61
PA Shorouded header
(Top entry type)
Retainer
Retainer
Retainer
PAF Receptacle
(IDC style)
PAL
(Crimp style Wire-to-wire)
PAF Receptacle
(IDC style)
Retainer
PA Receptacle
(Crimp style Retainer mountable type)
PA Receptacle
(Crimp style Standard type)
PA Shorouded header
(Side entry type)
PA Shorouded header
(Top entry type)
Features––––––––––––––––––––––––
• Secure locking device
The housing has a locking device to prevent accidental
disconnection because of routing of wires or of vibration, and
also reverse and different circuit numbers mating.
• Interchangeable between crimp and IDC socket
Both crimp and IDC sockets use the same headers and wire-to-
wire mating halves.
• Secondary retainers
Secondary retainers enhance safety in case of partial insertion
or accidental release of the contact.
• Harness variation
PAL, wire-to-wire crimp style connector, increases wire harness variation.
PA connector
(Standard type, Retainer mountable type)
• Highly reliable contact
The box contact supplies stable contact performance even under
conditions of vibration, distortion, low voltage or low current.
• Insertion guide mechanism
Header has housing insertion guides for easy and secure insertion.
• Flanged press pin
Top entry type header has flanged press pins, preventing
accidental removal of the pins that might result from the
distorted unmating especially in the case of small No. of circuits.
PAF connector
• The industry’s first secure lock IDC connectors
By separating ID section and secure lock section, the industry’s first
secure lock specification has been achieved for IDC that was said
to be impossible. Our fully automatic IDC machines, BCD-M5BP
(for simple harness) and CAM-M12B, SAD-M12E (for multi-
harness), can be applied for harness making.
• Metallic strain relief
Metallic strain relief on the contact securely grips wire insulation that
can avoid direct stress of vibration or impact. The same grip strength
as insulation barrel of crimp style contact could be achieved.
• Retainer with four locking points
The new four locking points design ensures wire retention force
of every direction that is almost superior to contact retention
force of crimp style connectors. It also completely covers
exposed terminated ID contact.
PAL connector
• The industry’s first wire to wire 2.0mm (.079")
pitch retainer mountable type connector.
• Either with or without panel lock can be
selected according to application.
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
PA
FAMILY SERIES/PA•PAF•PAL CONNECTOR
2.0mm
(.079") pitch
Wire-to-board (Crimp style/IDC) / Wire-to-wire (Crimp style/IDC)
Based upon wire-to-board crimp style PA
connectors, the PA series family of
connector have been expanded to meet the
requirement of complex wire harness of
2.0mm (.079") pitch connectors with secure
locking mechanism thanks to the
additional line up of wire-to-board IDC style
PAF connectors and wire-to-wire crimp
style PAL connectors.
62
PA FAMILY SERIES /PA•PAF•PAL CONNECTOR
List of combinations ––––––––––––––––––––––––––––––––––––––––––––––––––––––
Crimp style
Retainer mountable type
Insulation displacement type
Crimp style
Standard type
Contact
SPA
-
001T
-
P0.5
Housing
PARP
-
( )V
Retainer
PMS
-
( )V
-
S
Contact
SPHD
-
001T
-
P0.5
SPHD
-
002T
-
P0.5
Housing
PAP-( )V-S
Receptacle
( )PAF
-
6S
Retainer
PAFS
-
( )V
-
S
Wire to wire Connectors
High box type
SMT type
Top entry type Side entry type
Top entry type
Side entry type
Shrouded header
BM()B
-
PASS
BM()B
-
PASS
-
1
SM()B
-
PASS
SM()B
-
PASS
-
1
Shrouded header
B()B
-
PASK
B()B
-
PASK
-
1
S()B
-
PASK
-
2
Shrouded header
BH()B
-
PASK
BH()B
-
PASK
-
1
Contact
SPAL
-
001T
-
P0.5
SPAL
-
002T
-
P0.5
Receptacle housing
PALR
-
()V(F)
Retainer
PMS
-
()V
-
S
PA Connector (Standard type)
• Current rating: 3A AC, DC (AWG#22)
• Voltage rating: 250V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying electrical current)
• Contact resistance: Initial value/10m Ωmax.
After environmental testing/20m Ωmax.
• Insulation resistance: 1,000M Ωmin.
• Withstanding voltage: 800V AC/minute
• Applicable wire: AWG #28 to #22
• Applicable PC board thickness: 1.6mm(.063")
PA Connector (Retainer mountable type)
• Current rating: 3A AC, DC (AWG#22)
• Voltage rating: 100V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying electrical current)
• Contact resistance: Initial value/15m Ωmax.
After environmental testing/25m Ωmax.
• Insulation resistance: 1,000M Ωmin.
• Withstanding voltage: 800V AC/minute
• Applicable wire: AWG #28 to #22
PAF Connector
• Current rating: 1.0A AC, DC (AWG#26)
• Voltage rating: 100V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying electrical current)
• Contact resistance: Initial value/15m Ωmax.
After environmental testing/25m Ωmax.
• Insulation resistance: 1,000M Ωmin.
• Withstanding voltage: 800V AC/minute
• Applicable wire: UL1061
(Contact JST for details regarding other UL wires.)
AWG #26
Conductor/7 strands, tin-coated annealed copper
Insulation O.D./0.9 to 1.0mm(.035" to .039")
PAL Connector
• Current rating: 3A AC, DC (AWG#22)
• Voltage rating: 100V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying electrical current)
• Contact resistance: Initial value/15m Ωmax.
After environmental testing/25m Ωmax.
• Insulation resistance: 1,000M Ωmin.
• Withstanding voltage: 800V AC/minute
• Applicable wire: AWG #28 to #22
• Applicable panel thickness : 0.5 to 2.0mm(.020" to .079")
Specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
63
PA FAMILY SERIES /PA CONNECTOR (Crimp style Standard type)
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1.5(.059)
6.5(.256)
2.85(.112)
1.3(.051)
A
B
7.3(.287)
4.6(.181)
5.8(.228)
8.0(.315)
Circuit No.1
A
B
7.3(.287)
4.6(.181)
5.8(.228)
8.0(.315)
Circuit No.1
A
B
7.3(.287)
4.6(.181)
5.8(.228)
8.0(.315)
Circuit No.1
[2.0(.079)]
2.0(.079)
[2.0(.079)]
2.0(.079)
[2.0(.079)]
2.0(.079)
Model No. Applicable wire
Insulation O.D. mm(in.)
Material and Finish
Q'ty /
reel
Phosphor bronze, tin-plated
SPHD-001T-P0.5
SPHD-002T-P0.5 0.13 to 0.33
0.08 to 0.21 26 to 22
28 to 24
1.0 to 1.5(.039 to .059)
0.9 to 1.5(.035 to .059)
8,000
mm2AWG #
Circuits Model No.
Dimensions mm(in.)
AB
Material
Nylon 66, UL94V-0, natural (white)
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PAP-02V-S
PAP-03V-S
PAP-04V-S
PAP-05V-S
PAP-06V-S
PAP-07V-S
PAP-08V-S
PAP-09V-S
PAP-10V-S
PAP-11V-S
PAP-12V-S
PAP-13V-S
PAP-14V-S
PAP-15V-S
PAP-16V-S
2.0( .079)
4.0( .157)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
30.0(1.181)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
30.0(1.181)
32.0(1.260)
34.0(1.339)
5,000
5,000
5,000
5,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Q'ty /
bag
(2 to 9 circuits)
(10 to 15 circuits)
(16 circuits) <For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. PAP-02V-S-
S…natural (white)
K…black R…red E…blue M…green O…orange N…brown
P…purple PK…pink Y…yellow L…lemon yellow FY…vivid yellow
LE…light blue H…gray TR…tomato red
64
PA FAMILY SERIES /PA CONNECTOR (Crimp style Standard type)
Through-hole type shrouded header –––––––––––––––––––––––––––––––––––––––––
5.3(.209)
5.9(.232)
1.7(.067)
A
B
0.5(.020)
2.0
(.079)
1.5(.059)
1.2(.047)
7.7(.303)
3.0
(.118)
0.8(.031)dia.
Circuit No.1
A
B
0.5(.020)
2.0
(.079)
5.3(.209)
5.9(.232)
1.5(.059) 1.7(.067)
1.2(.047)
7.7(.303)
3.0
(.118)
0.8(.031)dia.
Circuit No.1
0.5(.020)
A
B
2.0
(.079)
1.5(.059)
1.2(.047)
7.7(.303)
3.0
(.118)
0.8(.031)dia.
5.3(.209)
5.9(.232)
1.7(.067)
Circuit No.1
Circuits
Dimensions mm(in.)
Model No.
AB
Material and Finish
Without a boss With a boss
Post: Copper alloy, copper-undercoated, tin/lead-plated
Wafer: Glass-filled PBT, UL94V-0, natural (white)
(Note1) Nylon 66, UL94V-0, vivid yellow
2
(Note1)
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
B02B-PAFYK-A
B02B-PASK
B03B-PASK
B04B-PASK
B05B-PASK
B06B-PASK
B07B-PASK
B08B-PASK
B09B-PASK
B10B-PASK
B11B-PASK
B12B-PASK
B13B-PASK
B14B-PASK
B15B-PASK
B16B-PASK
B02B-PAFYK-1A
B02B-PA
S
K-1
B03B-PA
S
K-1
B04B-PA
S
K-1
B05B-PA
S
K-1
B06B-PA
S
K-1
B07B-PA
S
K-1
B08B-PA
S
K-1
B09B-PA
S
K-1
B10B-PA
S
K-1
B11B-PA
S
K-1
B12B-PA
S
K-1
B13B-PA
S
K-1
B14B-PA
S
K-1
B15B-PA
S
K-1
B16B-PA
S
K-1
2.0( .079)
2.0( .079)
4.0( .157)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
30.0(1.181)
6.0( .236)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
30.0(1.181)
32.0(1.260)
34.0(1.339)
Q'ty /
box
1,000
1,000
1,000
1,000
500
500
500
500
500
500
250
250
250
250
250
250
(2 to 9circuits)
(10 to 15 circuits)
(16 circuits)
Top entry type
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B02B-PASK-
S…natural (white)
K…black R…red E…blue M…green O…orange N…brown
P…purple PK…pink Y…yellow L…lemon yellow FY…vivid yellow
LE…light blue H…gray TR…tomato red
65
PA FAMILY SERIES /PA CONNECTOR (Crimp style Standard type)
Through-hole type shrouded header –––––––––––––––––––––––––––––––––––––––––
2.0(.079)
7.7(.303)
A
B
6.5(.256) [3.4(.134)]
6.1(.240)
8.2(.323)
5.9(.232)
11.7(.461)
Circuit No.1
7.7(.303)
6.1(.240)
8.2(.323)
5.9(.232)
11.7(.461)
2.0(.079)
A
B
Circuit No.1
7.7(.303)
6.1(.240)
8.2(.323)
5.9(.232)
11.7(.461)
2.0(.079)
A
B
Circuit No.1
6.5(.256) [3.4(.134)]
6.5(.256) [3.4(.134)]
AB
Post: Copper alloy, copper-undercoated, tin/lead-plated
Wafer: Glass-filled PBT, UL94V-0, natural (white)
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
S02B-PASK-2
S03B-PASK-2
S04B-PASK-2
S05B-PASK-2
S06B-PASK-2
S07B-PASK-2
S08B-PASK-2
S09B-PASK-2
S10B-PASK-2
S11B-PASK-2
S12B-PASK-2
S13B-PASK-2
S14B-PASK-2
S15B-PASK-2
S16B-PASK-2
1,000
1,000
500
500
500
250
250
250
250
250
250
250
200
200
200
2.0( .079)
4.0( .157)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
30.0(1.181)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
30.0(1.181)
32.0(1.260)
34.0(1.339)
Circuits Model No.
Dimensions mm(in.)
Material and Finish
Q'ty /
box
(2 to 9circuits)
(10 to 15 circuits)
(16 circuits)
Side entry type
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. S03B-PASK-2-
S…natural (white)
K…black R…red E…blue M…green O…orange N…brown
P…purple PK…pink Y…yellow L…lemon yellow LE…light blue
H…gray TR…tomato red
66
PA FAMILY SERIES /PA CONNECTOR (Crimp style Standard type)
SMT type shrouded header –––––––––––––––––––––––––––––––––––––––––––––––––
Q'ty /
reel
Circuits
Material and Finish
Post: Brass, copper-undercoated, tin-plated
Wafer: Polyamide resin, UL94V-0, natural (ivory)
Solder tab: Brass, copper-undercoated, tin-plated
Without a boss
Model No. Dimensions mm(in.)
2
3
4
5
6
7
8
9
10
11
12
SM02B-PASS-(*)
SM03B-PASS-(*)
SM04B-PASS-(*)
SM05B-PASS-(*)
SM06B-PASS-(*)
SM07B-PASS-(*)
SM08B-PASS-(*)
SM09B-PASS-(*)
SM10B-PASS-(*)
SM11B-PASS-(*)
SM12B-PASS-(*)
With a boss
SM02B-PASS-1
-(*)
SM03B-PASS-1
-(*)
SM04B-PASS-1
-(*)
SM05B-PASS-1
-(*)
SM06B-PASS-1
-(*)
SM07B-PASS-1
-(*)
SM08B-PASS-1
-(*)
SM09B-PASS-1
-(*)
SM10B-PASS-1
-(*)
SM11B-PASS-1
-(*)
SM12B-PASS-1
-(*)
A
2.0(.079)
4.0(.157)
6.0(.236)
8.0(.315)
10.0(.394)
12.0(.472)
14.0(.551)
16.0(.630)
18.0(.709)
20.0(.787)
22.0(.866)
B
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Q'ty /
reel
Circuits
Top entry type Side entry type
Material and Finish
Post: Brass, copper-undercoated, tin-plated
Wafer: Polyamide resin, UL94V-0, natural (ivory)
Solder tab: Brass, copper-undercoated, tin-plated
Without a boss
Model No. Dimensions mm(in.)
2
3
4
5
6
7
8
9
10
11
12
13
BM02B-PASS-(*)
BM03B-PASS-(*)
BM04B-PASS-(*)
BM05B-PASS-(*)
BM06B-PASS-(*)
BM07B-PASS-(*)
BM08B-PASS-(*)
BM09B-PASS-(*)
BM10B-PASS-(*)
BM11B-PASS-(*)
BM12B-PASS-(*)
BM13B-PASS-(*)
With a boss
BM02B-PASS-1
-(*)
BM03B-PASS-1
-(*)
BM04B-PASS-1
-(*)
BM05B-PASS-1
-(*)
BM06B-PASS-1
-(*)
BM07B-PASS-1
-(*)
BM08B-PASS-1
-(*)
BM09B-PASS-1
-(*)
BM10B-PASS-1
-(*)
BM11B-PASS-1
-(*)
BM12B-PASS-1
-(*)
BM13B-PASS-1
-(*)
A
2.0(.079)
4.0(.157)
6.0(.236)
8.0(.315)
10.0(.394)
12.0(.472)
14.0(.551)
16.0(.630)
18.0(.709)
20.0(.787)
22.0(.866)
24.0(.945)
B
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
30.0(1.181)
500
500
500
500
500
500
500
500
500
500
500
500
(2 to 3circuits)
(4 to 9circuits)
(10 to 13 circuits)
Top entry type (2 to 3circuits)
(4 to 9circuits)
(10 to 12 circuits)
Side entry type
A
B
Circuit No.1
Circuit No.1
Circuit No.1
2.0(.079)
A
B
A
B
2.0
(.079)
5.7(.224)
1.8
(.071)
7.1(.280)
5.7(.224)
1.8
(.071)
7.1(.280)
5.7(.224)
1.8
(.071)
7.1(.280)
2.0(.079)
A
B
Circuit No.1
5.7(.224)
1.8
(.071)
1.8
(.071)
7.1(.280)
2.0
(.079)
A
B
Circuit No.1
A
B
Circuit No.1
5.7(.224)
1.8
(.071)
7.1(.280)
5.7(.224)
7.1(.280)
2.0(.079)
2.0(.079)
Note:
1. (*): TF…taping product
TFT…taping product with suction tape.
2. BM13B-PASS-(*) and BM13B-PASS-1-(*) are not UL/CSA approved.
Note:
(*): TB…taping product
TBT…taping product with suction tape.
67
PA FAMILY SERIES /PA CONNECTOR (Crimp style Standard type)
Taping specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––
Feeding direction
Feeding direction
Feeding direction
Feeding direction
Feeding direction
Cover tape Carrier tape
Cover tape Carrier tape
4.0±0.1
(.157±.004)
4.0±0.1
(.157±.004)
2.9±0.1
(.114±.004)
12.0±0.1
(.472±.004)
16.0±0.1
(.630±.004)
16.0±0.1
(.630±.004)
12.0±0.1
(.472±.004)
1.55±0.05
(.061±.002)dia.
1.55±0.05
(.061±.002)dia.
1.75±0.1
(.069±.004)
1.75±0.1
(.069±.004)
F±0.1(.004)
W±0.3(.012)
S±0.1(.004) F±0.1(.004)
W±0.3(.012)
2.0±0.1
(.079±.004)
4.0±0.1
(.157±.004)
1.55±0.05
(.061±.002)dia.
2.0±0.1
(.079±.004)
Cover tape Carrier tape
Cover tape Carrier tape
1.75±0.1
(.069±.004)
1.75±0.1
(.069±.004)
F±0.1(.004)
W±0.3(.012)
4.0±0.1
(.157±.004)
2.9±0.1
(.114±.004)
1.55±0.05
(.061±.002)dia.
S±0.1(.004) F±0.1(.004)
W±0.3(.012)
[13(.512)dia.]
2.0±0.5(.079±.020)
380±2.0(14.961±.079)dia.
Feeding direction
Cover tape leaderCarrier tape
The end part
160(6.299)min.
Connector
mounting part 400(15.748)min.
Leader part
100(3.937)min.
(+.098
-.039
W1+2.5
-1.0 )
Top entry type
Side entry type
Circuits FTaping dimensions mm(in.)
Reel dimensions mm(in.)
2 to 5
6, 7
8 to 13
SW1
11.5(.453)
14.2(.559)
20.2(.795)
–
28.4(1.118)
40.4(1.591)
W
24.0( .945)
32.0(1.260)
44.0(1.732)
25.5(1.004)
33.5(1.319)
45.5(1.791)
500
500
500
1,000
1,000
1,000
Q'ty / reel
Note:
1. Specifications conform to JIS C 0806. The tape width, connector loading
recess square hole dimensions, etc. are determined by the number of circuits
and external shape of the connector to be loaded.
2. Specifications are subject to change without prior notice.
(2 to 5circuits)
Top entry type
(2 to 5circuits)
(6 to 13 circuits)
(6 to 12 circuits)
Side entry type
68
PA FAMILY SERIES /PA CONNECTOR (Crimp style Standard type)
Q'ty /
box
Circuits
Material and Finish
Post: Copper alloy, copper-undercoated, tin/lead-plated
Wafer: Glass-filled PBT, UL94V-0, natural (white)
Without a boss
Model No. Dimensions mm(in.)
2
3
4
5
6
7
8
9
10
11
12
15
BH02B-PASK
BH03B-PASK
BH04B-PASK
BH05B-PASK
BH06B-PASK
BH07B-PASK
BH08B-PASK
BH09B-PASK
BH10B-PASK
BH11B-PASK
BH12B-PASK
BH15B-PASK
With a boss
BH02B-PASK-1
BH03B-PASK-1
BH04B-PASK-1
BH05B-PASK-1
BH06B-PASK-1
BH07B-PASK-1
BH08B-PASK-1
BH09B-PASK-1
BH10B-PASK-1
BH11B-PASK-1
BH12B-PASK-1
BH15B-PASK-1
A
2.0( .079)
4.0( .157)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
28.0(1.102)
B
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
32.0(1.260)
900
675
550
450
375
325
300
275
250
225
200
150
Shrouded header <High box type> –––––––––––––––––––––––––––––––––––––––––––
(3 circuits)
(4 circuits)
(7 to 9 circuits)
(10 to 12, 15 circuits)
(2 circuits) (5, 6 circuits)
A
B
A
B
Circuit No.1
Circuit No.1
A
B
Circuit No.1
5.3(.209)
13.9(.547)
3.0
(.118)
7.1(.280)
5.3(.209)
13.9(.547)
3.0
(.118)
7.1(.280)
5.3(.209)
13.9(.547)
3.0
(.118)
7.1(.280)
2.0
(.079)
2.0
(.079)
A
B
Circuit No.1
A
B
Circuit No.1
A
B
Circuit No.1
5.3(.209)
13.9(.547)
3.0
(.118)
7.1(.280)
5.3(.209)
13.9(.547)
3.0
(.118)
7.1(.280)
5.3(.209)
13.9(.547)
3.0
(.118)
7.1(.280)
2.0
(.079)
2.0
(.079)
2.0
(.079)
69
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1.5
(.059)
2.2
(.087)
8.4(.331)
2.85(.112)
1.3
(.051)
Model No. Applicable wire
Insulation O.D. mm(in.)
Material and Finish
Q'ty /
reel
Phosphor bronze, tin-plated
SPA
-
001T
-
P0.5 0.13 to 0.33 26 to 22
0.9 to 1.5(.035 to .059)
10,000
mm2AWG #
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
A
B7.2(.283)
11.4(.449)
Circuit No.1
11.4(.449)
A
B
2.0(.079)
Circuit No.1
7.2(.283)
A
B7.2(.283)
11.4(.449)
Circuit No.1
A
B
2.0(.079) 2.0(.079)
7.2(.283)
11.4(.449)
Circuit No.1
A
B
2.0(.079)
7.2(.283)
11.4(.449)
Circuit No.1
B
11.4(.449)
A
2.0(.079)
Circuit No.1
7.2(.283)
Q'ty /
bag
Circuits Model No.
Material
Nylon 66, UL94V-0, natural (white)
AB
Dimensions mm(in.)
2
3
4
5
6
7
8
9
10
15
PARP-02V
PARP-03V
PARP-04V
PARP-05V
PARP-06V
PARP-07V
PARP-08V
PARP-09V
PARP-10V
PARP-15V
2.0( .079)
4.0( .157)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
28.0(1.102)
5.4( .213)
7.4( .291)
9.4( .370)
11.4( .449)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
32.0(1.260)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
500
(2 circuits)
(4 circuits)
(3 circuits)
(5 circuits)
(6 to 9 circuits) (10, 15 circuits)
Note: PARP-15V is not CSA approved.
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. PARP-02V-oo-
(blank)…natural (white)
R…red E…blue Y…yellow M…green
70
Retainer –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
2.85
(.112)
2.0(.079)
2.4
(.094) B
A
7.0(.276)
3.1
(.122)
2.0(.079)
A
B
7.0(.276)
2.4(.094)
1.5(.059)
1.5(.059)
Q'ty /
bag
Circuits Model No.
Material
Glass-filled nylon 66, UL94V-0, natural (ivory)
AB
Dimensions mm(in.)
2
3
4
5
6
7
8
9
10
15
PMS-02V-S
PMS-03V-S
PMS-04V-S
PMS-05V-S
PMS-06V-S
PMS-07V-S
PMS-08V-S
PMS-09V-S
PMS-10V-S
PMS-15V-S
2.0( .079)
4.0( .157)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
28.0(1.102)
7.3( .287)
9.3( .366)
11.3( .445)
13.3( .524)
11.55( .455)
13.55( .533)
15.55( .612)
17.55( .691)
19.55( .770)
29.55(1.163)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
(2 to 5 circuits) (6 to 15 circuits)
PA FAMILY SERIES /PA CONNECTOR (Crimp style Retainer mountable type)
Note: PMS-09V-S, PMS-10V-S and PMS-15V-S are not CSA approved.
71
Receptacle ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
2.0(.079)
8.0(.315)
13.0(.512)
A
B
3.1(.122)
5.1(.201)
Circuit No.1
2.0(.079)
Circuits Model No.
Material and Finish
AB
Dimensions mm(in.)
2
3
4
5
6
7
8
9
10
11
12
13
14
15
02PAF
-
6S
03PAF
-
6S
04PAF
-
6S
05PAF
-
6S
06PAF
-
6S
07PAF
-
6S
08PAF
-
6S
09PAF
-
6S
10PAF
-
6S
11PAF
-
6S
12PAF
-
6S
13PAF
-
6S
14PAF
-
6S
15PAF
-
6S
2.0( .079)
4.0( .157)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
30.0(1.181)
32.0(1.260)
1,000
1,000
500
500
500
500
250
250
250
250
250
250
250
250
Contact: Phosphor bronze, tin-plated
Housing:
Nylon 66, UL94V-0, natural (white)
Q'ty /
box
Retainer –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
4.1(.161) 8.9(.350)
2.0
(.079)
A
B
Circuits Model No.
Material
AB
Dimensions mm(in.)
2
3
4
5
6
7
8
9
10
11
12
13
14
15
PAFS-02V-S
PAFS-03V-S
PAFS-04V-S
PAFS-05V-S
PAFS-06V-S
PAFS-07V-S
PAFS-08V-S
PAFS-09V-S
PAFS-10V-S
PAFS-11V-S
PAFS-12V-S
PAFS-13V-S
PAFS-14V-S
PAFS-15V-S
2.0( .079)
4.0( .157)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
7.4( .291)
9.4( .370)
11.4( .449)
13.4( .528)
15.4( .606)
17.4( .685)
19.4( .764)
21.4( .843)
23.4( .921)
25.4(1.000)
27.4(1.079)
29.4(1.157)
31.4(1.236)
33.4(1.315)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Glass-filled nylon 66, UL94V-0, natural (ivory)
Q'ty /
bag
PA FAMILY SERIES /PAF CONNECTOR (Insulation displacement
type
)
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. 02PAF-6S-
S…natural (white)
R…red E…blue M…green Y…yellow
Note: PAFS-09V-S, PAFS-10V-S, PAFS-11V-S, PAFS-12V-S, PAFS-13V-S,
PAFS-14V-S and PAFS-15V-S are not UL/CSA approved.
72
PA FAMILY SERIES /PAL CONNECTOR (Wire-to-wire type)
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
6.3(.248)
A
B
4.7
(.185)
20.0(.787)
Circuit No.1
20.0(.787)
11.2(.441)
6.3(.248)
4.4
(.173)
A
B
2.0(.079)
Circuit No.1
2.0(.079) 3.7(.146) 3.4(.134) 3.7(.146) 3.4(.134)
6.3
(.248) 1.0
(.039)
A
B3.2(.126)
3.25(.128)
4.0(.157)
20.0(.787)
Circuit No.1
6.3(.248)
A
B3.2(.126)
4.4
(.173)
5.15
(.203)
5.8(.228)
20.0(.787)
1.6(.063)
2.0(.079)
Circuit
No.1
5.1±0.05(.201±.002)
C ( )
+0.1
0 +.004
0
D±0.1(.004)
C ( )
+0.1
0 +.004
0
D±0.1(.004)
4.6±0.05(.181±.002)
3.7(.146)
2.0(.079)
3.4
(.134)
6.5 (.256 )
+0.1
0 +.004
0
3.7(.146) 3.4(.134)
6.5 (.256 )
+0.1
0 +.004
0
Q'ty /
bag
Circuits Model No.
Material
AB
Dimensions mm(in.)
2
3
4
5
6
7
8
9
10
15
PARP-02V
PARP-03V
PARP-04V
PARP-05V
PARP-06V
PARP-07V
PARP-08V
PARP-09V
PARP-10V
PARP-15V
2.0( .079)
4.0( .157)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
28.0(1.102)
5.4( .213)
7.4( .291)
9.4( .370)
11.4( .449)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
32.0(1.260)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
500
Q'ty /
bag
Circuits Model No.
Material
Nylon 66, UL94V-0, natural (white)
AB
Dimensions mm(in.)
2
3
4
5
6
7
8
PALR
-
02VF
PALR
-
03VF
PALR
-
04VF
PALR
-
05VF
PALR
-
06VF
PALR
-
07VF
PALR
-
08VF
2.0 (.079)
4.0 (.157)
6.0 (.236)
8.0 (.315)
10.0 (.394)
12.0 (.472)
14.0 (.551)
9.4 (.370)
11.4 (.449)
13.4 (.528)
15.4 (.606)
17.4 (.685)
19.4 (.764)
21.4 (.843)
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Q'ty /
bag
Circuits Model No.
Material
Nylon 66, UL94V-0, natural (white)
CDAB
Dimensions mm(in.)
2
3
4
6
7
8
PALR
-
02V
PALR
-
03V
PALR
-
04V
PALR
-
06V
PALR
-
07V
PALR
-
08V
9.8(.386)
11.8(.465)
13.8(.543)
19.8(.780)
21.8(.858)
23.8(.937)
13.4( .528)
15.4( .606)
17.4( .685)
21.4( .843)
23.4( .921)
25.4(1.000)
1,000
1,000
1,000
1,000
1,000
1,000
2.0(.079)
4.0(.157)
6.0(.236)
10.0(.394)
12.0(.472)
14.0(.551)
9.4(.370)
11.4(.449)
13.4(.528)
17.4(.685)
19.4(.764)
21.4(.843)
Retainer –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Without panel locks
(2 to 5 circuits)
With panel locks
(2 to 4 circuits)
(6 to 8 circuits)
Retainers are interchangeable with those of the PA crimp style retainer mountable type.
(6 to 8 circuits)
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. PALR-02V(F)-oo-
(blank)…natural (white)
R…red E…blue M…green Y…yellow
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1.3(.051)
0.5(.020) 0.5(.020)
1.6(.063)
2.4(.094)
2.85(.112)
12.8(.504)
Model No. Applicable wire
Insulation O.D. mm(in.)
Material and Finish
Q'ty /
reel
Phosphor bronze, tin-plated
SPAL
-
001T
-
P0.5
SPAL
-
002T
-
P0.5 0.13 to 0.33
0.08 to 0.21 26 to 22
28 to 24
1.0 to 1.5(.039 to .059)
0.9 to 1.5(.035 to .059)
10,000
mm2AWG #
73
PA Receptacle + PA Header
(Standard type) PAF Receptacle + PA HeaderPA Receptacle + PA Header
(Retainer mountable type)
PA Receptacle + PA side entry
type header (Standard type) PAF Receptacle +
PA side entry type header
PA Receptacle + PA side entry type
header (Retainer mountable type)
PA FAMILY SERIES /PA•PAF•PAL CONNECTOR
PC board layout (viewed from component side) and Assembly layout––––––––––––––––––
5.8(.228)
9.8(.386)
[5.8(.228)]
[14.9(.587)]
+0.1
0
0.7
(.028 )dia.
+.004
0
+0.1
0
1.0
(.039 )dia.
+.004
0
2.0
±
0.05(.079
±
.002)
A
±
0.05(.002) 1.5
±
0.05(.059
±
.002)
1.7
±
0.05(.067
±
.002)
7.2(.283)
[14.7(.579)](retainer included)
Through-hole type
Top entry type
7.0(.276)
8.2(.323)
13.8(.543)
8.2(.323)
[7.0(.276)]
[18.9(.744)]
8.2(.323)
[8.4(.331)]
[18.8(.740)](retainer included)
+0.1
00.7
(.028 )dia.
+.004
0
+0.1
01.1
(.043 )dia.
+.004
0
A
±
0.05(.002) 1.5
±
0.05
(.059
±
.002)
2.0
±
0.05
(.079
±
.002)
2.1
±
0.05
(.083
±
.002)
Side entry type
PA Receptacle + PA
Header (Standard type) PAF Receptacle + PA HeaderPA Receptacle + PA Header
(Retainer mountable type)
Connector outline
[6.2(.244)] [1.4(.055)]
11.1(.437)
[7.6(.299)] [1.4(.055)]
[16.0(.630)](retainer included)
[6.2(.244)] [1.4(.055)]
[16.2(.638)]
0.4 (.016 )R
+.004
0
+ 0.1
0
1.7±0.1
(.067±.004)
2.2±0.05(.087±.002)
2.0±0.05
(.079±.002) 1.8±0.1(.071±.004)
1.0±0.1
(.039±.004)
1.45±0.1(.057±.004)
5.0±0.1
(.197±.004)
3.6±0.1
(.142±.004)
4.9±0.1
(.193±.004)
1.0(.039)min.
2.9
(.114)min.
A±0.1
(.004) 0.8 (.031 )dia.
+.004
0
+ 0.1
0
SMT type
Top entry type
Note:
1. Tolerances are non-cumulative:
±
0.05mm (
±
.002") for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
Note:
1. Tolerances are non-cumulative:
±
0.05mm (
±
.002") for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method.
The dimensions above should serve as a guideline. Contact JST for details.
74
PA Receptacle + PAL Receptacle
(Standard type) PAF Receptacle + PAL ReceptaclePA Receptacle + PAL Receptacle
(Retainer mountable type)
Assembly layout ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
[25.8(1.016)](retainer included) [26.0(1.024)](retainer included)
[21.5(.846)](retainer included)
[7.6(.299)]
(retainer included)
[8.9(.350)]
(retainer included)
[8.4(.331)]
(retainer included)
PA FAMILY SERIES /PA•PAF•PAL CONNECTOR
PC board layout (viewed from component side) and Assembly layout––––––––––––––––––
PA Receptacle + PA side
entry type header (SMT)
(Standard type)
PAF Receptacle + PA side
entry type header (SMT)
PA Receptacle + PA side entry
type header (SMT)
(Retainer mountable type)
2.8
(.110)
8.9(.350)
11.1(.437)
1.45±0.1(.057±.004)
Connector outline
8.9(.350)
[16.0(.630)](retainer included)
8.9(.350)
[16.2(.638)]
[6.2(.244)]
[6.2(.244)]
[7.6(.299)]
5.7(.224)
5.7(.224)
5.7(.224)
0.4
(.016 )R
+.004
0
+ 0.1
0
1.7±0.1(.067±.004) 2.2±0.05(.087±.002)
2.0±0.05(.079±.002)
3.8±0.1
(.150±.004)
7.95±0.1
(.313±.004)
1.8±0.1(.071±.004)
7.8±0.1(.307±.004)
1.0±0.1
(.039±.004)
1.0(.039)min.
A±0.1(.004)
0.8 (.031 )dia.
+.004
0
+ 0.1
0
[1.1(.043)]
[1.1(.043)] [1.1(.043)]
2.7
(.106)min
SMT type
Side entry type
PA Receptacle +
PA high box type header
(Standard type)
PAF Receptacle +
PA high box type header
PA Receptacle +
PA high box type header
(Retainer mountable type)
7.1(.280)
A
±
0.05(.002)
1.7
±
0.05
(.067
±
.002)
1.5
±
0.05
(.059
±
.002)
2.0±0.05
(.079±.002)
7.2(.283) 7.1(.280)
15.9(.626)
[20.7(.815)](retainer included)
20.9(.823)
+0.1
0
1.1
(.043 )dia.
+.004
0
+0.1
0
0.7
(.028 )dia.
+.004
0
High box type
Note:
1. Tolerances are non-cumulative:
±
0.05mm (
±
.002") for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method.
The dimensions above should serve as a guideline. Contact JST for details.
75
Contact Crimp applicator MKS-L(-10) Compact crimp applicator MKS-LS-10 Strip-crimp applicator MKS-SC-10
with safety cover without safety cover with safety cover without safety cover with safety cover
Applicator for the semi-automatic press AP-K2N –––––––––––––––––––––––––––––––
SPHD-001T-P0.5 APLMK SPHD001-05 APLNC SPHD001-05 APLMKLS SPHD001-05 APLLSNC SPHD001-05 APLSC SPHD001-05
SPHD-002T-P0.5 APLMK SPHD002-05 APLNC SPHD002-05 APLMKLS SPHD002-05 APLLSNC SPHD002-05 APLSC SPHD002-05
SPA-001T-P0.5 APLMK SPA001-05 APLNC SPA001-05 –– –
SPAL-001T-P0.5 APLMK SPAL001-05 APLNC SPAL001-05 –– –
SPAL-002T-P0.5 APLMK SPAL002-05 APLNC SPAL002-05 –– –
PA FAMILY SERIES /PA•PAF•PAL CONNECTOR