IMC1210SY10NM - Vishay [Dale] - Datasheet.Company

Document Number: 34043 For technical questions, contact: magnetics@vishay.com www.vishay.com

Revision: 15-Mar-11 1

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

Wirewound, Surface Mount Molded Inductors

IMC-1210

Vishay Dale

Note

(1) Rated DC current based on the maximum temperature rise, not

to exceed 40 °C at + 85 °C ambient

FEATURES

• Printed marking

• Molded construction provides superior strength

and moisture resistance

• Compatible with vapor phase and infrared reflow

soldering

• Tape and reel packaging for automatic handling,

2000/reel, EIA-481

• Compliant to RoHS Directive 2002/95/EC

ELECTRICAL SPECIFICATIONS

Inductance Range: 0.01 μH to 220 μH

Inductance and Tolerance: ± 20 % for 0.01 μH to 0.82 μH,

± 10 % for 1.0 μH to 220 μH standard. Special tolerances

available.

Operating Temperature: - 55 °C to + 125 °C

Coilform Material: Non-magnetic from 0.01 μH to 0.10 μH

Powdered iron from 0.12 μH to 100 μH

Ferrite from 120 μH to 220 μH

TEST EQUIPMENT

• HP4342A Q meter with Vishay Dale test fixture or equivalent

• HP4191A RF impedance analyzer (for SRF measurements)

• Wheatstone brigde

STANDARD ELECTRICAL SPECIFICATIONS

IND.

(μH) TOL.

TEST FREQ.

(MHz) Q

MIN.

SRF

MIN.

(MHz)

DCR

MAX.

()

RATED DC

CURRENT

(mA) (1)

L & Q

0.010 20 % 50 30 1000 0.13 734

0.012 20 % 50 30 1000 0.14 707

0.015 20 % 50 30 1000 0.16 661

0.018 20 % 50 30 1000 0.18 624

0.022 20 % 50 30 1000 0.20 592

0.027 20 % 50 30 1000 0.22 564

0.033 20 % 50 30 1000 0.24 540

0.039 20 % 50 30 1000 0.27 530

0.047 20 % 50 30 1000 0.30 483

0.056 20 % 50 30 1000 0.33 470

0.068 20 % 50 30 1000 0.36 450

0.082 20 % 50 30 900 0.40 450

0.10 20 % 50 30 700 0.44 450

0.12 20 % 25.2 30 500 0.22 584

0.15 20 % 25.2 30 450 0.25 548

0.18 20 % 25.2 30 400 0.28 518

0.22 20 % 25.2 30 350 0.32 484

0.27 20 % 25.2 30 320 0.36 456

0.33 20 % 25.2 30 300 0.40 453

0.39 20 % 25.2 30 250 0.45 450

0.47 20 % 25.2 30 220 0.50 450

0.56 20 % 25.2 30 180 0.55 450

0.68 20 % 25.2 30 160 0.60 450

0.82 20 % 25.2 30 140 0.67 450

1.0 10 % 7.96 30 120 0.70 400

1.2 10 % 7.96 30 100 0.75 390

1.5 10 % 7.96 30 85 0.85 370

1.8 10 % 7.96 30 80 0.90 350

2.2 10 % 7.96 30 75 1.0 320

2.7 10 % 7.96 30 70 1.1 290

3.3 10 % 7.96 30 60 1.2 260

3.9 10 % 7.96 30 55 1.3 250

4.7 10 % 7.96 30 50 1.5 224

5.6 10 % 7.96 30 45 1.6 217

6.8 10 % 7.96 30 40 1.8 204

8.2 10 % 7.96 30 38 2.0 194

10 10 % 2.52 30 33 2.1 189

12 10 % 2.52 30 30 2.5 173

15 10 % 2.52 30 21 2.8 164

18 10 % 2.52 30 20 3.3 151

22 10 % 2.52 30 19 3.7 145

27 10 % 2.52 30 18 5.0 122

33 10 % 2.52 30 16 6.0 112

39 10 % 2.52 30 15 7.0 104

47 10 % 2.52 30 14 9.0 91

56 10 % 2.52 30 12 10.0 87

68 10 % 2.52 30 11 11.0 83

82 10 % 2.52 30 10 12.0 79

100 10 % 0.796 20 9 14.0 73

120 10 % 0.796 15 8 11.0 70

150 10 % 0.796 15 6.5 15.0 65

180 10 % 0.796 15 6 17.0 60

220 10 % 0.796 15 6 21.0 50

DIMENSIONS in inches [millimeters]

PART MARKING

- Vishay Dale

- Inductance value

- Date code

Guidelines for

Parallel Component

Printed Circuit

Mounting Pads on

IMC-1210-100

Chip Inductors

0.006

[0.152]

Ref.

Typ.

0.040

[1.02]

0.098 ± 0.008

[2.49 ± 0.203]

0.030

[0.762]

Typ.

0.126 ± 0.008

[3.20 ± 0.203]

0.028 ± 0.004

[0.711 ± 0.102]

Typ. 0.073

[1.85]

Ref.

0.087 ± 0.008

[2.21 ± 0.203]

0.118

[3.0]

0.118

[3.0]

0.039

[1.0]

0.039

[1.0] 0.070

[1.8]

0.138

[3.5] 0.020 (1)

[0.5]

Note

(1) Recommended spacing between components

DESCRIPTION

IMC-1210 10 μH ± 10 % ER e3

MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD

GLOBAL PART NUMBER

IMC 1210 ER 100 K

PRODUCT

FAMILY

SIZE PACKAGE

CODE

INDUCTANCE

VALUE

TOL.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.