June 2017
DocID11423 Rev 7
1/30
This is information on a product in full production.
www.st.com
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
10 A, 600 V short-circuit rugged IGBT
Datasheet - production data
Figure 1: Internal schematic diagram
Features
Lower on voltage drop (VCE(sat))
Lower CRES / CIES ratio (no cross-conduction
susceptibility)
Very soft ultra fast recovery antiparallel
diode
Short-circuit withstand time 10 μs
Applications
High frequency motor controls
SMPS and PFC in both hard switch and
resonant topologies
Motor drives
Description
These devices are very fast IGBTs developed
using advanced PowerMESH™ technology. This
process guarantees an excellent trade-off
between switching performance and low on-state
behavior. These devices are well-suited for
resonant or soft-switching applications.
Table 1: Device summary
Order code
Marking
Package
Packing
STGB10NC60KDT4
GB10NC60KD
D²PAK
Tape and reel
STGD10NC60KDT4
GD10NC60KD
DPAK
STGF10NC60KD
GF10NC60KD
TO-220FP
Tube
STGP10NC60KD
GP10NC60KD
TO-220
Contents
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
2/30
DocID11423 Rev 7
Contents
1 Electrical ratings ............................................................................. 3
2 Electrical characteristics ................................................................ 4
2.1 Electrical characteristics (curves) ...................................................... 7
3 Test circuits ................................................................................... 10
4 Package information ..................................................................... 11
4.1 D²PAK (TO-263) type A package information ................................. 11
4.2 D²PAK (TO-263) type B package information ................................. 14
4.3 DPAK (TO-252) type A package information................................... 17
4.4 TO-220FP package information ...................................................... 20
4.5 TO-220 type A package information ................................................ 22
4.6 D²PAK (TO-263) type A packing information .................................. 24
4.7 D²PAK (TO-263) type B packing information .................................. 26
4.8 DPAK (TO-252) type A tape packing information ............................ 27
5 Revision history ............................................................................ 29
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
Electrical ratings
DocID11423 Rev 7
3/30
1 Electrical ratings
Table 2: Absolute maximum ratings
Symbo
l
Parameter
Value
Unit
D²PAK,
TO-220
DPAK
TO-220FP
VCES
Collector-emitter voltage (VGE = 0 V)
600
V
IC(1)
Continuous collector current at TC = 25 °C
20
9
A
Continuous collector current at TC = 100 °C
10
6
A
ICL(2)
Turn-off latching current
30
A
ICP(3)
Pulsed collector current
30
A
VGE
Gate-emitter voltage
±20
V
IF
Diode RMS forward current at Tc=25°C
10
A
IFSM
Surge non repetitive forward current tp = 10
ms sinusoidal
20
A
PTOT
Total dissipation at TC = 25 °C
65
62
25
W
VISO
Insulation withstand voltage (RMS) from all
three leads to external heat sink
(t=1 s;TC=25 °C)
2500
V
tscw
Short-circuit withstand time VCE = 0.5 VCES,
Tj = 125 °C, RG = 10 Ω, VGE = 12 V
10
μs
Tstg
Storage temperature range
- 55 to 150
°C
TJ
Operating junction temperature range
Notes:
(1)Calculated according to the iterative formula:
(2)Vclamp = 80 % VCES, VGE = 15 V, RG = 10 Ω, TJ = 150 °C.
(3)Pulse width limited by maximum junction temperature and turn-off within RBSOA.
Table 3: Thermal data
Symbol
Parameter
Value
Unit
TO-220, D²PAK
DPAK
TO-220FP
Rthj-case
Thermal resistance junction-case IGBT
1.9
2
5
°C/W
Rthj-case
Thermal resistance junction-case diode
4
4.5
7
Rthj-amb
Thermal resistance junction-ambient
62.5
100
62.5
Electrical characteristics
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
4/30
DocID11423 Rev 7
2 Electrical characteristics
TC = 25 °C unless otherwise specified
Table 4: Static characteristics
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
V(BR)CES
Collector-emitter breakdown
voltage
IC = 1 mA, VGE = 0 V
600
V
VCE(sat)
Collector-emitter saturation
voltage
VGE =15 V, IC = 5 A
2.2
2.5
V
VGE = 15 V, IC = 5 A,
Tj= 125 °C
1.8
VGE(th)
Gate threshold voltage
VCE = VGE, IC = 250 µA
4.5
6.5
V
ICES
Collector cut-off current
VCE = 600 V, VGE = 0 V
150
µA
VCE=600 V, VGE = 0 V,
Tj = 125 °C (1)
1
mA
IGES
Gate-emitter leakage
current
VGE = ±20 V
±100
nA
gfs(2)
Forward transconductance
VCE = 15 V, IC= 5 A
15
S
Notes:
(1)Defined by design, not subject to production test.
(2)Pulse test: pulse duration < 300 μs, duty cycle < 2 %.
Table 5: Dynamic characteristics
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Cies
Input capacitance
VCE= 25 V, f = 1 MHz,
VGE = 0 V
-
380
-
pF
Coes
Output capacitance
-
46
-
Cres
Reverse transfer
capacitance
-
8.5
-
Qg
Total gate charge
VCE = 390 V, IC = 5 A,
VGE = 0 to 15 V
(see Figure 19: " Gate charge
test circuit")
-
19
-
nC
Qge
Gate-emitter charge
-
5
-
Qgc
Gate-collector charge
-
9
-
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
Electrical characteristics
DocID11423 Rev 7
5/30
Table 6: Switching on/off (inductive load)
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
td(on)
Turn-on delay time
VCC = 390 V, IC = 5 A,
RG = 10 Ω , VGE = 15 V
(see Figure 18: " Test circuit
for inductive load switching"
and Figure 20: " Switching
waveform")
-
17
-
ns
tr
Current rise time
-
6
-
ns
(di/dt)on
Turn-on current slope
-
655
-
A/µs
td(on)
Turn-on delay time
VCC = 390 V, IC = 5 A,
RG = 10 Ω , VGE = 15 V,
Tj=125°C
(see Figure 18: " Test circuit
for inductive load switching"
and Figure 20: " Switching
waveform")
-
16.5
-
ns
tr
Current rise time
-
6.5
-
ns
(di/dt)on
Turn-on current slope
-
575
-
A/µs
tr(Voff)
Off voltage rise time
VCC = 390 V, IC = 5 A,
RG = 10 Ω, VGE = 15 V
(see Figure 18: " Test circuit
for inductive load switching"
and Figure 20: " Switching
waveform")
-
33
-
ns
td(off)
Turn-off delay time
-
72
-
ns
tf
Current fall time
-
82
-
ns
tr(Voff)
Off voltage rise time
VCC = 390 V, IC = 5 A,
RG = 10 Ω, VGE = 15 V,
Tj=125 °C
(see Figure 18: " Test circuit
for inductive load switching"
and Figure 20: " Switching
waveform")
-
60
-
ns
td(off)
Turn-off delay time
-
106
-
ns
tf
Current fall time
-
136
-
ns
Table 7: Switching energy (inductive load)
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Eon(1)
Turn-on switching energy
VCC = 390 V, IC = 5 A,
RG = 10 Ω , VGE = 15 V
(see Figure 18: " Test circuit
for inductive load switching")
-
55
-
μJ
Eoff(2)
Turn-off switching energy
-
85
-
μJ
Ets
Total switching energy
-
140
-
μJ
Eon(1)
Turn-on switching energy
VCC = 390 V, IC = 5 A,
RG = 10 Ω , VGE = 15 V,
Tj=125°C
(see Figure 18: " Test circuit
for inductive load switching")
-
87
-
μJ
Eoff(2)
Turn-off switching energy
-
162
-
μJ
Ets
Total switching energy
-
249
-
μJ
Notes:
(1)Including the reverse recovery of the diode.
(2)Including the tail of the collector current.
Electrical characteristics
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
6/30
DocID11423 Rev 7
Table 8: Collector-emitter diode
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
VF
Forward on-voltage
IF=5 A
-
2
-
V
IF=5 A, Tj=125 °C
-
1.6
-
V
trr
Reverse recovery time
IF=5 A, VR=40 V, di/dt=100
A/μs (see Figure 21: " Diode
reverse recovery waveform")
-
22
-
ns
Qrr
Reverse recovery charge
-
14
-
nC
Irrm
Reverse recovery current
-
1.3
-
A
trr
Reverse recovery time
IF=5 A, VR=40 V, Tj=125 °C,
di/dt=100 A/μs (see Figure
21: " Diode reverse recovery
waveform")
-
35
-
ns
Qrr
Reverse recovery charge
-
40
-
nC
Irrm
Reverse recovery current
-
2.2
-
A
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
Electrical characteristics
DocID11423 Rev 7
7/30
2.1 Electrical characteristics (curves)
Figure 2: Output characteristics
Figure 3: Transfer characteristics
Figure 4: Transconductance
Figure 5: Collector-emitter on voltage vs
temperature
Figure 6: Collector-emitter on voltage vs
temperature
Figure 7: Capacitance variations
Electrical characteristics
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
8/30
DocID11423 Rev 7
Figure 8: Normalized gate threshold voltage vs
temperature
Figure 9: Collector-emitter on voltage vs collector
current
Figure 10: Normalized breakdown voltage vs
temperature
Figure 11: Switching energy vs temperature
Figure 12: Switching energy vs gate resistance
Figure 13: Switching energy vs collector current
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
Electrical characteristics
DocID11423 Rev 7
9/30
Figure 14: Thermal impedance for D²PAK, DPAK
and TO-220
Figure 15: Turn-off SOA
Figure 16: Emitter-collector diode characteristics
Figure 17: Thermal impedance for TO-220FP
Test circuits
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
10/30
DocID11423 Rev 7
3 Test circuits
Figure 18: Test circuit for inductive load
switching
Figure 19: Gate charge test circuit
Figure 20: Switching waveform
Figure 21: Diode reverse recovery waveform
A A
C
E
G
B
RG
+
-
G
C3.3
µF 1000
µF
L=100 µH
VCC
E
D.U.T
B
AM01504v1
t
AM01507v1
10%
VRRM
dv/dt
di/dt
IRRM
IF
trr
tstf
Qrr
IRRM
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
Package information
DocID11423 Rev 7
11/30
4 Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
4.1 D²PAK (TO-263) type A package information
Figure 22: D²PAK (TO-263) type A package outline
Package information
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
12/30
DocID11423 Rev 7
Table 9: D²PAK (TO-263) type A package mechanical data
Dim.
mm
Min.
Typ.
Max.
A
4.40
4.60
A1
0.03
0.23
b
0.70
0.93
b2
1.14
1.70
c
0.45
0.60
c2
1.23
1.36
D
8.95
9.35
D1
7.50
7.75
8.00
D2
1.10
1.30
1.50
E
10.00
10.40
E1
8.50
8.70
8.90
E2
6.85
7.05
7.25
e
2.54
e1
4.88
5.28
H
15.00
15.85
J1
2.49
2.69
L
2.29
2.79
L1
1.27
1.40
L2
1.30
1.75
R
0.40
V2
0°
8°
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
Package information
DocID11423 Rev 7
13/30
Figure 23: D²PAK (TO-263) type A recommended footprint (dimensions are in mm)
Package information
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
14/30
DocID11423 Rev 7
4.2 D²PAK (TO-263) type B package information
Figure 24: D²PAK (TO-263) type B package outline
0079457_23_B
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
Package information
DocID11423 Rev 7
15/30
Table 10: D²PAK (TO-263) type B mechanical data
Dim.
mm
Min.
Typ.
Max.
A
4.36
4.56
A1
0
0.25
b
0.70
0.90
b1
0.51
0.89
b2
1.17
1.37
b3
1.36
1.46
c
0.38
0.694
c1
0.38
0.534
c2
1.19
1.34
D
8.60
9.00
D1
6.90
7.50
E
10.15
10.55
E1
8.10
8.70
e
2.54 BSC
H
15.00
15.60
L
1.90
2.50
L1
1.65
L2
1.78
L3
0.25
L4
4.78
5.28
Package information
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
16/30
DocID11423 Rev 7
Figure 25: D²PAK (TO-263) type B recommended footprint (dimensions are in mm)
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
Package information
DocID11423 Rev 7
17/30
4.3 DPAK (TO-252) type A package information
Figure 26: DPAK (TO-252) type A package outline
Package information
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
18/30
DocID11423 Rev 7
Table 11: DPAK (TO-252) type A mechanical data
Dim.
mm
Min.
Typ.
Max.
A
2.20
2.40
A1
0.90
1.10
A2
0.03
0.23
b
0.64
0.90
b4
5.20
5.40
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
D1
4.95
5.10
5.25
E
6.40
6.60
E1
4.60
4.70
4.80
e
2.16
2.28
2.40
e1
4.40
4.60
H
9.35
10.10
L
1.00
1.50
(L1)
2.60
2.80
3.00
L2
0.65
0.80
0.95
L4
0.60
1.00
R
0.20
V2
0°
8°
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
Package information
DocID11423 Rev 7
19/30
Figure 27: DPAK (TO-252) type A recommended footprint (dimensions are in mm)
Package information
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
20/30
DocID11423 Rev 7
4.4 TO-220FP package information
Figure 28: TO-220FP package outline
7012510_Rev_12_B
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
Package information
DocID11423 Rev 7
21/30
Table 12: TO-220FP package mechanical data
Dim.
mm
Min.
Typ.
Max.
A
4.4
4.6
B
2.5
2.7
D
2.5
2.75
E
0.45
0.7
F
0.75
1
F1
1.15
1.70
F2
1.15
1.70
G
4.95
5.2
G1
2.4
2.7
H
10
10.4
L2
16
L3
28.6
30.6
L4
9.8
10.6
L5
2.9
3.6
L6
15.9
16.4
L7
9
9.3
Dia
3
3.2
Package information
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
22/30
DocID11423 Rev 7
4.5 TO-220 type A package information
Figure 29: TO-220 type A package outline
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
Package information
DocID11423 Rev 7
23/30
Table 13: TO-220 type A package mechanical data
Dim.
mm
Min.
Typ.
Max.
A
4.40
4.60
b
0.61
0.88
b1
1.14
1.55
c
0.48
0.70
D
15.25
15.75
D1
1.27
E
10.00
10.40
e
2.40
2.70
e1
4.95
5.15
F
1.23
1.32
H1
6.20
6.60
J1
2.40
2.72
L
13.00
14.00
L1
3.50
3.93
L20
16.40
L30
28.90
øP
3.75
3.85
Q
2.65
2.95
Package information
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
24/30
DocID11423 Rev 7
4.6 D²PAK (TO-263) type A packing information
Figure 30: D2PAK type A tape outline
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
Package information
DocID11423 Rev 7
25/30
Figure 31: D2PAK type A reel outline
Table 14: D²PAK type A tape and reel mechanical data
Tape
Reel
Dim.
mm
Dim.
mm
Min.
Max.
Min.
Max.
A0
10.5
10.7
A
330
B0
15.7
15.9
B
1.5
D
1.5
1.6
C
12.8
13.2
D1
1.59
1.61
D
20.2
E
1.65
1.85
G
24.4
26.4
F
11.4
11.6
N
100
K0
4.8
5.0
T
30.4
P0
3.9
4.1
P1
11.9
12.1
Base quantity
1000
P2
1.9
2.1
Bulk quantity
1000
R
50
T
0.25
0.35
W
23.7
24.3
Package information
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
26/30
DocID11423 Rev 7
4.7 D²PAK (TO-263) type B packing information
Figure 32: D2PAK type B tape outline
Figure 33: D2PAK type B reel outline
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
Package information
DocID11423 Rev 7
27/30
Table 15: D²PAK type B reel mechanical data
Dim.
mm
Min.
Max.
A
330
B
1.5
C
12.8
13.2
D
20.2
G
24.4
26.4
N
100
T
30.4
4.8 DPAK (TO-252) type A tape packing information
Figure 34: DPAK (TO-252) tape outline
Package information
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
28/30
DocID11423 Rev 7
Figure 35: DPAK (TO-252) reel outline
Table 16: DPAK (TO-252) tape and reel mechanical data
Tape
Reel
Dim.
mm
Dim.
mm
Min.
Max.
Min.
Max.
A0
6.8
7
A
330
B0
10.4
10.6
B
1.5
B1
12.1
C
12.8
13.2
D
1.5
1.6
D
20.2
D1
1.5
G
16.4
18.4
E
1.65
1.85
N
50
F
7.4
7.6
T
22.4
K0
2.55
2.75
P0
3.9
4.1
Base qty.
2500
P1
7.9
8.1
Bulk qty.
2500
P2
1.9
2.1
R
40
T
0.25
0.35
W
15.7
16.3
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
Revision history
DocID11423 Rev 7
29/30
5 Revision history
Table 17: Document revision history
Date
Revision
Changes
14-Jun-2005
1
First release.
19-Jul-2005
2
Complete version.
27-Jan-2006
3
Inserted ecopack indication.
01-Mar-2006
4
The document has been reformatted.
08-Feb-2007
5
Modified value on Table 6.: Switching on/off (inductive load).
24-Nov-2009
6
Inserted DPAK package option.
06-Jun-2017
7
Modified part numbers on cover page.
Updated Section 4: "Package information".
Minor text changes.
STGB10NC60KDT4, STGD10NC60KDT4,
STGF10NC60KD, STGP10NC60KD
30/30
DocID11423 Rev 7
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2017 STMicroelectronics – All rights reserved
