STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD 10 A, 600 V short-circuit rugged IGBT Datasheet - production data Features Lower on voltage drop (VCE(sat)) Lower CRES / CIES ratio (no cross-conduction susceptibility) Very soft ultra fast recovery antiparallel diode Short-circuit withstand time 10 s Applications High frequency motor controls SMPS and PFC in both hard switch and resonant topologies Motor drives Figure 1: Internal schematic diagram Description These devices are very fast IGBTs developed using advanced PowerMESHTM technology. This process guarantees an excellent trade-off between switching performance and low on-state behavior. These devices are well-suited for resonant or soft-switching applications. Table 1: Device summary Order code Marking Package STGB10NC60KDT4 GB10NC60KD DPAK STGD10NC60KDT4 GD10NC60KD DPAK STGF10NC60KD GF10NC60KD TO-220FP STGP10NC60KD GP10NC60KD TO-220 June 2017 DocID11423 Rev 7 This is information on a product in full production. Packing Tape and reel Tube 1/30 www.st.com Contents STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Contents 1 Electrical ratings ............................................................................. 3 2 Electrical characteristics ................................................................ 4 2.1 Electrical characteristics (curves) ...................................................... 7 3 Test circuits ................................................................................... 10 4 Package information ..................................................................... 11 5 2/30 4.1 DPAK (TO-263) type A package information ................................. 11 4.2 DPAK (TO-263) type B package information ................................. 14 4.3 DPAK (TO-252) type A package information................................... 17 4.4 TO-220FP package information ...................................................... 20 4.5 TO-220 type A package information................................................ 22 4.6 DPAK (TO-263) type A packing information .................................. 24 4.7 DPAK (TO-263) type B packing information .................................. 26 4.8 DPAK (TO-252) type A tape packing information ............................ 27 Revision history ............................................................................ 29 DocID11423 Rev 7 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD 1 Electrical ratings Electrical ratings Table 2: Absolute maximum ratings Value Symbo l VCES Parameter Unit DPAK, TO-220 DPAK Collector-emitter voltage (VGE = 0 V) IC(1) TO-220FP 600 V Continuous collector current at TC = 25 C 20 9 A Continuous collector current at TC = 100 C 10 6 A (2) Turn-off latching current 30 A ICP(3) Pulsed collector current 30 A VGE Gate-emitter voltage 20 V Diode RMS forward current at Tc=25C 10 A IFSM Surge non repetitive forward current tp = 10 ms sinusoidal 20 A PTOT Total dissipation at TC = 25 C VISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1 s;TC=25 C) tscw Short-circuit withstand time VCE = 0.5 VCES, Tj = 125 C, RG = 10 , VGE = 12 V Tstg Storage temperature range TJ Operating junction temperature range ICL IF 62 65 25 W 2500 V 10 s - 55 to 150 C Notes: (1)Calculated (2)V = 80 % VCES, VGE = 15 V, RG = 10 , TJ = 150 C. clamp (3)Pulse according to the iterative formula: width limited by maximum junction temperature and turn-off within RBSOA. Table 3: Thermal data Value Symbol Parameter Unit TO-220, DPAK DPAK TO-220FP Rthj-case Thermal resistance junction-case IGBT 1.9 2 5 Rthj-case Thermal resistance junction-case diode 4 4.5 7 Rthj-amb Thermal resistance junction-ambient 62.5 100 62.5 DocID11423 Rev 7 C/W 3/30 Electrical characteristics 2 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Electrical characteristics TC = 25 C unless otherwise specified Table 4: Static characteristics Symbol Parameter Test conditions V(BR)CES Collector-emitter breakdown voltage VCE(sat) Collector-emitter saturation voltage VGE(th) Gate threshold voltage ICES Collector cut-off current IGES Gate-emitter leakage current VGE = 20 V gfs(2) Forward transconductance VCE = 15 V, IC= 5 A IC = 1 mA, VGE = 0 V Min. Typ. 600 Unit V VGE =15 V, IC = 5 A 2.2 VGE = 15 V, IC = 5 A, Tj= 125 C 1.8 VCE = VGE, IC = 250 A Max. 4.5 2.5 V 6.5 V VCE = 600 V, VGE = 0 V 150 A VCE=600 V, VGE = 0 V, Tj = 125 C (1) 1 mA 100 nA 15 S Notes: (1)Defined (2)Pulse by design, not subject to production test. test: pulse duration < 300 s, duty cycle < 2 %. Table 5: Dynamic characteristics Symbol 4/30 Parameter Cies Input capacitance Coes Output capacitance Cres Reverse transfer capacitance Qg Total gate charge Qge Gate-emitter charge Qgc Gate-collector charge Test conditions VCE= 25 V, f = 1 MHz, VGE = 0 V VCE = 390 V, IC = 5 A, VGE = 0 to 15 V (see Figure 19: " Gate charge test circuit") DocID11423 Rev 7 Min. Typ. Max. - 380 - - 46 - - 8.5 - - 19 - - 5 - - 9 - Unit pF nC STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Electrical characteristics Table 6: Switching on/off (inductive load) Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope tr(Voff) Off voltage rise time td(off) Turn-off delay time tf Current fall time tr(Voff) Off voltage rise time td(off) Turn-off delay time tf Test conditions Current fall time Min. Typ. Max. Unit VCC = 390 V, IC = 5 A, RG = 10 , VGE = 15 V (see Figure 18: " Test circuit for inductive load switching" and Figure 20: " Switching waveform") - 17 - ns - 6 - ns - 655 - A/s VCC = 390 V, IC = 5 A, RG = 10 , VGE = 15 V, Tj=125C (see Figure 18: " Test circuit for inductive load switching" and Figure 20: " Switching waveform") - 16.5 - ns - 6.5 - ns - 575 - A/s VCC = 390 V, IC = 5 A, RG = 10 , VGE = 15 V (see Figure 18: " Test circuit for inductive load switching" and Figure 20: " Switching waveform") - 33 - ns - 72 - ns - 82 - ns VCC = 390 V, IC = 5 A, RG = 10 , VGE = 15 V, Tj=125 C (see Figure 18: " Test circuit for inductive load switching" and Figure 20: " Switching waveform") - 60 - ns - 106 - ns - 136 - ns Test conditions Min. Typ. Max. Unit VCC = 390 V, IC = 5 A, RG = 10 , VGE = 15 V (see Figure 18: " Test circuit for inductive load switching") - 55 - J - 85 - J - 140 - J VCC = 390 V, IC = 5 A, RG = 10 , VGE = 15 V, Tj=125C (see Figure 18: " Test circuit for inductive load switching") - 87 - J - 162 - J - 249 - J Table 7: Switching energy (inductive load) Symbol Parameter Eon(1) Turn-on switching energy Eoff(2) Turn-off switching energy Ets Total switching energy Eon(1) Turn-on switching energy Eoff(2) Turn-off switching energy Ets Total switching energy Notes: (1)Including the reverse recovery of the diode. (2)Including the tail of the collector current. DocID11423 Rev 7 5/30 Electrical characteristics STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Table 8: Collector-emitter diode Symbol 6/30 Parameter VF Forward on-voltage Test conditions trr Reverse recovery time Qrr Reverse recovery charge Irrm Reverse recovery current trr Reverse recovery time Qrr Reverse recovery charge Irrm Reverse recovery current Min. Typ. Max. Unit IF=5 A - 2 - V IF=5 A, Tj=125 C - 1.6 - V - 22 - ns - 14 - nC - 1.3 - A - 35 - ns - 40 - nC - 2.2 - A IF=5 A, VR=40 V, di/dt=100 A/s (see Figure 21: " Diode reverse recovery waveform") IF=5 A, VR=40 V, Tj=125 C, di/dt=100 A/s (see Figure 21: " Diode reverse recovery waveform") DocID11423 Rev 7 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD 2.1 Electrical characteristics Electrical characteristics (curves) Figure 2: Output characteristics Figure 3: Transfer characteristics Figure 4: Transconductance Figure 5: Collector-emitter on voltage vs temperature Figure 6: Collector-emitter on voltage vs temperature DocID11423 Rev 7 Figure 7: Capacitance variations 7/30 Electrical characteristics STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Figure 8: Normalized gate threshold voltage vs temperature Figure 9: Collector-emitter on voltage vs collector current Figure 10: Normalized breakdown voltage vs temperature Figure 11: Switching energy vs temperature Figure 12: Switching energy vs gate resistance 8/30 Figure 13: Switching energy vs collector current DocID11423 Rev 7 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Electrical characteristics Figure 14: Thermal impedance for DPAK, DPAK and TO-220 Figure 15: Turn-off SOA Figure 16: Emitter-collector diode characteristics Figure 17: Thermal impedance for TO-220FP DocID11423 Rev 7 9/30 Test circuits 3 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Test circuits Figure 18: Test circuit for inductive load switching C A Figure 19: Gate charge test circuit A L=100 H G E B B 3.3 F C G + RG VCC 1000 F D.U.T E - AM01504v 1 Figure 20: Switching waveform Figure 21: Diode reverse recovery waveform di/dt Qrr trr IF ts tf t IRRM 10% IRRM VRRM dv/dt AM01507v1 10/30 DocID11423 Rev 7 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD 4 Package information Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. 4.1 DPAK (TO-263) type A package information Figure 22: DPAK (TO-263) type A package outline DocID11423 Rev 7 11/30 Package information STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Table 9: DPAK (TO-263) type A package mechanical data mm Dim. Min. Max. A 4.40 4.60 A1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 D 8.95 9.35 D1 7.50 7.75 8.00 D2 1.10 1.30 1.50 E 10.00 E1 8.50 8.70 8.90 E2 6.85 7.05 7.25 e 10.40 2.54 e1 4.88 5.28 H 15.00 15.85 J1 2.49 2.69 L 2.29 2.79 L1 1.27 1.40 L2 1.30 1.75 R V2 12/30 Typ. 0.40 0 DocID11423 Rev 7 8 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Package information Figure 23: DPAK (TO-263) type A recommended footprint (dimensions are in mm) DocID11423 Rev 7 13/30 Package information 4.2 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD DPAK (TO-263) type B package information Figure 24: DPAK (TO-263) type B package outline 0079457_23_B 14/30 DocID11423 Rev 7 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Package information Table 10: DPAK (TO-263) type B mechanical data mm Dim. Min. Typ. Max. A 4.36 4.56 A1 0 0.25 b 0.70 0.90 b1 0.51 0.89 b2 1.17 1.37 b3 1.36 1.46 c 0.38 0.694 c1 0.38 0.534 c2 1.19 1.34 D 8.60 9.00 D1 6.90 7.50 E 10.15 10.55 E1 8.10 e 8.70 2.54 BSC H 15.00 15.60 L 1.90 2.50 L1 1.65 L2 1.78 L3 L4 0.25 4.78 DocID11423 Rev 7 5.28 15/30 Package information STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Figure 25: DPAK (TO-263) type B recommended footprint (dimensions are in mm) 16/30 DocID11423 Rev 7 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD 4.3 Package information DPAK (TO-252) type A package information Figure 26: DPAK (TO-252) type A package outline DocID11423 Rev 7 17/30 Package information STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Table 11: DPAK (TO-252) type A mechanical data mm Dim. Min. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 4.95 E 6.40 E1 4.60 4.70 4.80 e 2.16 2.28 2.40 e1 4.40 4.60 H 9.35 10.10 L 1.00 1.50 (L1) 2.60 2.80 3.00 L2 0.65 0.80 0.95 L4 0.60 R V2 18/30 Typ. 5.10 5.25 6.60 1.00 0.20 0 DocID11423 Rev 7 8 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Package information Figure 27: DPAK (TO-252) type A recommended footprint (dimensions are in mm) DocID11423 Rev 7 19/30 Package information 4.4 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD TO-220FP package information Figure 28: TO-220FP package outline 7012510_Rev_12_B 20/30 DocID11423 Rev 7 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Package information Table 12: TO-220FP package mechanical data mm Dim. Min. Typ. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 DocID11423 Rev 7 21/30 Package information 4.5 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD TO-220 type A package information Figure 29: TO-220 type A package outline 22/30 DocID11423 Rev 7 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Package information Table 13: TO-220 type A package mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.55 c 0.48 0.70 D 15.25 D1 15.75 1.27 E 10.00 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13.00 14.00 L1 3.50 3.93 L20 16.40 L30 28.90 oP 3.75 3.85 Q 2.65 2.95 DocID11423 Rev 7 23/30 Package information 4.6 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD DPAK (TO-263) type A packing information Figure 30: D2PAK type A tape outline 24/30 DocID11423 Rev 7 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Package information Figure 31: D2PAK type A reel outline Table 14: DPAK type A tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. Min. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 Max. 330 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base quantity 1000 P2 1.9 2.1 Bulk quantity 1000 R 50 T 0.25 0.35 W 23.7 24.3 DocID11423 Rev 7 13.2 26.4 30.4 25/30 Package information 4.7 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD DPAK (TO-263) type B packing information Figure 32: D2PAK type B tape outline Figure 33: D2PAK type B reel outline 26/30 DocID11423 Rev 7 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Package information Table 15: DPAK type B reel mechanical data mm Dim. Min. A 330 B 1.5 C 12.8 D 20.2 G 24.4 N 100 T 4.8 Max. 13.2 26.4 30.4 DPAK (TO-252) type A tape packing information Figure 34: DPAK (TO-252) tape outline DocID11423 Rev 7 27/30 Package information STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD Figure 35: DPAK (TO-252) reel outline Table 16: DPAK (TO-252) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 28/30 Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 DocID11423 Rev 7 18.4 22.4 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD 5 Revision history Revision history Table 17: Document revision history Date Revision Changes 14-Jun-2005 1 First release. 19-Jul-2005 2 Complete version. 27-Jan-2006 3 Inserted ecopack indication. 01-Mar-2006 4 The document has been reformatted. 08-Feb-2007 5 Modified value on Table 6.: Switching on/off (inductive load). 24-Nov-2009 6 Inserted DPAK package option. 06-Jun-2017 7 Modified part numbers on cover page. Updated Section 4: "Package information". Minor text changes. DocID11423 Rev 7 29/30 STGB10NC60KDT4, STGD10NC60KDT4, STGF10NC60KD, STGP10NC60KD IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2017 STMicroelectronics - All rights reserved 30/30 DocID11423 Rev 7