ASIC `Performer' Pressure Transducers and Transmitters 20, 60, 100, 250, 400 and 700 bar Brochure: HYD030GB1 ASIC `Performer' Pressure Transducers and Transmitters APPLICATIONS FOR THE ASIC PERFORMER Fork lift trucks - braking and load systems. Exploded view of the ASIC Performers threaded head Truck mounted cranes - load safety systems. Earth moving machinery - hydraulic gearbox control. Racing car - gearbox, fuel, cooling and suspension systems. Earth moving machinery - hydraulic gearbox control. Water usage systems - pressurised systems for industrial and hi-rise usage. Forest Machinery - felling and logging. Paper mills - speed control and weighing systems. The Parker Filtration ASIC Performer Pressure Transducers and Transmitters. To overcome the historical problems caused by "gauge creep" of thick film sensors and the fragility of peizo-electric/ceramic based sensors, the new `Performer' range uses a high-grade Stainless Steel element, which is coated with layers of both insulative and alloy materials. These are trimmed to a very close tolerance using state of the art, semiconductor grade, laser and lon beam methods. This extremely accurate "front end" is then coupled with Application Specific Integrated Circuitry (ASIC) to produce a sensor that is both accurate In addition to the standard 6 pressure ranges available, using the ASIC technology (Application Specific Integrated Circuit) programmable software, any variation can be manufactured. Consult Parker for any additional information. A comprehensive range of Pressure Transducers and Transmitters are available from Parker Filtration. One-piece body and diaphragm machining ensures long-term product stability. All Stainless Steel construction. 6 Transducer pressure ratings, 0-5V and 1-6V outputs. 6 Transmitter pressure ratings - 2-wire 4-20mA output. Micro plug and M12 connector options. and repeatable over a wide, fully compensated, temperature range, -40C to +125C. The "Performer" is now available in a variety of thread-form and connector options. This new design offers a high stability, very low drift device, which can operate over a wide thermal range. Powered from an extended working supply range (9-35vdc {PTD} and 11-35vdc {PTX}). ASIC `Performer' Pressure Transducers and Transmitters SPECIFICATION THREAD FORM OPTIONS Pressure ranges: Vibration: G1/4 (1/4BSP) for bonded seal 20, 60, 100, 250, 400, 700 Bar. >50g Minimum over pressure: Installation: G /4 ( /4BSP) with integral seal Rated pressure times 1.5min Spanner size 22A/F. M12 x 1.5-6g NPTF1/8 (ANSI B1.20 3-1976) Minimum burst pressure: Max. (recommended) tightening torque = 30Nm 7 /16 UNF (37 Flare to SAE J514, size 4) All thread forms and sensor interface are made from174PH Stainless Steel Rated pressure times 6 min 1 1 /16 UNF (37 Flare to SAE J514, size 6) 9 NPTF1/4 (ANSI B1.20 3-1976) LINEARITY, HYSTERESIS, REPEATABILITY, RESPONSE AND TEMPERATURE ELECTRICAL Supply voltage Output 9 - 35v DC 9 - 35v DC 11- 35v DC 0 - 5v 1 - 6v 4 - 20mA Transducer current draw = 8mA Linearity: Functional Temp Range: (over any 80C temp range) <+/-0.05% -40C to +125C Hysteresis: (over any 80C temp range) <1% (over any 80C temp range) <+/-0.05% Full Scale Temperature error: Stability: Repeatability: <0.1%FS after 1m Cycles (over any 80C temp range) <+/-0.05% Full Scale Response Time: <1mS Initial Calibration Accuracy: WIRING INFORMATION +/- 1% Zero +/- 1% Span Micro DIN Option M12 Option 4 1 4 3 1 2 2 Micro DIN Option Pin Number 1 2 4 Transmitter N/A Supply +ve Return M12 Option Transducer Signal Output Supply +ve Supply Ref (0v) Pin Number 1 2 3 4 Transmitter Supply +ve Return N/A N/A Transducer Supply +ve Supply Ref (0v) Signal Output Not Used INSTALLATION DETAILS Micro DIN option M12 option Flying lead option M12 THREAD 26.5 O19.0 48.0 26.5 O19.0 53.0 47.5 26.5 22.0 A/F 22.0 A/F ASIC `Performer' Pressure Transducers and Transmitters PREFERRED PRODUCTS TABLE Pressure Transducers Part Number PTD.SB0201A1C1 PTD.SB0601A1C1 PTD.SB1001A1C1 PTD.SB2501A1C1 PTD.SB4001A1C1 PTD.SB7001A1C1 PTD.SB0201A1C2 PTD.SB0601A1C2 PTD.SB1001A1C2 PTD.SB2501A1C2 PTD.SB4001A1C2 PTD.SB7001A1C2 Description 0-20 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option. 0-60 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option. 0-100 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option. 0-250 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option. 0-400 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option. 0-700 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option. 0-20 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option. 0-60 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option. 0-100 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option. 0-250 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option. 0-400 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option. 0-700 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option. Pressure Transmitters Part Number PTX.B0201A1C1 PTX.B0601A1C1 PTX.B1001A1C1 PTX.B2501A1C1 PTX.B4001A1C1 PTX.B7001A1C1 PTX.B0201A1C2 PTX.B0601A1C2 PTX.B1001A1C2 PTX.B2501A1C2 PTX.B4001A1C2 PTX.B7001A1C2 Note 1: Description 0-20 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option. 0-60 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option. 0-100 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option. 0-250 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option. 0-400 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option. 0-700 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option. 0-20 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option. 0-60 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option. 0-100 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option. 0-250 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option. 0-400 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option. 0-700 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option. For a flying lead assembly, select the appropriate M12 option above and add a suitable cable from the "Associated Products" options below. Example: PTX.B2505A1C2 + P.833PVC-2M = A 250 bar 4-20mA Transmitter, G1/4 for bonded seal, M12 connector with 2m PVC flying lead. Note 2: Integral Thread options are also available in the above ranges. Pressure Transducers (PTD) Pressure Transmitters (PTX) A1 PTD Connector Types Pressure Transducer (Voltage Output) A1 PTX Micro Din 43650 C1 M12 C2 O/P Combination Connector Types Pressure Transmitter (4-20 mA Product) Pressure Measurement Bar 1-6V S 0-5V V 0.5 - 4.5 V Ratiometric R G1/4 (1/4BSPP)for bonded Seal 1 G1/4 (1/4 BSPP) + Integral Seal 2 Secondary Thread Forms Pressure Measurement Bar C1 M12 C2 B Primary Thread Forms P 0.1 - 4.9 V Micro Din 43650 1 G1/4 (1/4 BSPP) + Integral Seal 2 0 to 60 060 0 to 100 100 1 4 0 to 250 250 1 5 0 to 400 400 7/16 - 20 UNF 6 0 to 700 700 M12 x 1.5 Pitch with Spigot Pressure Range - Bar G1/4 (1/4BSPP)for bonded Seal 3 /8 NPT Primary Thread Form 020 R1/4 (1/4 BSPT) /4 NPT B Pressure Range - Bar 0 to 20 7 Secondary Thread Forms R1/4 (1/4 BSPT) 3 1 4 1 5 7 6 M12 x 1.5 Pitch with Spigot 7 /4 NPT /8 NPT /16 - 20 UNF 0 to 20 020 0 to 60 060 0 to 100 100 M12 (IP68) Moulded Cable Options 0 to 250 250 2 Metre PVC P.833PVC-2M M12 (IP68) Moulded Cable Options 0 to 400 400 5 Metre PVC P.833PVC-5M 2 Metre PVC P.833PVC-2M 0 to 700 700 10 Metre PVC P.833PVC-10M 5 Metre PVC P.833PVC-5M 10 Metre PVC P.833PVC-10M Associated Products Associated Products Parker Hannifin UK Ltd Filter Division Europe Condition Monitoring Centre Brunel Way, Thetford Norfolk, IP24 1HP, UK Phone: +44 (0) 1842 763299 Fax: +44 (0) 1842 756300 www.ucc.co.uk