STPS340U/S/B POWER SCHOTTKY RECTIFIER MAIN PRODUCT CHARACTERISTICS IF(AV) 3A VRRM 40 V Tj (max) 150 C VF (max) 0.57 V K A VERY SMALL CONDUCTION LOSSES NEGLIGIBLE SWITCHING LOSSES LOW FORWARD VOLTAGE DROP LOW THERMAL RESISTANCE EXTREMELY FAST SWITCHING SURFACE MOUNTED DEVICE NC DPAK STPS340B DESCRIPTION Single chip Schottky rectifier suited for Switch Mode Power Supplies and high frequency DC to DC converters. Packaged in SMB, SMC and DPAK this device is intended for use in low and medium voltage operation, high frequency inverters, free wheeling and polarity protection applications where low switching losses are required. SMB STPS340U SMC STPS340S ABSOLUTE RATINGS (limiting values) Symbol VRRM IF(RMS) IF(AV) Parameter Repetitive peak reverse voltage RMS forward current Average forward current DPAK SMB / SMC Tc = 135C = 0.5 DPAK TL = 105C = 0.5 SMB / SMC Value 40 Unit V 6 A 10 A IFSM Surge non repetitive forward current tp = 10 ms Sinusoidal 3 75 A IRRM Peak repetitive reverse current Storage temperature range tp = 2 s F = 1kHz square 1 A - 65 to + 150 + 150 C C 10000 V/s Tstg Tj Maximum operating junction temperature dV/dt Critical rate of rise of reverse voltage November 1998 Ed:5A 1/7 STPS340U/S/B THERMAL RESISTANCES Symbol Rth (j-l) Rth (j-c) Parameter Junction to leads SMC SMB Junction to case Value 20 Unit C/W 25 5.5 C/W DPAK STATIC ELECTRICAL CHARACTERISTICS Symbol Tests Conditions IR * Reverse leakage current VF * Tests Conditions Forward voltage drop Min. Typ. Max. 20 Unit A 2 10 mA V Tj = 25C VR = VRRM Tj = 125C VR = VRRM Tj = 25C IF = 3 A 0.63 Tj = 25C IF = 6 A 0.84 Tj = 125C IF = 3 A 0.52 0.57 Tj = 125C IF = 6 A 0.63 0.72 Pulse test : * tp = 380 s, < 2 % To evaluate the maximum conduction losses use the following equation : P = 0.42 x IF(AV) + 0.050 IF2(RMS) Fig. 1: Average forward power dissipation versus average forward current. Fig. 2: Average current temperature ( =0.5). = 0.1 = 0.2 3.5 = 0.5 = 0.05 2.5 = 1 Rth(j-a)=65C/W Rth(j-a)=Rth(j-l) (SMB/SMC) 2.0 1.5 1.0 T 1.0 0.5 2/7 Rth(j-a)=Rth(j-c) (DPAK) 3.0 1.5 0.0 0.0 ambient IF(av)(A) PF(av)(W) 2.5 2.0 versus =tp/T IF(av) (A) 0.5 1.0 1.5 2.0 2.5 3.0 0.5 tp 3.5 T 4.0 0.0 =tp/T 0 25 Tamb(C) tp 50 75 100 125 150 STPS340U/S/B Fig. 3-1: Non repetitivesurge peak forward current versus overload duration (SMB) (Maximum values). IM(A) 10 9 8 7 6 5 4 3 IM 2 1 0 1E-3 IM(A) 12 10 Ta=25C Ta=25C 6 Ta=50C 4 Ta=100C 2 t IM 1E-2 1E-1 1E+0 40 Tc=25C 30 20 Tc=50C Tc=100C IM t t(s) 1E-2 t(s) =0.5 IM(A) =0.5 Ta=100C t t(s) =0.5 50 0 1E-3 8 Ta=50C Fig. 3-3: Non repetitivesurge peak forward current versus overload duration (DPAK) (Maximum values). 10 Fig. 3-2: Non repetitive surge peak forward current versus overload duration (SMC) (Maximum values). 1E-1 1E+0 Fig. 4-2: Relative variation of thermal transient impedance junction to lead versus pulse duration (SMC). 1E-2 1E-1 1E+0 Fig. 4-1: Relative variation of thermal transient impedance junction to lead versus pulse duration (SMB). Zth(j-a)/Rth(j-a) 1.0 0.9 Printed circuit board (e=35m) 0.8 0.7 0.6 0.5 = 0.5 0.4 0.3 0.2 = 0.2 0.1 = 0.1 tp(s) Single pulse 0.0 1.0E-2 1.0E-1 1.0E+0 1.0E+1 T =tp/T tp 1.0E+2 1.0E+3 Fig. 4-3: Relative variation of thermal transient impedance junction to lead versus pulse duration(DPAK). Zth(j-a)/Rth(j-a) Zth(j-a)/Rth(j-a) 1.0 0.9 Printed circuit board (e=35m) 0.8 0.7 0.6 0.5 = 0.5 0.4 0.3 0.2 = 0.2 0.1 = 0.1 tp(s) Single pulse 0.0 1.0E-2 1.0E-1 1.0E+0 1.0E+1 0 1E-3 T =tp/T 1.0E+2 tp 1.0E+3 1.0 0.9 Printed circuit board (e=35m) 0.8 0.7 0.6 = 0.5 0.5 0.4 0.3 = 0.2 0.2 = 0.1 Single pulse 0.1 0.0 1E-3 1E-2 T tp(s) =tp/T 1E-1 tp 1E+0 3/7 STPS340U/S/B Fig. 5: Reverse leakage current versus reverse voltage applied. (Typical values) Fig. 6: Junction capacitance versus reverse voltage applied. (Typical values) IR(A) C(pF) 1E-2 500 Tj=150C F=1MHz Tj=25C 200 Tj=125C 1E-3 100 Tj=100C 50 1E-4 Tj=75C 20 VR(V) VR(V) 1E-5 0 5 10 15 20 25 30 35 40 Fig. 7: Forward voltage drop versus forward current.(Maximum values) 10.00 10 1 2 5 10 20 50 Fig. 8-1: Thermal resistance junction to ambient versus copper surface under tab (Epoxy printed circuit board FR4, copper thickness: 35m) (SMB). Rth(j-a) (C/W) IFM(A) 120 Typical values Tj=150C 100 1.00 80 Tj=125C 60 0.10 40 20 VFM(V) 0.01 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Fig. 8-2: Thermal resistance junction to ambient versus copper surface under tab (Epoxy printed circuitboard FR4, copper thickness: 35m) (SMC). S(Cu) (cm ) 0 0 1 2 5 Rth(j-a) (C/W) Rth(j-a) (C/W) 100 80 80 60 60 40 40 20 20 S(Cu) (cm ) S(Cu) (cm ) 4/7 4 Fig. 8-3: Thermal resistance junction to ambient versus copper surface under tab (Epoxy printed circuit board FR4, copper thickness:35m) (DPAK). 100 0 3 0 1 2 3 4 5 0 0 2 4 6 8 10 12 14 16 18 20 STPS340U/S/B PACKAGE MECHANICAL DATA DPAK DIMENSIONS REF. Millimeters Inches Min. Typ. Max Min. Typ. Max. A A1 A2 B B2 C C2 D E G H L2 L4 V2 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 6.40 4.40 9.35 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 6.60 4.60 10.10 0.086 0.035 0.001 0.025 0.204 0.017 0.018 0.236 0.251 0.173 0.368 0.80 0.60 0 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 0.259 0.181 0.397 0.031 1.00 0.023 8 0 0.039 8 FOOTPRINT DIMENSIONS (in millimeters) 6.7 6.7 6.7 3 1.6 1.6 2.3 2.3 5/7 STPS340U/S/B PACKAGE MECHANICAL DATA SMB DIMENSIONS E1 REF. D A1 A2 b c E E1 D L E A1 A2 C L b FOOTPRINT DIMENSIONS (in millimeters) 2.3 1.52 6/7 2.75 1.52 Millimeters Inches Min. Max. Min. Max. 1.90 0.05 1.95 0.15 5.10 4.05 3.30 0.75 2.45 0.20 2.20 0.41 5.60 4.60 3.95 1.60 0.075 0.002 0.077 0.006 0.201 0.159 0.130 0.030 0.096 0.008 0.087 0.016 0.220 0.181 0.156 0.063 STPS340U/S/B PACKAGE MECHANICAL DATA SMC DIMENSIONS E1 REF. Millimeters Inches Min. Max. Min. Max. 1.90 0.05 2.90 0.15 7.75 6.60 4.40 5.55 0.75 2.45 0.20 3.2 0.41 8.15 7.15 4.70 6.25 1.60 0.075 0.002 0.114 0.006 0.305 0.260 0.173 0.218 0.030 0.096 0.008 0.126 0.016 0.321 0.281 0.185 0.246 0.063 D E A1 A2 C L E2 b A1 A2 b c E E1 E2 D L FOOTPRINT DIMENSIONS (in millimeters) 3.3 2.0 4.2 2.0 Ordering type Marking Package Weight Base qty Delivery mode STPS340U U34 SMB 0.107g 2500 Tape and reel STPS340S S34 SMC 0.243g 2500 Tape and reel STPS340B S340 DPAK 0.30g 75 Tube STPS340B-TR S340 DPAK 0.30g 2500 Tape and reel Band indicates cathode on SMB, SMC Epoxy meets UL94,V0 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringementof patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 1998 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. http://www.st.com 7/7