FB2100M
SURFACE MOUNT
SCHOTTKY BARRIER RECTIFIER
REVERSE VOLTAGE
– 100 Volts
FORWARD CURRENT – 2.0 Ampere
Mite Flat
FEATURES
Case Material: “Green” molding compound, UL
flammability classification 94V-0, (No Br. Sb. Cl.)
Very low profile package – 0.80mm
Super fast switching for high efficiency
For surface mounted applications
Very Low forward voltage drop and high current capability
Low reverse leakage current
MECHANICAL DATA
Case: JEDEC DO-222AA
Moisture Sensitivity: Level 1 per J-STD-020C
Terminals: Lead Free Plating (Matte Tin Finish.)
Component in accordance to RoHs 2002/95/EC
DO-222AA
DIM.
MIN.
MAX.
A 0.80
0.95
b 0.40
0.65
b2 0.70
1.00
C 0.10
0.25
D 1.75
2.05
E 3.60
3.90
E1 2.80
3.10
h 0.35
0.50
L 0.50
0.80
L1 2.10
2.60
L2 0.45
0.75
L3 0.20
0.50
All dimension in millimeter
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25
°C
ambient temperature unless otherwise specified.
PARAMETER SYMBOL
FB2100M UNIT
Device marking code Note B2B ---
Maximum Repetitive Peak Reverse Voltage V
RRM
100 V
Maximum RMS Voltage V
RMS
70 V
Maximum DC Blocking Voltage V
DC
70 V
Average Rectified Output Current @T
L
=140°C, (Fig.1)
I
(AV)
2.0 A
Peak Forward Surge Current 8.3ms single half sine-wave
I
FSM
50 A
Forward Voltage (1) IF=2.0A @Tj=25°C
@Tj=125°C V
F
0.8
0.66
V
Leakage Current (1) V
DC
=Rated @Tj=25°C
@Tj=125°C I
R
1
500 uA
Typical junction capacitance (2) C
J
60 pF
Operating junction temperature T
J
-55 to +175 °C
Storage temperature range T
STG
-55 to +150 °C
THERMAL CHARACTERISTIC SYMBOL
Typical UNIT
Typical thermal resistance_Junction to Case (3) R
Θ
JC
32 °C/W
Typical thermal resistance_Junction to Ambient(3) R
Θ
JA
110 °C/W
Typical thermal resistance_Junction to Lead (3) R
Θ
JL
27
°C/W
Note :
REV. 0 , Nov-2010, KSHP10
(1) 300us Pulse width, 2% Duty cycle.
(2) Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
(3) Thermal Resistance test performed in accordance with JESD-51. Unit mounted on glass-epoxy
substrate with 1oz/ft
2
_7x5 mm copper pad.
RATING AND CHARACTERISTIC CURVES
FB2100M
FIG.1- FORWARD CURRENT DERATING CURVE
0
0.5
1
1.5
2
2.5
0 25 50 75 100 125 150 175
LEAD TEMAERATURE, ( C)
AVERAGE FORWARD CURRENT, (A)
FIG.2- MAXIMUM NON-REPETITIVE SURGE
CURRENT
0
5
10
15
20
25
30
35
40
45
50
1 10 100
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE CURRENT,
(A)
FIG.3 - TYPICAL FORWORD CHARACTERISTICS
0.1
1
10
100
0.2 0.4 0.6 0.8 1 1.2
INSTANTANEOUS FORWARD VOLTAGE, (V)
INSTANTANEOUS FORWARD CURRENT, (A)
FIG.4- TYPICAL JUNCTION CAPACITANCE
10
100
1000
1 10 100
REVERSE VOLTAGE, (V)
CAPACI TANCE, (pF)
FIG.5- TYPICAL REVERSE CHARACTERISTICS
0.000001
0.00001
0.0001
0.001
0.01
0.1
1
0 20 40 60 80 100 120
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
INSTANTANEOUS REVERSE CURRENT, (mA)
Tj=125°C
Tj=25°C
RESISTIVE OR
INDUCTIVE LOAD
Mounted on glass-epoxy
substrate with 1oz/ft
2
_5x7mm
copper pad.
Tj=25°C
Tj=
50
°
C
Tj=150°C
Tj=75°C
Tj=100°C
Tj=125°C
Tj=150°C
Legal Disclaimer Notice
1N5406G-F
Important Notice and Disclaimer
LSC reserves the right to make changes to this document and its products and
specifications at any time without notice. Customers should obtain and confirm the latest
product information and specifications before final design, purchase or use.
LSC makes no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does LSC assume any liability for application
assistance or customer product design. LSC does not warrant or accept any liability with
products which are purchased or used for any unintended or unauthorized application.
No license is granted by implication or otherwise under any intellectual property rights of
LSC.
LSC products are not authorized for use as critical components in life support devices or
systems without express written approval of LSC.