1
www.apem.com
Q SERIES Ø14mm (.551") Panel Mount LED Indicators
Distinctive features and specification
Features
• 14mm panel mounting LED indicator
• 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs
•
•
Prominent recessed and flush bezel styles
•
2VDC – 220VAC•
(2.8 x 0.8) solder lug/Faston terminals, pins or (200mm long) wire terminations•
IP67 sealing option (EN60529)•
Supplied with fixing nut and spring washer
NB: UL Recognized Component
PANEL CUTOUT
Ø 14.00 +0.15/-0.0
Standard LED Intensity Prominent and Recessed
Prominent and Recessed
Prominent and Recessed
Flush Forward Voltage
HE Red 80mcd 10mcd 2.0V
Green 60mcd 5mcd 2.2V
Yellow 50mcd 4mcd 2.1V
Blue 540mcd 100mcd 3.3V
White 1000mcd 150mcd 3.3V
Orange 80mcd 200mcd 2.0V
Bi-color (Typical) (Red/Green) 15/15mcd 14/10mcd 2.0V/2.2V
Tri-color (Typical) (Red/Green/Yellow) 60/50/50mcd 15/10/30mcd 2.0V/2.2V/2.1V
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.
Super Bright LED Flush Forward Voltage
HE Red 17,000mcd 2,000mcd 2.2V
Green 11,000mcd 680mcd 3.5V
Yellow 4,000mcd 350mcd 2.3V
Blue 2,500mcd 250mcd 3.3V
White 4,400mcd 250mcd 3.3V
Orange 2800mcd 300mcd 2.1V
Hyper Bright LED Flush Forward Voltage
HE Red 2,800mcd 800mcd 2.1V
Green 2,200mcd 250mcd 3.2V
Yellow 1,300mcd 250mcd 2.0V
Orange
850mcd
200mcd 2.1V
Luminous intensity will be reduced with lower operating current.
Max Reverse Voltage: 5V
Viewing Angle: 30–100° (dependant on model)
Life Expectancy: 100,000 hours
Temperature Range: –40 to +85°C
TECHNICAL SPECIFICATIONS
Voltage Operating Voltage Operating Current
(Min to Max) (Typical All Types)
02 (No Resistor) 1.8 to 3.3VDC 20mA max*
6VDC 5.4 to 6.6VDC 20mA
12VDC 10.8 to 13.2VDC 20mA
24VDC 21.6 to 26.4VDC 20mA
28VDC 25.2 to 30.8VDC 20mA
110VAC 99 to 121VAC 6mA
220VAC 207 to 253VAC 3mA
Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
The company reserves the right to change specifications without notice.
* Customer to supply resistor for desired operating current.
Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
Luminous intensities and color shades of white LEDs may vary within a batch.
LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal.
Torque: 75cNm
Plated brass bezel finished in bright chrome,
black chrome or satin grey and moulded polycarbonate rear body
(operating & storage)
Custom engraving available
•
APEM
Q14_VOY1609R2US
17,00 0,669 AF 3,00 0,118
M14 x 1,0 THREAD
2www.apem.com
Q SERIES Ø14mm (.551") Panel Mount LED Indicators
Technical Drawings
PROMINENT BEZEL
FLUSH BEZEL
REAR EPOXY PINS
REAR EPOXY PINS
PINS
PINS
SHORT BODY WIRES
SHORT BODY WIRES
SHORT BODY PINS
SHORT BODY PINS
REAR EPOXY WIRES
REAR EPOXY WIRES
WIRES
WIRES
SOLDER LUG/FASTONS
SOLDER LUG/FASTONS
APEM
2,8x0,8[0,11x0,031]M14x1,0
33,75 1,329
9,35 0,368
10,00 0,3944,75 0,187
13,50 0,531
16,00
0,630
M14x1,0
16,00
0,630
4,75 0,187
13,50 0,531
28,75 1,132
1,25 0,049
1,25 0,049
5,50 0,217
7,00 0,276
0,50 0,020
28,75 1,132
4,75 0,187
13,50 0,531
M14x1,0
16,00
0,630
200,0+/-10
[7,874+/-0,393]
16,00
0,630
4,75 0,187
13,50 0,531
17,50 0,689
18,25 0,719
16,75 0,659
0,50 0,020
1,25 0,049
1,25 0,049
M14x1,0
16,00
0,630
4,75 0,187
13,50 0,532
17,50 0,689
M14x1,0
200,0+/-10
[7,874+/-0,393]
19,75 0,778
4,75 0,187
14,50 0,571
16,00 0,630
1,25 0,049
1,25 0,049
M14x1,0
13,50 0,531
16,00
0,630
0,50 0,020
M14x1,0
19,75 0,778
4,75 0,187
13,50 0,531
16,00
0,630
200,0+/-10
[7,874+/-0,393]
34,10 1,343
1,50 0,059
9,35 0,368
10,00 0,394
M14x1,0 2,8x0,8[0,11x0,031]
13,5[0,531]
16,00
0,630
16,00
0,630
1,50 0,059
5,50 0,217
7,00 0,276
1,25 0,049
1,25 0,049
M14x1,0
0,50 0,020
13,50[0,531]
29,10 1,146
M14x1,0
29,10 1,146
16,00
0,630
1,50 0,059
13,50[0,531]
200,0+/-10
[7,874+/-0,393]
16,00
0,630
1,50 0,059
13,50[0,531]
17,85 0,703
18,25 0,719
16,75 0,659
0,50 0,020
1,25 0,049
1,25 0,049
M14x1,0
16,00
0,630
1,50 0,059
13,50[0,531]
17,85 0,703
M14x1,0
200,0+/-10
[7,874+/-0,393]
20,10 0,791
14,50 0,571
16,00 ,6301,50 0,059
16,00
0,630
1,25 0,049
1,25 0,049
13,50[0,531]
0,50 0,020
20,10 0,791
1,50 0,059
M14x1,0
13,50[0,531]
16,00
0,630
200,0+/-10
[7,874+/-0,393]
3
www.apem.com
Q SERIES Ø14mm (.551") Panel Mount LED Indicators
Technical Drawings
RECESSED BEZEL
EPOXY PINS
PINS
SHORT BODY WIRES
SHORT BODY
PINS
REAR EPOXY WIRES
WIRES
SOLDER LUG/FASTONS
APEM
16,00
0,630
5,00 0,197
13,50 0,531
33,75 1,329
9,35 0,368
10,00 0,394
M14x1,0
2,8x0,8[0,11x0,031]
16,00
0,630
5,00 0,197
13,50 0,531
28,75 1,132
200,00+/-10
[7,874+/-0,393
M14x1,0
16,00
0,630
5,00 0,197
13,50 0,531
28,75 1,132
7,00 0,276
5,50 0,217
0,50 0,020 SQ
1,25 0,049
2,50 0,098
M14x1,0
16,00
0,630
5,00 0,197
13,50 0,531
17,50 0,689
16,75 0,659
18,25 0,719
0,50 0,020 SQ
2,50 0,098
1,25 0,049
M14x1,0
16,00
0,630
17,50 0,689
5,00 0,197
200,00+/-10
[7,874+/-0,393]
13,50 0,531
M14x1,0
16,00
0,630
5,00 0,197
13,50 0,531
19,75 0,778
14,50 0,571
16,00 0,630
0,50 0,020 SQ
1,25 0,049
2,50 0,098
M14x1,0
16,00
0,630
5,00 0,197
13,50 0,531
19,75 0,778
200,00+/-10
[7,874+/-0,393]
M14x1,0
4www.apem.com
Q SERIES Ø14mm (.551") Panel Mount LED Indicators
Custom options
CUSTOM MARKING
Code Symbol Description
Code Symbol Description Code Symbol Description
-0AJ High Beam
-097 Low Beam
-027 Rear Fog
-026 Front Fog
-021 Windscreen
Wiper
-022 Windscreen
Washer
-023 Ventilator
Fan
-0AH Turn
Signal
-098 Side Lights
-041 Horn
-013 Hazard
Warning
-018 Heating
-0BU Brake Test
-0K6 Arrow
-0AG Battery
-0GP Oil Can
-020 Windscreen
Heating
-086 ABS
-0EL Engine
Coil
-0SB Seat Belt
-0UB USB
Connection
-0ST Steam
-0EU ECU
-0AD Side Step
-012 Air Con
-040 Engine
-0BR Boot/Trunk
Release
Suffix the part number with legend code.
APEM
Cable length & connector
For custom cable length and
connectors please contact
APEM
Some common codes are listed above, for your custom requirements please contact APEM.
Unless specified, standard engraving with white infill will be supplied.
CUSTOM ENGRAVING
5
www.apem.com
Q SERIES Ø14mm (.551") Panel Mount LED Indicators
Order Overview
STANDARD OPTIONS
Q 14 P 1 C XX B 28 E
• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, 22AWG UL1007, red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
• For LEDs with alternative voltages consult APEM
• Bi-color LEDs, by connecting the gold Faston (+) one color is produced,
by reversing the supply voltage another color is produced – Bi-colors are available up to 28VDC
• Take care when soldering to the Faston terminals (recommended solder temperature 300°C - 3 sec)
• Short body pins and wires are only available up to 28VDC
• The Tri-color LED has red and green LEDs when both are connected yellow is produced
• Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-)
• Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode
• Tri-color pins are center (–) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red
• Maximum panel thickness 11mm
• We recommend using Hyper bright LEDs for use at 110VAC and 220VAC
•
For multi-voltage options please consult APEM
Q
Example Q14F5ABXXB12E
Ø14mm, Flush bezel, wire termination, blue LED
anodized blue finish, fixed light,
12VDC LED, IP67 panel sealed,
1 = Solder Lug/
Fastons
(2.8 x 0.8)
2 = Pins
3 = Wires
4 = Rear epoxy
Pins
5 = Rear epoxy
Wires
6 = Short body
Pins
7 = Short body
Wires
C = Bright Chrome
B = Black Chrome
G = Satin Grey
R = Red
G = Green
Y = Yellow
B = Blue
W = White
O = Orange
HR = Hyper Bright Red
HG = Hyper Bright Green
HY = Hyper Bright Yellow
HO = Hyper Bright Orange
SR = Super Bright Red
SG = Super Bright Green
SY = Super Bright Yellow
SB = Super Bright Blue
SW = Super Bright White
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
RYG = Red/Yellow/Green
02 = no resistor*
06 = 6VDC
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
28 = 28VDC
28A = 28VAC/DC
110 = 110VAC
220 = 220VAC
(Blank) = Unsealed
E = IP67
XX = Fixed Light
KK = Flashing Light
(12- 28VDC)
YY = Bi-color
ZZ = Tri-color
SERIES MOUNTING
HOLE
14 = Ø14mm P = Prominent
F = Flush
R = Recessed
BEZEL
STYLE TERMINALS BEZEL FINISH TYPE OF
ILLUMINATION LED COLOR VOLTAGE SEALING
The Q14 Series is available with a range of standard options, to specify your LED, simply choose one option from each
column. An example is shown below.
Anodised Flush
AR = Red
AG = Green
AY = Yellow
AB = Blue
AN = Black
* = For resistorless versions (02) please refer to the forward voltage on page 1
APEM
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Apem:
Q14P1CKKR12 Q14P1CXXSB12 Q14P1CXXSG12 Q14P1CXXSR12 Q14P1CXXSY12 Q14P1CXXG110
Q14P1CXXG12 Q14P1CXXR110 Q14P1CXXR12 Q14P1CXXY110 Q14P1CXXY12 Q14P7BXXSG12E
Q14P7BXXSW12E Q14P1CZZRYG02E Q14P1CXXY24E Q14P1CXXG12E Q14P1CXXR12E Q14P1CXXG24E
Q14P1CXXY12E Q14P1CZZRYG24E Q14P1CXXR24E Q14P1CZZRYG12E Q14F1BXXB110E Q14F1BXXB12E
Q14F1BXXG110E Q14F1BXXG12E Q14F1BXXG24E Q14F1BXXR110E Q14F1BXXR12E Q14F1BXXR24E
Q14F1BXXW110E Q14F1BXXW12E Q14F1BXXW24E Q14F1BXXY110E Q14F1BXXY12E Q14F1BXXY24E
Q14F1CXXB110E Q14F1CXXB12E Q14F1CXXG110E Q14F1CXXG12E Q14F1CXXG24E Q14F1CXXR110E
Q14F1CXXR12E Q14F1CXXR24E Q14F1CXXW110E Q14F1CXXW12E Q14F1CXXW24E Q14F1CXXY110E
Q14F1CXXY12E Q14F1CXXY24E Q14P1BXXB110E Q14P1BXXB12E Q14P1BXXG110E Q14P1BXXG12E
Q14P1BXXG24E Q14P1BXXR110E Q14P1BXXR12E Q14P1BXXR24E Q14P1BXXW110E Q14P1BXXW12E
Q14P1BXXW24E Q14P1BXXY110E Q14P1BXXY12E Q14P1BXXY24E Q14P1BZZRYG12E Q14P1BZZRYG24E
Q14P1CXXB110E Q14P1CXXB12E Q14P1CXXG110E Q14P1CXXR110E Q14P1CXXW110E Q14P1CXXW12E
Q14P1CXXW24E Q14P1CXXY110E Q14F1BXXB24E Q14F1CXXB24E Q14P1BXXB24E Q14P1CXXB24E
Q14F7CXXG12E Q14P1CKKR24E Q14P3CXXSR12E Q14P1GXXSY24E Q14P1CXXR28E Q14P1CXXG28E
Q14F3CXXG12E Q14P1CXXB28E Q14F3BXXB24E Q14P3CXXG12E Q14F3BXXG24E Q14F3BXXG12E
Q14F3BXXR24E Q14F3CXXR24E Q14P3BXXB12E Q14F3BZZRYG12E Q14P1CXXG06E Q14P1CXXG220E
Q14P7CZZRYG02E Q14P1CXXG02E Q14P7CZZRYG06E Q14P3CZZRYG12E
