PhotoMOS.book Page 79 Thursday, March 26, 2009 2:21 PM GU 1 Form A (AQV21, AQV214H) (Standard type) 6-pin type for switching low-level analog signal TESTING (Reinforced type) GU 1 Form A (AQV21, AQV214H) FEATURES 6.4 .252 8.8 .346 3.9 .154 6.4 .252 8.8 .346 3.6 .142 mm inch 1 6 2 5 3 4 Compliance with RoHS Directive 1. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 2. Controls various types of loads such as relays, motors, lamps and solenoids 3. Optical coupling for extremely high isolation Unlike mechanical relays, the PhotoMOS relay combines LED and optoelectronic device to transfer signals using light for extremely high isolation. 4. Eliminates the need for a counter electromotive force protection diode in the drive circuits on the input side 5. Stable on-resistance 6. Low-level off state leakage current of max. 1 A 7. Reinforced insulation type of I/O voltage 5,000V also available TYPICAL APPLICATIONS * High-speed inspection machines * Telephone equipment * Data communication equipment * Computers TYPES Part No. Output rating* I/O isolation AC/DC dual use Package Load voltage Load current Standard 1,500 V AC Reinforced 5,000 V Through hole terminal Packing quantity Surface-mount terminal Tape and reel packing style Tube packing style Picked from the 1/2/3-pin side Picked from the 4/5/6-pin side 60V 550 mA AQV212 AQV212A AQV212AX AQV212AZ 100 V 200 V 350 V 400 V 600 V 320 mA 180 mA 130 mA 120 mA 50 mA AQV215 AQV217 AQV210 AQV214 AQV216 AQV215A AQV217A AQV210A AQV214A AQV216A AQV215AX AQV217AX AQV210AX AQV214AX AQV216AX AQV215AZ AQV217AZ AQV210AZ AQV214AZ AQV216AZ 400 V 120 mA AQV214H AQV214HA AQV214HAX AQV214HAZ DIP6-pin Tube Tape and reel 1 tube contains 50 pcs. 1 batch contains 500 pcs. 1,000 pcs. *Indicate the peak AC and DC values. Note: The surface mount terminal shape indicator "A" and the packing style indicator "X" or "Z" are not marked on the relay. RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Output Input Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Continuous load current Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature limits Operating Storage Type of SymRemarks connec- AQV212(A) AQV215(A) AQV217(A) AQV210(A) AQV214(A) AQV216(A) AQV214H(A) bol tion IF 50 mA VR 5V IFP 1A f = 100 Hz, Duty factor = 0.1% Pin 75 mW VL 60 V 100 V 200 V 350 V 400 V 600 V 400 V A 0.55 A 0.32 A 0.18 A 0.13 A 0.12 A 0.05 A 0.12 A A connection: Peak AC, DC IL B 0.65 A 0.42 A 0.22 A 0.15 A 0.13 A 0.06 A 0.13 A B, C connection: DC C 0.80 A 0.60 A 0.30 A 0.17 A 0.15 A 0.08 A 0.15 A A connection: 100 ms (1 shot), 1.2 A 0.96 A 0.54 A 0.4 A 0.3 A 0.15 A 0.3 A Ipeak VL=DC Pout 500 mW PT 550 mW Viso 1,500 V AC 5,000 V AC -40C to +85C -40F to +185F Non-condensing at low temp. Topr Tstg -40C to +100C -40F to +212F All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. PhotoMOS.book Page 80 Thursday, March 26, 2009 2:21 PM GU 1 Form A (AQV21, AQV214H) 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Input LED operate current LED turn off current LED dropout voltage Output On resistance Output capacitance Transfer characteristics Off state leakage current Turn on time* Turn off time* I/O capacitance Initial I/O isolation resistance Type of SymCondition connec- AQV212(A) AQV215(A) AQV217(A) AQV210(A) AQV214(A) AQV216(A) AQV214H(A) bol tion** Typical 1 mA 1 mA 1 mA 1 mA 1 mA 1 mA 1.3 mA IFon -- IL = Max. Maximum 3 mA 3 mA 3 mA 3 mA 3 mA 3 mA 3 mA Minimum 0.4 mA 0.4 mA 0.4 mA 0.4 mA 0.4 mA 0.4 mA 1.2 mA IFoff -- IL = Max. Typical 0.79 mA 0.79 mA 0.79 mA 0.79 mA 0.79 mA 0.79 mA 0.79 mA Typical 1.25 V (1.14 V at IF = 5 mA) VF -- IF = 50 mA Maximum 1.5 V IF = 5 mA Typical 0.83 2.3 11.0 23 30 70 30 Ron A IL = Max. Maximum 2.5 4.0 15.0 35 50 120 50 Within 1 s on time IF = 5 mA 0.44 1.15 5.5 11.5 22.5 55 22.5 Typical B IL = Max. Ron Maximum 1.25 2.0 7.5 17.5 25 100 25 Within 1 s on time IF = 5 mA 0.25 0.6 2.8 6.0 11.3 28 11.3 Typical C IL = Max. Ron Maximum 0.63 1.0 3.8 8.8 12.5 50 12.5 Within 1 s on time IF = 0 mA A 150 pF 110 pF 70 pF 45 pF 45 pF 45 pF 45 pF VB = 0 V Typical Cout f = 1 MHz IF = 0 mA Maximum ILeak -- 1 A VL = Max. Typical 0.65 ms 0.6 ms 0.25 ms 0.25 ms 0.21 ms 0.28 ms 0.6 ms IF= 5 mA** Ton -- lL=Max. Maximum 2 ms 2 ms 1.0 ms 0.5 ms 0.5 ms 0.5 ms 0.8 ms Typical Maximum Typical Maximum Minimum Toff -- Ciso -- Riso -- 0.08 ms 0.06 ms 0.05 ms 0.05 ms 0.05 ms 0.04 ms 0.05 ms 0.2 ms 0.2 ms 0.2 ms 0.2 ms 0.8 pF 0.2 ms 0.2 ms 0.2 ms IF = 5 mA IL = Max. 1.5 pF f = 1 MHz VB = 0 V 1,000 M 500 V DC *Turn on/Turn off time Input 90% Output 10% Ton Toff RECOMMENDED OPERATING CONDITIONS Please obey the following conditions to ensure proper relay operation and resetting. Item Symbol Input LED current IF Recommended value Standard type: 5 Reinforced type: 5 to 10 Unit mA For Dimensions For Schematic and Wiring Diagrams For Cautions for Use These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Electric Works technical representative. For more information All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. PhotoMOS.book Page 81 Thursday, March 26, 2009 2:21 PM GU 1 Form A (AQV21, AQV214H) REFERENCE DATA 1-(1). Load current vs. ambient temperature characteristics 1-(2). Load current vs. ambient temperature characteristics 2-(1). On resistance vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Type of connection: A Allowable ambient temperature: -40C to +85C -40F to +185F Type of connection: A Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC) Continuous load current: Max. (DC) 140 0.7 120 AQV212 4 0.4 AQV215 0.3 0.2 100 On resistance, 0.5 Load current, mA Load current, A 0.6 5 AQV210 AQV214(H) 80 60 AQV216 AQV215 3 2 40 AQV217 AQV212 1 20 0.1 0 -40 -20 0 -40 -20 8085 100 0 20 40 60 Ambient temperature, C 0 0 20 40 60 8085 100 Ambient temperature, C -40 -20 0 20 40 60 8085 Ambient temperature, C 2-(2). On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics 4. Turn off time vs. ambient temperature characteristics Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC) Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 120 100 80 60 AQV214(H) 40 AQV210 1.5 AQV212,AQV215 1.0 AQV214H AQV216,AQV210,AQV217 Turn off time, ms AQV216 Turn on time, ms On resistance, 0.4 2.0 0.3 0.2 AQV214H AQV212,215 0.1 0.5 AQV216,210,217 20 AQV214 0 -40 -20 AQV217 0 20 40 60 8085 Ambient temperature, C AQV214 0 -40 -20 0 0 20 40 60 8085 Ambient temperature, C -40 -20 0 20 40 60 Ambient temperature, C 5-(1). LED operate current vs.ambient temperature characteristics 5-(2). LED operate current vs.ambient temperature characteristics 6-(1). LED turn off current vs. ambient temperature characteristics Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) AQV212 AQV215 AQV217 AQV210 3 2 AQV214 AQV216 1 -40 -20 0 20 40 60 8085 Ambient temperature, C 4 3 AQV214H 2 4 3 2 1 1 0 LED turn off current, mA 4 0 5 5 LED operate on current, mA LED operate on current, mA 5 8085 -40 -20 0 20 40 60 8085 Ambient temperature, C 0 -40 -20 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 0 20 40 60 8085 Ambient temperature, C PhotoMOS.book Page 82 Thursday, March 26, 2009 2:21 PM GU 1 Form A (AQV21, AQV214H) 6-(2). LED turn off current vs. ambient temperature characteristics 7. LED dropout voltage vs. ambient temperature characteristics 8-(1). Current vs. voltage characteristics of output at MOS portion Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: All types LED current: 5 to 50 mA Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F 0.5 4 3 AQV214H 2 Current, A 1.5 LED dropout voltage, V LED turn off current, mA 5 1.4 1.3 -20 1.1 -0.2 -0.3 -0.4 0 0 20 40 60 8085 Ambient temperature, C 0.2 0.2 0.4 0.6 0.8 1.0 -0.1 Voltage, V 50mA 30mA 20mA 10mA 5mA 1.0 -40 AQV215 0.3 0.1 -1.0 -0.8 -0.6 -0.4 -0.2 1.2 1 0 AQV212 0.4 -40 -20 -0.5 0 20 40 60 8085 Ambient temperature, C 8-(2). Current vs. voltage characteristics of output at MOS portion 9. Off state leakage current vs. load voltage characteristics 10-(1). Turn on time vs. LED forward current characteristics Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F 1.2 AQV217 AQV210 AQV214(H) 120 80 AQV216 40 -5 -4 -3 -2 -1 1 -40 2 3 4 Voltage, V 5 -80 -3 10 1.0 Turn on time, ms 160 Off state leakage current, A Current, mA 200 10-6 -9 10 AQV214(H) -160 AQV212,AQV215 0.6 AQV210,AQV216,AQV217 0.4 AQV216 -120 0.8 0.2 AQV214 -12 10 -200 0 20 40 80 60 Load voltage, V 0 100 10 20 30 40 50 LED forward current, mA 60 10-(2). Turn on time vs. LED forward current characteristics 11. Turn off time vs. LED forward current characteristics 12. Output capacitance vs. applied voltage characteristics Measured portion: between terminals 4 and 6; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC); Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25C 77F 2.5 Turn off time, ms 1.5 1.0 AQV212 0.08 AQV215 0.06 AQV214H AQV216 0.04 AQV210,214,217 0.5 150 100 AQV214(H),AQV216,AQV210 AQV217 50 0.02 AQV214H 0 Output capacitance, pF 0.10 2.0 Turn on time, ms 200 0.12 10 20 30 40 50 LED forward current, mA 0 60 AQV215 10 20 30 40 50 LED forward current, mA 0 0 10 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. AQV212 20 30 40 Applied voltage,V 50