HA-2500/883 HA-2502/883 Precision High Slew Rate Operational Amplifiers July 1997 Features Description * This Circuit is Processed in Accordance to MIL-STD883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. HA-2500/883 and HA-2502/883 comprise a series of monolithic operational amplifiers whose designs are optimized to deliver excellent slew rate, bandwidth, and settling time specifications. The outstanding dynamic features of this internally compensated device are complemented with low offset voltage and offset current. * High Slew Rate (HA-2500/883) . . . . . . . . . 25V/s (Min) 30V/s (Typ) * Wide Power Bandwidth (HA-2500/883). . . 350kHz (Min) These dielectrically isolated amplifiers are ideally suited for applications such as data acquisition, RF, video, and pulse conditioning circuits. Guaranteed slew rates of 25V/s minimum (HA-2500/883) and 20V/s minimum (HA-2502/883) make these devices excellent components in fast, accurate data acquisition and pulse amplification designs. To insure compliance, all devices are 100% tested for AC performance characteristics over the full temperature limits. * High Input Impedance (HA-2500/883). . . . . 25M (Min) 50M (Typ) * Low Offset Current (HA-2500/883) . . . . . . . 25nA (Max) 10nA (Typ) * Low Quiescent Current . . . . . . . . . . . . . . . . . 6mA (Max) * Fast Settling Time (0.1% of 10V Step) . . . . 330ns (Typ) * Data Acquisition Systems A typical 12MHz gain bandwidth product and 500kHz full power bandwidth make these devices well suited to RF and video applications. With guaranteed offset voltages of 5mV (HA-2500/883) and 8mV (HA-2502/883) plus external offset adjust flexibility and low offset current, these amplifiers are particularly useful components in signal conditioning designs. * RF Amplifiers Ordering Information * High Gain Bandwidth Product . . . . . . . . . 12MHz (Typ) * Internally Compensated For Unity Gain Stability Applications * Video Amplifiers TEMP. RANGE (oC) PART NUMBER * Signal Generators * Pulse Amplification PACKAGE PKG. NO. HA2-2500/883 -55 to 125 8 Pin Can T8.C HA2-2502/883 -55 to 125 8 Pin Can T8.C HA7-2500/883 -55 to 125 8 Ld CERDIP F8.3A Pinouts HA-2500/883 (CERDIP) TOP VIEW HA-2500/883, HA-2502/883 (METAL CAN) TOP VIEW COMP BAL 1 -IN 2 +IN 3 V- 4 8 + 8 COMP 7 V+ 6 OUT 5 BAL BAL 1 + 2 -IN +IN 7 V+ 6 OUT 5 3 BAL 4 V- CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright (c) Intersil Corporation 1999 1 511002-883 File Number 3734.1 Spec Number HA-2500/883, HA-2502/883 Absolute Maximum Ratings Thermal Information Voltage Between V+ and V- Terminals . . . . . . . . . . . . . . . . . . . . 40V Differential Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V Voltage at Either Input Terminal . . . . . . . . . . . . . . . . . . . . . . V+ to VPeak Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA ESD Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <2000V Thermal Resistance (Typical, Note 1) JA JC CERDIP Package . . . . . . . . . . . . . . . . . . 115oC/W 28oC/W Metal Can Package . . . . . . . . . . . . . . . . . 160oC/W 75oC/W Package Power Dissipation Limit at 75oC for TJ 175oC CERDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 870mW Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 625mW Package Power Dissipation Derating Factor Above 75oC CERDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.7mW/oC Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3mW/oC Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . 175oC Maximum Storage Temperature Range . . . . . . . . . .-65oC to 150oC Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300oC Operating Conditions Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V VINCM 1/2 (V+ - V-) RL 2k CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. JA is measured with the component mounted on an evaluation PC board in free air. TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPLY = 15V, RSOURCE = 100 , RLOAD = 500k, VOUT = 0V, Unless Otherwise Specified. PARAMETER Input Offset Voltage Input Bias Current SYMBOL VIO +IB -IB Input Offset Current Common Mode Range IIO +CMR -CMR Large Signal Voltage Gain +AVOL -AVOL Common Mode Rejection Ratio +CMRR -CMRR CONDITIONS VCM = 0V VCM = 0V, +RS = 100k, -RS = 100 VCM = 0V, +RS = 100, -RS = 100k VCM = 0V, +RS = 100k, -RS = 100k V+ = 5V, V- = -25V V+ = 25V, V- = -5V VOUT = 0V and +10V, RL = 2k VOUT = 0V and -10V, RL = 2k VCM = +10V, V+ = +5V, V- = -25V, VOUT = -10V VCM = -10V, V+ = +25V, V- = -5V, VOUT = +10V HA-2500/883 HA-2502/883 TEMP (oC) MIN MAX MIN MAX UNITS 1 25 -5 5 -8 8 mV 2, 3 125, -55 -8 8 -10 10 mV 1 25 -200 200 -250 250 nA 2, 3 125, -55 -400 400 -500 500 nA 1 25 -200 200 -250 250 nA 2, 3 125, -55 -400 400 -500 500 nA 1 25 -25 25 -50 50 nA 2, 3 125, -55 -50 50 -100 100 nA 1 25 +10 - +10 - V 2, 3 125, -55 +10 - +10 - V 1 25 - -10 - -10 V 2, 3 125, -55 - -10 - -10 V 4 25 20 - 15 - kV/V 5, 6 125, -55 15 - 10 - kV/V 4 25 20 - 15 - kV/V 5, 6 125, -55 15 - 10 - kV/V 1 25 80 - 74 - dB 2, 3 125, -55 80 - 74 - dB 1 25 80 - 74 - dB 2, 3 125, -55 80 - 74 - dB GROUP A SUBGROUPS Spec Number 2 511002-883 HA-2500/883, HA-2502/883 TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued) Device Tested at: VSUPPLY = 15V, RSOURCE = 100 , RLOAD = 500k, VOUT = 0V, Unless Otherwise Specified. PARAMETER Output Voltage Swing SYMBOL +VOUT -VOUT Output Current +IOUT -IOUT Quiescent Power Supply Current +ICC -ICC Power Supply Rejection Ratio +PSRR -PSRR Offset Voltage Adjustment +VIOAdj -VIOAdj CONDITIONS HA-2500/883 HA-2502/883 TEMP (oC) MIN MAX MIN MAX UNITS 4 25 10 - 10 - V 5, 6 125, -55 10 - 10 - V 4 25 - -10 - -10 V 5, 6 125, -55 - -10 - -10 V 4 25 10 - 10 - mA 5, 6 125, -55 7.5 - 7.5 - mA 4 25 - -10 - -10 mA 5, 6 125, -55 - -7.5 - -7.5 mA 1 25 - 6 - 6 mA 2, 3 125, -55 - 6.5 - 7 mA 1 25 -6 - -6 - mA 2, 3 125, -55 -6.5 - -7 - mA 1 25 80 - 74 - dB 2, 3 125, -55 80 - 74 - dB 1 25 80 - 74 - dB 2, 3 125, -55 80 - 74 - dB 1 25 VIO-1 - VIO-1 - mV 2, 3 125, -55 VIO-1 - VIO-1 - mV 1 25 VIO+1 - VIO+1 - mV 2, 3 125, -55 VIO+1 - VIO+1 - mV GROUP A SUBGROUPS RL = 2k RL = 2k VOUT = -10V VOUT = +10V VOUT = 0V, IOUT = 0mA VOUT = 0V, IOUT = 0mA VSUP = 10V, V+ = +20V, V- = -15V, V+ = +10V, V- = -15V VSUP = 10V, V+ = +15V, V- = -20V, V+ = +15V, V- = -10V Note 2 Note 2 NOTE: 2. Offset adjustment range is [VIO (Measured) 1mV] minimum referred to output. This test is for functionality only to assure adjustment through 0V. TABLE 2. ECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPLY = 15V, RSOURCE = 50, RLOAD = 2k, CLOAD = 50pF, AVCL = +1V/V, Unless Otherwise Specified. PARAMETER Slew Rate SYMBOL +SR -SR CONDITIONS VOUT = -5V to +5V 25% +SR 75% VOUT = +5V to -5V 75% -SR 25% HA-2500/883 HA-2502/883 TEMP (oC) MIN MAX MIN MAX UNITS 7 25 25 - 20 - V/s 8A, 8B 125, -55 20 - 15 - V/s 7 25 25 - 20 - V/s 8A, 8B 125, -55 20 - 15 - V/s GROUP A SUBGROUPS Spec Number 3 511002-883 HA-2500/883, HA-2502/883 TABLE 2. ECTRICAL PERFORMANCE CHARACTERISTICS (Continued) Device Tested at: VSUPPLY = 15V, RSOURCE = 50, RLOAD = 2k, CLOAD = 50pF, AVCL = +1V/V, Unless Otherwise Specified. PARAMETER SYMBOL CONDITIONS tr VOUT = 0 to +200mV 10% tr 90% Rise and Fall Time tf Overshoot +OS -OS HA-2500/883 HA-2502/883 TEMP (oC) MIN MAX MIN MAX UNITS 7 25 - 50 - 50 ns 8A, 8B 125, -55 - 60 - 60 ns 7 25 - 50 - 50 ns 8A, 8B 125, -55 - 60 - 60 ns 7 25 - 40 - 50 % 8A, 8B 125, -55 - 50 - 60 % 7 25 - 40 - 50 % 8A, 8B 125, -55 - 50 - 60 % GROUP A SUBGROUPS VOUT = 0 to -200mV 10% tf 90% VOUT = 0 to +200mV VOUT = 0 to -200mV TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS Device Characterized at: VSUPPLY = 15V, RLOAD = 2k, CLOAD = 50pF, Unless Otherwise Specified. PARAMETER Differential Input Resistance SYMBOL RIN CONDITIONS VCM = 0V Full Power Bandwidth FPBW VPEAK = 10V Minimum Closed Loop Stable Gain CLSG RL = 2k, CL = 50pF Quiescent Power Consumption PC VOUT = 0V, IOUT = 0mA HA-2500/883 HA-2502/883 NOTES TEMP (oC) MIN MAX MIN MAX UNITS 3 25 25 - 20 - M 3, 4 25 350 - 300 - kHz 3 -55 to 125 1 - 1 - V/V 3, 5 -55 to 125 - 195 - 210 mW NOTES: 3. Parameters listed in Table 3 are controlled via design or process parameters and are not directly tested at final production. These parameters are lab characterized upon initial design release, or upon design changes. These parameters are guaranteed by characterization based upon data from multiple production runs which reflect lot to lot and within lot variation. 4. Full Power Bandwidth guarantee based on Slew Rate measurement using FPBW = Slew Rate/(2VPEAK). 5. Quiescent Power Consumption based upon Quiescent Supply Current test maximum. (No load on outputs.) TABLE 4. ELECTRICAL TEST REQUIREMENTS MIL-STD-883 TEST REQUIREMENTS SUBGROUPS (SEE TABLES 1 AND 2) Interim Electrical Parameters (Pre Burn-In) 1 Final Electrical Test Parameters 1 (Note 6), 2, 3, 4, 5, 6, 7, 8A, 8B Group A Test Requirements 1, 2, 3, 4, 5, 6, 7, 8A, 8B Groups C and D Endpoints 1 NOTE: 6. PDA applies to Subgroup 1 only. Spec Number 4 511002-883 HA-2500/883, HA-2502/883 Die Characteristics WORST CASE CURRENT DENSITY: DIE DIMENSIONS: 0.3 x 105A/cm2 57 x 65 x 19 milss 1450 x 1650 x 483m SUBSTRATE POTENTIAL (Powered Up): METALLIZATION: Unbiased Type: Al, 1% Cu Thickness: 16kA 2kA TRANSISTOR COUNT: HA-2500/883: 40 HA-2502/883: 40 GLASSIVATION: Type: Nitride (Si3N4) over Silox (SiO2, 5% Phos.) Silox Thickness: 12kA 2kA Nitride Thickness: 3.5kA 1.5kA PROCESS: Bipolar Dielectric Isolation Metallization Mask Layout HA-2500/883, HA-2502/883 +IN -IN BAL COMP V- V+ BAL OUT Spec Number 5 511002-883 HA-2500/883, HA-2502/883 Burn-In Circuits HA7-2500/883 CERDIP 1 R1 8 2 - 3 + D2 C3 6 4 V- V+ 7 D1 C1 5 C2 HA2-2500/883 METAL CAN HA2-2502/883 METAL CAN V+ C3 C1 D1 8 1 7 + 2 6 5 3 4 R1 V- C2 D2 NOTES: R1 = 1M, 5%, 1/4W (Min) C1 = C2 = 0.01F/Socket (Min) or 0.1F/Row (Min) C3 = 0.01F/Socket (10%) D1 = D2 = 1N4002 or Equivalent/Board |(V+) - (V-)| = 30V Spec Number 6 511002-883 HA-2500/883, HA-2502/883 Ceramic Dual-In-Line Frit Seal Packages (CERDIP) c1 F8.3A MIL-STD-1835 GDIP1-T8 (D-4, CONFIGURATION A) LEAD FINISH 8 LEAD CERAMIC DUAL-IN-LINE FRIT SEAL PACKAGE -D- -A- BASE METAL INCHES (c) E b1 M M (b) -Bbbb S C A-B S SECTION A-A D S D BASE PLANE Q -C- SEATING PLANE A L S1 eA A A b2 b ccc M C A-B S e D S eA/2 c aaa M C A - B S D S SYMBOL MIN MAX MIN MAX NOTES A - 0.200 - 5.08 - b 0.014 0.026 0.36 0.66 2 b1 0.014 0.023 0.36 0.58 3 b2 0.045 0.065 1.14 1.65 - b3 0.023 0.045 0.58 1.14 4 c 0.008 0.018 0.20 0.46 2 c1 0.008 0.015 0.20 0.38 3 D - 0.405 - 10.29 5 E 0.220 0.310 5.59 7.87 5 e 0.100 BSC 2.54 BSC - eA 0.300 BSC 7.62 BSC - 3.81 BSC - eA/2 NOTES: 1. Index area: A notch or a pin one identification mark shall be located adjacent to pin one and shall be located within the shaded area shown. The manufacturer's identification shall not be used as a pin one identification mark. MILLIMETERS 0.150 BSC L 0.125 0.200 3.18 5.08 - Q 0.015 0.060 0.38 1.52 6 S1 0.005 - 0.13 - 7 90o 105o 90o 105o - aaa - 0.015 - 0.38 - bbb - 0.030 - 0.76 - 3. Dimensions b1 and c1 apply to lead base metal only. Dimension M applies to lead plating and finish thickness. ccc - 0.010 - 0.25 - M - 0.0015 - 0.038 2, 3 4. Corner leads (1, N, N/2, and N/2+1) may be configured with a partial lead paddle. For this configuration dimension b3 replaces dimension b2. N 2. The maximum limits of lead dimensions b and c or M shall be measured at the centroid of the finished lead surfaces, when solder dip or tin plate lead finish is applied. 8 8 8 Rev. 0 4/94 5. This dimension allows for off-center lid, meniscus, and glass overrun. 6. Dimension Q shall be measured from the seating plane to the base plane. 7. Measure dimension S1 at all four corners. 8. N is the maximum number of terminal positions. 9. Dimensioning and tolerancing per ANSI Y14.5M - 1982. 10. Controlling dimension: INCH. Spec Number 7 511002-883 HA-2500/883, HA-2502/883 Metal Can Packages (Can) T8.C MIL-STD-1835 MACY1-X8 (A1) REFERENCE PLANE A 8 LEAD METAL CAN PACKAGE e1 L L2 L1 INCHES OD2 A A k1 Oe OD OD1 2 N 1 F Ob1 Ob k C L BASE AND SEATING PLANE Q BASE METAL Ob1 LEAD FINISH Ob2 SECTION A-A NOTES: 1. (All leads) Ob applies between L1 and L2. Ob1 applies between L2 and 0.500 from the reference plane. Diameter is uncontrolled in L1 and beyond 0.500 from the reference plane. MILLIMETERS SYMBOL MIN MAX MIN MAX NOTES A 0.165 0.185 4.19 4.70 - Ob 0.016 0.019 0.41 0.48 1 Ob1 0.016 0.021 0.41 0.53 1 Ob2 0.016 0.024 0.41 0.61 - OD 0.335 0.375 8.51 9.40 - OD1 0.305 0.335 7.75 8.51 - OD2 0.110 0.160 2.79 4.06 - e 0.200 BSC 5.08 BSC - e1 0.100 BSC 2.54 BSC - F - 0.040 - 1.02 - k 0.027 0.034 0.69 0.86 - k1 0.027 0.045 0.69 1.14 2 L 0.500 0.750 12.70 19.05 1 L1 - 0.050 - 1.27 1 L2 0.250 - 6.35 - 1 Q 0.010 0.045 0.25 1.14 - 45o BSC 45o BSC 45o BSC 45o BSC 3 N 8 8 4 2. Measured from maximum diameter of the product. 3 Rev. 0 5/18/94 3. is the basic spacing from the centerline of the tab to terminal 1 and is the basic spacing of each lead or lead position (N -1 places) from , looking at the bottom of the package. 4. N is the maximum number of terminal positions. 5. Dimensioning and tolerancing per ANSI Y14.5M - 1982. 6. Controlling dimension: INCH. All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (321) 724-7000 FAX: (321) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 ASIA Intersil (Taiwan) Ltd. Taiwan Limited 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029 Spec Number 8 511002-883