1
www.clare.com
LBA120L
DS-LBA120L-R3
LBA120L is 250V, 170mA, 20Ωindependent 1-Form-A
and 1-Form-B relays. It features low on-resistance com-
bined with enhanced peak load current handling capabil-
ities. Current limiting version is available (“L” suffix, see
specification for variations in performance).
•Telecommunications
•Telecom Switching
•Tip/Ring Circuits
•Modem Switching (Laptop, Notebook, Pocket Size)
•Hookswitch
•Dial Pulsing
•Ground Start
•Ringer Injection
•Instrumentation
•Multiplexers
•Data Acquisition
•Electronic Switching
•I/O Subsystems
•Meters (Watt-Hour, Water, Gas)
•Medical Equipment-Patient/Equipment Isolation
•Security
•Aerospace
•Industrial Controls
•UL Recognized: File Number E76270
•CSA Certified: File Number LR 43639-10
•BSI Certified to:
•BS EN 60950:1992 (BS7002:1992)
Certificate #: 7344
•BS EN 41003:1993
Certificate #: 7344
•Small 8 Pin DIP Package
•Low Drive Power Requirements (TTL/CMOS
Compatible)
•No Moving Parts
•High Reliability
•Arc-Free With No Snubbing Circuits
•3750VRMS Input/Output Isolation
•FCC Compatible
•VDE Compatible
•No EMI/RFI Generation
•Machine Insertable, Wave Solderable
•Current Limiting Surface Mount and Tape & Reel
V ersions A vailable
Applications
Features
Description
Approvals
DUAL POLE OptoMOS®Relay
Ordering Information
Part # Description
LBA120L 8 Pin DIP
LBA120LS 8 Pin Surface Mount (50/Tube)
LBA120LSTR 8 Pin Surface Mount (1000/Reel)
LBA120L Units
Load Voltage 250 V
Load Current 170 mA
Max RON 20 Ω
Pin Configuration
Switching Characteristics of
Normally Closed (Form B) Devices
CONTROL
10ms
10%
90% 90%
+
+
TON
TOFF
+
Switching Characteristics of
Normally Open (Form A) Devices
CONTROL
LOAD
10ms
10% 10%
90%
+
TON TOFF
+
+
1
2
3
4
8
7
6
5
LBA120L Pinout
+ Control - Normally Closed
– Control - Normally Closed
+ Control - Normally Open
– Control - Normally Open
Normally Closed Pole
Normally Open Pole
AC/DC Configuration
www.clare.com
LBA120L
Rev. 3
Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for an extended period may degrade the device and effect
its reliability.
Absolute Maximum Ratings (@ 25˚ C)
2
Parameter Min Typ Max Units
Input Power Dissipation - - 1501mW
Input Control Current - - 50 mA
Peak (10ms) - - 1 A
Reverse Input Voltage - - 5 V
Total Power Dissipation - - 8002mW
Isolation Voltage
Input to Output 3750 - - VRMS
Operational Temperature -40 - +85 °C
Storage Temperature -40 - +125 °C
Soldering Temperature
DIP Package - - +260 °C
Surface Mount Package - - +220 °C
(10 Seconds Max.)
1Derate Linearly 1.33 mw/˚C
2Derate Linearly 6.67 mw/˚C
Electrical Characteristics
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics @ 25°C
Load Voltage (Peak) - VL- - 250 V
Load Current*(Continuous)
AC/DC Configuration - IL- - 150 mA
Peak Load Current 10ms ILPK ---mA
On-Resistance
AC/DC Configuration IL=170mA RON -2125 Ω
Off-State Leakage Current VL=250V ILEAK --1µA
Switching Speeds
Turn-On IF=5mA, VL=10V TON --5ms
Turn-Off IF=5mA, VL=10V TOFF --5ms
Output Capacitance 50V; f=1MHz COUT -50- pF
Load Current Limiting Form A only ICL 190 235 280 mA
Input Characteristics @ 25°C
Input Control Current IL=120mA IF5-50mA
Input Dropout Current - - 0.4 0.7 - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Voltage - VR--5 V
Reverse Input Current VR=5V IR- - 10 µA
Input to Output Capacitance - CI/O -3- pF
Input to Output Isolation - VI/O 3750 - - VRMS
*NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value.
LBA120L
www.clare.com
Rev. 3
PERFORMANCE DATA*
The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
3
LBA120L
Typical LED Forward Voltage Drop
(N=50 Ambient Temperature = 25°C)
IF = 5mADC
35
30
25
20
15
10
5
01.17 1.19 1.21 1.23 1.25
LED Forward Voltage Drop (V)
Device Count (N)
LBA120L - Form A
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
35
30
25
20
15
10
5
014.0 14.8 15.614.4 15.2
On-Resistance (Ω)
Device Count (N)
LBA120L - Form B
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
35
30
25
20
15
10
5
010.4 10.8 11.2 12.011.6 12.4
On-Resistance (Ω)
Device Count (N)
LBA120L - Form A
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
35
30
25
20
15
10
5
0380 388 396384 392 400
Blocking Voltage (V)
Device Count (N)
LBA120L - Form B
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
35
30
25
20
15
10
5
0291.25 293.75 296.25 298.75 301.25 303.75
Blocking Voltage (V)
Device Count (N)
LBA120L - Form A
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC
40
35
30
25
20
15
10
5
00.8 1.2 1.60.6 1.0 1.4 1.8
LED Current (mA)
Device Count (N)
)
LBA120L - Form B
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
0.63 0.81 1.17 1.530.99 1.35
LED Current (mA)
Device Count (N)
30
25
20
15
10
5
0
LBA120L - Form A
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
0.5 0.9 1.30.3 0.7 1.1 1.5
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
LBA120L - Form B
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC)
35
25
20
15
10
5
00.63 0.99 1.350.45 0.81 1.17
LED Current (mA)
Device Count (N)
LBA120L - Form A
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC; IF = 5mADC)
0.23 0.41 0.59 0.770.680.500.32
Turn-On (ms)
Device Count (N)
30
25
20
15
10
5
0
LBA120L - Form B
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC; IF = 5mADC)
0.42 0.66 0.900.54 0.78
Turn-On (ms)
Device Count (N)
35
30
25
20
15
10
5
00.30
LBA120L - Form A
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC; IF = 5mADC)
0.06 0.14 0.22 0.300.10 0.18 0.26
Turn-Off (ms)
Device Count (N)
35
30
25
20
15
10
5
0
www.clare.com
4
LBA120L
Rev. 3
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
LBA120L - Form B
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 170mADC; IF = 5mADC)
0.875 1.375 1.8750.625 1.125 1.625
Turn-Off (ms)
Device Count (N)
35
30
25
20
15
10
5
0
LBA120L - Form B
Typical Load Current vs. Temperature
Temperature (°C)
Load Current (mA)
250
200
150
100
50
0-40 -20 0 20 40 60 80 120100
5mA
LBA120L - Form A
Typical Load Current vs. Temperature
Temperature (°C)
Load Current (mA)
250
200
150
100
50
0-40 -20 0 20 40 60 80 120100
20mA
10mA
5mA
LBA120L - Form A
Typical Leakage vs. Temperature
(Measured across Pins 4 & 6)
Temperature (°C)
Leakage (µA)
-40
0.18
0.16
0.14
0.12
0.10
0.08
0.06 -20 0 20 40 60 80 100
LBA120L - Form B
Typical Leakage vs. Temperature
(Measured across Pins 4 & 6)
Temperature (°C)
Leakage (µA)
-40
0.030
0.025
0.020
0.015
0.010
0.005
0-20 0 20 40 60 80 100
LBA120L - Form A
Typical Blocking Voltage
vs. Temperature
Temperature (°C)
Blocking Voltage (VRMS)
-40
400
395
390
385
380
375 -20 0 20 40 60 80 100
LBA120L - Form B
Typical Blocking Voltage
vs. Temperature
Temperature (°C)
Blocking Voltage (VRMS)
-40
310
305
300
295
290
285 -20 0 20 40 60 80 100
LBA120L - Form A
Typical Turn-On vs. Temperature
(Load Current = 170mADC)
Temperature (°C)
Turn-On (ms)
-40
0.6
0.5
0.4
0.3
0.2
0.1
0-20 0 20 40 60 80 100
5mA
10mA
20mA
LBA120L - Form B
Typical Turn-On vs. Temperature
(Load Current = 170mADC)
Temperature (°C)
Turn-On (ms)
-40
0.12
0.10
0.08
0.06
0.04
0.02
0-20 0 20 40 60 80 100
5mA
LBA120L - Form A
Typical Turn-Off vs. Temperature
(Load Current = 170mADC)
Temperature (°C)
Turn-Off (ms)
-40
0.30
0.25
0.20
0.15
0.10
0.05
0-20 0 20 40 60 80 100
5mA
LBA120L - Form B
Typical Turn-Off vs. Temperature
(Load Current = 170mADC)
Temperature (°C)
Turn-Off (ms)
-40
2.500
2.000
1.500
1.000
0.500
0-20 0 20 40 60 80 100
5mA
10mA
20mA
LBA120L
Typical LED Forward Voltage Drop
vs. Temperature
Temperature (°C)
LED Forward Voltage Drop (V)
1.8
1.6
1.4
1.2
1.0
0.8-40 -20 0 20 40 60 80 120100
50mA
30mA
20mA
10mA
5mA
LBA120L
www.clare.com 5
Rev. 3
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
LBA120L - Form A
Typical Turn-On vs. LED Forward Current
(Load Current = 170mADC)
Turn-On (ms)
LED Forward Current (mA)
02 4 6 8 10 12 14 16 18
0.40
0.35
0.30
0.25
0.20
0.15
0.10 20
LBA120L - Form B
Typical Turn-On vs. LED Forward Current
(Load Current = 170mADC)
LED Forward Current (mA)
Turn-On (ms)
05 1015202530354045
0.634
0.632
0.630
0.628
0.626
0.624
0.622 50
LBA120L - Form A
Typical Turn-Off vs. LED Forward Current
(Load Current = 170mADC)
LED Forward Current (mA)
Turn-Off (ms)
02 4 6 8 10 12 14 16 18 20
0.160
0.150
0.140
0.130
0.120
0.110
0.100
LBA120L - Form B
Typical Turn-Off vs. LED Forward Current
(Load Current = 170mADC)
LED Forward Current (mA)
Turn-Off (ms)
05 1015202530354045
1.2
1.0
.8
.6
.4
.2
050
LBA120L - Form A
Typical On-Resistance vs. Temperature
(Load Current = 170mADC; IF = 5mA)
Temperature (°C)
On-Resistance (Ω)
-40
60
50
40
30
20
10
0-20 0 20 40 60 80 100
LBA120L - Form B
Typical On-Resistance vs. Temperature
(Load Current = 170mADC; IF = 5mADC)
Temperature (°C)
On-Resistance (Ω)
-40
60.000
50.000
40.000
30.000
20.000
10.000
0-20 0 20 40 60 80 100
LBA120L - Form A
Typical IF for Switch Operation
vs. Temperature
(Load Current = 170mADC)
Temperature (°C)
LED Current (mA)
-40
3.000
2.500
2.000
1.500
1.000
0.500
0-20 0 20 40 60 80 100
LBA120L - Form B
Typical IF for Switch Operation
vs. Temperature
(Load Current = 170mADC; IF = 5mADC)
Temperature (°C)
LED Current (mA)
-40
3.0
2.5
2.0
1.5
1.0
0.5
0-20 0 20 40 60 80 100
LBA120L - Form A
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 170mADC)
Temperature (°C)
LED Current (mA)
-40
3.000
2.500
2.000
1.500
1.000
0.500
0-20 0 20 40 60 80 100
LBA120L - Form B
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 170mADC)
Temperature (°C)
LED Current (mA)
-40
3.0
2.5
2.0
1.5
1.0
0.5
0-20 0 20 40 60 80 100
LBA120L - Form A
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C)
IF = 5mADC
Load Voltage (V)
Load Current (mA)
200
150
100
50
0
-50
-100
-150
-200-2.5 -1.5-2.0 -0.5-1.0 0 0.5 1.5 2.01.0 2.5
LBA120L - Form B
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C)
IF = 5mADC
Load Voltage (V)
Load Current (mA)
200
150
100
50
0
-50
-100
-150
-200-2.0 -1.5 -1.0 -0.5 0.5 1.0 1.5
02.0
LBA120L
Energy Rating Curve
Time
Load Current (A)
10µs
1.2
1.0
0.8
0.6
0.4
0.2
01ms100µs 100ms 1s
10ms 10s 100s
LBA120L
Typical Current Limiting vs. Temperature
IF = 5mADC
Temperature (°C)
Current (mA)
400
350
300
250
200
150
100
50
0-40 -20 0 20 40 60 80 100
www.clare.com
6
LBA120L
Rev. 3
Dimensions
mm
(inches)
Mechanical Dimensions
4.445 ± .127
(.175 ± .005) 3.302
(.130)
7.620 ± .254
(.300 ± .010)
6.350 ± .127
(.250 ± .005)
8.077 ± .127
(.318 ± .005)
2.540 ± .127
(.100 ± .005)
9.525 ± .254
(.375 ± .010)
.457 ± .076
(.018 ± .003)
.254 TYP.
(.010)
.635 TYP.
(.025)
8 Pin DIP Surface Mount (“S” Suffix) 9.652 ± .381
(.380 ± .015)
7.239 TYP.
(.285)
3.302
(.130)
7.620 ± .254
(.300 ± .010)
9.144 TYP.
(.360)
6.350 ± .127
(.250 ± .005)
9.652 ± .381
(.380 ± .015)
2.540 ± .127
(.100 ± .005)
9.144 ± .508
(.360 ± .020)
.457 ± .076
(.018 ± .003)
8.077 ± .127
(.318 ± .005 )
8 Pin DIP Through Hole (Standard)
8 Pin Flatpack (“P” Suffix)
7.620 ± .254
(.300 ± .010)
2.159 TYP.
(.085)
2.286 MAX.
(.090)
9.398 ± .127
(.370 ± .005)
6.350 ± .127
(.250 ± .005)
9.652 ± .381
(.380 ± .015)
2.540 ± .127
(.100 ± .005)
8.077 ± .127
(.318 ± .005)
.457 ± .076
(.018 ± .003)
.203
(.008)
.635 ± .127
(.025)
PC Board Pattern
(Top View)
6.350 ± .127
(.250 ± .005)
2.540 ± .127
(.100 ± .005)
7.620 ± .127
(.300 ± .005)
7.620 ± .127
(.300 ± .005)
8-.800 DIA.
(8-.031 DIA.)
PC Board Pattern
(Top View) 2.540 ± .127
(.100 ± .005)
8.305 ± .127
(.327 ± .005)
1.905 ± .127
(.075 ± .005)
1.498 ± .127
(.059 ± .005)
PC Board Pattern
(Top View)
2.540 ± .127
(.100 ± .005)
8.763 ± .127
(.345 ± .005)
1.193
(.047)
.787
(.031)
LBA120L
www.clare.com 7
Rev. 3
Dimensions
mm
(inches)
Mechanical Dimensions
Tape and Reel Packaging for 8 Pin Flatpack Package
7.493 ± .102
(.295 ± .004)
12.090
(.476)
1.753 ± 0.102
(.069 ± .004)
3.987 ± .102
(.157 ± .004)
1.498 ± .102
(.059 ± .004)
6.731 MAX.
(.265) .406 MAX.
(.016)
4.877
(.192)
Top Cover
Tape
2.007 ± .102
(.079 ± .004)
11.988 ± .102
(.472 ± .004)
User Direction of Feed
.050R TYP.
16.002 ± .305
(.630 ± .012)
10.287
(.405)
Embossment
Embossed Carrier
Top Cover
Tape Thickness
.102 MAX.
(.004)
10.287 ± .102
(.405 ± .004) 1.549 ± .102
(.061 ± .004)
330.2 DIA.
(13.00)
18
Tape and Reel Packaging for 8 Pin Surface Mount Package
7.493 ± .102
(.295 ± .004)
12.090
(.476)
1.753 ± .102
(.069 ± .004)
3.987 ± .102
(.157 ± .004)
1.498 ± .102
(.059 ± .004)
6.731 MAX.
(.265) .406 MAX.
(.016)
4.877
(.192)
Top Cover
Tape
2.007 ± .102
(.079 ± .004)
11.989 ± .102
(.472 ± .004)
User Direction of Feed
.050R TYP.
16.002 ± .305
(.630 ± .012)
10.300
(.405)
Embossment
Embossed Carrier
Top Cover
Tape Thickness
.102 MAX.
(.004)
10.300 ± .102
(.405 ± .004) 1.549 ± .102
(.061 ± .004)
330.2 DIA.
(13.00)
18
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions
at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and
disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to sup-
port or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or
make changes to its products at any time without notice.
Specification: DS-LBA120L-R3.0
©Copyright 2002, Clare, Inc.
All rights reserved. Printed in USA.
6/25/02
For additional information please visit our website at: www.clare.com
