SMT POWER INDUCTORS Power Beads - Volta 1 & 2 Series Height: 3.2mm and 4.5mm Max Footprint: 7.0 x 6.4mm Max and 8.9 x 6.4mm Max Current Rating: up to 16A Inductance Range: 0.1H to 0.6H Frequency Range: up to 2MHz Electrical Specifications @ 25C -- Operating Temperature -40C to +130C Inductance @Irated (nH 20%) 5, 6 Part Number Irated (ADC) DCR (m) 1 Saturation Current 2 (ADC) 25C 100C Inductance @0ADC (nH 20%) TYP MAX VOLTA 1 P1681 95 15 0.31 0.39 100 PA0274 475* 6.0 1.60 1.8* 700 VOLTA 2 PA0229 92 16 0.68 0.80 100 P2005 142.5 15 0.45 0.56 150 P2004 190 15 0.45 0.56 200 PA0277 600* 10.7 2.3 2.53* 700 * DCR and Inductance rating for indicated parts is for both windings tied in series. Heating3 Current (A) Trise4 Factor K0 P1681 Date Code Country of Origin 15 12 1.0032 1.4000 .00319 .00638 .07381 .24632 36 18 16.8 12.6 30 16.2 15.1 8.0 16 15 15 10.7 2.2458 2.2458 2.2458 2.0400 .00638 .00638 .00638 .01276 .03975 .05961 .07949 .13196 Schematic .350 MAX 8,89 .255 6,48 MAX .130 3,30 Date Code Country of Origin 2 .100 2,54 2X.065 1,65 1 2 .177 MAX 4,50 SUGGESTED PAD LAYOUT .075 1,91 .350 MAX 8,89 4 .255 MAX 3 6,48 PA0274 .350 8,89 2X.079 2,01 SUGGESTED PAD LAYOUT .085 2,16 Date Code Country of Origin .135 3,43 .010 0,25 .280 7,11 .276 MAX 7,01 1 2 PA0277 Date Code Country of Origin 4 .296 7,52 .085 2X 2,16 .130 MAX 3,30 .010 0,25 .150 3,81 4X .065 1,65 2X 2X 2X .177 MAX 4,50 .031 1,79 .020 0,51 1 4X .079 2,01 .012 0,30 .157 4,00 .079 2,00 .295 7,49 .630 .012 16,00 0,30 .285 7,24 TAPE & REEL LAYOUT .069 1,75 .270 6,86 .472 12,00 USER DIRECTION OF FEED .060 1,52 2X 4 .099 2,51 2 2X 2X .040 1,02 .015 0,38 3 PA0274 PA0277 SUGGESTED PAD LAYOUT SUGGESTED PAD LAYOUT .130 3,30 .360 9,14 .040 2X 1,02 .135 3,43 .010 0,25 Volta 1 Volta 2 Weight.........0.464 grams ....0.945 grams Tape & Reel .....1500/reel .........1000/reel .250 MAX 6,35 3 .045 2X 1,14 .065 2X 1,65 P1681 P2004 P2005 PA0229 .150 3,81 .150 3,81 .010 0,25 1 .250 6,35 MAX .110 2,80 P2004/P2005 PA0229 .125 MAX 3,18 K2 16.2 4.8 Volta 2 .276 MAX 7,01 K1 18 7 Mechanicals Volta 1 Core Loss Factor4 .180 4,57 .012 0,30 .157 4,00 .079 2,00 .295 7,49 .630 .012 16,00 0,30 .340 8,64 TAPE & REEL LAYOUT .069 1,75 .265 6,73 .472 12,00 Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 USER DIRECTION OF FEED US 858 674 8100 * UK 44 1483 401 700 * France 33 3 84 35 04 04 * Singapore 65 6287 8998 * Taiwan 886 2 2698 0228 * Hong Kong 852 2788 6588 * http://www.pulseeng.com P522.B (5/05) SMT POWER INDUCTORS Power Beads - Volta 1 & 2 Series Notes from Tables 1. The rated current as listed is either the saturation current or the heating current depending on which value is lower. 2. The saturation current is the current which causes the inductance to drop by 10% at the stated ambient temperatures (-40C, 25C, 125C). This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 3. The heating current is the DC current which causes the temperature of the part to increase by approximately 30C. This current is determined by mounting the component on a PCB with .25" wide, 3 oz. equivalent copper traces, and applying the current to the device for 30 minutes. 4. In high volt*time applications, additional heating in the component can occur due to core losses in the inductor which may neccessitate derating the current in order to limit the temperature rise of the component. In order to determine the approximate total losses (or temperature rise) for a given application both copper losses and core losses should be taken into account. 5. Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part number, (i.e. PA0274T). 6. To order RoHS compliant part, add the suffix "NL" to the part number (i.e. PA0274 becomes PA0274NL and PA0274T becomes PA0274NLT). Estimated Temperature Rise: .833 Trise = Coreloss (mW) + Copper Loss (mW) (C) K0 Coreloss = K1 * ( Fsw(kHz)) 1.6688 * (K2 * dI)2.17 (mW) Copper Loss = Irms2 * DCR(m) (mW) 1/2 IDC 2 + dI 2 (Arms) 12 Fsw(kHz) = switching frequency (kHz) Irms = dI = delta I across the component (A) The temperature of the component (ambient temperature + temperature rise) should be within the listed operating temperature range. Inductance vs Current Characteristics P1681, P2005, P2004 PA0229 Inductance vs. DC Current at 25C P3 Percent of Initial Inductance (%) 120 Percentage of Initial Inductance P2 P1 120 100 100 80 60 40 20 0 0 0.2 0.4 0.6 0.8 1.0 Normalized IDC 1.2 1.4 1.6 80 60 40 20 0 1.8 0 5 10 15 P1 - Initial Inductance, Lo (.1VRMS, 1MHz, 0ADC, 25C) P2 - Inductance (typically 95% LO) at Rated IDC. Normalized Inductance P3 - Inductance (typically 90% LO) at IPK. 25 120 100 80 60 40 20 0 2 4 6 8 10 12 Percent of Initial Inductance (%) Percent of Initial Inductance (%) PA0274 Inductance vs. DC Current at 25C 0 20 25 30 35 40 45 Current (ADC) 100 PA0277 Inductance vs. DC Current at 25C 120 100 80 60 40 20 0 0 2.5 5 Current (ADC) 7.5 10 12.5 15 17.5 20 Current (ADC) For More Information: UNITED STATES (Worldwide) UNITED KINGDOM (Northern Europe) FRANCE (Southern Europe) SINGAPORE (Southern Asia) TAIWAN, R.O.C. (Northern Asia) HONG KONG (China/Hong Kong) 12220 World Trade Drive San Diego, CA 92128 U.S.A. http://www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 3 Huxley Road Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701 Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 TEL: 65 6287 8998 FAX: 65 6280 0080 3F-4, No. 81, Sec. 1 HsinTai Wu Road Hsi-Chih, Taipei Hsien Taiwan, R.O.C. Tel: 886 2 2698 0228 FAX: 886 2 2698 0948 Unit 11, 11/F Wah Lai Industrial Centre 10-14 Kwei Tei Street, Fotan, Shatin, Hong Kong TEL: 852 2788 6588 FAX: 852 2776 1055 DISTRIBUTOR Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c)2005, Pulse Engineering, Inc. All rights reserved. P522.B (5/05)