T-13/4 (5 mm) Diffused LED
Lamps
Technical Data
Features
• High Intensity
• Choice of 4 Bright Colors
High Efficiency Red
Orange
Yellow
High Performance Green
• Popular T-13/4 Diameter
Package
• Selected Minimum
Intensities
• Wide Viewing Angle
• General Purpose Leads
• Reliable and Rugged
• Available on Tape and Reel
Description
This family of T-13/4 tinted,
diffused LED lamps is widely used
in general purpose indicator
applications. Diffusants, tints, and
optical design are balanced to
yield superior light output and
wide viewing angles. Several
intensity choices are available in
each color for increased design
flexibility.
HLMP-3301
HLMP-3401
HLMP-3507
HLMP-3762
HLMP-3862
HLMP-3962
HLMP-D401
Selection Guide
Luminous Intensity Iv (mcd) at 10 mA
Material/Color Part Number Min. Max.
HLMP-3301 5.4 –
HLMP-3301-D00xx 2.1 –
HLMP-3301-F00xx 5.4 –
HLMP-3301-FG0xx 5.4 17.2
HLMP-3762 8.6 –
HLMP-3762-G00xx 8.6 –
HLMP-3401 5.7 –
HLMP-3401-E00xx 5.7 –
HLMP-3401-EF0xx 5.7 18.4
HLMP-3401-EFBxx 5.7 18.4
HLMP-3862 9.2 –
HLMP-3862-F00xx 9.2 –
HLMP-3862-FGBxx 9.2 29.4
HLMP-D401 5.4 –
HLMP-D401-D00xx 2.1 –
HLMP-D401-EF0xx 3.4 10.8
HLMP-D401-F00xx 5.4 –
HLMP-3507 4.2 –
HLMP-3507-D00xx 4.2 –
HLMP-3507-EF0xx 6.7 21.2
HLMP-3962 10.6 –
HLMP-3962-F00xx 10.6 –
GaP HER
GaP Yellow
GaP Orange
GaP Green
2
Package Dimensions
Part Numbering System
HLMP - x x xx - x x x xx
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
B1: Right Angle Housing, Uneven Leads
B2: Right Angle Housing, Even Leads
DD: Ammo Pack
R4: Tape & Reel, Counter Clockwise
Color Bin Options
0: Full Color Bin Distribution
B: Color Bins 2 & 3 only
Maximum Iv Bin Options
0: Open (no max. limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Brightness Level
0x: Less Brightness
62: Higher Brightness
Color Options
3,7: GaP HER
4,8: GaP Yellow (except D4xx)
5,9: GaP Green
Package Options
3: T-1 3/4 (5 mm)
D: T-1 3/4 (5 mm) GaP Orange
3
Optical/Electrical Characteristics at TA = 25°C
Test
Symbol Parameter Color Min. Typ. Max. Units Condition
2θ1/2Included Angle High Efficiency Red 60 Deg. IF = 10 mA
Between Half Orange 60 See Note 1
Luminous Intensity Yellow 60
Points Green 60
λPEAK Peak Wavelength High Efficiency Red 635 nm Measurement
Orange 600 at Peak
Yellow 583
Green 565
∆λ1/2 Spectral Line Halfwidth HER/Orange 40 nm
Yellow 36
Green 28
λdDominant Wavelength High Efficiency Red 626 nm See Note 2
Orange 602
Yellow 585
Green 569
τsSpeed of Response High Efficiency Red 90 ns
Orange 280
Yellow 90
Green 500
C Capacitance High Efficiency Red 11 pF VF = 0;
Orange 4 f = 1 MHz
Yellow 15
Green 18
RθJ-PIN Thermal Resistance All 260 °C/W Junction to
Cathode Lead
VFForward Voltage HER/Orange 1.9 2.4 V IF = 10 mA
Yellow 2.0 2.4
Green 2.1 2.7
VRReverse Breakdown All 5.0 V IR = 100 µA
Voltage
ηVLuminous Efficacy High Efficiency Red – 145 lumens See Note 3
Orange 380 Watt
Yellow – 500
Green 595
Notes:
1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
3. Radiant intensity, Ie, in Watts/steradian, may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and
ηv is the luminous efficacy in lumens/Watt.
4
Absolute Maximum Ratings at TA = 25°C
Green/
Parameter HER/Orange Yellow Emerald Green Units
Peak Forward Current 90 60 90 mA
Average Forward Current[1] 25 20 25 mA
DC Current[2] 30 20 30 mA
Power Dissipation[3] 135 85 135 mW
Reverse Voltage (IR = 100 µA) 5 5 5 V
Transient Forward Current[4] 500 500 500 mA
(10 µsec Pulse)
LED Junction Temperature 110 110 110 °C
Operating Temperature Range -55 to +100 -55 to +100 -20 to +100 °C
Storage Temperature Range -55 to +100
Lead Soldering Temperature 260°C for 5 seconds
[1.6 mm (0.063 in.) from body]
Notes:
1. See Figure 5 (Red/Orange), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions.
2. For Red, Orange and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C.
3. 1.8 mW/°C. For Yellow series derate power linearly from 50°C at 1.6 mW/°C.
4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED
die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the
Absolute Maximum Ratings.
Figure 1. Relative Intensity vs. Wavelength.
ORANGE
HIGH EFFICIENCY RED
WAVELENGTH – nm
RELATIVE INTENSITY
1.0
0.5
0
500 550 600 650 700
YELLOW
EMERALD GREEN T = 25° C
A
GREEN
5
T-13/4 High Efficiency Red, Orange Diffused Lamps
Figure 3. Relative Luminous Intensity
vs. DC Forward Current.
Figure 2. Forward Current vs.
Forward Voltage Characteristics. Figure 4. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak LED Current.
Figure 5. Maximum Tolerable Peak
Current vs. Pulse Duration. (IDC MAX
as per MAX Ratings).
Figure 6. Relative Luminous Intensity vs. Angular Displacement.
6
T-13/4 Yellow Diffused Lamps
Figure 8. Relative Luminous Intensity
vs. Forward Current.
Figure 7. Forward Current vs.
Forward Voltage Characteristics. Figure 9. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak Current.
Figure 10. Maximum Tolerable Peak
Current vs. Pulse Duration. (IDC MAX
as per MAX Ratings).
Figure 11. Relative Luminous Intensity vs. Angular Displacement.
7
T-13/4 Green/Emerald Green Diffused Lamps
Figure 15. Maximum Tolerable Peak
Current vs. Pulse Duration. (IDC MAX
as per MAX Ratings).
Figure 16. Relative Luminous Intensity vs. Angular Displacement.
I – PEAK CURRENT PER LED – mA
PEAK
1.7
1.5
1.4
1.3
0.7 10 30 50
1.6
02040
RELATIVE EFFICIENCY
1.2
1.1
1.0
0.9
0.8
60 70 80 90 100
EMERALD GREEN
GREEN
Figure 12. Forward Current vs.
Forward Voltage Characteristics. Figure 13. Relative Luminous
Intensity vs. DC Forward Current. Figure 14. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak LED Current.
8
Intensity Bin Limits
Intensity Range (mcd)
Color Bin Min. Max.
D 2.4 3.8
E 3.8 6.1
F 6.1 9.7
G 9.7 15.5
H 15.5 24.8
I 24.8 39.6
J 39.6 63.4
K 63.4 101.5
L 101.5 162.4
M 162.4 234.6
N 234.6 340.0
Red/Orange O 340.0 540.0
P 540.0 850.0
Q 850.0 1200.0
R 1200.0 1700.0
S 1700.0 2400.0
T 2400.0 3400.0
U 3400.0 4900.0
V 4900.0 7100.0
W 7100.0 10200.0
X 10200.0 14800.0
Y 14800.0 21400.0
Z 21400.0 30900.0
E 6.5 10.3
F 10.3 16.6
G 16.6 26.5
H 26.5 42.3
I 42.3 67.7
J 67.7 108.2
K 108.2 173.2
L 173.2 250.0
M 250.0 360.0
Yellow N 360.0 510.0
O 510.0 800.0
P 800.0 1250.0
Q 1250.0 1800.0
R 1800.0 2900.0
S 2900.0 4700.0
T 4700.0 7200.0
U 7200.0 11700.0
V 11700.0 18000.0
W 18000.0 27000.0
9
Intensity Bin Limits, continued
Intensity Range (mcd)
Color Bin Min. Max.
D 4.7 7.6
E 7.6 12.0
F 12.0 19.1
G 19.1 30.7
H 30.7 49.1
I 49.1 78.5
J 78.5 125.7
K 125.7 201.1
L 201.1 289.0
Green M 289.0 417.0
N 417.0 680.0
O 680.0 1100.0
P 1100.0 1800.0
Q 1800.0 2700.0
R 2700.0 4300.0
S 4300.0 6800.0
T 6800.0 10800.0
U 10800.0 16000.0
V 16000.0 25000.0
W 25000.0 40000.0
Maximum tolerance for each bin limit is ±18%.
Tolerance for each bin limit is ±0.5 nm.
Color Categories
Lambda (nm)
Color Category # Min. Max.
6 561.5 564.5
5 564.5 567.5
Green 4 567.5 570.5
3 570.5 573.5
2 573.5 576.5
1 582.0 584.5
3 584.5 587.0
Yellow 2 587.0 589.5
4 589.5 592.0
5 592.0 593.0
1 597.0 599.5
2 599.5 602.0
3 602.0 604.5
Orange 4 604.5 607.5
5 607.5 610.5
6 610.5 613.5
7 613.5 616.5
8 616.5 619.5
Mechanical Option Matrix
Mechanical Option Code Definition
00 Bulk Packaging, minimum increment 500 pcs/bag
01 Tape & Reel, crimped leads, minimum increment 1300 pcs/bag
02 Tape & Reel, straight leads, minimum increment 1300 pcs/bag
B1 Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
B2 Right Angle Housing, even leads, minimum increment 500 pcs/bag
DD Ammo Pack, straight leads with minimum increment 2K/pack
R4 Tape & Reel, straight leads, counter clockwise, anode lead leaving the reel first
10
Note:
All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent
representative for further clarification/information.
www.semiconductor.agilent.com
Data subject to change.
Copyright © 2001 Agilent Technologies, Inc.
March 21, 2001
Obsoletes 5968-4161E (2/99)
5988-1857EN
