AMC78L05DMT - ADD Microtech Inc.

AMC DOC. #: AMC78L05_C

November 2002

Copyright  2002, ADD Mic rotec h Corp . 1 www.add mtek.com

DESCRIPTION FEATURES

The AMC78L05 is a 3-terminal positive regulator with a

fixed output voltage of 5V. Although it is designed as a

fixed-voltage regulator, the output voltage can be

increased by the use of a simple voltage divider. This

regulator can provide local on card regulation,

eliminating the distribution problems associated with

single point regulation. In addition, it can be used with

power-pass elements to make high-current voltage

regulators with 100mA output current.

Protection features such as thermal shutdown and current

limiting have been designed internally which will protect

the device from damage in case of overload or

overheating.

! ±

±±

±5% tolerance of output voltage

! Wide input range

! Output current > 100mA

! Internal thermal overload protection

! No External Components

" Short circuit protection

" Available in 3L plastic TO-92, surface

mount SOT-89 and plastic 8 pin S.O.I.C.

" Identical pin assignment to earlier 78L05

series.

APPLICATIONS PACKAGE PIN OUT

3-Pin Plastic TO-92

(Top View)

! Logic Systems

! Computer Add-On Cards

! Monitors

! Power Suppliers

8-Pin S.O.I.C

Surface Mount

(Top View)

ORDER INFORMATION

TO-92 SO-8 SOT-89

TA (OC) LP 3-pin DM 8-pin PK 3-pin

0 to 70 AMC78L05LP AMC78L05DM AMC78L05PK

Note: 1. All surface-mount and TO-92 packages are available in Tape & Reel. Append the letter “T” to part

number (i.e. AMC78L05LPT, AMC78L05DMT or AMC78L05PKT).

2. For TO-92 in Tape & Box (without reel), add suffix “TB” (i.e. AMC78L05LPTB)

AMC78L05

100mA / 3-TERMINAL

5V REGULATOR

INPUT



A

AA

ADD MICROTECH CORP.

INPUT

GND

OUTPUT

GND

OUTPUT

3-Pin Plastic SOT-89

Surface Mount

(

TOP View

)

GND

Output

GND

INPUT

GND

NC NC

AMC DOC. #: AMC78L05_C AMC78L05

November 2002 100mA / 3-TERMINAL 5V REGULATOR

Copyright  2002, ADD Mic rotec h Corp . 2 www.add mtek.com

ABSOLUTE MAXIMUM RATINGS (Note 1)

Input Voltage 30V

Maximum junct ion operating temperat ure, TJ 150 OC

Storage temperature range -65OC to 150OC

Lead temperature (soldiering, 10 seconds) 260 OC

Note 1: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground.

Currents are positive into, negative out of the specified terminal.

POWER DISSIPATION TABLE

Package θJA

( OC/W ) Derating factor ( mW/OC )

TA ≥ 25 OC TA ≤ 25 OC

Power rating(mW) TA=70 OC

Power rating(mW) TA= 85 OC

Power rating (mW)

DM 165 6.06 757 485 394

LP 156 6.41 801 513 417

PK 71(note) 14.1 1763 1128 916

Note :

1. For PK package, Thermal Resistance-Junction to Tab ( θJT ) = 35 OC/W. TJ = TTAB + (PD × θJT).

PD: Power Dissipation.

2. θJA: Thermal Resistance-Junction to Ambient

Junct ion Temper ature Calcula t ion: TJ = TA + (P D × θJA).

The θJA numbers are guidelines for the thermal performance of the device/PC-board system.

All of the above assume no ambient airflow.

RECOMMENDED OPERATING CONDITIONS

Recommended Operating Conditions

Parameter Symbol Min. Typ. Max. Units

Input Voltage VI 7 20 V

Output Current IOUT 100 mA

Ope rating Virtua l Junct ion Temperature TJ 0 125

OC

AMC DOC. #: AMC78L05_C AMC78L05

November 2002 100mA / 3-TERMINAL 5V REGULATOR

Copyright  2002, ADD Mic rotec h Corp . 3 www.add mtek.com

ELECTRICAL CHARACTERISTICS

Unless otherwise specified, these specifications in bold type apply over the operating temperature range of

0OC ≤ TJ ≤ +150OC, VIN = 10V, IOUT = 40mA,CIN = 0.33µF, COUT= 0.1µF, and are for DC characteristics only. (Low

duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient

temperature.)

AMC78L05

Parameter Symbol Test Co nd itions Min. Typ. Max. Units

TJ = 25 OC 4.8 5.0 5.2

7V ≤ VIN ≤ 20V, 1mA ≤ IOUT ≤ 40mA 4.75 5.25

Output Voltage VOUT

1mA ≤ IOUT ≤ 70mA 4.75 5.25 V

7V ≤ VIN ≤ 20V,TJ = 25 OC 18 75

Line Regul ation VOI 8V ≤ VIN ≤ 20V,TJ = 25 OC 10 54 mV

1mA ≤ IOUT ≤ 100mA, TJ = 25 OC 20 60

Load Regulation VOL 1mA ≤ IOUT ≤ 40mA, TJ = 25 OC 5 30 mV

Peak Output Curre nt IPEAK TJ = 25 OC 140 mA

Dropout Voltage TJ = 25 OC 1.7 2.0 V

Quiescent Current IQ 3 5 mA

Ripple Rejection ( note 1 ) RR f =120Hz, 8V ≤ VIN ≤ 16V, TJ = 25 OC 47 62 dB

Output Noise Voltage ( note 1 ) VO RMS 10Hz ≤ f ≤ 100KHz, TJ = 25 OC 40 µV

Note 1: These paramete rs, although guaranteed, are not 100% tested in production prior to shipment.

AMC DOC. #: AMC78L05_C AMC78L05

November 2002 100mA / 3-TERMINAL 5V REGULATOR

Copyright  2002, ADD Mic rotec h Corp . 4 www.add mtek.com

Typical Applications

Fig. 1. Fixed Output Regulator – capacitors are required if

the regulator is far away from the power supply filter.

Fig. 2. Adjustable Output Regulator –

VOUT = 5V + (5V/R1 +I Q)R2

Fig. 3. Current Regulator:

IOUT = (VOUT /R1) + IQ

INPUT AMC78L05

0.33µ

µµ

µF 0.1µ

µµ

µF

OUTPUT INPUT AMC78L05

0.33µ

µµ

µF 0.1µ

µµ

µF

OUTPUT

IQ R1

R2

INPUT AMC78L05

0.33µ

µµ

µF OUTPUT

R1

IOUT

AMC DOC. #: AMC78L05_C AMC78L05

November 2002 100mA / 3-TERMINAL 5V REGULATOR

Copyright  2002, ADD Mic rotec h Corp . 5 www.add mtek.com

Note: For TO-92 in tape and reel, refer to TO-92 package

and carrier dimension data for lead dimensions.

3-Pin Plastic TO-92

INCHES MILLIMETERS

MIN TYP MAX MIN TYP MAX

A 0.175 0.180 0.205 4.45 4.57 5.21

B 0.170 0.180 0.210 4.32 4.57 5.33

C 0.125 0.142 0.165 3.18 3.62 4.19

F - 0.015 - - 0.38 -

G - 0.050 - - 1.27 -

J - 0.150 - - 3.81 -

K 0.500 0.580 - 12.70 14.73 -

M - 5º - - 5º -

N - 5º - - 5º -

3-Pin Plastic TO-92 Package (Taped and Reeled) and Carrier Dimensions

INCHES MILLIMETERS

MIN TYP MAX MIN TYP MAX

C 0.079 - - 2.00 - -

P 0.480 0.500 0.520 12.2 12.7 13.2

Po 0.488 0.500 0.512 12.4 12.7 13.0

Do 0.150 0.157 0.165 3.8 4.0 4.2

P1 0.230 0.250 0.256 5.85 6.35 6.85

Fo 0.165 0.197 0.220 4.2 5.0 5.6

W 0.669 0.709 0.748 17.0 18.0 19.0

Ho 0.610 0.630 0.649 15.5 16.0 16.5

Wo 0.224 0.236 0.248 5.7 6.0 6.3

W1 0.335 0.354 0.374 8.5 9.0 9.5

Po

C

F1

Fo

Do

Wo

W1

P1 P

Ho

W

Note: For 3L TO92, 2,000 units per Reel

A

BK

FG

N

C

M

AMC DOC. #: AMC78L05_C AMC78L05

November 2002 100mA / 3-TERMINAL 5V REGULATOR

8-Pin Plastic S.O.I.C.

INCHES MILLIMETERS

MIN TYP MAX MIN TYP MAX

A 0.183 - 0.202 4.65 - 5.13

B 0.144 - 0.163 3.66 - 4.14

C 0.068 - 0.074 1.73 - 1.88

D 0.010 - 0.020 0.25 - 0.51

F 0.015 - 0.035 0.38 - 0.89

G 0.050 BSC 1.27 BSC

J 0.007 - 0.010 0.19 - 0.25

K 0.005 - 0.010 0.13 - 0.25

L 0.189 - 0.205 4.80 - 5.21

M - - 8º - - 8º

P 0.228 - 0.244 5.79 - 6.20

SEATING PLAN

A

D

F

P

B

K

C

M

L

J

G

Note: for 8 pin S.O.I.C., 100 units per tube

3-Pin Surface Mount SOT-89

INCHES MILLIMETERS

MIN TYP MAX MIN TYP MAX

A 0.173 - 0.181 4.39 - 4.59

B 0.090 - 0.102 2.28 - 2.59

C 0.055 - 0.063 1.39 - 1.60

D 0.015 - 0.017 0.38 - 0.43

E 0.084 - 0.090 2.13 - 2.28

F 0.016 - 0.019 0.33 - 0.48

G 0.059 BSC 1.49 BSC

H 0.118 BSC 2.99 BSC

J 0.018 - 0.022 0.45 - 0.55

K 0.155 - 0.167 3.94 - 4.24

L 0.067 - 0.072 1.70 - 1.82

M 0° - 8° 0° - 8°

M

B

A

L

K

N

H

J

F

G

E

D

C

N 0.035 - 0.047 0.89 - 1.19

AMC DOC. #: AMC78L05_C AMC78L05

November 2002 100mA / 3-TERMINAL 5V REGULATOR

IMPORTANT NOTICE

ADD Microtech (ADDM) reserves the right to make changes to its products or to discontinue any integrated circuit

product or service without notice, and advises its customers to obtain the latest version of relevant information to

verify, before placing orders, that the information being relied on is current.

A few applications using integrated circuit products may involve potential risks of death, personal injury, or severe

property or environmental damage. ADDM integrated circuit products are not designed, intended, authorized, or

warranted to be suitable for use in life-support applications, devices or systems or other critical applications. Use of

ADDM products in such applications is understood to be fully at the risk of the customer. In order to minimize

risks associated with the customer’s applications, the customer should provide adequate design and operating

safeguards.

ADDM assumes to no liability to customer product design or application support. ADDM warrants the performance

of its products to the specifications applicable at the time of sale.

U.S. Asia Pacific region

ADD Microtech Inc.

492 Altamont Drive

Milpitas, CA 95035

ADD Microtech Corp

3F, 132, Sec. 4, Chung Hsiao E. Rd.,

Taipei, Taiwan

TEL: (408) 9410420 TEL: 2-27760166

FAX: (408) 9410864 FAX: 2-27764208