Compact
Power
Connectors Positronic Industries
connectpositronic.com
PCIH SERIES
12
DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
13
2441
40
39
35 38
3734
3229 3128
27 30 33 36
2623 2522
21 24
15 17 1911 13
16 18 2012 14
579
6810 42
44
43
47
46
45
47
46
45
44
43
42
36
38
37 30
32
31
33
35
34 27 24
29
28 26
25 21
23
22
41
40
39
18 16 14 12
11131517
810 6
57919
20
13
42 3327 32
31
30
28
29
24 25
26
23
22
21
19
20
1715
1816
1311
1412
795
1086 34
35
37
38 36
34
35 38
37
36 31 28 22 19
25
32 29 23 20
26 212430 2733 17 15 13 11
18 16 14 12
7 5
8 610
9
42
13
3 1
4 2
31
2 4
1911975
6810 12
1713 15
14 16 18 20
36
38
37
21
23
22 26
24
25 29 32
27
28 30
31 35
33
34 41
39
40 44
42
43 45
46 18
17
47
47
46
45
42
44
43 38
36
37
39
40
41
33
35
34
20
29
27
28
30
32
31 24
26
25 19
21
23
22
10
9
1216 14
1315 11
468
57 3
2
1
48
49 48
49
The PCIH series was developed specifically for use with CompactPCI®in-rack modular power supplies. The pack-
age size is ideal for use in all 3U and 6U based platforms. The PCIH series is an excellent choice in IEEE 1101.1,
IEEE 1101.10, and VITA 30 applications where system power requirements have exceeded the capabilities of com-
monly used power connectors.
The PCIH47 variant is fully compliant to the PICMG®2.11 Power Interface Specification. This Specification details
standardized power for use with CompactPCI®systems. Visit www.picmg.com for details.
PCIH38 VARIANT PCIH38R VARIANT (Inverted Termination)
PCIH47R VARIANT (Inverted Termination)
PCIH47 VARIANT
PCIH SERIES CONTACT VARIANTS
FACE VIEW OF MALE AND REAR VIEW OF FEMALE
23 Size 16 Power Contacts and 15 Size 20 Signal Contacts
PCIH49W25 VARIANT PCIH49W25R VARIANT
23 Size 16 Power Contacts and 24 Size 22 Signal Contacts
25 Size 16 Power Contacts and 24 Size 22 Signal Contacts
GENERAL
PRODUCT INFORMATION
MATERIALS AND FINISHES:
Insulator: Glass-filled polyester, UL 94V-0,
blue color.
Contacts: Size 16 contacts: High conduc-
tivity precision-machined
copper alloy. Size 20 and 22
contacts: Precision-machined
copper alloy. Plating: gold flash
over nickel. Other plating
options available, refer to
Step 7 on page 36.
Mounting Screws: Steel, zinc plated.
ELECTRICAL CHARACTERISTICS:
PCIH Contact Current Ratings, per UL 1977
See Temperature Rise Curves on page 4 for details.
PCIH38:
Size 16 Power Contacts:
Positions 36, 37, and 38: 40 amperes continuous,
all contacts under load.
Positions 1 - 20: 28 amperes continuous,
all contacts under load.
Size 20 Signal Contacts: 5 amperes nominal rating.
PCIH47:
Size 16 Power Contacts:
Positions 45, 46, and 47: 40 amperes continuous,
all contacts under load.
Positions 1 - 20: 28 amperes continuous,
all contacts under load.
Size 22 Signal Contacts: 3 amperes nominal rating.
PCIH49:
Size 16 Power Contacts:
Positions 45 through 49: 37 amperes continuous,
all contacts under load.
Positions 1 - 20: 28 amperes continuous,
all contacts under load.
Size 22 Signal Contacts: 3 amperes nominal rating.
Initial Contact Resistance; maximum:
Size 16 Contact: 0.0007 ohms maximum.
Size 20 Contact: 0.004 ohms maximum.
Size 22 Contact: 0.004 ohms maximum.
Per IEC 512-2, Test 2b.
Insulator Resistance: 5 G ohms per IEC 512-2,
Test 3a.
Voltage Proof:
PCIH38:
Contacts 36, 37 and 38: 3,000 V r.m.s.
Contacts 1 through 20: 1,500 V r.m.s.
Contacts 21 through 35: 1,000 V r.m.s.
PCIH47:
Contacts 45, 46, and 47: 3,000 V r.m.s.
Contacts 1 through 20: 1,500 V r.m.s.
Contacts 21 through 44: 1,000 V r.m.s.
PCIH49:
Contacts 1 through 20: 1,500 V r.m.s.
Contacts 45 through 49: 1,500 V r.m.s.
Contacts 21 through 44: 1,000 V r.m.s.
Creepage and Clearance Distance; minimum:
PCIH38:
Contact 38 to Contact 36: 3.2mm [0.126 inch]
Contact 37 to Contact 36: 3.2mm [0.126 inch]
Contact 38 to Signal Contacts: 6.4mm [0.252 inch]
Contact 37 to Signal Contacts: 6.4mm [0.252 inch]
Contact 38 to Contact 37: 2.5mm [0.098 inch]
Contact 36 to Signal Contacts: 2.0mm [0.079 inch]
PCIH47:
Contact 47 to Contact 45: 3.2mm [0.126 inch]
Contact 46 to Contact 45: 3.2mm [0.126 inch]
Contact 47 to Signal Contacts: 6.4mm [0.252 inch]
Contact 46 to Signal Contacts: 6.4mm [0.252 inch]
Contact 47 to Contact 46: 2.5mm [0.098 inch]
Contact 45 to Signal Contacts: 2.0mm [0.079 inch]
PCIH47:
Contact 36 to Signal Contacts: 2.0mm [0.079 inch]
Working Voltage:
PCIH38:
Contacts 36, 37 and 38: 1,000 V r.m.s.
Contacts 1 through 20: 500 V r.m.s.
Contacts 21 through 35: 333 V r.m.s.
PCIH47:
Contacts 45, 46, and 47: 1,000 V r.m.s.
Contacts 1 through 20: 500 V r.m.s.
Contacts 21 through 44: 333 V r.m.s.
PCIH49:
Contacts 1 through 20: 500 V r.m.s.
Contacts 45 through 49: 500 V r.m.s.
Contacts 21 through 44: 333 V r.m.s.
MECHANICAL CHARACTERISTICS:
Blind Mating System: Male and female connector
bodies provide “lead-in” for 1.3
mm [0.050 inch] diametral mis-
alignment.
Polarization: Provided by connector body
design.
Removable Contacts: Install contact from rear of
insulator; release from front of
insulator. Size 16, 20 and 22
female contacts feature
“Closed Entry” design for
highest reliability.
Removable Contact Retention
in Connector Body:
Size 16 Contacts: 67 N [15 lbs.]
Size 20 Contacts: 45 N [10 lbs.]
Size 22 Contacts: 27 N [6 lbs.]
Fixed Contacts: Printed board terminations,
both straight and right angle
(90º). Size 16 female contacts
feature “Closed Entry” design.
Size 20 and 22 feature rugged
“Robi-D Open Entry” contact
design. “Closed Entry” contacts
available, consult Technical
Sales.
13 DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Compact
Power
Connectors
Positronic Industries
connectpositronic.com
PCIH SERIES
13 DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
TECHNICAL
CHARACTERISTICS
Compact
Power
Connectors Positronic Industries
connectpositronic.com
PCIH SERIES
14
DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Fixed Contact Retention
in Connector Body:
Size 16 Contacts: 45 N [10 lbs.]
Size 20 and 22 Contacts: 27 N [6 lbs.]
Resistance to Solder Heat: 260˚C [500˚F] for 10 seconds
duration per IEC 512-6, Test
12e, 25-watt soldering iron.
Sequential Contact Mating System:
PCIH38: First mate contact 36 and last
mate contact positions 22, 25
and 28.
PCIH47 and
PCIH49 with MOS: First mate contact 45 and last
mate contact position 27.
Consult Technical Sales for customer specified sequential mating.
Safety “Recessed in
Insulator” Contacts: The following size 16 contacts
are recessed 5mm [0.197 inch]
below the face of the female
connector insulator per safety
requirements.
PCIH38: Contact positions 37 and 38.
PCIH47 and
PCIH49 with MOS: Contact positions 46 and 47.
Compliant Terminations: Size 16, 20 and 22 contacts are
available with Compliant
Contact Terminations.
Printed Board
and Panel Mounting: Mounting holes provided in
connector body for both printed
board and panel mounting.
Self-tapping screws are
available.
Mechanical Operations: 250 couplings, minimum.
CLIMATIC CHARACTERISTICS:
Working Temperature: -55˚C to +125˚C.
U.L. Recognized File #E49351
CSA Recognized File #LR54219
TUV Recognized File #215/99
P
O
S
I
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
•
p
e
r
E
U
D
i
r
e
c
t
i
v
e
2
0
0
2
/
9
5
/
E
C
•
RoHS
RoHS
Compliant
For RoHS options
see page 36.
TECHNICAL
CHARACTERISTICS
15 DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Compact
Power
Connectors
Positronic Industries
connectpositronic.com
PCIH SERIES
24.53
[0.966] REF.
22.30
[0.878] REF.
19.70
[0.776] REF.
17.47
[0.688] REF.
PCIH CONNECTOR MATING DIMENSIONS
(FULLY MATED)
Straight Board
Mount Male to Straight
Board Mount or Panel
Mount Female
Straight Board
Mount Male to
Right Angle (90º)
Board Mount Female
Right Angle (90º) Board
Mount Male to Straight
Board Mount or Panel
Mount Female
Right Angle (90º)
Board Mount Male to
Right Angle (90º)
Board Mount Female
18.51 [0.729] 18.71 [0.736]
2X ø2.54 [ø0.100]
88.00 [3.465] 2X ø2.54 [ø0.100]
12.54 [0.494] 12.54 [0.494]
88.00 [3.465]
93.82 [3.694]
7.04 [0.277]
93.82 [3.694]
6.02 [0.237]
2X ø2.54 [ø0.100]
13.68 [0.539] 16.48 [0.649]
17.49 [0.689] 20.29 [0.799]
91.03 [3.584] 91.04 [3.584]
85.00 [3.346] 2X ø2.54 [ø0.100] 85.00 [3.346]
12.54+0.13-0.38
[0.494+0.005-0.015]
12.54+0.13-0.38
[0.494+0.005-0.015]
MALE CONNECTOR FEMALE CONNECTOR
PCIH CONNECTOR OUTLINE DIMENSIONS
RIGHT ANGLE (90º) BOARD MOUNT CONNECTOR
STRAIGHT BOARD MOUNT CONNECTOR
SEE PAGE 29 FOR PANEL MOUNT CONNECTOR DIMENSIONS.
MALE CONNECTOR FEMALE CONNECTOR
CONNECTOR OUTLINE AND
MATING DIMENSIONS
2X Size 16 Contacts
5 mm Recess
15X ø0.61 [0.024]
16.19 [0.637]
(See page 23)
r
dered separately
Crimp Contacts
3X ø4.19 [0.165]
C'BORE
6.32 [0.249]
12.00 [0.472]
2.125 [0.0837]
4.25 [0.167]
2.83 [0.111]
2X 6.85 [0.270]
2X 2.50 [0.098]
9X
4.25 [0.167]
1.00 [0.039]
2.00 [0.079]
4.25 [0.167]
2X
44.00 [1.732]
8X 4.00 [0.157]
17.19 [0.677]
High Profile A.C.
Pass-Through,
Cutout
35X
4.50 [0.177]
20X ø1.14 [0.045]
CONTACT HOLE PATTERN
CONNECTOR DIMENSIONS
FEMALE STRAIGHT SOLDER CONNECTOR WITH A.C. PASS-THROUGH
CODE 3 WITH MOS*-245.0
CRIMP CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY
HIGH PROFILE PART NUMBER
PCIH38F300A1-245.0 * For MOS descriptions,
see chart on pages 111-112.
Crimp contacts
ordered separately
(see pages 102-103)
Compact
Power
Connectors Positronic Industries
connectpositronic.com
PCIH SERIES
16
DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
2.125 [0.0837]
4.25 [0.167]
9X 4.25 [0.167]
1.00 [0.039]
27.50 [1.083]
32.50 [1.280]
37.50 [1.476]
2X 2.50 [0.098]
2X Size 16 Contacts
5 mm Min. Recess
8X 4.00 [0.157]
2.00 [0.079]
2X
44.00 [1.732]
4.25 [0.167]
38X 4.50 [0.177]
23X ø1.14 [0.045]
15X ø0.61 [0.024]
CONNECTOR DIMENSIONS
FEMALE STRAIGHT SOLDER CONNECTOR
CODE 3
STANDARD PART NUMBER
PCIH38F300A1
CONTACT HOLE PATTERN
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø1.00 [0.039] holes for size 20 and size 22 contact holes.
Suggest Ø1.60 [0.063] holes for size 16 contact holes.
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
Note: See below for suggested printed board hole sizes.
STRAIGHT SOLDER
CONNECTOR, FEMALE
17 DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Compact
Power
Connectors
Positronic Industries
connectpositronic.com
PCIH SERIES
3X ø3.30 [0.130] Minimum
A.C. Pass-Through Holes
35X 4.50 [0.177]
2X Size 16 Contacts
5 mm Recess
C
r
i
mp
C
on
t
ac
t
s
ordered separately
(See page 23) 20X ø1.14 [0.045]
15X ø0.61 [0.024]
2.125 [0.0837]
4.25 [0.167]
9X
4.25 [0.167]
1.00 [0.039]
27.50 [1.083]
32.50 [1.280]
37.50 [1.476]
2X 2.50 [0.098]
2.00 [0.079]
8X 4.00 [0.157]
2X
44.00 [1.732]
4.25 [0.167]
CONNECTOR DIMENSIONS CONTACT HOLE PATTERN
FEMALE STRAIGHT SOLDER CONNECTOR WITH A.C. PASS-THROUGH
CODE 3 WITH MOS*-246.1
CRIMP CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY
LOW PROFILE PART NUMBER
PCIH38F300A1-246.1
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø1.00 [0.039] holes for size 20 and size 22 contact holes.
Suggest Ø1.60 [0.063] holes for size 16 contact holes.
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
Note: See below for suggested printed board hole sizes.
STRAIGHT SOLDER
CONNECTOR, FEMALE
0.20
[0.008] 2.125 [0.0837]
37.70 [1.484]
32.65 [1.285]
27.60 [1.087]
9X 4.20 [0.165]
2X Size 16 Contacts
5 mm Min. Recess
2X 2.70 [0.106] 2X
44.00 [1.732]
7X 2.70 [0.106]
4.10 [0.161]
4.25 [0.167]
47X 4.50 [0.177]
23X ø1.14 [0.045]
24X ø0.61 [0.024]
FEMALE STRAIGHT SOLDER CONNECTOR
CODE 3
STANDARD PART NUMBER
PCIH47F300A1
CONTACT HOLE PATTERN
CONNECTOR DIMENSIONS
Crimp contacts
ordered separately
(see pages 102-103)
* For MOS descriptions,
see chart on pages 111-112.
Compact
Power
Connectors Positronic Industries
connectpositronic.com
PCIH SERIES
18
DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
3X ø3.30 [0.130] Minimum
A.C. Pass-Through Holes
44X 4.50 [0.177]
2X Size 16 Contacts
5 mm Recess
Crimp Contacts
ordered separately
(See page 23)
24X ø0.61 [0.024]
20X ø1.14 [0.045]
0.20
[0.008]
9X
4.20 [0.165]
27.60 [1.087]
32.65 [1.285]
37.70 [1.484]
4.25 [0.167]
2.125 [0.0837]
2X
44.00 [1.732]
4.10 [0.161]
7X 2.70 [0.106]
2X 2.70 [0.106]
FEMALE STRAIGHT SOLDER CONNECTOR WITH A.C. PASS-THROUGH
CODE 3 WITH MOS*-246.0
CRIMP CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY
LOW PROFILE PART NUMBER
PCIH47F300A1-246.0
CONTACT HOLE PATTERN
CONNECTOR DIMENSIONS
5X ø3.30 [0.130] Minimum
A.C. Pass-Through Holes
44X 4.50 [0.177]
24X ø0.61 [0.024]
Crimp Contacts
ordered separately
(See page 23) 20X ø1.14 [0.045]
32.65 [1.285]
37.70 [1.484]
7X 2.70 [0.106]
2X 44.00 [1.732]
2.13 [0.084]
4.25 [0.167]
27.60 [1.087]
2X 2.70 [0.106]
9X
4.20 [0.165]
4.10 [0.161]
0.20
[0.008]
4X Size 16 Contacts
5 mm Recess
CONNECTOR DIMENSIONS
CONTACT HOLE PATTERN
Note: See below for suggested printed board hole sizes.
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø1.00 [0.039] holes for size 20 and size 22 contact holes.
Suggest Ø1.60 [0.063] holes for size 16 contact holes.
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
FEMALE STRAIGHT SOLDER CONNECTOR WITH A.C. PASS-THROUGH
CODE 3 WITH MOS*-246.3
CRIMP CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY
LOW PROFILE PART NUMBER
PCIH49W25F300A1-246.3
STRAIGHT SOLDER
CONNECTOR, FEMALE
Crimp contacts
ordered separately
(see pages 102-103)
Crimp contacts
ordered separately
(see pages 102-103)
* For MOS descriptions,
see chart on pages 111-112.
* For MOS descriptions,
see chart on pages 111-112.
19 DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Compact
Power
Connectors
Positronic Industries
connectpositronic.com
PCIH SERIES
37.70 [1.484]
32.65 [1.285]
27.60 [1.087]
9X 4.20 [0.165]
2.125 [0.0837]
0.20
[0.008]
2X 2.70 [0.106] 4.10 [0.161]
7X 2.70 [0.106]
2X 44.00 [1.732]
4.25 [0.167]
49X 4.50 [0.177]
24X ø0.61 [0.024]
25X ø1.14 [0.045]
4X Size 16 Contacts
5mm Recessed Min.
FEMALE STRAIGHT SOLDER CONNECTOR
CODE 3 WITH MOS*-379.0
STANDARD PART NUMBER
PCIH49W25F300A1-379.0
CONTACT HOLE PATTERN
CONNECTOR DIMENSIONS
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø1.00 [0.039] holes for size 20 and size 22 contact holes.
Suggest Ø1.60 [0.063] holes for size 16 contact holes.
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
Note: See below for suggested printed board hole sizes.
STRAIGHT SOLDER
CONNECTOR, FEMALE
* For MOS descriptions,
see chart on pages 111-112.
Compact
Power
Connectors Positronic Industries
connectpositronic.com
PCIH SERIES
20
DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
2X 2.70 [0.106]
37.70 [1.484]
27.60 [1.087]
2.125 [0.0837]
4.25 [0.167]
Second Mate
7X 2.70 [0.106]
4.10 [0.161]
Position 27
Last to
Mate Signal
2X
44.00 [1.732]
32.65 [1.285]
23X ø1.14 [0.045]
24X ø0.61 [0.024]
47X 4.50 [0.177]
First Mate
9X 4.20 [0.165] 0.20
[0.008]
Position 22,25,28
Last to
Mate Signal
37.50 [1.476]
32.50 [1.280]
27.50 [1.083]
1.00 [0.039]
2X
44.00 [1.732]
8X 4.00 [0.157]
2.00 [0.079]
4.25 [0.167]
9X 4.25 [0.167]
2.125 [0.0837]
4.25 [0.167]
Second Mate
First Mate
15X ø0.61 [0.024]
23X ø1.14 [0.045] 38X 4.50 [0.177]
2X 2.50 [0.098]
MALE STRAIGHT SOLDER CONNECTOR
CODE 3
STANDARD PART NUMBER
PCIH38M300A1
MALE STRAIGHT SOLDER CONNECTOR
CODE 3
STANDARD PART NUMBER
PCIH47M300A1
CONTACT HOLE PATTERN
CONTACT HOLE PATTERN
CONNECTOR DIMENSIONS
CONNECTOR DIMENSIONS
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø1.00 [0.039] holes for size 20 and size 22 contact holes.
Suggest Ø1.60 [0.063] holes for size 16 contact holes.
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
Note: See below for suggested printed board hole sizes.
STRAIGHT SOLDER
CONNECTOR, MALE
21 DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Compact
Power
Connectors
Positronic Industries
connectpositronic.com
PCIH SERIES
Position 27
Last to
Mate Signal
32.65 [1.285]
2X
44.00 [1.732]
0.20
[0.008]
Positions 46, 47, 48, 49
Second Mate
Position 45
First Mate
25X ø1.14 [0.045]
24X ø0.61 [0.024]
49X 4.50 [0.177]
27.60 [1.087]
9X 4.20 [0.165] 2X 2.70 [0.106]
4.25 [0.167]
2.125 [0.0837] 4.10 [0.161]
7X 2.70 [0.106]
37.70 [1.484]
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø1.00 [0.039] holes for size 20 and size 22 contact holes.
Suggest Ø1.60 [0.063] holes for size 16 contact holes.
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
CONTACT HOLE PATTERN
MALE STRAIGHT SOLDER CONNECTOR
CODE 3 WITH MOS*-378.0
STANDARD PART NUMBER
PCIH49W25M300A1-378.0
CONNECTOR DIMENSIONS Note: See below for suggested printed board hole sizes.
STRAIGHT SOLDER
CONNECTOR, MALE
* For MOS descriptions,
see chart on pages 111-112.
Compact
Power
Connectors Positronic Industries
connectpositronic.com
PCIH SERIES
22
DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
2X
42.50 [1.673]
12.59 [0.496]
10.09 [0.397]
7.59 [0.299]
2.00 [0.079]
4.25 [0.167]
32.50 [1.280]
12.21 [0.481]
7.96 [0.313]
2X Size 16 Contacts
5 mm Min. Recess
15X
ø0.71 [0.028]
23X
ø1.60 [0.063]
2X
42.50 [1.673]
38X
2.68 [0.106]
8X
4.00 [0.157]
23X
Ø1.60 [0.063]
15X
ø0.71 [0.028]
PCIH38F400A1
37.50 [1.476]
14.71±0.65
[0.579±0.026]
27.50 [1.083]
1.00 [0.039]
9X 4.25 [0.167]
INVERTED PART NUMBER:
38X
2.68 [0.106]
2X Size 16 Contacts
5 mm Min. Recess
37.50 [1.476]
32.50 [1.280]
27.50 [1.083]
1.00 [0.039]
9X 4.25 [0.167]
12.21 [0.481]
7.96 [0.313]
12.59 [0.496]
10.09 [0.397]
2.00 [0.079]
4.25 [0.167]
8X 4.00 [0.157]
7.59 [0.299]
14.71±0.65
[0.579±0.026]
FEMALE RIGHT ANGLE (90º) BOARD MOUNT CONNECTOR
CODE 4
STANDARD PART NUMBER
PCIH38F400A1
CONTACT HOLE PATTERN
CONNECTOR DIMENSIONS
CONNECTOR DIMENSIONS
CONTACT HOLE PATTERN
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø1.14 [0.045] holes for size 20 contact holes.
Suggest Ø2.03 [0.080] holes for size 16 contact holes.
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
Note: See below for suggested printed board hole sizes.
RIGHT ANGLE (90º)
BOARD MOUNT CONNECTOR, FEMALE
FEMALE RIGHT ANGLE (90º) BOARD MOUNT CONNECTOR
CODE 4
PART NUMBER FOR INVERTED TERMINATION
PCIH38RF400A1
23 DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Compact
Power
Connectors
Positronic Industries
connectpositronic.com
PCIH SERIES
24X
ø0.71 [0.028]
23X
ø1.60 [0.063]
7.39 [0.291]
10.09 [0.397]
12.79 [0.504]
37.70 [1.484]
32.65 [1.285]
27.60 [1.087]
9X 4.20 [0.165]
7.96 [0.313]
2X Size 16 Contacts
5 mm Min. Recess
47X
2.68 [0.106]
24X
ø0.71 [0.028]
2X
42.50 [1.673]
7X
2.70 [0.106]
4.10 [0.161]
12.21 [0.481]
14.71±0.65
[0.579±0.026]
0.20
[0.008]
PCIH47F400A1
INVERTED PART NUMBER:
47X
2.68 [0.106]
23X
ø1.60 [0.063]
7.96 [0.313]
12.21 [0.481]
37.70 [1.484]
32.65 [1.285]
27.60 [1.087]
9X 4.20 [0.165]
12.79 [0.504]
10.09 [0.397]
7.39 [0.291]
2X 42.50 [1.673]
7X 2.70 [0.106]
4.10 [0.161]
0.20
[0.008]
14.71±0.65
[0.579±0.026]
2X Size 16 Contacts
5 mm Min. Recess
CONNECTOR DIMENSIONS
CONNECTOR DIMENSIONS
FEMALE RIGHT ANGLE (90º) BOARD MOUNT CONNECTOR
CODE 4
STANDARD PART NUMBER
PCIH47F400A1
CONTACT HOLE PATTERN
CONTACT HOLE PATTERN
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø1.14 [0.045] holes for size 22 contact holes.
Suggest Ø2.03 [0.080] holes for size 16 contact holes.
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
Note: See below for suggested printed board hole sizes.
FEMALE RIGHT ANGLE (90º) BOARD MOUNT CONNECTOR
CODE 4
PART NUMBER FOR INVERTED TERMINATION
PCIH47RF400A1
RIGHT ANGLE (90º)
BOARD MOUNT CONNECTOR, FEMALE
Compact
Power
Connectors Positronic Industries
connectpositronic.com
PCIH SERIES
24
DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
24X
ø0.71 [0.028]
44X
2.68 [0.106]
20X
ø1.60 [0.063]
7.96 [0.313]
12.21 [0.481]
37.70 [1.484]
32.65 [1.285]
27.60 [1.087]
9X 4.20 [0.165]
12.79 [0.504]
10.09 [0.397]
7.39 [0.291]
2X 42.50 [1.673]
7X 2.70 [0.106]
4.10 [0.161]
0.20
[0.008]
14.71±0.65
[0.579±0.026]
2X Size 16 Contacts
5 mm Min. Recess
20X
ø1.60 [0.063]
7.39 [0.291]
10.09 [0.397]
12.79 [0.504]
37.70 [1.484]
32.65 [1.285]
27.60 [1.087]
9X 4.20 [0.165]
7.96 [0.313]
2X Size 16 Contacts
5 mm Min. Recess
44X
2.68 [0.106]
24X
ø0.71 [0.028]
2X
42.50 [1.673]
7X
2.70 [0.106]
4.10 [0.161]
12.21 [0.481]
14.71±0.65
[0.579±0.026]
0.20
[0.008]
CONTACT HOLE PATTERN
CONTACT HOLE PATTERN
CONNECTOR DIMENSIONS
CONNECTOR DIMENSIONS
FEMALE RIGHT ANGLE (90º) BOARD MOUNT CONNECTOR WITH A.C. PASS-THROUGH
CODE 4 WITH MOS*-246.4
CRIMP CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY
PART NUMBER FOR INVERTED TERMINATION
PCIH47RF400A1-246.4
FEMALE RIGHT ANGLE (90º) BOARD MOUNT CONNECTOR WITH A.C. PASS-THROUGH
CODE 4 WITH MOS*-246.4
CRIMP CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY
STANDARD PART NUMBER
PCIH47F400A1-246.4
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø1.14 [0.045] holes for size 22 contact holes.
Suggest Ø2.03 [0.080] holes for size 16 contact holes.
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
Note: See below for suggested printed board hole sizes.
RIGHT ANGLE (90º)
BOARD MOUNT CONNECTOR, FEMALE
Crimp contacts ordered
separately (see pages 102-103)
Crimp contacts
ordered separately
(see pages 102-103)
* For MOS descriptions,
see chart on pages 111-112.
* For MOS descriptions,
see chart on pages 111-112.
25 DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Compact
Power
Connectors
Positronic Industries
connectpositronic.com
PCIH SERIES
24X
ø0.71 [0.028]
49X
2.68 [0.106]
25X
ø1.60 [0.063]
7.96 [0.313]
12.21 [0.481]
37.70 [1.484]
32.65 [1.285]
27.60 [1.087]
9X 4.20 [0.165]
12.79 [0.504]
10.09 [0.397]
7.39 [0.291]
2X 42.50 [1.673]
7X 2.70 [0.106]
4.10 [0.161]
0.20
[0.008]
14.71±0.65
[0.579±0.026]
4X Size 16 Contacts
5mm Recessed Min.
FEMALE RIGHT ANGLE (90º) BOARD MOUNT CONNECTOR
CODE 4 WITH MOS*-379.0
STANDARD PART NUMBER
PCIH49W25F400A1-379.0
24X
ø0.71 [0.028]
49X
2.68 [0.106]
25X
ø1.60 [0.063]
14.71±0.65
[0.579±0.026]
4X Size 16 Contacts
5 mm Min. Recess
0.20
[0.008]
27.60 [1.087]
32.65 [1.285]
37.70 [1.484]
9X 4.20 [0.165]
4.10 [0.161]
7X
2.70 [0.106]
2X
42.50 [1.673]
12.79 [0.504]
10.09 [0.397]
7.38 [0.291]
12.21 [0.481]
7.96 [0.313]
FEMALE RIGHT ANGLE (90º) BOARD MOUNT CONNECTOR
CODE 4 WITH MOS*-379.0
PART NUMBER FOR INVERTED TERMINATION
PCIH49W25RF400A1-379.0
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø1.14 [0.045] holes for size 22 contact holes.
Suggest Ø2.03 [0.080] holes for size 16 contact holes.
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
CONNECTOR DIMENSIONS
CONTACT HOLE PATTERN
CONTACT HOLE PATTERN
CONNECTOR DIMENSIONS
Note: See below for suggested printed board hole sizes.
RIGHT ANGLE (90º)
BOARD MOUNT CONNECTOR, FEMALE
* For MOS descriptions,
see chart on pages 111-112.
* For MOS descriptions,
see chart on pages 111-112.
Compact
Power
Connectors Positronic Industries
connectpositronic.com
PCIH SERIES
26
DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
15X
ø0.71 [0.028]
23X
ø1.60 [0.063]
12.59 [0.496]
10.09 [0.397]
7.59 [0.299]
2X
42.50 [1.673]
8X 4.00 [0.157]
2.00 [0.079]
4.25 [0.167]
Second Mate First Mate
15X
ø0.71 [0.028]
23X
ø1.60 [0.063]
38X
2.68 [0.106]
Positions 22,25,28
Last to
Mate Signal
27.50 [1.083]
32.50 [1.280]
37.50 [1.476]
14.71±0.65
[0.579±0.026]
INVERTED PART NUMBER:
PCIH38M400A1
9X 4.25 [0.167]
1.00 [0.039]
12.21 [0.481]
7.96 [0.313]
37.50 [1.476]
27.50 [1.083]
1.00 [0.039]
2X
42.50 [1.673]
8X
4.00 [0.157]
2.00 [0.079]
4.25 [0.167]
9X 4.25 [0.167]
12.21 [0.481]
38X
2.68 [0.106]
Positions 22,25,28
Mate Signal
Last to
Second Mate
First Mate
7.96 [0.313]
14.71±0.65
[0.579±0.026]
12.59 [0.496]
10.09 [0.397]
7.59 [0.299]
32.50 [1.280]
MALE RIGHT ANGLE (90º) BOARD MOUNT CONNECTOR
CODE 4
STANDARD PART NUMBER
PCIH38M400A1
CONTACT HOLE PATTERN
CONNECTOR DIMENSIONS
CONTACT HOLE PATTERN
CONNECTOR DIMENSIONS
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø1.14 [0.045] holes for size 20 contact holes.
Suggest Ø2.03 [0.080] holes for size 16 contact holes.
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
Note: See below for suggested printed board hole sizes.
RIGHT ANGLE (90º)
BOARD MOUNT CONNECTOR, MALE
MALE RIGHT ANGLE (90º) BOARD MOUNT CONNECTOR
CODE 4
PART NUMBER FOR INVERTED TERMINATION
PCIH38RM400A1
27 DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Compact
Power
Connectors
Positronic Industries
connectpositronic.com
PCIH SERIES
47X
2.68 [0.106]
14.71±0.65
[0.579±0.026]
Second Mate
First Mate
24X
ø0.71 [0.028]
23X
ø1.60 [0.063]
Position 27
Mate Signal
Last to
9X 4.20 [0.165]
27.60 [1.087]
32.65 [1.285]
37.70 [1.484]
12.79 [0.504]
10.09 [0.397]
7.39 [0.291]
2X 42.50
[1.673]
7X 2.70
[0.106]
4.10 [0.161]
0.20
[0.008] 7.96 [0.313]
12.21 [0.481]
Position 27
Last to
Mate Signal
23X
ø1.60 [0.063]
47X
2.68 [0.106]
24X
ø0.71 [0.028]
Second Mate
First Mate
14.71±0.65
[0.579±0.026]
37.70 [1.484]
7.39 [0.291]
10.09 [0.397]
12.79 [0.504]
7X 2.70
[0.106]
4.10 [0.161]
2X 42.50
[1.673]
7.96 [0.313]
0.20
[0.008]
32.65 [1.285]
27.60 [1.087]
9X 4.20 [0.165]
12.21 [0.481]
MALE RIGHT ANGLE (90º) BOARD MOUNT CONNECTOR
CODE 4
STANDARD PART NUMBER
PCIH47M400A1
MALE RIGHT ANGLE (90º) BOARD MOUNT CONNECTOR
CODE 4
PART NUMBER FOR INVERTED TERMINATION
PCIH47RM400A1
CONNECTOR DIMENSIONS
CONTACT HOLE PATTERN
CONTACT HOLE PATTERN
CONNECTOR DIMENSIONS
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø1.14 [0.045] holes for size 22 contact holes.
Suggest Ø 2.03 [0.080] holes for size 16 contact holes.
Suggest Ø 3.56±0.08 [0.140±0.003] holes for connector mounting holes.
Note: See below for suggested printed board hole sizes.
RIGHT ANGLE (90º)
BOARD MOUNT CONNECTOR, MALE
Compact
Power
Connectors Positronic Industries
connectpositronic.com
PCIH SERIES
28
DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
25X
ø1.60 [0.063]
49X
2.68 [0.106]
24X
ø0.71 [0.028]
Position 27
Last to
Mate Signal
14.71±0.65
[0.579±0.026]
7.96 [0.313]
10.09 [0.397]
7.39 [0.291]
12.21 [0.481]
37.70 [1.484]
12.79 [0.504]
2X 42.50
[1.673]
4.10
[0.161]
7X 2.70
[0.106]
27.60 [1.087]
32.65 [1.285]
9X 4.20 [0.165] 0.20
[0.008]
Positions 46, 47, 48, 49
Second Mate
Position 45
First Mate
MALE RIGHT ANGLE (90º) BOARD MOUNT CONNECTOR
CODE 4 WITH MOS*-378.0
STANDARD PART NUMBER
PCIH49W25M400A1-378.0
CONNECTOR DIMENSIONS CONTACT HOLE PATTERN
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø1.14 [0.045] holes for size 20 contact holes.
Suggest Ø2.03 [0.080] holes for size 16 contact holes.
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
Note: See below for suggested printed board hole sizes.
RIGHT ANGLE (90º)
BOARD MOUNT CONNECTORS, MALE
* For MOS descriptions,
see chart on pages 111-112.
2X 3.56±0.08
[ø0.140±0.003]
82.34 [3.242]
2X
3.83
[0.151]
6.85
[0.270]
13.70 [0.539]
96.36 [3.794]
90.00 [3.543]
2X
ø2.54
[ø0.100]
12.54 [0.494]
6.02
[0.237]
12.00 [0.472]
2X Size 16 Contacts
5 mm Recess
12.69 [0.500]
20X 3.56 [0.140]
C'BORE
3X 4.19 [0.165]
C'BORE
2X 3.56±0.08
[ø0.140±0.003]
82.34 [3.242]
2X
3.83
[0.151]
6.85
[0.270]
13.70 [0.539]
6.02 [0.237]
12.00 [0.472]
90.00 [3.543]
96.36 [3.794]
12.54 [0.494]
2X
ø2.54 [ø0.100]
2X Size 16 Contacts
5mm Recess
12.69 [0.500]
20X 3.56 [0.140]
C'BORE
3X 4.19 [0.165]
C'BORE
FEMALE PANEL MOUNT CRIMP CONTACT CONNECTORS
CODE 8
CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY
STANDARD PART NUMBER
PCIH47F8000
PANEL CUT OUT
PANEL CUT OUT
CONNECTOR DIMENSIONS
CONNECTOR DIMENSIONS
29 DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Compact
Power
Connectors
Positronic Industries
connectpositronic.com
PCIH SERIES
FEMALE PANEL MOUNT CRIMP CONTACT CONNECTORS
CODE 8
CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY
STANDARD PART NUMBER
PCIH38F8000
PANEL MOUNT
CONNECTORS, FEMALE
For information regarding removable contacts, see Removable Contact section, pages 102-103.
20X Size 16 Bi-Spring Style
Press-Fit Contacts
15X Size 20 Omega Style
Press-Fit Contacts
35X "L"
(see below)
6.32 [0.249]
12.00 [0.472]
2X Size 16 Contacts
5 mm Recess
16.19 [0.637]
3X ø4.19 [0.165]
C'BORE
2X 6.85 [0.270]
2.83 [0.111] 1.00 [0.039]
9X
4.25 [0.167]
17.19 [0.677]
High Profile A.C.
Pass-Through,
Cutout
2.125 [0.0837]
4.25 [0.167]
8X 4.00 [0.157]
2.00 [0.079]
4.25 [0.167]
2X 2.50 [0.098]
2X
44.00 [1.732]
FEMALE COMPLIANT PRESS-FIT CONNECTOR WITH A.C. PASS-THROUGH
CODE 93 OR 94 WITH MOS*-245.0
CRIMP CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY
HIGH PROFILE PART NUMBER
PCIH38F9300A1-245.0
PCIH38F9400A1-245.0
CONNECTOR DIMENSIONS
CONTACT HOLE PATTERN
CONTACT TAIL LENGTH
Code “L” Length Board Thickness
93 5.72 [0.225] 2.29 to 4.45
[0.090 to 0.175]
94 7.04 [0.277] 4.45 min.
[0.175 min.]
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
NOTE: See page 110 for suggested printed board drill hole sizes, recommended
plating and finished hole sizes for compliant contact termination positions.
For press-fit connector installation tools, see pages 108-109.
For mounting screw options, see page 108.
Crimp contacts
ordered separately
(see pages 102-103)
Compact
Power
Connectors Positronic Industries
connectpositronic.com
PCIH SERIES
30
DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
15X Size 20 Contacts
27.50 [1.083]
32.50 [1.280]
37.50 [1.476]
38X "L"
(see below)
4.25 [0.167]
8X 4.00
[
0.157
]
2X 2.50 [0.098]
2X Size 16 Contacts
5 mm Min. Recess
2.125 [0.0837]
2.00 [0.079]
4.25 [0.167]
2X
44.00 [1.732]
9X 4.25 [0.167]
1.00 [0.039]
15X Size 20
Omega Style
Press-Fit Contacts 27.50 [1.083]
32.50 [1.280]
37.50 [1.476]
38X "L"
(see below)
4.25 [0.167]
8X 4.00 [0.157]
2X 2.50 [0.098]
2X Size 16 Contacts
5 mm Min. Recess
2.125 [0.0837]
2.00 [0.079]
4.25 [0.167]
2X
44.00 [1.732]
9X 4.25 [0.167]
1.00 [0.039]
23X Size 16 Bi-Spring Style
Press-Fit Contacts
CONNECTOR DIMENSIONS CONTACT HOLE PATTERN
FEMALE COMPLIANT PRESS-FIT CONNECTOR
CODE 93 OR 94
STANDARD PART NUMBER
PCIH38F9300A1
PCIH38F9400A1
CONTACT TAIL LENGTH
Code “L” Length Board Thickness
93 5.72 [0.225] 2.29 to 4.45
[0.090 to 0.175]
94 7.04 [0.277] 4.45 min.
[0.175 min.]
COMPLIANT PRESS-FIT
BOARD MOUNT CONNECTOR, FEMALE
Note: See below for suggested printed board hole sizes,
press-fit connector installation tools, and mounting
screw options.
* For MOS descriptions,
see chart on pages 111-112.
37.50 [1.476]
35X "L"
(see below) 32.50 [1.280]
27.50 [1.083]
8X 4.00 [0.157]
2.00 [0.079]
2X Size 16 Contacts
5 mm Recess 2X 2.50 [0.098]
4.25 [0.167]
2.125 [0.0837]
9X 4.25 [0.167]
1.00 [0.039]
2X
44.00 [1.732]
20X Size 16 Bi-Spring
Style Press-Fit Contacts
4.25 [0.167]
Minimum A.C.
Pass-Through Holes
3X
ø3.30 [0.130]
15X Size 20 Omega Style
Press-fit Contacts
31 DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Compact
Power
Connectors
Positronic Industries
connectpositronic.com
PCIH SERIES
FEMALE COMPLIANT PRESS-FIT CONNECTOR WITH A.C. PASS-THROUGH
CODE 93 OR 94 WITH MOS*-246.1
CRIMP CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY
LOW PROFILE PART NUMBER
PCIH38F9300A1-246.1
PCIH38F9400A1-246.1
CONNECTOR DIMENSIONS
CONTACT HOLE PATTERN
CONTACT TAIL LENGTH
Code “L” Length Board Thickness
93 5.72 [0.225] 2.29 to 4.45
[0.090 to 0.175]
94 7.04 [0.277] 4.45 min.
[0.175 min.]
COMPLIANT PRESS-FIT
BOARD MOUNT CONNECTOR, FEMALE
Crimp
contacts
ordered
separately
(see pages
102-103)
32.65 [1.285]
37.70 [1.484]
47X "L"
(see below)
4.25 [0.167]
7X
2.70 [0.106] 4.10 [0.161]
2.125 [0.0837]
2X 2.70 [0.106]
2X Size 16 Contacts
5 mm Min. Recess
9X
4.20 [0.165]
27.60 [1.087]
2X
44.00 [1.732]
0.20
[0.008]
23X Size 16 Bi-Spring Style
Press-Fit Contacts
24X Size 22
Omega Style
Press-Fit Contacts
CONNECTOR DIMENSIONS CONTACT HOLE PATTERN
FEMALE COMPLIANT PRESS-FIT CONNECTOR
CODE 93 OR 94
STANDARD PART NUMBER
PCIH47F9300A1
PCIH47F9400A1
CONTACT TAIL LENGTH
Code “L” Length Board Thickness
93 5.72 [0.225] 2.29 to 4.45
[0.090 to 0.175]
94 7.04 [0.277] 4.45 min.
[0.175 min.]
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
NOTE: See page 110 for suggested printed board drill hole sizes, recommended
plating and finished hole sizes for compliant contact termination positions.
For press-fit connector installation tools, see pages 108-109.
For mounting screw options, see page 108.
Note: See below for suggested printed board hole sizes,
press-fit connector installation tools, and mounting
screw options.
* For MOS descriptions,
see chart on pages 111-112.
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
NOTE: See page 110 for suggested printed board drill hole sizes, recommended plating and
finished hole sizes for compliant contact termination positions.
For press-fit connector installation tools, see pages 108-109.
For mounting screw options, see page 108.
Note: See below for suggested printed board hole sizes,
press-fit connector installation tools, and mounting
screw options.
Compact
Power
Connectors Positronic Industries
connectpositronic.com
PCIH SERIES
32
DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
37.70 [1.484]
32.65 [1.285]
27.60 [1.087]
7X
2.70 [0.106]
0.20
[0.008]
5X ø3.30 [0.130] Minimum
A.C. Pass-Through Holes
2X 2.70 [0.106]
24X Size 22 Omega
Style Press-Fit Contacts 44X "L"
(see below)
9X 4.20 [0.165]
4.25 [0.167]
2.125 [0.0837]
4.10 [0.161]
2X
44.00 [1.732]
4X Size 16 Contacts
5 mm Recess
20X Size 16 Bi-Spring
Style Press-Fit Contacts
FEMALE COMPLIANT PRESS-FIT CONNECTOR WITH A.C. PASS-THROUGH
CODE 93 OR 94 WITH MOS*-246.3
CRIMP CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY
LOW PROFILE PART NUMBER
PCIH49W25F9300A1-246.3
PCIH49W25F9400A1-246.3
CONNECTOR DIMENSIONS
CONTACT TAIL LENGTH
Code “L” Length Board Thickness
93 5.72 [0.225] 2.29 to 4.45
[0.090 to 0.175]
94 7.04 [0.277] 4.45 min.
[0.175 min.]
44X "L"
(see below) 32.65 [1.285]
27.60 [1.087]
7X
2.70 [0.106]
37.70 [1.484]
Minimum A.C.
Pass-Through Holes
2X Size 16 Contacts
5 mm Recess 2X 2.70 [0.106]
4.10 [0.161]
2X
44.00 [1.732]
2.125 [0.0837]
4.25 [0.167]
9X 4.20 [0.165]
3X
ø3.30 [0.130]
0.20
[0.008]
20X Size 16 Bi-Spring
Style Press-Fit Contacts
24X Size 22 Omega Style
Press-fit Contacts
FEMALE COMPLIANT PRESS-FIT CONNECTOR WITH A.C. PASS-THROUGH
CODE 93 OR 94 WITH MOS*-246.0
CRIMP CONTACTS ARE NOT SUPPLIED WITH CONNECTOR AND MUST BE ORDERED SEPARATELY
LOW PROFILE PART NUMBER
PCIH47F9300A1-246.0
PCIH47F9400A1-246.0
CONNECTOR DIMENSIONS CONTACT HOLE PATTERN
CONTACT TAIL LENGTH
Code “L” Length Board Thickness
93 5.72 [0.225] 2.29 to 4.45
[0.090 to 0.175]
94 7.04 [0.277] 4.45 min.
[0.175 min.]
COMPLIANT PRESS-FIT
BOARD MOUNT CONNECTOR, FEMALE
Crimp
contacts
ordered
separately
(see pages
102-103)
Crimp
contacts
ordered
separately
(see pages
102-103)
CONTACT HOLE PATTERN
* For MOS descriptions,
see chart on pages 111-112.
* For MOS descriptions,
see chart on pages 111-112.
33 DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Compact
Power
Connectors
Positronic Industries
connectpositronic.com
PCIH SERIES
2X
44.00 [1.732]
2X 2.70 [0.106]
2.125 [0.0837]
4.10 [0.161]
7X
2.70 [0.106]
4.25 [0.167]
37.70 [1.484]
49X "L"
(see below)
32.65 [1.285]
27.60 [1.087]
0.20
[0.008] 9X
4.20 [0.165]
4X Size 16 Contacts
5 mm Recess
24X Size 22 Omega
Style Press-Fit Contacts
25X Size 16 Bi-Spring
Style Press-Fit Contacts
FEMALE COMPLIANT PRESS-FIT CONNECTOR
CODE 93 OR 94 WITH MOS*-379.0
STANDARD PART NUMBER
PCIH49W25F9300A1-379.0
PCIH49W25F9400A1-379.0
CONTACT HOLE PATTERN
CONNECTOR DIMENSIONS
COMPLIANT PRESS-FIT
BOARD MOUNT CONNECTOR, FEMALE
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
NOTE: See page 110 for suggested printed board drill hole sizes, recommended plating and
finished hole sizes for compliant contact termination positions.
For press-fit connector installation tools, see pages 108-109.
For mounting screw options, see page 108.
CONTACT TAIL LENGTH
Code “L” Length Board Thickness
93 5.72 [0.225] 2.29 to 4.45
[0.090 to 0.175]
94 7.04 [0.277] 4.45 min.
[0.175 min.]
* For MOS descriptions,
see chart on pages 111-112.
Compact
Power
Connectors Positronic Industries
connectpositronic.com
PCIH SERIES
34
DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
47X "L"
(see below)
37.70 [1.484]
0.20
[0.008]
4.10 [0.161]
7X 2.70 [0.106]
27.60 [1.087]
32.65 [1.285]
2X
44.00 [1.732]
2.125 [0.0837]
Position 27
Last to Mate Signal
First Mate
9X 4.20 [0.165]
Second Mate 4.25 [0.167] 2X 2.70 [0.106]
4.25 [0.167]
2.00 [0.079]
8X 4.00 [0.157]
1.00 [0.039]
27.50 [1.083]
32.50 [1.280]
37.50 [1.476]
38X "L"
(see below)
2.125 [0.0837]
Position 22,25,28
Last to Mate Signal
23X Size 16
Bi-Spring Style
Press-Fit Contacts 24X Size 22 Omega Style
Press-Fit Contacts
First Mate
4.25 [0.167]
9X 4.25 [0.167]
2X
44.00 [1.732]
23X Size 16
Bi-Spring Style
Press-Fit Contacts
15X Size 20 Omega Style
Press-Fit Contacts
2X 2.50 [0.098]
Second Mate
CONNECTOR DIMENSIONS CONTACT HOLE PATTERN
MALE COMPLIANT PRESS-FIT CONNECTOR
CODE 93 OR 94
STANDARD PART NUMBER
PCIH38M9300A1
PCIH38M9400A1
CONNECTOR DIMENSIONS CONTACT HOLE PATTERN
MALE COMPLIANT PRESS-FIT CONNECTOR
CODE 93 OR 94
STANDARD PART NUMBER
PCIH47M9300A1
PCIH47M9400A1
COMPLIANT PRESS-FIT
BOARD MOUNT CONNECTOR, MALE
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
NOTE: See page 110 for suggested printed board drill hole sizes, recommended plating and
finished hole sizes for compliant contact termination positions.
For press-fit connector installation tools, see pages 108-109.
For mounting screw options, see page 108.
Note: See below for suggested printed board hole sizes,
press-fit connector installation tools, and mounting
screw options.
CONTACT TAIL LENGTH
Code “L” Length Board Thickness
93 5.72 [0.225] 2.29 to 4.45
[0.090 to 0.175]
94 7.04 [0.277] 4.45 min.
[0.175 min.]
CONTACT TAIL LENGTH
Code “L” Length Board Thickness
93 5.72 [0.225] 2.29 to 4.45
[0.090 to 0.175]
94 7.04 [0.277] 4.45 min.
[0.175 min.]
35 DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Compact
Power
Connectors
Positronic Industries
connectpositronic.com
PCIH SERIES
49X "L"
(see below) 37.70 [1.484]
0.20
[0.008]
4.10 [0.161]
7X 2.70 [0.106]
27.60 [1.087]
32.65 [1.285]
2X
44.00 [1.732]
2.125 [0.0837]
Position 27
Last to
Mate Signal
9X 4.20 [0.165]
4.25 [0.167] 2X 2.70 [0.106]
Positions 46, 47, 48, 49
Second Mate
Position 45
First Mate
24X Size 22 Omega
Style Press-Fit Contacts
25X Size 16 Bi-Spring
Style Press-Fit Contacts
MALE COMPLIANT PRESS-FIT CONNECTOR
CODE 93 OR 94 WITH MOS*-378.0
STANDARD PART NUMBER
PCIH49W25M9300A1-378.0
PCIH49W25M9400A1-378.0
CONTACT HOLE PATTERN
CONNECTOR DIMENSIONS
ENLARGED DETAIL OF COMPLIANT
CONTACT TERMINATIONS
COMPLIANT PRESS-FIT
BOARD MOUNT CONNECTOR, MALE
SUGGESTED PRINTED BOARD HOLE SIZES:
Suggest Ø3.56±0.08 [0.140±0.003] holes for connector mounting holes.
NOTE: See page 110 for suggested printed board drill hole sizes, recommended plating and
finished hole sizes for compliant contact termination positions.
For press-fit connector installation tools, see pages 108-109.
For mounting screw options, see page 108.
CONTACT TAIL LENGTH
Code “L” Length Board Thickness
93 5.72 [0.225] 2.29 to 4.45
[0.090 to 0.175]
94 7.04 [0.277] 4.45 min.
[0.175 min.]
* For MOS descriptions,
see chart on pages 111-112.
Compact
Power
Connectors Positronic Industries
connectpositronic.com
PCIH SERIES
36
DIMENSIONS ARE IN MILLIMETERS [INCHES].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
STEP 1 - BASIC SERIES
PCIH - PCIH Series
STEP 3 - CONNECTOR GENDER
F - Female
M - Male
12345678
PCIH 47 F93 0 0 A1 /AA
9
ORDERING INFORMATION - CODE NUMBERING SYSTEM
Specify Complete Connector By Selecting An Option From Step 1 Through 7
STEP 6 - HOODS
0 - Not applicable
STEP 5 - MOUNTING STYLE
0 - Not Applicable
See page 108 for mounting screw options.
STEP 4 - CONTACT TERMINATION TYPE
3 - Solder, Straight Printed Board Mount with 4.50 [0.177]
tail extension for connection systems 1 and 2.
4 - Solder, Right Angle (90º) Printed Board Mount with
2.68 [0.106] tail extension for connection systems 1, 2,
3 and 4.
** 8 - Contacts must be ordered separately for Panel Mount
Cable Connectors, connection system 3, see pages
102-103. Female connector only.
93 - Press-Fit, Compliant Termination size 16 and size 20 or
size 22 Straight Printed Board Mount for use with board
thicknesses of 2.29 to 4.45 [0.090 to 0.175].
Connection systems 1 and 2.
94 - Press-Fit, Compliant Termination size 16 and size 20 or
size 22 Straight Printed Board Mount for use with board
thickness of 4.45 minimum [0.175 minimum].
Connection systems 1 and 2.
STEP 2 - CONNECTOR VARIANTS
38 - 23 size 16 contacts and 15 size
20 contacts
38R - 23 size 16 contacts and 15 size
20 contacts inverted termination
style, use with contact type “4”
47 - 23 size 16 contacts and 24 size
22 contacts
47R - 23 size 16 contacts and 24 size
22 contacts inverted termination
style, use with contact type “4”
49W25 - 25 size 16 contacts and 24 size
22 contacts
*49W25R - 25 size 16 contacts and 24 size
22 contacts inverted termination
style, use with contact type “4”
STEP
STEP 8 - ENVIRONMENTAL
COMPLIANCE OPTIONS
/AA - Compliant per EU Directive
2002/95/EC (RoHS)
STEP 7 - CONTACT PLATING FOR PRINTED BOARD
TYPE CONNECTORS
0 - Crimp contacts ordered separately
A1 - Gold flash over nickel on mating end and termination end.
A2 - Gold flash over nickel on mating end and 5.00 microns
[0.00020 inch] tin-lead solder coat on termination end.
Not available with code 93 or code 94 in step 4.
C1 - 0.76 microns [0.000030 inch] gold over nickel on mating
end and termination end.
C2 - 0.76 microns [0.000030 inch] gold over nickel on mating
end and 5.00 microns [0.00020 inch] tin-lead solder coat
on termination end. Not available with code 93 or code
94 in step 4.
D1 - 1.27 microns [0.000050 inch] gold over nickel on mating
end and termination end.
D2 - 1.27 microns [0.000050 inch] gold over nickel on mating
end and 5.00 microns [0.00020 inch] tin-lead solder coat
on termination end. Not available with code 93 or code
94 in step 4.
* Female contact variants are readily available. Contact Technical Sales for
availability of male contact variants.
** Available for 38 and 47 variants. Contact Technical Sales for availability of
49W25 variant.
EXAMPLE
NOTE: If compliance to environmental
legislation is not required, this step will not be
used. Example: PCIH47F9300A1
STEP 9 - SPECIAL OPTIONS
FOR LISTING OF SPECIAL OPTIONS,
SEE SPECIAL OPTIONS APPENDIX
ON PAGES 111 AND 112.
P
O
S
I
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
•
p
e
r
E
U
D
i
r
e
c
t
i
v
e
2
0
0
2
/
9
5
/
E
C
•
RoHS
RoHS
Compliant
NOTE: Once you have made a connector selection,
contact Technical Sales if you would like to receive a
drawing in DXF, PDF format or a 3-dimensional IGES file.
SK Drawing 3-dimensional model
PCIH
ORDERING INFORMATION
