0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections FX11 Series Stacking height : 2mm Stacking height : 2.5mm, 3mm Features 10 Signal: 1 Ground Arrangement 1. Low Profile Design The board to board mating height of 2mm, 2.5mm and 3mm suits smaller, thinner case designs. 2. Improved Transmission Efficiency Between Boards Transmission characteristics have been improved through a design that fixes ground plates to both sides of the header and receptacle. Ground Plate Signal contact m 5m 0.7 Housing 3. 10 Signal:1 Ground Arrangement Signal and ground are arranged in a ratio of 10:1 with the ground plate SMT connected to the board. The ground stability achieved serves to reduce noise. 4. Metal Fittings for Added Solder Weld Strength Metal fittings provide greater adhesion to the board, protecting against peeling.The unique connector design provides a connection between the fitting and the ground plate for a stronger ground. m 5m 0.7 Stacking height variation 2mm The signal contact pitch of 0.5mm produces a smaller connector utilizing less board area for mounting. A solder gap has been designed into the contact SMT portion to prevent solder wicking. 0.5 Ground plate and metal fitting make contact 5. Suited to High-Density Applications 6. Structure Prevents Solder Wicking mm Metal fitting 2. 5 , 3 mm Note: 2.0mm type and 2.5mm, 3mm type are not mated with each other. Structure Prevent solder vicking 7. High contact reliability Effective mating length is 0.55mm (2mm height), 1mm(2.5mm, 3mm height) for signal contacts. 8. Optional Ground Plate An alternate style without the ground plate is available.The space provided by the ground plate removal has been filled with additional signal contacts. Solder gap portion Contact surface Board mounting portion Land Applications Notebook computers, PDA, and other miniature electronic equipment. 2013.1 1 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections BStacking height variation With ground plate Header Receptacle FX11L#-P / -SV FX11L#-S / -SV 2mm Header Receptacle FX11#-P / -SV FX11#-P / -SV0.5 2.5mm 3mm FX11#-S / -SV Without ground plate Header Receptacle FX11L#-P-SV FX11L#-S-SV 2mm Header Receptacle FX11#-P-SV FX11#-P-SV0.5 2.5mm 3mm FX11#-S-SV Note 1: The thickness of the solder paste is not included in the stacking height. Note 2: 2mm type and 2.5mm, 3mm type, with ground plate type and without ground type are not mated with each other. BCross section of mating Signal portion 0.55 (Effective mating length) 0.55 (Effective mating length) Stacking height : 2mm Ground portion Header Receptacle Signal portion 0.9 (Effective mating length) 1 (Effective mating length) Stacking height : 2.5mm, 3mm Ground portion Header Receptacle (Shown for stacking height 2.5mm type.) 2 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections Signal integrity Pin assignment To match 100 ohm differential impedance and to reduce crosstalk, a staggered GSSG pin assignment is recommended.(G=ground and S=signal) GSSG Signal Diff pair Ground Impedance The differential impedance is 100 +/- 10 ohm for FX11 at 50 ps rise time(20% to 80%). 3mm(Without GND) 120 115 110 Z (Ohm) 105 100 95 90 85 FX11- 3mm DifferentialTDR 80 0.8 0.9 1 1.1 1.2 Time (ns ) 1.3 1.4 1.5 Insertion-loss-to-crosstalk ratio (ICR) The insertion-loss-to-crosstalk ratio (ICR) with five differential FEXT aggressors meets the extrapolated IEEE802.3ap specification to 10+ Gbps. 3mm(Without GND) 60 50 ICR (dB) 40 30 20 10 0 0 ICR IEEEspec 1 2 3 4 5 6 Frequency (GHz) 7 8 9 10 3 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections Stacking height : 2mm Product Specifications Rated current 0.3 A (Note 1) Operating temperature range -55 to 85c Rating Rated voltage 50 V AC Storage temperature range -10 to +60c (Note 2) Relative humidity 95% or less Storage humidity range Operating humidity range -40 to -70% (Note 2) (No condensation) Item Requirements Conditions 1. Insulation resistance 100 Mo or greater Measured at 100 V DC 2. Voltage proof No flashover or breakdown 150 V AC applied for one minute 3. Contact resistance 60 mo or less Measured at 100 mA 4. Vibration No electrical discontinuity for 1s or greater No damage, cracks, or parts looseness Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions, 10 cycles each 5. Shock No electrical discontinuity for 1s or longer No damage, cracks, or parts looseness Acceleration of 490 m/s2, 11ms duration, sine half-wave waveform,for 3 cycles in the both directions of each of the 3 axes 6. Damp heat (Steady state) Contact resistance of 70 mo or less, insulation resistance of 100 Mo or greater, no damage, cracks, or parts looseness Temperature of 40c, humidity of 90 to 95%, duration 96 h 7. Temperature cycle Contact resistance of 70 mo or less, insulation resistance of 100 Mo or greater, no damage, cracks, or parts looseness Temperature: -55c 15 to 35c 85c 15 to 35c Time: 30 min. 2 to 3 min. 30 min. 2 to 3 min. for 5 cycles 8. Durability Contact resistance of 70 mo or less No damage, cracks, or parts looseness 50 times 9. Resistance to soldering heat No melting of resin portion which affects performance Reflow: At the recommended temperature profile Soldering iron temperature: 360c for 5 seconds Note 1: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period. The operating temperature and humidity range are applied to the non-conducting condition following board assembly. Note 2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials Part Insulator Contacts Ground plate Metal fitting Metal plate Material Finish Remarks LCP Beige Copper alloy Header Engagement Area: Gold plating of 0.1m UL94V-0 Phosphor bronze Receptacle Termination Area: Flash plating Phosphor bronze Tin plating Phosphor bronze Tin plating ------------------------------------- Ordering information FX11L # - P - / - SV ( ) Type With Ground Plate 1 2 4 5 6 3 Type Without Ground Plate FX11L # - P - SV ( ) 1 2 1 Series name : FX11L 2 Form Symbol 3 Number of contacts Type with ground plate 3 4 5 4 A : With guide post S : Receptacle 5 Signal: 68, 92, 116, 140 4 Contact form SV : Straight SMT Signal/Ground:60/6, 80/8, Type without ground Connector type P : Header B : Without guide post 100/10, 120/12 6 6 Blank, (71): Tray packaging (Without pick-and-place tape) (21),(91): Embossed tape packaging (Without pick-and-place tape) (22),(92): Embossed tape packaging (With pick-and-place tape) FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections Header with ground Plate A0.2 2mm stacking height 0.20.05 1.20.2 5.050.2 5.250.3 (0.5) (0.75) (0.75) (6) B0.2 1.90.3 C0.3 (0.6) 2-(O0.8) D0.1 Guidepost Unit : mm Part Number CL No. FX11LA-060P/06-SV(71) 573-0002-7-71 Number of contacts Signal 60 A B C D E F 6 17.5 12 22.6 18 19.4 25.5 Ground FX11LA-080P/08-SV(71) 573-0003-0-71 80 8 23.5 18 28.6 24 25.4 31.5 FX11LA-100P/10-SV(71) 573-0004-2-71 100 10 29.5 24 34.6 30 31.4 37.5 FX11LA-120P/12-SV(71) 573-0005-5-71 120 12 35.5 30 40.6 36 37.4 43.5 FX11LB-060P/06-SV(71) 573-0012-0-71 60 6 17.5 12 22.6 ---------- 19.4 25.5 FX11LB-080P/08-SV(71) 573-0013-3-71 80 8 23.5 18 28.6 ---------- 25.4 31.5 FX11LB-100P/10-SV(71) 573-0014-6-71 100 10 29.5 24 34.6 ---------- 31.4 37.5 FX11LB-120P/12-SV(71) 573-0015-9-71 120 12 35.5 30 40.6 ---------- 37.4 43.5 Remarks RoHS With guideposts YES Without guideposts [Specifications number] - **, (**) (71): Tray packaging (91) : Embossed tape packaging (Without pick-and-place tape) (92) : Embossed tape packaging (With pick-and-place tape) Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) 4 Recommended metal mask thickness: 0.15 mm F min C +00.1 0.250.05 30.05 O10.05 1 60.05 0.70.03(Land) 0.60.03(Metal mask) B0.05 6.7min 1.8 +00.1 3 O0.90.05 4 0.750.03 5.65 +00.1 0.750.03 3.85 --00.1 A0.05 0.50.03 2.95 --00.1 D0.05 2.25 --00.1 2 E --00.1 3 0.30.03(Land) 0.250.03(Metal Mask) Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits. 2 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 3 Not required in products without guideposts. 4 Do not mount a part other than this product in the area of . Doing so will prevent the engagement of this and the mating connector. 5 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections Receptacle with ground Plate A0.2 2mm stacking height 60.2 0.50.05 0.20.05 1.20.2 6.20.3 (0.5) (0.75) (0.75) 1.650.3 (6) B0.2 C0.3 2-(O0.8) (0.6) D0.1 Guidepost Unit : mm Part Number CL No. FX11LA-060S/06-SV(71) 573-0102-1-71 Number of contacts Signal A B C D E F 6 17.5 12 25 20.8 25.4 22.2 Ground 60 Remarks FX11LA-080S/08-SV(71) 573-0103-4-71 80 8 23.5 18 31 26.8 31.4 28.2 FX11LA-100S/10-SV(71) 573-0104-7-71 100 10 29.5 24 37 32.8 37.4 34.2 FX11LA-120S/12-SV(71) 573-0105-0-71 120 12 35.5 30 43 38.8 43.4 40.2 FX11LB-060S/06-SV(71) 573-0112-5-71 60 6 17.5 12 25 ---------- 25.4 22.2 FX11LB-080S/08-SV(71) 573-0113-8-71 80 8 23.5 18 31 ---------- 31.4 28.2 FX11LB-100S/10-SV(71) 573-0114-0-71 100 10 29.5 24 37 ---------- 37.4 34.2 FX11LB-120S/12-SV(71) 573-0115-3-71 120 12 35.5 30 43 ---------- 43.4 40.2 RoHS With guideposts YES Without guideposts [Specifications number] - **, (**) (71): Tray packaging (Without pick-and-place tape) (91) : Embossed tape packaging (Without pick-and-place tape) (92) : Embossed tape packaging (With pick-and-place tape) Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm E+00.1 F --00.1 4 --00.1 6.6 +00.1 0.750.03 1.8 +00.1 0.750.03 4.8 --00.1 A0.05 0.50.03 2.2 --00.1 3 D0.05 2 4 O0.90.05 O10.05 1.650.05 1 4.40.05 60.05 0.70.03(Land) 0.60.03(Metal mask) B0.05 4 0.30.03(Land) 0.250.03(Metal mask) Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits. 2 Cross-hatched portions, 2 places on both sides, indicate the metal fittings. 3 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 4 Not required in products without guideposts. 6 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections Header without ground Plate A0.2 2mm stacking height 1.20.2 0.20.05 1.90.3 5.050.2 5.250.3 (0.5) B0.3 1-(O0.8) (0.6) C0.1 Guidepost Unit : mm Part Number CL No. FX11LA- 68P-SV(**) 573-0042-1-** FX11LA- 92P-SV(**) 573-0043-4-** FX11LA-116P-SV(**) 573-0044-7-** FX11LA-140P-SV(**) 573-0045-0-** FX11LB- 68P-SV(**) 573-0052-5-** FX11LB- 92P-SV(**) FX11LB-116P-SV(**) FX11LB-140P-SV(**) Number of contacts A B C D E 68 16.5 22.6 18 19.4 25.5 92 22.5 28.6 24 25.4 31.5 116 28.5 34.6 30 31.4 37.5 140 34.5 40.6 36 37.4 43.5 68 16.5 22.6 ---------- 19.4 25.5 573-0053-8-** 92 22.5 28.6 ---------- 25.4 31.5 573-0054-0-** 116 28.5 34.6 ---------- 31.4 37.5 573-0055-3-** 140 34.5 40.6 ---------- 37.4 43.5 Signal Remarks RoHS With guideposts YES Without guideposts [Specifications number] - **, (**) Blank: Tray packaging (Without pick-and-place tape) (21) : Embossed tape packaging (Without pick-and-place tape) (22) : Embossed tape packaging (With pick-and-place tape) Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm 3 E min B +00.1 2 O10.05 O0.90.05 0.750.05 6.7min 1.8 +00.1 5.65 +00.1 0.50.03 3 A0.05 3.85 --00.1 C0.05 2.25 --00.1 1 D--00.1 2 0.30.03(Land) 0.250.03(Metal mask) Note 1 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 2 Not required in products without guideposts. 3 Do not mount a part other than this product in the area of . Doing so will prevent the engagement of this and the mating connector. 7 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections Receptacle without ground Plate A0.2 2mm stacking height B0.2 60.2 1.650.3 6.20.3 0.50.05 0.20.05 (0.5) C0.3 (0.6) D0.1 Guidepost Unit : mm Part Number CL No. FX11LA- 68S-SV(**) 573-0142-6-** FX11LA- 92S-SV(**) 573-0143-9-** FX11LA-116S-SV(**) 573-0144-1-** FX11LA-140S-SV(**) 573-0145-4-** FX11LB- 68S-SV(**) 573-0152-0-** FX11LB- 92S-SV(**) FX11LB-116S-SV(**) FX11LB-140S-SV(**) Number of contacts A B C D 68 18 16.5 25 20.8 92 24 22.5 31 26.8 116 30 28.5 37 32.8 140 36 34.5 43 38.8 68 18 16.5 25 ---------- 573-0153-2-** 92 24 22.5 31 ---------- 573-0154-5-** 116 30 28.5 37 ---------- 573-0155-8-** 140 36 34.5 43 ---------- Signal Remarks RoHS With guideposts YES Without guideposts [Specifications number] - **, (**) Blank: Tray packaging (Without pick-and-place tape) (21) : Embossed tape packaging (Without pick-and-place tape) (22) : Embossed tape packaging (With pick-and-place tape) Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm D0.05 O10.05 O0.90.05 2.150.05 0.30.03(Land) 0.250.03(Metal mask) 6.6 +00.1 4 --00.1 2 4.8 --00.1 0.50.03 0 2.2 -- 0.1 1 A0.05 B0.05 2 0.70.03(Land) 0.60.03(Metal mask) Note 1 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 2 Not required in products without guideposts. 8 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections Stacking height : 2.5mm, 3mm Product Specifications Rated current 0.3 A (Note 1) Operating temperature range -55 to 85c Rating Rated voltage 50 V AC Storage temperature range -10 to +60c (Note 2) Relative humidity 95% or less Storage humidity range Operating humidity range -40 to -70% (Note 2) (No condensation) Item Requirements Conditions 1. Insulation resistance 100 Mo or greater Measured at 100 V DC 2. Voltage proof No flashover or breakdown 150 V AC applied for one minute 3. Contact resistance 70 mo or less Measured at 100 mA 4. Vibration No electrical discontinuity for 1s or greater No damage, cracks, or parts looseness Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions, 10 cycles each 5. Shock No electrical discontinuity for 1s or longer No damage, cracks, or parts looseness Acceleration of 490 m/s2, 11ms duration, sine half-wave waveform,for 3 cycles in the both directions of each of the 3 axes 6. Damp heat (Steady state) Contact resistance of 80 mo or less, insulation resistance of 100 Mo or greater, no damage, cracks, or parts looseness Temperature of 40c, humidity of 90 to 95%, duration 96 h 7. Temperature cycle Contact resistance of 80 mo or less, insulation resistance of 100 Mo or greater, no damage, cracks, or parts looseness Temperature: -55c 15 to 35c 85c 15 to 35c Time: 30 min. 2 to 3 min. 30 min. 2 to 3 min. for 5 cycles 8. Durability Contact resistance of 80 mo or less No damage, cracks, or parts looseness 50 times 9. Resistance to soldering heat No melting of resin portion which affects performance Reflow: At the recommended temperature profile Soldering iron temperature: 360c for 5 seconds Note 1: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period. The operating temperature and humidity range are applied to the non-conducting condition following board assembly. Note 2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials Part Insulator Contacts Ground plate Metal fitting Metal plate Material Finish Remarks LCP Beige UL94V-0 Copper alloy Header Engagement Area: Gold plating of 0.1m Phosphor bronze Receptacle Termination Area: Flash plating Phosphor bronze Tin plating Phosphor bronze Tin plating ------------------------------------- Ordering information FX11 # - P / - SV 0.5 ( ) Type With Ground Plate 1 2 4 5 6 7 3 FX11 # - P - SV 0.5 ( ) Type Without Ground Plate 1 2 1 Series name : FX11 2 Form Symbol 3 Number of contacts Type with ground plate 3 4 5 4 A : With guide post B : Without guide post 5 6 Signal/Ground:60/6, 80/8, 100/10 Type without ground Signal: 80, 100 7 6 7 Connector type P : Header S : Receptacle Contact form SV : Straight SMT Product height Blank: Standard 0.5 : Standard + 0.5mm Blank, (71): Tray packaging (Without pick-and-place tape) (21),(91): Embossed tape packaging (Without pick-and-place tape) (22),(92): Embossed tape packaging (With pick-and-place tape) 9 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections Header with ground plate A0.2 2.5mm stacking height (0.5 ) 0.5 0.05 1.20.2 5.050.2 5.250.3 0.2 0.05 (0.75) (0.75) (6 ) 2.13 0.3 B0.2 (0.6) C0.3 2-( O0.8 ) Guidepost D0.1 Unit : mm Number of contacts Part Number CL No. FX11A- 60P/06-SV(71) 573-0502-0-71 60 FX11A- 80P/08-SV(71) 573-0503-2-71 FX11A-100P/10-SV(71) A B C D E F 6 17.5 12 22.6 18 19.4 25.5 80 8 23.5 18 28.6 24 25.4 31.5 573-0504-5-71 100 10 29.5 24 34.6 30 31.4 37.5 FX11B- 60P/06-SV(71) 573-0512-3-71 60 6 17.5 12 22.6 ---------- 19.4 25.5 FX11B- 80P/08-SV(71) 573-0513-6-71 80 8 23.5 18 28.6 ---------- 25.4 31.5 Without guideposts FX11B-100P/10-SV(71) 573-0514-9-71 100 10 29.5 24 34.6 ---------- 31.4 37.5 Signal Ground Remarks RoHS With guideposts YES [Specifications number] - **, (**) (71): Tray packaging (Without pick-and-place tape) (91) : Embossed tape packaging (Without pick-and-place tape) (92) : Embossed tape packaging (With pick-and-place tape) Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) 4 F min Recommended metal mask thickness: 0.15 mm C +0.1 0 E 0 O0.9 0.05 0.25 0.05 3 0.05 O10.05 1 6 0.05 0.7 0.03 (Land) 0.60.03(Metal mask) 6.7 min 4 3 5.65 1.8 +0.1 0 +0.1 0 0 3.85 -0.1 0 -0.1 0 0.75 0.03 2.95 0.75 0.03 2.25 -0.1 A 0.05 0.5 0.03 2 D0.05 3 0.30.03 (Land) 0.250.03(Metal mask) B0.05 Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits. 2 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 3 Not required in products without guideposts. 4 Do not mount a part other than this product in the area of . Doing so will prevent the engagement of this and the mating connector. 10 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections Header with ground plate A0.2 3mm stacking height (0.5) 0.50.05 1.20.2 5.050.2 5.250.3 0.20.05 (0.75) (0.75) (6) 2.630.3 B0.2 (0.6) C0.3 Guidepost 2-(O0.8) D0.1 Unit : mm Part Number Number of contacts CL No. Signal Ground A B C D E F Remarks FX11A- 60P/ 6-SV0.5(71) 573-0602-4-71 60 6 17.5 12 22.6 18 19.4 25.5 FX11A- 80P/ 8-SV0.5(71) 573-0603-7-71 80 8 23.5 18 28.6 24 25.4 31.5 FX11A-100P/10-SV0.5(71) 573-0604-0-71 100 10 29.5 24 34.6 30 31.4 37.5 FX11B- 60P/ 6-SV0.5(71) 573-0612-8-71 60 6 17.5 12 22.6 ---------- 19.4 25.5 FX11B- 80P/ 8-SV0.5(71) 573-0613-0-71 80 8 23.5 18 28.6 ---------- 25.4 31.5 Without guideposts FX11B-100P/10-SV0.5(71) 573-0614-3-71 100 10 29.5 24 34.6 ---------- 31.4 37.5 RoHS With guideposts YES [Specifications number] - **, (**) (71): Tray packaging (Without pick-and-place tape) (91) : Embossed tape packaging (Without pick-and-place tape) (92) : Embossed tape packaging (With pick-and-place tape) Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) 4 Fmin Recommended metal mask thickness: 0.15 mm C +0.1 0 E 0 -0.1 3 O0.9 0.05 0.250.05 O10.05 1 6 0.05 0.70.03 (Land) 0.60.03(Metal mask) 3 0.05 6.7 min 4 1.8 +0.1 0 5.65 +0.1 0 0 3.85 -0.1 0.750.03 0 2.95 -0.1 0.75 0.03 0 2.25 -0.1 A0.05 0.5 0.03 2 D0.05 3 0.30.03 (Land) 0.250.03(Metal mask) B0.05 Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits. 2 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 3 Not required in products without guideposts. 4 Do not mount a part other than this product in the area of . Doing so will prevent the engagement of this and the mating connector. 11 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections Receptacle with ground plate A0.2 2.5mm, 3mm stacking height (0.5) 0.50.05 60.2 1.20.2 6.20.3 0.20.05 (0.75) (0.75) (6) 2.10.3 B0.2 (0.6) C0.3 Guidepost 2-(O0.8) D0.1 Number of contacts Part Number CL No. FX11A- 60S/ 6-SV(71) 573-0702-9-71 60 FX11A- 80S/ 8-SV(71) 573-0703-1-71 FX11A-100S/10-SV(71) Unit : mm A B C D E F 6 17.5 12 25 20.8 25.4 22.2 80 8 23.5 18 31 26.8 31.4 28.2 573-0704-4-71 100 10 29.5 24 37 32.8 37.4 34.2 FX11B- 60S/ 6-SV(71) 573-0712-2-71 60 6 17.5 12 25 ---------- 25.4 22.2 FX11B- 80S/ 8-SV(71) 573-0713-5-71 80 8 23.5 18 31 ---------- 31.4 28.2 Without guideposts FX11B-100S/10-SV(71) 573-0714-8-71 100 10 29.5 24 37 ---------- 37.4 34.2 Signal Ground Remarks RoHS With guideposts YES [Specifications number] - **, (**) (71): Tray packaging (Without pick-and-place tape) (91) : Embossed tape packaging (Without pick-and-place tape) (92) : Embossed tape packaging (With pick-and-place tape) Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) E +0.1 0 Recommended metal mask thickness: 0.15 mm 0 F -0.1 D0.05 3 A0.05 4 O0.90.05 1.650.05 4.40.05 6.6 +0.1 0 4 0 -0.1 0 4.8 -0.1 2 0.750.03 1.8 +0.1 0 0.750.03 0 2.2 -0.1 0.50.03 O10.05 60.05 0.70.03(Land) 0.60.03(Metal mask) 4 0.30.03(Land) 0.250.03(Metal mask) B0.05 Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits. 2 Cross-hatched portions, totaling 2 places, indicate the metal fittings. 3 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 4 Not required in products without guideposts. 12 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections Header without ground Plate A0.2 2.5mm stacking height 1.20.2 5.050.2 0.20.05 2.130.3 5.250.3 (0.5) (0.6) B0.3 Guidepost 2-(O0.8) C0.1 Unit : mm Part Number CL No. FX11A- 80P-SV(**) 573-0548-0-** FX11A-100P-SV(**) Number of contacts A B C D E 80 19.5 24.6 20 21.4 27.5 573-0543-7-** 100 24.5 29.6 25 26.4 32.5 FX11B- 80P-SV(**) 573-0558-4-** 80 19.5 24.6 ---------- 21.4 27.5 FX11B-100P-SV(**) 573-0553-0-** 100 24.5 29.6 ---------- 26.4 32.5 Signal Remarks RoHS With guideposts YES Without guideposts [Specifications number] - **, (**) Blank: Tray packaging (Without pick-and-place tape) (21) : Embossed tape packaging (Without pick-and-place tape) (22) : Embossed tape packaging (With pick-and-place tape) Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) 3 E min Recommended metal mask thickness: 0.15 mm B +0.1 0 O0.90.05 0.250.05 O10.05 3 2 6.7min 3.85 1.8 +0.1 0 5.65 +0.1 0 0.50.03 0 -0.1 A0.05 0 2.25 -0.1 C0.05 1 0 D -0.1 2 0.3(Land) 0.250.03(Metal mask) Note 1 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 2 Not required in products without guideposts. 3 Do not mount a part other than this product in the area of . Doing so will prevent the engagement of this and the mating connector. 13 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections Header without ground Plate A0.2 3mm stacking height 1.20.2 5.050.2 0.20.05 2.130.3 5.250.3 (0.5) (0.6) B0.3 Guidepost 2-(O0.8) C0.1 Unit : mm Part Number CL No. Number of contacts Signal A B C D E Remarks FX11A- 80P-SV0.5(**) 573-0648-5-** 80 19.5 24.6 20 21.4 27.5 FX11A-100P-SV0.5(**) 573-0643-1-** 100 24.5 29.6 25 26.4 32.5 FX11B- 80P-SV0.5(**) 573-0658-9-** 80 19.5 24.6 ---------- 21.4 27.5 FX11B-100P-SV0.5(**) 573-0653-5-** 100 24.5 29.6 ---------- 26.4 32.5 RoHS With guideposts YES Without guideposts [Specifications number] - **, (**) Blank: Tray packaging (Without pick-and-place tape) (21) : Embossed tape packaging (Without pick-and-place tape) (22) : Embossed tape packaging (With pick-and-place tape) Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) 3 E min B Recommended metal mask thickness: 0.15 mm +0.1 0 2 O0.90.05 0.250.05 O10.05 6.7min 3 1.8 +0.1 0 5.65 +0.1 0 3.85 0 -0.1 A0.05 0.50.03 0 2.25 -0.1 C0.05 1 0 D -0.1 2 0.3(Land) 0.250.03(Metal mask) Note 1 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 2 Not required in products without guideposts. 3 Do not mount a part other than this product in the area of . Doing so will prevent the engagement of this and the mating connector. 14 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections Receptacle without ground plate A0.2 2.5mm, 3mm stacking height 2.10.3 6 0.2 0.2 0.05 1.2 0.2 6.2 0.3 ( 0.5 ) (0.6) B0.3 2-( O0.8 ) Guidepost C0.1 Unit : mm Part Number CL No. FX11A- 80S-SV(**) 573-0748-0-** FX11A-100S-SV(**) Number of contacts A B C D E 80 19.5 27 22.8 27.4 24.2 573-0743-6-** 100 24.5 32 27.8 32.4 29.2 FX11B- 80S-SV(**) 573-0758-3-** 80 19.5 27 ---------- 27.4 24.2 FX11B-100S-SV(**) 573-0753-0-** 100 24.5 32 ---------- 32.4 29.2 Signal Remarks RoHS With guideposts YES Without guideposts [Specifications number] - **, (**) Blank: Tray packaging (Without pick-and-place tape) (21) : Embossed tape packaging (Without pick-and-place tape) (22) : Embossed tape packaging (With pick-and-place tape) Note 1: There is no polarity in terms of board mounting for this product. Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less. Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.) BRecommended Land Pattern Dimensions (Metal Mask Dimensions) Recommended metal mask thickness: 0.15 mm D+0.1 0 0 E -0.1 2 O0.9 0.05 O10.05 1.650.05 6.6 +0.1 0 0 4.8 -0.1 1.8 +0.1 0 0.50.03 0 2.2 -0.1 A 0.05 1 C0.05 2 0.30.03 (Land) 0.250.03(Metal mask) Note 1 The cross-hatched area inside the SMT land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the SMT land width. 2 Not required in products without guideposts. 15 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections BEmbossed Carrier Tape Dimensions Header O1.5 +0.1 0 ( 0.9 ) ( 0.4 ) C0.3 B0.1 A0.1 2 0.1 4 0.1 1.75 0.1 120.1 ( F) 0.2 0.05 Unreeling direction R0.75 +0.05 0 120.1 4 0.1 O1.5 +0.1 0 (F) ( 0.4) B0.1 C0.3 A0.1 2 0.1 1.75 0.1 Receptacle 0.2 0.05 Unreeling direction R0.75 +0.05 0 (O80) (O330) Reel Dimensions O130.5 (D) (E) 16 ( 0.9) Unit : mm Insertion Connector A B C D E F FX11L#- 60P/ 6 -SV 20.2 40.4 44 45.5 50.5 FX11L#- 80P/ 8 -SV FX11L#-100P/10-SV 26.2 52.4 56 59 64 FX11L#-120P/12-SV 1.98 FX11L#- 68P -SV 20.2 40.4 44 45.5 50.5 FX11L#- 92P -SV FX11L#-116P -SV 26.2 52.4 56 59 64 FX11L#-140P -SV FX11 #- 60P/ 6 -SV 20.2 40.4 44 45.5 50.5 FX11 #- 80P/ 8 -SV FX11 #-100P/10-SV 26.2 52.4 56 59 64 2.48 FX11 #- 80P -SV 20.2 40.4 44 45.5 50.5 FX11 #-100P -SV FX11 #- 60P/ 6 -SV0.5 20.2 40.4 44 45.5 50.5 FX11 #- 80P/ 8 -SV0.5 FX11 #-100P/10-SV0.5 26.2 52.4 56 59 64 2.98 FX11 #- 80P -SV0.5 20.2 40.4 44 45.5 50.5 FX11 #-100P -SV0.5 Note 1: There is no polarity in terms of embossed tape packaging for this product. Note 2: Left figure is representative of products with ground plates. Unit : mm Insertion Connector A B C D E F FX11L#- 60S/ 6 -SV 20.2 40.4 44 45.5 50.5 FX11L#- 80S/ 8 -SV FX11L#-100S/10-SV 26.2 52.4 56 59 64 FX11L#-120S/12-SV 2 FX11L#- 68S -SV 20.2 40.4 44 45.5 50.5 FX11L#- 92S -SV FX11L#-116S -SV 26.2 52.4 56 59 64 FX11L#-140S -SV FX11 #- 60S/ 6 -SV 20.2 40.4 44 45.5 50.5 FX11 #- 80S/ 8 -SV FX11 #-100S/10-SV 26.2 52.4 56 59 64 2.45 FX11 #- 80S -SV 20.2 40.4 44 45.5 50.5 FX11 #-100S -SV Note 1: There is no polarity in terms of embossed tape packaging for this product. Note 2: Left figure is representative of products with ground plates. FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections BRecommended Temperature Profile (MAX250c) 260 HRS test conditions Test boardGlass epoxy 60mm35mm1.6mm thick 240 220c 220 Temperature (c) Solder method 200c 200 : Reflow Solder composition : Paste,96.5%Sn/ 3%Ag/ 0.5%Cu 180 Metal mask : 0.15mm thick 160 Reflow cycles : 2 cycles 150c 140 The temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and 0 (90 to 120 sec.) Preheating(150 to 200c) (60 sec. max.) Time(sec.) Soldering (220c min) board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. Note : The temperature profile indicates the maximum temperature of the connector surfaces at the highest point from the PCB mounting surface. BWashing Conditions Organic Solvent Washing Solvent IPA(Isopropyl alcohol) HCFC(Hydrochlorofluorocarbon) Room temperature washing Heated washing Yes Yes Yes Yes Water Type Washing When using water type cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins. Be careful that parts are not left with moisture remaining on them. Washing Precautions Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to the deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed. BConnector Handling Precautions 1. Allowable Creepage Dimensions at Time of Mating [Stacking height : 2mm] The effective coupling length of this product is 0.55 mm for the signal portion and the ground portion. The creepage of the header and receptacle at the time of mating should be within 0.18 mm of the completely coupled condition. [Stacking height : 2.5mm, 3mm] The effective coupling length of this product is 1 mm for the signal portion and 0.7mm for the ground portion. The creepage of the header and receptacle at the time of mating should be within 0.4 mm of the completely coupled condition. 2. Compatibility 2mm type and 2.5mm, 3mm type, with ground plate type and without ground type are not mated with each other. 3. Retension of Boards Avoid the support of boards by connectors alone and adopt a board locking measure that does not rely on the connectors. 4. Solder Repair Flux may rise as far as the contact portion of the connector depending on the flux coating and other factors at the time of repair. This will cause poor contact reliability; therefore, before use, the aforementioned washing conditions should be taken into consideration prior to connector washing. 5. Miscellaneous *Note that excessive twisting while inserting or withdrawing connectors will cause damage. *The shade of the molded items may vary somewhat depending on the manufacturing lot; however, this does not affect performance. 17 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections NOTES : 18 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections NOTES : 19 FX11 Series0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections USA: HIROSE ELECTRIC (U.S.A.), INC. Headquarters 2688 Westhills Court, Simi Valley, CA 93065-6235 Phone : +1-805-522-7958 Fax : +1-805-522-3217 http://www.hiroseusa.com USA: HIROSE ELECTRIC (U.S.A.), INC. San Jose Office 20400 Stevens Creek Blvd., Ste 250, Cupertino, CA 95014 Phone : +1-408-253-9640 Fax : +1-408-253-9641 http://www.hiroseusa.com USA: HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive) 37677 Professional Center Drive, Suite #100C Livonia, MI 48154 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hiroseusa.com THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-20-6557460 Fax : +31-20-6557469 http://www.hiroseeurope.com GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Herzog-Carl-Strasse 4 D-73760 Ostfildern (Scharnhauser Park) Phone : +49-711-4560-02-1 Fax : +49-711-4560-02-299 http://www.hirose.de UNITED KINGDOM: HIROSE ELECTRIC EUROPE B.V. UK BRANCH First Floor, St Andrews House, Caldecotte Lake Business Park, Milton Keynes MK7 8LE Phone : +44-1908-369060 Fax : +44-1908-369078 http://www.hirose.co.uk CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 1601,Henderson Metropolitan,NO.300 ,East Nanjing Road,Huangpu District, Shanghai,China 200001 Phone : +86-21-6391-3355 Fax : +86-21-6391-3335 http://www.hirose-china.com.cn CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. BEIJING BRANCH A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, Chao Yang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose-china.com.cn CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre 5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008 Phone : +86-755-8207-0851 Fax : +86-755-8207-0873 http://www.hirose-china.com.cn HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +852-2803-5338 Fax : +852-2591-6560 http://www.hirose-hongkong.com.hk TAIWAN: KOREA: HIROSE KOREA CO., LTD. 1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do 429-450 Phone : +82-31-496-7000,7124 Fax : +82-31-496-7100 http://www.hirose.co.kr SINGAPORE: HIROSE ELECTRIC SINGAPORE PTE. LTD. 10 Anson Road #26-16 International Plaza 079903 Phone : +65-6324-6113 Fax : +65-6324-6123 http://www.hirose-singapore.com.sg INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No.03, Ground Floor, Explorer Building International Tech Park Whitefield Road, Bangalore 560066 Karnataka, India Phone : +65-6324-6113 Fax : +65-6324-6123 http://www.hirose-singapore.com.sg (R) 20 HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw 6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 01/2013. Contents are subject to change without notice for the purpose of improvements.