FB2100M SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER REVERSE VOLTAGE - 100 Volts FORWARD CURRENT - 2.0 Ampere FEATURES * Case Material: "Green" molding compound, UL flammability classification 94V-0, (No Br. Sb. Cl.) Mite Flat DIM. A b b2 C D E E1 h L L1 L2 L3 * Very low profile package - 0.80mm * Super fast switching for high efficiency * For surface mounted applications * Very Low forward voltage drop and high current capability * Low reverse leakage current MECHANICAL DATA * Case: JEDEC DO-222AA * Moisture Sensitivity: Level 1 per J-STD-020C * Terminals: Lead Free Plating (Matte Tin Finish.) * Component in accordance to RoHs 2002/95/EC DO-222AA MIN. MAX. 0.80 0.95 0.40 0.65 0.70 1.00 0.10 0.25 1.75 2.05 3.60 3.90 2.80 3.10 0.35 0.50 0.50 0.80 2.10 2.60 0.45 0.75 0.20 0.50 All dimension in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. PARAMETER SYMBOL FB2100M UNIT Device marking code Note B2B --- Maximum Repetitive Peak Reverse Voltage VRRM 100 V Maximum RMS Voltage VRMS 70 V VDC 70 V I(AV) 2.0 A IFSM 50 A Maximum DC Blocking Voltage Average Rectified Output Current @TL=140C, (Fig.1) Peak Forward Surge Current 8.3ms single half sine-wave Forward Voltage (1) IF=2.0A @Tj=25C @Tj=125C VF 0.8 0.66 V Leakage Current (1) VDC=Rated @Tj=25C @Tj=125C IR 1 500 uA Typical junction capacitance (2) CJ 60 pF Operating junction temperature TJ -55 to +175 C TSTG -55 to +150 C SYMBOL Typical UNIT Typical thermal resistance_Junction to Case (3) RJC 32 C/W Typical thermal resistance_Junction to Ambient(3) RJA 110 C/W Typical thermal resistance_Junction to Lead (3) RJL 27 C/W Storage temperature range THERMAL CHARACTERISTIC Note : (1) (2) (3) 300us Pulse width, 2% Duty cycle. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Thermal Resistance test performed in accordance with JESD-51. Unit mounted on glass-epoxy substrate with 1oz/ft2_7x5 mm copper pad. REV. 0 , Nov-2010, KSHP10 RATING AND CHARACTERISTIC CURVES FB2100M FIG.1- FORWARD CURRENT DERATING CURVE FIG.2- MAXIMUM NON-REPETITIVE SURGE CURRENT 50 45 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 2.5 2 40 35 30 1.5 Mounted on glass-epoxy substrate with 1oz/ft2_5x7mm copper pad. 1 25 20 15 10 0.5 RESISTIVE OR INDUCTIVE LOAD 5 0 0 0 25 50 75 100 125 150 1 175 10 FIG.3 - TYP ICAL FORWORD CHARACTERISTICS FIG.4- TYPICAL JUNCTION CAPACITANCE 1000 CAPACITANCE, (pF) 100 10 Tj=150C Tj=125C 100 1 Tj=25C 10 1 10 REVERSE VOLTAGE, (V) 0.1 0.2 0.4 0.6 0.8 1 1.2 INSTANTANEO US FO RWARD VOLTAGE, (V) FIG.5- TYPICAL REVERSE CHARACTERISTICS 1 INSTANTANEOUS REVERSE CURRENT, (mA) INSTANTANEOUS FORWARD CURRENT, (A) 100 NUMBER OF CYCLES AT 60Hz LEAD TEMAERATURE, ( C) Tj=150C 0.1 Tj=125C 0.01 Tj=100C 0.001 Tj=75C 0.0001 Tj=50C 0.00001 Tj=25C 0.000001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 120 100 Legal Disclaimer Notice 1N5406G-F Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.