac* Std dimensions B H L p 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 5.0 11.0 13.0 10.0 6.0 12.0 13.0 10.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 6.0 12.0 18.0 15.0 7.5 13.5 18.0 15.0 9.0 12.5 18.0 15.0 10.0 16.0 18.0 15.0 13.0 12.0 18.0 15.0 11.0 19.0 18.0 15.0 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 7.0 16.0 26.5 22.5 8.5 17.0 26.5 22.5 13.0 22.0 26.5 22.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 11.0 20.0 32.0 27.5 13.0 22.0 32.0 27.5 14.0 28.0 32.0 27.5 18.0 33.0 32.0 27.5 22.0 37.0 32.0 27.5 11.0 22.0 41.5 37.5 11.0 22.0 41.5 37.5 13.0 24.0 41.5 37.5 16.0 28.5 41.5 37.5 19.0 32.0 41.5 37.5 24.0 44.0 41.5 37.5 30.0 45.0 41.5 37.5 Max dv/dt (V/s) 60 60 60 60 60 60 30 30 30 30 30 30 30 30 15 15 15 15 15 12 12 12 12 12 12 12 10 10 10 10 10 10 10 Max K0 Part Number (V2/s) 120 E3 120 E3 120 E3 120 E3 120 E3 120 E3 60 E3 60 E3 60 E3 60 E3 60 E3 60 E3 60 E3 60 E3 30 E3 30 E3 30 E3 30 E3 30 E3 24 E3 24 E3 24 E3 24 E3 24 E3 24 E3 24 E3 20 E3 20 E3 20 E3 20 E3 20 E3 20 E3 20 E3 R60QF 1100--0-R60QF 1150--0-R60QF 1220--0-R60QF 1330--0-R60QF 1470--0-R60QF 1680--0-R60QI 2100--0-R60QI 2150--3-R60QI 2220--3-R60QI 2330--3-R60QI 2330--L-R60QI 2470--0-R60QI 2470--L-R60QI 2680--0-R60QN2330--0-R60QN2470--0-R60QN2680--3-R60QN3100--3-R60QN3150--0-R60QR3150--3-R60QR3220--4-R60QR3330--4-R60QR3470--4-R60QR3680--4-R60QR4100--4-R60QR4150--4-R60QW3470--3-R60QW3680--4-R60QW4100--4-R60QW4150--4-R60QW4220--3-R60QW4330--0-R60QW4470--4-- All dimensions are in mm. Note 1: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. Note 2: Rated voltages higher than 1000Vdc are available upon request. * Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 151). Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) 45 09/2008 Not for new design. Use new F611-F612 Series. R60 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS PRODUCT CODE: R60 electrical characteristics Rated voltage (VR):050Vdc - 63Vdc -100Vdc - 160Vdc 250Vdc - 400Vdc - 630Vdc-1000Vdc . Rated temperature (TR): +85C Temperature derated voltage: test method and performance Damp heat, steady state: Test conditions for temperatures between +85C and +125C a decreasing factor of 1.25% per degree C on the rated voltage VR (d.c. and a.c.) has to be applied. Capacitance range: 1000pF to 220F Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 5% Temperature: Relative humidity (RH): Test duration: Performance Capacitance change |C/C|: 5% DF change (tg): 50x10-4 at 1kHz 50% of initial limit. Insulation resistance: Endurance: Test conditions Temperature: Test duration: Voltage applied: (J); 10% (K); 20% (M). Total self-inductance (L): (lead length ~2mm) Pitch (mm) 10 15 22.5 27.5 37.5 L(nH) 9 10 18 18 22 Performance tg 10-4 at +25C 5C C1F C>1F 1 10 100 150 100 Test conditions Solder bath temperature: +260C5C Dipping time (with heat screen):10 s 1 s Insulation resistance: Performance Test conditions Temperature: Voltage charge time: Voltage charge: Performance For VR 100 Vdc for 3750 M 1250 s for For VR >100 Vdc 30000 M for 10000 s for +105C2C 2000 h 1.25xVC Capacitance change |C/C|: 5% 50x10-4 at 10kHz for C1F DF change (tg): 30x10-4 at 01kHz for C>1F Insulation resistance: 50% of initial limit. Resistance to soldering heat: Dissipation factor (DF): kHz +40C2C 93% 2% 56 days +25C5C 1 min 50 Vdc for VR <100 Vdc 100 Vdc for VR 100 Vdc C 0.33F C >0.33F (50000 M)* (5000 s)* C 0.33F C >0.33F (50000 M)* (17000 s)* *Typical value Test voltage between terminations: 1.6xVR applied for 2 s at +25C5C Capacitance change |C/C|: 2% 50x10-4 at 10kHz for C1F DF change (tg): 30x10-4 at 01kHz for C>1F Insulation resistance: initial limit. Long term stability (after two years): Storage: standard environmental conditions (see page 12). Performance Capacitance change |C/C|: 3% for C 0.1F 2% for C >0.1F Reliability: Reference MIL HDB 217 Application conditions: Temperature: +40C2C Voltage: 0.5xVR Failure rate: 5 FIT (1 FIT = 1x10-9 failures/componentsxh) Failure criteria: Short or open circuit Capacitance change |C/C|: >10% DF change (tg): >2xinitial limit. Insulation resistance: <0.005xinitial limit. 09/2008 46 Not for new design. Use new F611-F612 Series. R60 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS PRODUCT CODE: R60 MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40C) Note: p (pitch) in mm. 47 09/2008 Not for new design. Use new F611-F612 Series. R60 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS PRODUCT CODE: R60 MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40C) Digitally signed by Marcy Brand DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation, ou=Marketing Communications, cn=Marcy Brand, email=marcybrand@kemet.com Date: 2012.07.18 12:10:38 -04'00' Note: p (pitch) in mm. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.