US2GA - ON SEMICONDUCTOR - Datasheet.Company

January, 2019 − Rev. 3

1Publication Order Number:

US2AA/D

US2AA-US2MA

Super Fast Surface Mount

Rectifiers

Features

•Glass Passivated Chip Junction

•High Surge Capacity

•Low Forward Voltage Drop

•Fast Switching with Reverse Recovery Time: 50∼75 ns Maximum

•UL Flammability 94 V − 0 Classification

•MSL 1 per J−STD−020

•RoHS Compliant / Green Molding Compound

•NRV Prefix for Automotive and Other Applications Requiring

Unique Site and Control Change Requirements; AEC−Q101

Qualified and PPAP Capable*

Table 1. ORDERING INFORMATION

Part Number Top Mark Package

Packing

Method

US2AA,

NRVUS2AA*

US2AA DO−214AC (SMA) Tape and Reel

US2BA,

NRVUS2BA*

US2BA DO−214AC (SMA) Tape and Reel

US2DA,

NRVUS2DA*

US2DA DO−214AC (SMA) Tape and Reel

US2FA,

NRVUS2FA*

US2FA DO−214AC (SMA) Tape and Reel

US2GA,

NRVUS2GA*

US2GA DO−214AC (SMA) Tape and Reel

US2JA,

NRVUS2JA*

US2JA DO−214AC (SMA) Tape and Reel

US2KA,

NRVUS2KA*

US2KA DO−214AC (SMA) Tape and Reel

US2MA,

NRVUS2MA*

US2MA DO−214AC (SMA) Tape and Reel

www.onsemi.com

SMA/DO−214AC

COLOR BAND DENOTES CATHODE

Cathode Anode

$Y&Z&3

US2XA

MARKING DIAGRAM

$Y = ON Semiconductor Logo

&Z = Assembly Plant Code

&3 = Data Code (Year & Week)

US2XA = Specific Device Code

X = A/B/D/F/G/J/K/M

US2AA−US2MA

www.onsemi.com

Table 2. ABSOLUTE MAXIMUM RATINGS

Symbol Parameter Unit

US2

VRRM Repetitive Peak Reverse Voltage 50 100 200 300 400 600 800 1000 V

VRMS RMS Reverse Voltage 35 70 140 210 280 420 560 700 V

VDC DC Blocking Voltage 50 100 200 300 400 600 800 1000 V

IF(AV) Average Forward Rectified Current 1.5 A

IFSM Peak Forward Surge Current,

8.3 ms Single Half−Sine Wave,

Superimposed on Rated Load

50 A

TJOperating Junction Temperature Range −55 to +150 °C

TSTG Storage Temperature Range −55 to +150 °C

Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality

should not be assumed, damage may occur and reliability may be affected.

Table 3. THERMAL CHARACTERISTICS (NOTE 1) (Values are at TA = 25°C unless otherwise noted)

Symbol Parameter Value Unit

RqJA Typical Thermal Resistance, Junction−to−Ambient 189 °C/W

YJL Typical Thermal Characteristics, Junction−to−Lead (with Reference to Cathode Pin) 31 °C/W

1. Device mounted at minimum pad.

Table 4. ELECTRICAL CHARACTERISTICS (Values are at TA = 25°C unless otherwise noted)

Symbol Parameter

Value

Unit

US2

VFMaximum Instantaneous Forward Voltage (Note2)

at Rated VR

1.0 1.3 1.7 V

IRMaximum Re-

verse Current

at Rated VR

TJ = 25°C 5 mA

TJ = 125°C 100

TIT Maximum Reverse Recovery Time (Note 3) 50 75 ns

CJTypical Junction Capacitance (Note 4) 50 30 pF

2. Pulse test with PW = 300 ms, 1% duty cycle

3. Reverse recovery test conditions: IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A

4. Measured at 1 Mhz and applied reverse voltage of 4.0 V D.C.

US2AA−US2MA

www.onsemi.com

AVERAGE FORWARD

CURRENT (A)

LEAD TEMPERATURE (oC)

RESISTIVE OR

INDUCTIVE LOAD

INSTANTANEOUS REVERSE CURRENT

( A)

PERCENT OF RATED PEAK REVERSE VOLTAGE (%)

TJ=25

TJ=125

PEAK FORWARD SURGE C URRENT (A)

NUMBER OF CYCLES AT 60 Hz

8.3ms Single Half Sine Wave

INSTANTANEOUS FORWARD CURRENT (A)

CAPACITANCE (pF)

REVERSE VOLTAGE (V)

US2AA−US2GA

US2JA−US2MA

f=1.0MHz

Vslg=50mVp−p

Figure 1. Forward Current Derating Curve Figure 2. Typical Reverse Characteristics

Figure 3. Maximum Non−Repetitive Forward

Surge Current

Figure 4. Typical Forward Characteristics

Figure 5. Typical Forward Characteristics Figure 6. Typical Forward Characteristics

TYPICAL PERFORMANCE CHARACTERISTICS

FORWARD VOLTAGE (V)

INSTANTANEOUS FORWARD CURRENT (A)

US2AA−US2FA

US2GA

US2JA−US2MA

SMA

CASE 403AE

ISSUE O

DATE 31 AUG 2016

2.65

4.30

1.75

2.50 MAX

2.20

1.90

0.30

0.05

B0.203

0.050

2.05

1.95

B1.65

1.20

2.95

2.50

B5.60

4.80

B4.75

4.00

0.41

0.15

1.52

0.75

R0.15 4X

0.45

DETAIL A

SCALE 20 : 1

GAGE PLANE

NOTES:

A. EXCEPT WHERE NOTED, CONFORMS

TO JEDEC DO214 VARIATION AC.

BDOES NOT COMPLY JEDEC STANDARD

VALUE.

C. ALL DIMENSIONS ARE IN MILLIMETERS.

D. DIMENSIONS ARE EXCLUSIVE OF

BURRS, MOLD FLASH AND TIE BAR

PROTRUSIONS.

E. DIMENSIONS AND TOLERANCE AS

PER ASME Y14.5−2009.

E. LAND PATTERN STD. DIOM5025X231M

LAND PATTERN RECOMMENDATION

TOP VIEW

SIDE VIEW

0.13 MCBA

MECHANICAL CASE OUTLINE

PACKAGE DIMENSIONS

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding

the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically

disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the

rights of others.

98AON13440G

DOCUMENT NUMBER:

DESCRIPTION:

Electronic versions are uncontrolled except when accessed directly from the Document Repository.

Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

PAGE 1 OF 1

SMA

www.onsemi.com

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent

coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.

ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,

regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer

application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not

designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification

in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized

application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This

literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

TECHNICAL SUPPORT

North American Technical Support:

Voice Mail: 1 800−282−9855 Toll Free USA/Canada

Phone: 011 421 33 790 2910

LITERATURE FULFILLMENT:

Email Requests to: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Europe, Middle East and Africa Technical Support:

Phone: 00421 33 790 2910

For additional information, please contact your local Sales Representative

◊