TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 D D D D D D D D OFFSET N1 IN - IN + GND 1 8 2 7 3 6 4 5 BIAS SELECT VDD OUT OFFSET N2 FK PACKAGE (TOP VIEW) NC OFFSET N1 NC BIAS SELECT NC D D, JG, OR P PACKAGE (TOP VIEW) Input Offset Voltage Drift . . . Typically 0.1 V/Month, Including the First 30 Days Wide Range of Supply Voltages Over Specified Temperature Range: 0C to 70C . . . 3 V to 16 V - 40C to 85C . . . 4 V to 16 V - 55C to 125C . . . 5 V to 16 V Single-Supply Operation Common-Mode Input Voltage Range Extends Below the Negative Rail (C-Suffix and I-Suffix Types) Low Noise . . . 25 nV/Hz Typically at f = 1 kHz (High-Bias Mode) Output Voltage Range Includes Negative Rail High Input Impedance . . . 1012 Typ ESD-Protection Circuitry Small-Outline Package Option Also Available in Tape and Reel Designed-In Latch-Up Immunity NC IN - NC IN + NC 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 NC VDD NC OUT NC NC GND NC OFFSET N2 NC D description The TLC271 operational amplifier combines a wide range of input offset voltage grades with low NC - No internal connection offset voltage drift and high input impedance. In addition, the TLC271 offers a bias-select mode that allows the user to select the best combination of power dissipation and ac performance for a particular application. These devices use Texas Instruments silicon-gate LinCMOS technology, which provides offset voltage stability far exceeding the stability available with conventional metal-gate processes. AVAILABLE OPTIONS TA VIOmax AT 25C 0C to 70C 2 mV 5 mV 10 mV - 40C to 85C - 55C to 125C PACKAGE SMALL OUTLINE (D) CHIP CARRIER (FK) CERAMIC DIP (JG) PLASTIC DIP (P) TLC271BCD TLC271ACD TLC271CD -- -- TLC271BCP TLC271ACP TLC271CP 2 mV 5 mV 10 mV TLC271BID TLC271AID TLC271ID -- -- TLC271BIP TLC271AIP TLC271IP 10 mV TLC271MD TLC271MFK TLC271MJG TLC271MP The D package is available taped and reeled. Add R suffix to the device type (e.g., TLC271BCDR). Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. LinCMOS is a trademark of Texas Instruments. Copyright 2001, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 DEVICE FEATURES BIAS-SELECT MODE PARAMETER MEDIUM PD SR 3375 525 50 3.6 0.4 0.03 Vn B1 25 32 68 0.5 0.09 MHz 170 480 V/mV 1.7 AVD 23 Typical at VDD = 5 V, TA = 25C LOW UNIT HIGH W V/s nV/Hz description (continued) Using the bias-select option, these cost-effective devices can be programmed to span a wide range of applications that previously required BiFET, NFET, or bipolar technology. Three offset voltage grades are available (C-suffix and I-suffix types), ranging from the low-cost TLC271 (10 mV) to the TLC271B (2 mV) low-offset version. The extremely high input impedance and low bias currents, in conjunction with good common-mode rejection and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as well as for upgrading existing designs. In general, many features associated with bipolar technology are available in LinCMOS operational amplifiers, without the power penalties of bipolar technology. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are all easily designed with the TLC271. The devices also exhibit low-voltage single-supply operation, making them ideally suited for remote and inaccessible battery-powered applications. The common-mode input voltage range includes the negative rail. A wide range of packaging options is available, including small-outline and chip-carrier versions for high-density system applications. The device inputs and output are designed to withstand - 100-mA surge currents without sustaining latch-up. The TLC271 incorporates internal ESD-protection circuits that prevent functional failures at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015.2; however, care should be exercised in handling these devices as exposure to ESD may result in the degradation of the device parametric performance. The C-suffix devices are characterized for operation from 0C to 70C. The I-suffix devices are characterized for operation from - 40C to 85C. The M-suffix devices are characterized for operation over the full military temperature range of - 55C to 125C. bias-select feature The TLC271 offers a bias-select feature that allows the user to select any one of three bias levels depending on the level of performance desired. The tradeoffs between bias levels involve ac performance and power dissipation (see Table 1). Table 1. Effect of Bias Selection on Performance TYPICAL PARAMETER VALUES C, VDD = 5 V TA = 25 25C, MODE HIGH BIAS RL = 10 k MEDIUM BIAS RL = 100 k LOW BIAS RL = 1 M UNIT PD SR Power dissipation 3.4 0.5 0.05 mW Slew rate 3.6 0.4 0.03 V/s Vn B1 Equivalent input noise voltage at f = 1 kHz 25 32 68 Unity-gain bandwidth 1.7 0.5 0.09 m AVD Phase margin 46 40 34 23 170 480 2 Large-signal differential voltage amplification POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 nV/Hz MHz V/mV TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 bias selection Bias selection is achieved by connecting the bias select pin to one of three voltage levels (see Figure 1). For medium-bias applications, it is recommended that the bias select pin be connected to the midpoint between the supply rails. This procedure is simple in split-supply applications, since this point is ground. In single-supply applications, the medium-bias mode necessitates using a voltage divider as indicated in Figure 1. The use of large-value resistors in the voltage divider reduces the current drain of the divider from the supply line. However, large-value resistors used in conjunction with a large-value capacitor require significant time to charge up to the supply midpoint after the supply is switched on. A voltage other than the midpoint can be used if it is within the voltages specified in Figure 1. VDD Low To the Bias Select Pin 1 M BIAS MODE Medium Medium VDD 1 V to VDD - 1 V High GND Low High 1 M BIAS-SELECT VOLTAGE (single supply) 0.01 F Figure 1. Bias Selection for Single-Supply Applications high-bias mode In the high-bias mode, the TLC271 series features low offset voltage drift, high input impedance, and low noise. Speed in this mode approaches that of BiFET devices but at only a fraction of the power dissipation. Unity-gain bandwidth is typically greater than 1 MHz. medium-bias mode The TLC271 in the medium-bias mode features low offset voltage drift, high input impedance, and low noise. Speed in this mode is similar to general-purpose bipolar devices but power dissipation is only a fraction of that consumed by bipolar devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 low-bias mode In the low-bias mode, the TLC271 features low offset voltage drift, high input impedance, extremely low power consumption, and high differential voltage gain. ORDER OF CONTENTS TOPIC BIAS MODE schematic all absolute maximum ratings all recommended operating conditions all electrical characteristics operating characteristics typical characteristics high (Figures 2 - 33) electrical characteristics operating characteristics typical characteristics medium (Figures 34 - 65) electrical characteristics operating characteristics typical characteristics low (Figures 66 - 97) parameter measurement information all application information all equivalent schematic VDD P3 P12 P9A R6 P4 P2 P1 P5 P9B P11 R2 IN - R1 P10 N5 IN + N11 P6A C1 R5 P6B P7B P7A P8 N12 N3 N9 N6 N7 N1 N2 N4 R3 D1 D2 N13 R7 R4 OFFSET OFFSET N1 N2 4 N10 OUT POST OFFICE BOX 655303 GND * DALLAS, TEXAS 75265 BIAS SELECT TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 absolute maximum ratings over operating free-air temperature (unless otherwise noted) Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDD Input voltage range, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 0.3 V to VDD Input current, II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 mA Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA Duration of short-circuit current at (or below) 25C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 40C to 85C M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 55C to 125C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or P package . . . . . . . . . . . . . . . . . 260C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package . . . . . . . . . . . . . . . . . . . . 300C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to network ground. 2. Differential voltages are at IN+ with respect to IN -. 3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded (see application section). DISSIPATION RATING TABLE PACKAGE TA 25C POWER RATING DERATING FACTOR ABOVE TA = 25C TA = 70C POWER RATING TA = 85C POWER RATING TA = 125C POWER RATING D 725 mW 5.8 mW/C 464 mW 377 mW 145 mW FK 1375 mW 11.0 mW/C 880 mW 715 mW 275 mW JG 1050 mW 8.4 mW/C 672 mW 546 mW 210 mW P 1000 mW 8.0 mW/C 640 mW 520 mW 200 mW recommended operating conditions Supply voltage, VDD Common mode input voltage, Common-mode voltage VIC VDD = 5 V VDD = 10 V Operating free-air temperature, TA POST OFFICE BOX 655303 C SUFFIX I SUFFIX M SUFFIX MIN MIN MAX MIN MAX MAX 3 16 4 16 5 16 - 0.2 3.5 - 0.2 3.5 0 3.5 - 0.2 8.5 - 0.2 8.5 0 8.5 0 70 - 40 85 - 55 125 * DALLAS, TEXAS 75265 UNIT V V C 5 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 HIGH-BIAS MODE electrical characteristics at specified free-air temperature (unless otherwise noted) TLC271C, TLC271AC, TLC271BC TEST CONDITIONS PARAMETER TLC271C VIO Input offset voltage TLC271AC VO = 1 1.4 4V V, VIC = 0 V,, RS = 50 , RL = 10 k TLC271BC TA VDD = 5 V MIN TYP MAX VDD = 10 V MIN TYP MAX 25C 1.1 1.1 Full range 10 12 25C 0.9 Full range 0.34 Full range 5 0.9 2 0.39 3 VIO IIO Input offset current (see Note 4) VO = VDD /2,, VIC = VDD /2 25C 0.1 60 0.1 60 70C 7 300 7 300 IIB Input bias current (see Note 4) VO = VDD /2,, VIC = VDD /2 25C 0.6 60 0.7 60 70C 40 600 50 600 VOH VOL AVD CMRR kSVR II(SEL) IDD Common mode input voltage Common-mode range (see Note 5) High-level output voltage Low-level output voltage L i l diff ti l Large-signal differential voltage am lification amplification Common-mode rejection ratio 25C - 0.2 to 4 Full range - 0.2 to 3.5 VID = 100 mV, V RL = 10 k VID = -100 100 mV, V IOL = 0 k RL = 10 k, See Note 6 VIC = VICRmin - 0.2 to 9 - 0.3 to 9.2 25C 3.2 3.8 8 8.5 0C 3 3.8 7.8 8.5 70C 3 3.8 7.8 8.4 V 25C 0 50 0 50 0C 0 50 0 50 70C 0 50 0 50 25C 5 23 10 36 0C 4 27 7.5 42 70C 4 20 7.5 32 25C 65 80 65 85 0C 60 84 60 88 70C 60 85 60 88 25C 65 95 65 95 0C 60 94 60 94 70C 60 96 60 96 dB Input current (BIAS SELECT) VI(SEL) = 0 25C - 1.4 VO = VDD /2, VIC = VDD /2, N lload No d 25C 675 1600 950 2000 0C 775 1800 1125 2200 70C 575 1300 750 1700 * DALLAS, TEXAS 75265 mV V/mV VDD = 5 V to t 10 V VO = 1 1.4 4V POST OFFICE BOX 655303 pA V Supply-voltage S l lt rejection j ti ratio ti (VDD /VIO) Supply current pA V - 0.2 to 8.5 dB A - 1.9 Full range is 0C to 70C. NOTES: 4. The typical values of input bias current and input offset current below 5 pA were determined mathematically. 5. This range also applies to each input individually. 6. At VDD = 5 V, VO = 0.25 V to 2 V; at VDD = 10 V, VO = 1 V to 6 V. 6 V/C 2 - 0.3 to 4.2 mV 2 Average temperature coefficient of input offset voltage VICR 1.8 5 6.5 3 25C to 70C 10 12 6.5 25C UNIT A TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 HIGH-BIAS MODE electrical characteristics at specified free-air temperature (unless otherwise noted) TLC271I, TLC271AI, TLC271BI TEST CONDITIONS PARAMETER TLC271I VIO Input offset voltage TLC271AI VO = 1 1.4 4V V, VIC = 0 V,, RS = 50 , RL = 10 k TLC271BI TA VDD = 5 V MIN TYP MAX VDD = 10 V MIN TYP MAX 25C 1.1 1.1 Full range 10 13 25C 0.9 Full range 0.34 Full range 5 0.9 2 0.39 3.5 VIO IIO Input offset current (see Note 4) VO = VDD /2,, VIC = VDD /2 25C 0.1 60 0.1 60 85C 24 1000 26 1000 IIB Input bias current (see Note 4) VO = VDD /2,, VIC = VDD /2 25C 0.6 60 0.7 60 85C 200 2000 220 2000 VOH VOL AVD CMRR kSVR II(SEL) IDD 25C - 0.2 to 4 Full range - 0.2 to 3.5 Common-mode input voltage range (see Note 5) High-level output voltage Low-level output voltage L i l diff ti l Large-signal differential voltage am lification amplification Common-mode rejection ratio VID = 100 mV, V RL = 10 k VID = -100 100 mV, V IOL = 0 k RL = 10 k, See Note 6 VIC = VICRmin V/C 2 - 0.3 to 4.2 - 0.2 to 9 - 0.3 to 9.2 pA pA V - 0.2 to 8.5 V 25C 3.2 3.8 8 8.5 - 40C 3 3.8 7.8 8.5 85C 3 3.8 7.8 8.5 V 25C 0 50 0 50 - 40C 0 50 0 50 85C 0 50 0 50 25C 5 23 10 36 - 40C 3.5 32 7 46 85C 3.5 19 7 31 25C 65 80 65 85 - 40C 60 81 60 87 85C 60 86 60 88 25C 65 95 65 95 - 40C 60 92 60 92 85C 60 96 60 96 mV V/mV dB Supply-voltage S l lt rejection j ti ratio ti (VDD /VIO) VDD = 5 V to t 10 V VO = 1 1.4 4V Input current (BIAS SELECT) VI(SEL) = 0 25C - 1.4 VO = VDD /2, VIC = VDD /2, N lload No d 25C 675 1600 950 2000 - 40C 950 2200 1375 2500 85C 525 1200 725 1600 Supply current mV 2 Average temperature coefficient of input offset voltage VICR 1.8 5 7 3.5 25C to 85C 10 13 7 25C UNIT dB A - 1.9 A Full range is - 40C to 85C. NOTES: 4. The typical values of input bias current and input offset current below 5 pA were determined mathematically. 5. This range also applies to each input individually. 6. At VDD = 5 V, VO = 0.25 V to 2 V; at VDD = 10 V, VO = 1 V to 6 V. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 HIGH-BIAS MODE electrical characteristics at specified free-air temperature (unless otherwise noted) TLC271M PARAMETER VIO Input offset voltage VIO Average temperature coefficient of input offset voltage IIO Input offset current (see Note 4) IIB VICR VOH VOL AVD CMRR Input bias current (see Note 4) TEST CONDITIONS VO = 1.4 V, VIC = 0 V,, RS = 50 , RL = 10 k TA VDD = 5 V MIN TYP MAX VDD = 10 V MIN TYP MAX 25C 11 1.1 11 1.1 Low-level output voltage L i l diff ti l Large-signal differential voltage am lification amplification Common-mode rejection ratio 10 mV Full range VO = VDD /2,, VIC = VDD /2 VO = VDD /2,, VIC = VDD /2 12 12 25C to 125C 2.1 25C 0.1 60 0.1 60 pA 125C 1.4 15 1.8 15 nA 25C 0.6 60 0.7 60 pA 9 35 10 35 nA 125C 25C 0 to 4 Full range 0 to 3.5 Common-mode input voltage g range (see Note 5) High-level output voltage 10 V/C 2.2 - 0.3 to 4.2 0 to 9 - 0.3 to 9.2 V 0 to 8.5 V 25C 3.2 3.8 8 8.5 VID = 100 mV, V RL = 10 k - 55C 3 3.8 7.8 8.5 125C 3 3.8 7.8 8.4 25C 0 50 0 50 VID = -100 100 mV, V IOL = 0 - 55C 0 50 0 50 125C 0 50 0 50 25C 5 23 10 36 k RL = 10 k, See Note 6 - 55C 3.5 35 7 50 125C 3.5 16 7 27 25C 65 80 65 85 - 55C 60 81 60 87 125C 60 84 60 86 25C 65 95 65 95 - 55C 60 90 60 90 125C 60 97 60 VIC = VICRmin kSVR Supply-voltage S l lt rejection j ti ratio ti (VDD /VIO) VDD = 5 V to t 10 V VO = 1 1.4 4V II(SEL) Input current (BIAS SELECT) VI(SEL) = 0 IDD Supply current VO = VDD /2, VIC = VDD /2, N lload No d 25C - 1.4 V dB dB 97 A - 1.9 25C 675 1600 950 2000 1000 2500 1475 3000 125C 475 1100 625 Full range is - 55C to 125C. NOTES: 4. The typical values of input bias current and input offset current below 5 pA were determined mathematically. 5. This range also applies to each input individually. 6. At VDD = 5 V, VO = 0.25 V to 2 V; at VDD = 10 V, VO = 1 V to 6 V. 1400 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 mV V/mV - 55C 8 UNIT A TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 HIGH-BIAS MODE operating characteristics at specified free-air temperature, VDD = 5 V PARAMETER TEST CONDITIONS TA TLC271C, TLC271AC, TLC271BC MIN VI(PP) ( )=1V SR Slew rate at unity gain RL = 10 k, CL = 20 pF pF, See Figure 98 VI(PP) ( ) = 2.5 V Vn Equivalent input noise voltage f = 1 kHz,, See Figure 99 RS = 20 ,, BOM Maximum output-swing bandwidth VO = VOH , RL = 10 k, k CL = 20 pF, F See Figure 98 VI = 10 mV, V See Figure 100 CL = 20 pF, F B1 m Unity-gain bandwidth Phase margin VI = 10 mV, mV CL = 20 pF, F, f = B1, See Figure 100 TYP 25C 3.6 0C 4 70C 3 25C 2.9 0C 3.1 70C 2.5 25C 25 25C 320 0C 340 70C 260 25C 1.7 0C 2 70C 1.3 25C 46 0C 47 70C 44 UNIT MAX V/s nV/Hz kHz MHz operating characteristics at specified free-air temperature, VDD = 10 V PARAMETER TEST CONDITIONS TA TLC271C, TLC271AC, TLC271BC MIN VI(PP) ( )=1V SR Slew rate at unity gain RL = 10 k, CL = 20 pF pF, See Figure 98 VI(PP) ( ) = 5.5 V Vn Equivalent input noise voltage f = 1 kHz,, See Figure 99 RS = 20 ,, BOM Maximum output-swing bandwidth VO = VOH, RL = 10 k, k CL = 20 pF, F See Figure 98 VI = 10 mV, V See Figure 100 CL = 20 pF, F B1 m Unity-gain bandwidth Phase margin f = B1, CL = 20 pF, F, POST OFFICE BOX 655303 VI = 10 mV, mV See Figure 100 * DALLAS, TEXAS 75265 TYP 25C 5.3 0C 5.9 70C 4.3 25C 4.6 0C 5.1 70C 3.8 25C 25 25C 200 0C 220 70C 140 25C 2.2 0C 2.5 70C 1.8 25C 49 0C 50 70C 46 UNIT MAX V/s nV/Hz kHz MHz 9 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 HIGH-BIAS MODE operating characteristics at specified free-air temperature, VDD = 5 V PARAMETER TEST CONDITIONS TA TLC271I, TLC271AI, TLC271BI MIN VI(PP) ( )=1V SR Slew rate at unity gain RL = 10 k, CL = 20 pF, pF See Figure 98 VI(PP) ( ) = 2.5 V Vn Equivalent input noise voltage f = 1 kHz,, See Figure 99 RS = 20 ,, BOM Maximum output-swing bandwidth VO = VOH, RL = 10 k, k CL = 20 pF, F See Figure 98 VI = 10 mV, V See Figure 100 CL = 20 pF, F B1 m Unity-gain bandwidth Phase margin VI = 10 mV, mV CL = 20 pF F, f = B1, See Figure 100 TYP 25C 3.6 - 40C 4.5 85C 2.8 25C 2.9 - 40C 3.5 85C 2.3 25C 25 25C 320 - 40C 380 85C 250 25C 1.7 - 40C 2.6 85C 1.2 25C 46 - 40C 49 85C 43 UNIT MAX V/s nV/H nV/Hz kHz MHz operating characteristics at specified free-air temperature, VDD = 10 V PARAMETER TEST CONDITIONS TA TLC271I, TLC271AI, TLC271BI MIN VI(PP) ( )=1V SR Slew rate at unity gain RL = 10 k, CL = 20 pF, pF See Figure 98 VI(PP) ( ) = 5.5 V Vn Equivalent input noise voltage f = 1 kHz,, See Figure 99 RS = 20 ,, BOM Maximum output-swing bandwidth VO = VOH, RL = 10 k, k CL = 20 pF, F See Figure 98 B1 m 10 Unity-gain bandwidth Phase margin VI = 10 mV, V See Figure 100 VI = 10 mV, mV CL = 20 pF F, POST OFFICE BOX 655303 CL = 20 pF, F ff= B1, See Figure 100 * DALLAS, TEXAS 75265 TYP 25C 5.3 - 40C 6.8 85C 4 25C 4.6 - 40C 5.8 85C 3.5 25C 25 25C 200 - 40C 260 85C 130 25C 2.2 - 40C 3.1 85C 1.7 25C 49 - 40C 52 85C 46 UNIT MAX V/s nV/Hz kHz MHz TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 HIGH-BIAS MODE operating characteristics at specified free-air temperature, VDD = 5 V PARAMETER TEST CONDITIONS VI(PP) ( )=1V SR Slew rate at unity gain RL = 10 k, CL = 20 pF pF, See Figure 98 VI(PP) ( ) = 2.5 V Vn Equivalent input noise voltage f = 1 kHz,, See Figure 99 RS = 20 ,, BOM Maximum output-swing bandwidth VO = VOH, RL = 10 k, k CL = 20 pF, F See Figure 98 B1 m Unity-gain bandwidth Phase margin VI = 10 mV, V See Figure 100 mV VI = 10 mV, CL = 20 pF, F, CL = 20 pF, F f = B1, See Figure 100 TA TLC271M MIN TYP 25C 3.6 - 55C 4.7 125C 2.3 25C 2.9 - 55C 3.7 125C 2 25C 25 25C 320 - 55C 400 125C 230 25C 1.7 - 55C 2.9 125C 1.1 25C 46 - 55C 49 125C 41 MAX UNIT V/s nV/H nV/Hz kHz MHz operating characteristics at specified free-air temperature, VDD = 10 V PARAMETER TEST CONDITIONS VI(PP) ( )=1V SR Slew rate at unity gain RL = 10 k, CL = 20 pF pF, See Figure 98 VI(PP) ( ) = 5.5 V Vn Equivalent input noise voltage f = 1 kHz,, See Figure 99 RS = 20 ,, BOM Maximum output-swing bandwidth VO = VOH, RL = 10 k, k CL = 20 pF, F See Figure 98 VI = 10 mV, V See Figure 100 CL = 20 pF, F B1 m Unity-gain bandwidth Phase margin f = B1, CL = 20 pF, F, POST OFFICE BOX 655303 mV VI = 10 mV, See Figure 100 * DALLAS, TEXAS 75265 TA TLC271M MIN TYP 25C 5.3 - 55C 7.1 125C 3.1 25C 4.6 - 55C 6.1 125C 2.7 25C 25 25C 200 - 55C 280 125C 110 25C 2.2 - 55C 3.4 125C 1.6 25C 49 - 55C 52 125C 44 MAX UNIT V/s nV/H nV/Hz kHz MHz 11 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (HIGH-BIAS MODE) Table of Graphs FIGURE 12 VIO VIO Input offset voltage Distribution 2, 3 Temperature coefficient Distribution 4, 5 VOH High-level g output voltage g High-level output vs High level out ut current vs Supply y voltage g vs Free-air temperature 6, 7 8 9 VOL Low level output voltage Low-level vs Common-mode Common mode input in ut voltage vs Differential input voltage g vs Free-air temperature vs Low-level output current 10, 11 12 13 14, 15 AVD Large-signal g g differential voltage g amplification vs Supply Su ly voltage vs Free-air temperature vs Frequency 16 17 28, 29 IIB IIO Input bias current vs Free-air temperature 18 Input offset current vs Free-air temperature 18 VIC Common-mode input voltage vs Supply voltage 19 IDD Supply current vs Supplyy voltage g vs Free-air temperature 20 21 SR Slew rate vs Supply y voltage g vs Free-air temperature 22 23 Bias-select current vs Supply voltage 24 VO(PP) Maximum peak-to-peak output voltage vs Frequency 25 B1 Unity gain bandwidth Unity-gain vs Free-air temperature vs Supply voltage 26 27 AVD Large-signal differential voltage amplification vs Frequency m Phase margin g vs Supply Su ly voltage vs Free-air temperature vs Capacitive load Vn Equivalent input noise voltage vs Frequency 33 Phase shift vs Frequency 28, 29 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 28, 29 30 31 32 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (HIGH-BIAS MODE) DISTRIBUTION OF TLC271 INPUT OFFSET VOLTAGE Percentage of Units - % 50 IIIIIIIIIIII 60 IIIIIIIIIIIII IIIIIIIIIIIII 753 Amplifiers Tested From 6 Wafer Lots VDD = 10 V 753 Amplifiers Tested From 6 Wafer Lots VDD = 5 V TA = 25C P Package 50 Percentage of Units - % 60 DISTRIBUTION OF TLC271 INPUT OFFSET VOLTAGE 40 30 20 TA = 25C P Package 40 30 20 10 10 0 1 2 3 -5 -4 -3 -2 -1 0 VIO - Input Offset Voltage - mV 4 0 -5 -4 -3 -2 -1 0 1 2 3 VIO - Input Offset Voltage - mV 5 DISTRIBUTION OF TLC271 INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT 40 DISTRIBUTION OF TLC271 INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT IIIIIIIIIIII IIIIIIIIIIII 324 Amplifiers Tested From 8 Wafer Lots VDD = 5 V TA = 25C to 125C P Package Outliers: (1) 20.5 V/C IIIII 60 50 Percentage of Units - % Percentage of Units - % 50 5 Figure 3 Figure 2 60 4 30 20 10 40 IIIIIIIIIIII IIIIIIIIIIII 324 Amplifiers Tested From 8 Wafer lots VDD = 10 V TA = 25C to 125C P Package Outliers: (1) 21.2 V/C IIIII 30 20 10 0 - 10 - 8 - 6 - 4 - 2 0 2 4 6 8 VIO - Temperature Coefficient - V/C 10 0 - 10 - 8 - 6 - 4 - 2 0 2 4 6 8 VIO - Temperature Coefficient - V/C Figure 4 10 Figure 5 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 13 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (HIGH-BIAS MODE) HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT 16 VID = 100 mV TA = 25C VOH VOH - High-Level Output Voltage - V VOH VOH - High-Level Output Voltage - V 5 4 VDD = 5 V 3 VDD = 4 V VDD = 3 V 2 AAA AAA AAA VDD = 16 V 0 -2 -4 -6 -8 IOH - High-Level Output Current - mA 10 IIIII IIIII 8 VDD = 10 V 6 4 2 0 - 10 0 -5 - 15 - 20 - 25 - 30 - 35 - 40 Figure 7 HIGH-LEVEL OUTPUT VOLTAGE vs SUPPLY VOLTAGE HIGH-LEVEL OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE 16 VDD - 1.6 VID = 100 mV RL = 10 k TA = 25C 14 VOH - High-Level Output Voltage - V VOH VOH - High-Level Output Voltage - V VOH - 10 IOH - High-Level Output Current - mA Figure 6 12 10 AA AA VID = 100 mV TA = 25C 12 AA AA AA 1 0 14 8 6 - 1.7 VDD = 5 V IOH = - 5 mA VID = 100 mA - 1.8 - 1.9 -2 VDD = 10 V - 2.1 AA AA 4 2 0 0 2 4 6 8 10 12 VDD - Supply Voltage - V 14 16 - 2.2 - 2.3 - 2.4 - 75 - 50 - 25 0 20 50 75 100 TA - Free-Air Temperature - C Figure 8 Figure 9 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 14 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 125 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (HIGH-BIAS MODE) LOW-LEVEL OUTPUT VOLTAGE vs COMMON-MODE INPUT VOLTAGE 500 VDD = 5 V IOL = 5 mA TA = 25C 650 VOL VOL - Low-Level Output Voltage - mV VOL VOL- Low-Level Output Voltage - mV 700 LOW-LEVEL OUTPUT VOLTAGE vs COMMON-MODE INPUT VOLTAGE 600 IIIIII IIIIII 550 VID = - 100 mV 500 450 AA AA 450 400 VID = - 100 mV VID = - 1 V 350 VID = - 2.5 V AAA AAA 400 VID = - 1 V 350 300 0 VDD = 10 V IOL = 5 mA TA = 25C 1 2 3 VIC - Common-Mode Input Voltage - V 300 250 4 0 1 3 5 7 9 2 4 6 8 VIC - Common-Mode Input Voltage - V Figure 11 Figure 10 LOW-LEVEL OUTPUT VOLTAGE vs DIFFERENTIAL INPUT VOLTAGE LOW-LEVEL OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE 900 IOL = 5 mA VIC = VID/2 TA = 25C 700 VOL VOL - Low-Level Output Voltage - mV VOL VOL- Low-Level Output Voltage - mV 800 600 IIII IIII 500 VDD = 5 V 400 300 AA AA 10 VDD = 10 V AA AA 200 100 0 0 -1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 VID - Differential Input Voltage - V 800 IOL = 5 mA VID = - 1 V VIC = 0.5 V 700 IIII VDD = 5 V 600 500 IIII IIII 400 VDD = 10 V 300 200 100 0 - 75 - 50 Figure 12 - 25 0 25 50 75 100 TA - Free-Air Temperature - C 125 Figure 13 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 15 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (HIGH-BIAS MODE) LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 3 VID = - 1 V VIC = 0.5 V TA = 25C 0.9 0.8 VOL VOL - Low-Level Output Voltage - mV VOL VOL- Low-Level Output Voltage - mV 1 IIII IIII IIII VDD = 5 V 0.7 VDD = 4 V 0.6 VDD = 3 V 0.5 0.4 AA AA AA 0.3 AA AA 0.2 0.1 0 0 1 2 3 4 5 6 7 IOL - Low-Level Output Current - mA 8 VID = -1 V VIC = 0.5 V TA = 25C 2.5 2 VDD = 10 V 1.5 1 0.5 0 0 5 10 15 20 25 IOL - Low-Level Output Current - mA LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs SUPPLY VOLTAGE AVD AVD- Large-Signal Differential Voltage Amplification - V/mV AA AA AA 50 40 III III III III 0C 85C 30 125C AA AA AA 20 10 0 2 4 6 8 10 12 VDD - Supply Voltage - V 14 RL = 10 k 45 25C 0 IIIII IIIII 50 TA = - 55C AVD AVD- Large-Signal Differential Voltage Amplification - V/mV IIII IIII RL = 10 k 16 40 VDD = 10 V 35 30 25 20 VDD = 5 V 15 10 5 0 - 75 - 50 Figure 16 - 25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 17 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 16 30 Figure 15 Figure 14 60 VDD = 16 V POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 125 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (HIGH-BIAS MODE) COMMON-MODE INPUT VOLTAGE (POSITIVE LIMIT) vs SUPPLY VOLTAGE INPUT BIAS CURRENT AND INPUT OFFSET CURRENT vs FREE-AIR TEMPERATURE IIB I IO - Input Bias and IIB and IIO Input Offset Currents - nA VDD = 10 V VIC = 5 V See Note A 1000 100 16 II II IIB 10 V IC - Common-Mode Input Voltage - V AAAA AAAA AAAA 10000 II II IIO 1 TA = 25C 14 12 10 8 6 4 2 0 0.1 25 125 45 65 85 105 TA - Free-Air Temperature - C NOTE A: The typical values of input bias current and input offset current below 5 pA were determined mathematically. 0 2 4 6 8 10 12 VDD - Supply Voltage - V SUPPLY CURRENT vs FREE-AIR TEMPERATURE SUPPLY CURRENT vs SUPPLY VOLTAGE IIII IIII 2 IDD I DD - Supply Current - mA TA =- 55C III 0C 1.5 25C AAA AAA AAA 1 70C 125C 0.5 AA AA AA 0 0 2 IIIII IIIII VO = VDD /2 No Load 4 6 8 10 12 VDD - Supply Voltage - V 14 IDD I DD - Supply Current - mA VO = VDD /2 No Load 2 16 Figure 19 Figure 18 2.5 14 16 1.5 VDD = 10 V 1 VDD = 5 V 0.5 0 - 75 - 50 Figure 20 - 25 0 25 50 75 100 TA - Free-Air Temperature - C 125 Figure 21 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 17 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (HIGH-BIAS MODE) SLEW RATE vs FREE-AIR TEMPERATURE SLEW RATE vs SUPPLY VOLTAGE 8 6 7 SR - Slew Rate - V/ us s SR - Slew Rate - V/ us s 7 5 4 3 5 4 1 1 2 4 6 8 10 12 VDD - Supply Voltage - V 14 VDD = 5 V VI(PP) = 1 V - 50 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY TA = 25C VI(SEL) = 0 Bias-Select Current - ua A - 2.4 - 2.1 - 1.8 - 1.5 - 1.2 - 0.9 - 0.6 - 0.3 0 4 6 8 10 12 VDD - Supply Voltage - V 14 16 VO(PP) - Maximum Peak-to-Peak Output Voltage - V - 3 2 125 Figure 23 BIAS-SELECT CURRENT vs SUPPLY VOLTAGE 0 IIIII IIIII IIIIII IIIIII - 25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 22 - 2.7 IIII VDD = 10 V VI(PP) = 1 V VDD = 5 V VI(PP) = 2.5 V 0 - 75 16 AV = 1 RL = 10 k CL = 20 pF See Figure 99 3 2 0 VDD = 10 V VI(PP) = 5.5 V 6 2 0 IIIII IIIII IIIII 8 AV = 1 VI(PP) = 1 V RL = 10 k CL = 20 pF TA = 25C See Figure 98 IIII IIII 10 VDD = 10 V 9 8 7 6 IIII IIII IIII IIIII IIIII 5 IIII IIII IIII TA = 125C TA = 25C TA = 55C VDD = 5 V 4 3 RL = 10 k See Figure 98 2 1 0 10 Figure 24 100 1000 f - Frequency - kHz 10000 Figure 25 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 18 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (HIGH-BIAS MODE) UNITY-GAIN BANDWIDTH vs FREE-AIR TEMPERATURE 2.5 VDD = 5 V VI = 10 mV CL = 20 pF See Figure 100 B1 B1 - Unity-Gain Bandwidth - MHz B1 B1 - Unity-Gain Bandwidth - MHz 3 UNITY-GAIN BANDWIDTH vs SUPPLY VOLTAGE 2.5 2 1.5 1 - 75 - 50 - 25 0 25 50 75 100 TA - Free-Air Temperature - C VI = 10 mV CL = 20 pF TA = 25C See Figure 100 2 1.5 1 125 0 2 4 6 8 10 12 VDD - Supply Voltage - V Figure 26 14 16 Figure 27 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY 107 AA AA 105 0 104 30 AVD 103 60 102 90 Phase Shift AVD AVD- Large-Signal Differential Voltage Amplification 106 VDD = 5 V RL = 10 k TA = 25C Phase Shift 101 120 1 150 0.1 10 100 1k 10 k 100 k f - Frequency - Hz 1M 180 10 M Figure 28 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 19 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (HIGH-BIAS MODE) LARGE-SCALE DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY 107 VDD = 10 V RL = 10 k TA = 25C AA AA 105 0 104 30 AVD 103 60 102 90 Phase Shift AVD AVD- Large-Signal Differential Voltage Amplification 106 Phase Shift 101 120 1 150 0.1 100 10 1k 10 k 100 k f - Frequency - Hz 1M 180 10 M Figure 29 PHASE MARGIN vs SUPPLY VOLTAGE PHASE MARGIN vs FREE-AIR TEMPERATURE 53 50 VDD = 5 V VI = 10 mV CL = 20 pF See Figure 100 52 48 m m - Phase Margin m m - Phase Margin 51 50 49 AA AA AA AA 48 VI = 10 mV CL = 20 pF TA = 25C See Figure 100 47 46 45 0 2 4 6 8 10 12 VDD - Supply Voltage - V 14 16 46 44 42 40 - 75 - 50 - 25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 31 Figure 30 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 20 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 125 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (HIGH-BIAS MODE) 50 VDD = 5 mV VI = 10 mV TA = 25C See Figure 100 m m - Phase Margin 45 AA AA AA AA 40 AA AA 35 30 25 0 20 40 60 80 CL - Capacitive Load - pF 100 VN nV/ Hz V n- Equivalent Input Noise Voltage - nV/Hz PHASE MARGIN vs CAPACITIVE LOAD EQUIVALENT NOISE VOLTAGE vs FREQUENCY AAAAA AAAAA AAAAA AAAAA 400 VDD = 5 V RS = 20 TA = 25C See Figure 99 350 300 250 200 150 100 50 0 1 Figure 32 10 100 f - Frequency - Hz 1000 Figure 33 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 21 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 MEDIUM-BIAS MODE electrical characteristics at specified free-air temperature (unless otherwise noted) TLC271C, TLC271AC, TLC271BC PARAMETER TEST CONDITIONS TLC271C VIO Input offset voltage TLC271AC VO = 1 1.4 4V V, VIC = 0 RS = 50 , RI = 100 k TLC271BC TA VDD = 5 V MIN TYP MAX VDD = 10 V MIN TYP MAX 25C 1.1 1.1 Full range 10 12 25C 0.9 Full range 0.25 Full range 5 0.9 2 0.26 3 VIO IIO Input offset current (see Note 4) VO = VDD /2,, VIC = VDD /2 25C 0.1 60 0.1 60 70C 7 300 7 300 IIB Input bias current (see Note 4) VO = VDD /2,, VIC = VDD /2 25C 0.6 60 0.7 60 70C 40 600 50 600 VOH VOL AVD CMRR 25C - 0.2 to 4 Full range - 0.2 to 3.5 Common-mode input voltage range (see Note 5) High-level output voltage Low-level output voltage L i l diff ti l Large-signal differential voltage am lification amplification Common-mode rejection ratio VID = 100 mV, V RL = 100 k VID = -100 100 mV, V IOL = 0 k RL = 100 k, See Note 6 VIC = VICRmin V/C 2.1 - 0.3 to 4.2 - 0.2 to 9 -0.3 to 9.2 3.2 3.9 8 8.7 0C 3 3.9 7.8 8.7 70C 3 4 7.8 8.7 V 25C 0 50 0 50 0C 0 50 0 50 0 50 0 50 25C 25 170 25 275 0C 15 200 15 320 70C 15 140 15 230 25C 65 91 65 94 0C 60 91 60 94 70C 60 92 60 94 25C 70 93 70 93 0C 60 92 60 92 70C 60 94 60 94 dB II(SEL) Input current (BIAS SELECT) VI(SEL) = VDD /2 25C - 130 105 280 143 300 Supply current VO = VDD /2, VIC = VDD /2, No load 25C IDD 0C 125 320 173 400 70C 85 220 110 280 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 dB - 160 Full range is 0C to 70C. NOTES: 4. The typical values of input bias current and input offset current below 5 pA were determined mathematically. 5. This range also applies to each input individually. 6. At VDD = 5 V, VO = 0.25 V to 2 V; at VDD = 10 V, VO = 1 V to 6 V. mV V/mV VDD = 5 V to t 10 V VO = 1 1.4 4V 22 pA V Supply-voltage S l lt rejection j ti ratio ti (VDD /VIO) kSVR pA V - 0.2 to 8.5 25C 70C mV 2 Average temperature coefficient of input offset voltage VICR 1.7 5 6.5 3 25C to 70C 10 12 6.5 25C UNIT nA A TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 MEDIUM-BIAS MODE electrical characteristics at specified free-air temperature (unless otherwise noted) TLC271I, TLC271AI, TLC271BI TEST CONDITIONS PARAMETER TLC271I VIO Input offset voltage TLC271AI VO = 1 1.4 4V V, VIC = 0 V,, RS = 50 , RL = 100 k TLC271BI TA VDD = 5 V MIN TYP MAX VDD = 10 V MIN TYP MAX 25C 1.1 1.1 Full range 10 13 25C 0.9 Full range 0.25 Full range 5 0.9 2 0.26 3.5 VIO IIO Input offset current (see Note 4) VO = VDD /2,, VIC = VDD /2 25C 0.1 60 0.1 60 85C 24 1000 26 1000 IIB Input bias current (see Note 4) VO = VDD /2,, VIC = VDD /2 25C 0.6 60 0.7 60 85C 200 2000 220 2000 VOH VOL AVD CMRR - 0.2 to 4 Full range - 0.2 to 3.5 Common-mode input voltage range (see Note 5) High-level output voltage Low-level output voltage L i l diff ti l Large-signal differential voltage am lification amplification Common-mode rejection ratio VID = 100 mV, V RL = 100 k VID = -100 100 mV, V IOL = 0 k RL = 100 k, See Note 6 VIC = VICRmin Supply-voltage S l lt rejection j ti ratio ti (VDD /VIO) VDD = 5 V to t 10 V VO = 1 1.4 4V II(SEL) Input current (BIAS SELECT) VI(SEL) = VDD /2 IDD Supply current VO = VDD /2, VIC = VDD /2, No load kSVR 25C V/C 2.1 - 0.3 to 4.2 - 0.2 to 9 - 0.3 to 9.2 25C 3.2 3.9 8 8.7 3 3.9 7.8 8.7 85C 3 4 7.8 8.7 V 25C 0 50 0 50 - 40C 0 50 0 50 0 50 0 50 25C 25 170 25 275 - 40C 15 270 15 390 85C 15 130 15 220 25C 65 91 65 94 - 40C 60 90 60 93 85C 60 90 60 94 25C 70 93 70 93 - 40C 60 91 60 91 85C 60 94 60 94 - 130 pA V - 40C 25C pA V - 0.2 to 8.5 85C mV 2 Average temperature coefficient of input offset voltage VICR 1.7 5 7 3.5 25C to 85C 10 13 7 25C UNIT mV V/mV dB dB - 160 nA 25C 105 280 143 300 - 40C 158 400 225 450 85C 80 200 103 260 A Full range is - 40C to 85C. NOTES: 4. The typical values of input bias current and input offset current below 5 pA were determined mathematically. 5. This range also applies to each input individually. 6. At VDD = 5 V, VO = 0.25 V to 2 V; at VDD = 10 V, VO = 1 V to 6 V. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 23 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 MEDIUM-BIAS MODE electrical characteristics at specified free-air temperature (unless otherwise noted) TLC271M PARAMETER VIO Input offset voltage TEST CONDITIONS VO = 1.4 V, VIC = 0 V, RS = 50 , RL = 100 k VIO Average temperature coefficient of input offset voltage IIO Input offset current (see Note 4) VO = VDD /2,, VIC = VDD /2 IIB Input bias current (see Note 4) VO = VDD /2,, VIC = VDD /2 VICR VOH VOL AVD CMRR TA VDD = 5 V MIN TYP MAX VDD = 10 V MIN TYP MAX UNIT 25C 1.1 1.1 mV Full range Low-level output voltage Large-signal L i l diff differential ti l voltage am amplification lification Common-mode rejection ratio 12 10 12 25C to 125C 1.7 25C 0.1 60 0.1 60 pA 125C 1.4 15 1.8 15 nA 25C 0.6 60 0.7 60 pA 125C 9 35 10 35 nA 25C 0 to 4 Full range 0 to 3.5 Common-mode input voltage range (see Note 5) High-level output voltage 10 V/C 2.1 - 0.3 to 4.2 0 to 9 - 0.3 to 9.2 V 0 to 8.5 V 25C 3.2 3.9 8 8.7 VID = 100 mV, V RL = 100 k - 55C 3 3.9 7.8 8.6 125C 3 4 7.8 8.6 25C 0 50 0 50 VID = -100 100 mV, V IOL = 0 - 55C 0 50 0 50 125C 0 50 0 50 25C 25 170 25 275 RL = 10 k See Note 6 - 55C 15 290 15 420 125C 15 120 15 190 25C 65 91 65 94 - 55C 60 89 60 93 125C 60 91 60 93 25C 70 93 70 93 - 55C 60 91 60 91 125C 60 94 60 VIC = VICRmin V V/mV dB kSVR S l lt j ti ratio ti Supply-voltage rejection (VDD /VIO) t 10 V VDD = 5 V to VO = 1 1.4 4V II(SEL) Input current (BIAS SELECT) VI(SEL) = VDD /2 25C - 130 VO = VDD /2, VIC = VDD /2, No load 25C 105 280 143 300 - 55C 170 440 245 500 125C 70 180 90 240 IDD Supply current POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 dB 94 - 160 Full range is - 55C to 125C. NOTES: 4. The typical values of input bias current and input offset current below 5 pA were determined mathematically. 5. This range also applies to each input individually. 6. At VDD = 5 V, VO = 0.25 V to 2 V; at VDD = 10 V, VO = 1 V to 6 V. 24 mV nA A TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 MEDIUM-BIAS MODE operating characteristics at specified free-air temperature, VDD = 5 V PARAMETER TEST CONDITIONS TA TLC271C, TLC271AC, TLC271BC MIN VI(PP) ( )=1V SR Slew rate at unity gain RL = 100 k, CL = 20 pF, pF See Figure 98 VI(PP) ( ) = 2.5 V Vn BOM B1 m Equivalent input noise voltage f = 1 kHz, See Figure 99 RS = 20 , Maximum output-swing bandwidth VO = VOH, RL = 100 k k, CL = 20 pF, F See Figure 98 VI = 10 mV, V See Figure 100 CL = 20 pF, F Unity-gain bandwidth Phase margin VI = 10 mV, mV CL = 20 pF F, f = B1, See Figure 100 TYP 25C 0.43 0C 0.46 70C 0.36 25C 0.40 0C 0.43 70C 0.34 25C 32 25C 55 0C 60 70C 50 25C 525 0C 600 70C 400 25C 40 0C 41 70C 39 UNIT MAX V/s nV/Hz kHz kHz operating characteristics at specified free-air temperature, VDD = 10 V PARAMETER TEST CONDITIONS TA TLC271C, TLC271AC, TLC271BC MIN VI(PP) ( )=1V SR Slew rate at unity gain RL = 100 k, CL = 20 pF, pF See Figure 98 VI(PP) ( ) = 5.5 V Vn BOM B1 m Equivalent input noise voltage f = 1 kHz, See Figure 99 RS = 20 , Maximum output-swing bandwidth VO = VOH, RL = 100 k k, CL = 20 pF, F See Figure 98 VI = 10 mV, V See Figure 100 F CL = 20 pF, Unity-gain bandwidth Phase margin VI = 10 mV, mV CL = 20 pF F, POST OFFICE BOX 655303 f = B1, See Figure 100 * DALLAS, TEXAS 75265 TYP 25C 0.62 0C 0.67 70C 0.51 25C 0.56 0C 0.61 70C 0.46 25C 32 25C 35 0C 40 70C 30 25C 635 0C 710 70C 510 25C 43 0C 44 70C 42 UNIT MAX V/s nV/Hz kHz kHz 25 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 MEDIUM-BIAS MODE operating characteristics at specified free-air temperature, VDD = 5 V PARAMETER TEST CONDITIONS TA TLC271I, TLC271AI, TLC271BI MIN VI(PP) ( )=1V SR Slew rate at unity gain RL = 100 k, CL = 20 pF, pF See Figure 98 VI(PP) ( ) = 2.5 V Vn BOM B1 m Equivalent input noise voltage f = 1 kHz, See Figure 99 RS = 20 , Maximum output-swing bandwidth VO = VOH, RL = 100 k k, CL = 20 pF, F See Figure 98 VI = 10 mV, V See Figure 100 CL = 20 pF, F Unity-gain bandwidth Phase margin VI = 10 mV, mV CL = 20 pF F, f = B1, See Figure 100 TYP 25C 0.43 - 40C 0.51 85C 0.35 25C 0.40 - 40C 0.48 85C 0.32 25C 32 25C 55 - 40C 75 85C 45 25C 525 - 40C 770 85C 370 25C 40 - 40C 43 85C 38 UNIT MAX V/s nV/Hz kHz MHz operating characteristics at specified free-air temperature, VDD = 10 V PARAMETER TEST CONDITIONS TA TLC271I, TLC271AI, TLC271BI MIN VI(PP) ( )=1V SR Slew rate at unity gain RL = 100 k, CL = 20 pF, pF See Figure 98 VI(PP) ( ) = 5.5 V Vn BOM B1 m 26 Equivalent input noise voltage f = 1 kHz, See Figure 99 RS = 20 , Maximum output-swing bandwidth VO = VOH,3 3 RL = 100 k k, CL = 20 pF, F See Figure 98 V VI = 10 mV, See Figure 100 F CL = 20 pF, Unity-gain bandwidth Phase margin VI = 10 mV, mV CL = 20 pF F, POST OFFICE BOX 655303 f = B1, See Figure 100 * DALLAS, TEXAS 75265 TYP 25C 0.62 - 40C 0.77 85C 0.47 25C 0.56 - 40C 0.70 85C 0.44 25C 32 25C 35 - 40C 45 85C 25 25C 635 - 40C 880 85C 480 25C 43 - 40C 46 85C 41 UNIT MAX V/s nV/Hz kHz kHz TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 MEDIUM-BIAS MODE operating characteristics at specified free-air temperature, VDD = 5 V PARAMETER TEST CONDITIONS VI(PP) ( )=1V SR Slew rate at unity gain RL = 100 k, CL = 20 pF, pF See Figure 98 VI(PP) ( ) = 2.5 V Vn Equivalent input noise voltage f = 1 kHz, See Figure 99 RS = 20 , BOM Maximum output-swing bandwidth VO = VOH, RL = 100 k k, CL = 20 pF, F See Figure 98 VI = 10 mV, V See Figure 100 CL = 20 pF, F B1 m Unity-gain bandwidth Phase margin mV VI = 10 mV, CL = 20 pF F, f = B1, See Figure 100 TA TLC271M MIN TYP 25C 0.43 - 55C 0.54 125C 0.29 25C 0.40 - 55C 0.50 125C 0.28 25C 32 25C 55 - 55C 80 125C 40 25C 525 - 55C 850 125C 330 25C 40 - 55C 43 125C 36 MAX UNIT V/s nV/Hz kHz kHz operating characteristics at specified free-air temperature, VDD = 10 V PARAMETER TEST CONDITIONS VI(PP) ( )=1V SR Slew rate at unity gain RL = 100 k, CL = 20 pF, pF See Figure 98 VI(PP) ( ) = 5.5 V Vn Equivalent input noise voltage f = 1 kHz, See Figure 99 BOM Maximum output-swing bandwidth VO = VOH, RL = 100 k k, B1 m Unity-gain bandwidth Phase margin VI = 10 mV, V See Figure 100 mV VI = 10 mV, CL = 20 pF F, POST OFFICE BOX 655303 RS = 20 , CL = 20 pF, F See Figure 98 CL = 20 pF, F f = B1, See Figure 100 * DALLAS, TEXAS 75265 TA TLC271M MIN TYP 25C 0.62 - 55C 0.81 125C 0.38 25C 0.56 - 55C 0.73 125C 0.35 25C 32 25C 35 - 55C 50 125C 20 25C 635 - 55C 960 125C 440 25C 43 - 55C 47 125C 39 MAX UNIT V/s nV/Hz kHz kHz 27 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (MEDIUM-BIAS MODE) Table of Graphs FIGURE 28 VIO VIO Input offset voltage Distribution 34, 35 Temperature coefficient Distribution 36, 37 VOH High-level g output voltage g High-level output vs High level out ut current vs Supply y voltage g vs Free-air temperature 38, 39 40 41 VOL Low level output voltage Low-level vs Common-mode Common mode input in ut voltage vs Differential input voltage g vs Free-air temperature vs Low-level output current 42, 43 44 45 46, 47 AVD Large-signal g g differential voltage g amplification vs Supply Su ly voltage vs Free-air temperature vs Frequency 48 49 60, 61 IIB IIO Input bias current vs Free-air temperature 50 Input offset current vs Free-air temperature 50 VI Maximum Input voltage vs Supply voltage 51 IDD Supply current vs Supplyy voltage g vs Free-air temperature 52 53 SR Slew rate vs Supply y voltage g vs Free-air temperature 54 55 Bias-select current vs Supply voltage 56 VO(PP) Maximum peak-to-peak output voltage vs Frequency 57 B1 Unity gain bandwidth Unity-gain vs Free-air temperature vs Supply voltage 58 59 m Phase margin g vs Supply Su ly voltage vs Free-air temperature vs Capacitive load 62 63 64 Vn Equivalent input noise voltage vs Frequency 65 Phase shift vs Frequency 60, 61 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (MEDIUM-BIAS MODE) DISTRIBUTION OF TLC271 INPUT OFFSET VOLTAGE DISTRIBUTION OF TLC271 INPUT OFFSET VOLTAGE Percentage of Units - % 50 40 IIIIIIIIIII IIIIIIIIIII AAAA IIII AAAA IIII AAAA IIII 60 612 Amplifiers Tested From 6 Wafer Lots VDD = 5 V TA = 25C N Package 50 Percentage of Units - % 60 30 20 40 IIII IIIIIIIIIIII AAAA AAAA IIII AAAA IIII AAAA 612 Amplifiers Tested From 6 Wafer Lots VDD = 5 V TA = 25C N Package 30 20 10 10 0 0 -5 -4 -3 -2 -1 0 1 2 3 VIO - Input Offset Voltage - mV 4 -5 5 -4 -3 -2 -1 0 1 2 3 VIO - Input Offset Voltage - mV DISTRIBUTION OF TLC271 INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT DISTRIBUTION OF TLC271 INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT IIIIIIIIIIII IIIIIIIIIIII IIIIIII IIIIIII IIIIIII IIIIIII 60 IIIIIIIIIIII IIIIIIIIIIII IIIIII IIIIII IIIIII IIIIII 60 224 Amplifiers Tested From 6 Water Lots VDD = 5 V TA = 25C to 125C P Package Outliers: (1) 33.0 V/C 50 Percentage of Units - % Percentage of Units - % 40 5 Figure 35 Figure 34 50 4 30 20 10 40 224 Amplifiers Tested From 6 Water Lots VDD = 10 V TA = 25C to 125C P Package Outliers: (1) 34.6 V/C 30 20 10 0 - 10 - 8 - 6 - 4 - 2 0 2 4 6 8 VIO - Temperature Coefficient - V/C 10 0 - 10 - 8 - 6 - 4 - 2 0 2 4 6 8 VIO - Temperature Coefficient - V/C Figure 36 10 Figure 37 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 29 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (MEDIUM-BIAS MODE) HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT 16 5 V VOH OH - High-Level Output Voltage - V V VOH OH - High-Level Output Voltage - V VID = 100 mV TA = 25C 4 VDD = 5 V 3 VDD = 4 V VDD = 3 V 2 AAA AAA VID = 100 mV TA = 25C 14 VDD = 16 V 12 10 8 VDD = 10 V 6 AAA AAA 1 4 2 0 0 0 -2 -4 -6 -8 IOH - High-Level Output Current - mA 0 - 10 - 5 - 10 - 15 - 20 - 25 - 30 - 35 - 40 IOH - High-Level Output Current - mA Figure 39 Figure 38 HIGH-LEVEL OUTPUT VOLTAGE vs SUPPLY VOLTAGE VDD - 1.6 VID = 100 mV RL = 10 k TA = 25C 14 V VOH OH - High-Level Output Voltage - V V VOH OH - High-Level Output Voltage - V 16 HIGH-LEVEL OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE 12 10 AAA AAA AAA 8 6 IOH = - 5 mA VID = 100 mA - 1.7 VDD = 5 V - 1.8 - 1.9 -2 VDD = 10 V - 2.1 AA AA 4 2 0 0 2 4 6 8 10 12 VDD - Supply Voltage - V 14 16 - 2.2 - 2.3 - 2.4 - 75 - 50 - 25 0 20 50 75 100 TA - Free-Air Temperature - C Figure 40 Figure 41 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 30 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 125 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (MEDIUM-BIAS MODE) LOW-LEVEL OUTPUT VOLTAGE vs COMMON-MODE INPUT VOLTAGE 500 VDD = 5 V IOL = 5 mA TA = 25C 650 VOL VOL - Low-Level Output Voltage - mV VOL VOL - Low-Level Output Voltage - mV 700 LOW-LEVEL OUTPUT VOLTAGE vs COMMON-MODE INPUT VOLTAGE 600 IIIIII IIIIII 550 VID = - 100 mV 500 450 AA IIII AA 450 400 VID = - 100 mV VID = - 1 V 350 VID = - 2.5 V AAA AAA 400 VID = - 1 V 350 300 0 VDD = 10 V IOL= 5 mA TA = 25C 1 2 3 VIC - Common-Mode Input Voltage - V 300 250 4 0 1 3 5 6 7 9 2 4 8 VIC - Common-Mode Input Voltage - V Figure 42 Figure 43 LOW-LEVEL OUTPUT VOLTAGE vs DIFFERENTIAL INPUT VOLTAGE 900 IOL = 5 mA VIC = |VID/2| TA = 25C 700 600 500 VDD = 5 V 400 300 AA AA VOL VOL - Low-Level Output Voltage - mV VOL VOL - Low-Level Output Voltage - mV LOW-LEVEL OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE IIIII IIIII IIIII 800 10 800 IOL = 5 mA VID = - 1 V VIC = 0.5 V 700 VDD = 5 V 600 500 400 VDD = 10 V AAA AAA VDD = 10 V 200 100 300 200 100 0 0 -1 -2 -3 -4 -5 -6 -7 -8 VID - Differential Input Voltage - V - 9 - 10 0 - 75 - 50 Figure 44 - 25 0 25 50 75 100 TA - Free-Air Temperature - C 125 Figure 45 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 31 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (MEDIUM-BIAS MODE) LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 1 3 VOL VOL - Low-Level Output Voltage - V VID = - 1 V VIC = 0.5 V TA = 25C 0.9 VOL VOL - Low-Level Output Voltage - V LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 0.8 VDD = 5 V 0.7 VDD = 4 V 0.6 VDD = 3 V 0.5 0.4 AA AA AA 0.3 AA AA 0.2 0.1 0 0 1 2 3 4 5 6 7 IOL - Low-Level Output Current - mA VID = - 1 V VIC = 0.5 V TA = 25C 2.5 VDD = 10 V 1.5 1 0.5 0 8 0 5 10 15 20 25 IOL - Low-Level Output Current - mA Figure 46 AA AA AA 400 IIIII IIIII RL = 100 k LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE 0C 25C 300 70C IIII 85C 200 TA = 125C 150 100 50 AA AA AA 0 0 2 4 6 8 10 12 VDD - Supply Voltage - V 14 RL = 100 k 450 - 40C 350 250 IIIII IIIII IIIII IIIII 500 TA = - 55C AVD AVD- Large-Signal Differential Voltage Amplification - V/mV AVD AVD- Large-Signal Differential Voltage Amplification - V/mV 450 16 400 350 VDD = 10 V 300 250 200 IIIII IIIII 150 VDD = 5 V 100 50 0 - 75 - 50 Figure 48 - 25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 49 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 32 30 Figure 47 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs SUPPLY VOLTAGE 500 VDD = 16 V IIII IIII 2 IIII IIII POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 125 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (MEDIUM-BIAS MODE) INPUT BIAS CURRENT AND INPUT OFFSET CURRENT vs FREE-AIR TEMPERATURE AAAAA AAAAA AAAAA AAAAA 16 IIII TA = 25C VDD = 10 V VIC = 5 V See Note A 14 1000 II VII - Maximum Input Voltage - V V IIB I IO - Input Bias and IIB and IIO Input Offset Currents - pA 10000 MAXIMUM INPUT VOLTAGE vs SUPPLY VOLTAGE IIB 100 III III IIO 10 1 12 10 8 6 4 2 0.1 25 35 45 55 65 75 85 0 95 105 115 125 0 2 TA - Free-Air Temperature - C NOTE A: The typical values of input bias current and input offset current below 5 pA were determined mathematically. 6 8 14 16 SUPPLY CURRENT vs FREE-AIR TEMPERATURE 400 AAAAA AAAAA 250 350 12 Figure 51 SUPPLY CURRENT vs SUPPLY VOLTAGE VO = VDD/2 No Load 10 VDD - Supply Voltage - V Figure 50 VO = VDD/2 No Load 225 TA = -55C 200 300 - 40C 250 0C 200 25C AAA AAA 150 70C 100 125C 50 IIDD DD - Supply Current - mA IIDD DD - Supply Current - mA 4 IIIII IIIII IIII IIII 175 150 VDD = 10 V 125 100 AA AA VDD = 5 V 75 50 25 0 0 2 4 6 8 10 12 VDD - Supply Voltage - V 14 16 0 - 75 - 50 Figure 52 - 25 0 25 50 75 100 TA - Free-Air Temperature - C 125 Figure 53 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 33 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (MEDIUM-BIAS MODE) SLEW RATE vs SUPPLY VOLTAGE AAAAA AAAAA AAAAA AAAAA AAAAA AAAAA 0.9 0.6 0.5 0.7 VDD = 10 V VI(PP) = 1 V 0.6 0.5 AAAA AAAA IIIIIIIIII AAAAA AAAAA 0.4 0.4 VDD = 5 V VI(PP) = 1 V 0.3 0.3 0 2 4 6 8 10 12 VDD - Supply Voltage - V 14 0.2 - 75 16 - 50 TA = 25C VI(SEL) = 1/2 VDD - 210 - 180 - 150 -120 - 90 - 60 -30 0 0 2 4 6 8 10 12 VDD - Supply Voltage - V 14 16 VO(PP) - Maximum Peak-to-Peak Output Voltage - V Bias-Select Current - nA MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY AAAAA AAAAA AAAAA - 240 125 Figure 55 BIAS-SELECT CURRENT vs SUPPLY VOLTAGE - 270 VDD = 5 V VI(PP) = 2.5 V - 25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 54 - 300 AV = 1 RL = 10 k CL = 20 pF See Figure 99 VDD = 10 V VI(PP) = 5.5 V 0.8 SR - Slew Rate - V/ s 0.7 AAAAAAAAA AAAAAAAAA AAAAAAAAA AAAAA IIIIII AAAAA IIIIII 0.9 AV = 1 VI(PP) = 1 V RL = 100 k CL = 20 pF TA = 25C See Figure 99 0.8 SR - Slew Rate - V/ s SLEW RATE vs FREE-AIR TEMPERATURE 10 IIII IIII 9 VDD = 10 V 8 7 6 IIII IIII AAAA AAAA 5 AAAA AAAA AAAA TA = 125C TA = 25C TA = - 55C VDD = 5 V 4 3 RL = 100 k See Figure 99 2 1 0 1 Figure 56 10 100 f - Frequency - kHz 1000 Figure 57 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 34 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (MEDIUM-BIAS MODE) UNITY-GAIN BANDWIDTH vs SUPPLY VOLTAGE UNITY-GAIN BANDWIDTH vs FREE-AIR TEMPERATURE AAAAAA AAAAAA AAAAAA AAAAAA 800 700 VI = 10 mV CL = 20 pF TA = 25C See Figure 101 750 600 500 400 300 - 75 AAAAA AAAAA AAAAA AAAAA 800 VDD = 5 V VI = 10 mV CL = 20 pF See Figure 101 B1 B1- Unity-Gain Bandwidth - MHz B1 B1- Unity-Gain Bandwidth - MHz 900 700 650 600 550 500 450 400 - 50 - 25 0 25 50 75 100 TA - Free-Air Temperature - C 0 125 2 4 6 8 10 12 VDD - Supply Voltage - V 14 16 Figure 59 Figure 58 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY AAAAA AAAAA AAAAA AAAAA III III AA AA AA VDD = 5 V RL = 100 k TA = 25C 106 105 104 0 30 AVD 103 102 60 90 Phase Shift AVD AVD- Large-Signal Differential Voltage Amplification 107 Phase Shift 101 120 1 150 0.1 1 10 100 1k 10 f - Frequency - Hz 100 K 180 1M Figure 60 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 35 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (MEDIUM-BIAS MODE) LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY AAAAA AAAAA IIIII AAAAA AAAAA IIII VDD = 10 V RL = 100 k TA = 25C 106 105 0 104 30 AVD 103 AA AA AA 60 102 90 Phase Shift AVD AVD- Large-Signal Differential Voltage Amplification 107 Phase Shift 101 120 1 150 0.1 1 10 100 1k 10 k f - Frequency - Hz 100 k 180 1M Figure 61 PHASE MARGIN vs SUPPLY VOLTAGE PHASE MARGIN vs FREE-AIR TEMPERATURE 50 45 VI = 10 mV CL = 20 pF TA = 25C See Figure 100 43 m m - Phase Margin m m - Phase Margin 48 VDD = 5 V VI = 10 mV CL = 20 pF See Figure 100 46 AA AA AA 41 AA AA AA 44 42 39 37 40 38 0 2 4 6 8 10 12 VDD - Supply Voltage - V 14 16 35 - 75 - 50 Figure 62 - 25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 63 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 36 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 125 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (MEDIUM-BIAS MODE) 44 VDD = 5 V VI = 10 mV TA = 25C See Figure 100 m m - Phase Margin 42 40 EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY AAA AAA AAA 38 AA AA 36 34 32 30 Vn V n- Equivalent Input Noise Voltage -nV/ nV/Hz Hz PHASE MARGIN vs CAPACITIVE LOAD 300 VDD = 5 V RS = 20 TA = 25C See Figure 99 250 200 150 100 50 0 28 0 20 40 60 80 CL - Capacitive Load - pF 100 1 Figure 64 10 100 f - Frequency - Hz 1000 Figure 65 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 37 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 LOW-BIAS MODE electrical characteristics at specified free-air temperature (unless otherwise noted) TLC271C, TLC271AC, TLC271BC TEST CONDITIONS PARAMETER Input offset voltage TLC271AC VDD = 5 V MIN TYP MAX 25C TLC271C VIO TA VO = 1 1.4 4V V, VIC = 0 V,, RS = 50 , RI = 1 M TLC271BC 1.1 Full range VDD = 10 V MIN TYP MAX 10 1.1 12 25C 0.9 Full range 0.24 Full range 5 0.9 2 0.26 3 VIO IIO Input offset current (see Note 4) VO = VDD /2,, VIC = VDD /2 25C 0.1 60 0.1 60 70C 7 300 8 300 IIB Input bias current (see Note 4) VO = VDD /2,, VIC = VDD /2 25C 0.6 60 0.7 60 70C 40 600 50 600 VOH VOL AVD CMRR kSVR II(SEL) IDD 25C - 0.2 to 4 Full range - 0.2 to 3.5 Common-mode input voltage range (see Note 5) High-level output voltage Low-level output voltage L i l diff ti l Large-signal differential voltage am lification amplification Common-mode rejection ratio VID = 100 mV, V RL= 1 M VID = -100 100 mV, V IOL = 0 M RL= 1 M, See Note 6 VIC = VICRmin - 0.2 to 9 - 0.3 to 9.2 25C 3.2 4.1 8 8.9 0C 3 4.1 7.8 8.9 70C 3 4.2 7.8 8.9 V 25C 0 50 0 50 0C 0 50 0 50 70C 0 50 0 50 25C 50 520 50 870 0C 50 700 50 1030 70C 50 380 50 660 25C 65 94 65 97 0C 60 95 60 97 70C 60 95 60 97 25C 70 97 70 97 0C 60 97 60 97 70C 60 98 60 98 dB Input current (BIAS SELECT) VI(SEL) = VDD 25C 65 VO = VDD /2, VIC = VDD /2, N lload No d 25C 10 17 14 23 0C 12 21 18 33 70C 8 14 11 20 * DALLAS, TEXAS 75265 mV V/mV VDD = 5 V to t 10 V VO = 1 1.4 4V POST OFFICE BOX 655303 pA V Supply-voltage S l lt rejection j ti ratio ti (VDD /VIO) Supply current pA V - 0.2 to 8.5 dB 95 Full range is 0C to 70C. NOTES: 4. The typical values of input bias current and input offset current below 5 pA were determined mathematically. 5. This range also applies to each input individually. 6. At VDD = 5 V, VO = 0.25 V to 2 V; at VDD = 10 V, VO = 1 V to 6 V. 38 V/C 1 - 0.3 to 4.2 mV 2 Average temperature coefficient of input offset voltage VICR 1.1 5 6.5 3 25C to 70C 10 12 6.5 25C UNIT nA A TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 LOW-BIAS MODE electrical characteristics at specified free-air temperature (unless otherwise noted) TLC271I, TLC271AI, TLC271BI TEST CONDITIONS PARAMETER Input offset voltage TLC271AI VDD = 5 V MIN TYP MAX 25C TLC271I VIO TA VO = 1 1.4 4V V, VIC = 0 V,, RS = 50 , RL = 1 M TLC271BI 1.1 Full range VDD = 10 V MIN TYP MAX 10 1.1 13 25C 0.9 Full range 0.24 Full range 5 0.9 2 0.26 3.5 VIO IIO Input offset current (see Note 4) VO = VDD /2,, VIC = VDD /2 25C 0.1 60 0.1 60 85C 24 1000 26 1000 IIB Input bias current (see Note 4) VO = VDD /2,, VIC = VDD /2 25C 0.6 60 0.7 60 85C 200 2000 220 2000 VOH VOL AVD CMRR kSVR II(SEL) IDD 25C - 0.2 to 4 Full range - 0.2 to 3.5 Common-mode input voltage range (see Note 5) High-level output voltage Low-level output voltage L i l diff ti l Large-signal differential voltage am lification amplification Common-mode rejection ratio VID = 100 mV, V RL= 1 M VID = - 100 mV, V IOL = 0 RL= 1 M See Note 6 VIC = VICRmin V/C 1 - 0.3 to 4.2 - 0.2 to 9 - 0.3 to 9.2 pA pA V - 0.2 to 8.5 V 25C 3 4.1 8 8.9 - 40C 3 4.1 7.8 8.9 85C 3 4.2 7.8 8.9 V 25C 0 50 0 50 - 40C 0 50 0 50 85C 0 50 0 50 25C 50 520 50 870 - 40C 50 900 50 1550 85C 50 330 50 585 25C 65 94 65 97 - 40C 60 95 60 97 85C 60 95 60 98 25C 70 97 70 97 - 40C 60 97 60 97 85C 60 98 60 98 mV V/mV dB Supply-voltage S l lt rejection j ti ratio ti (VDD /VIO) VDD = 5 V to t 10 V VO = 1 1.4 4V Input current (BIAS SELECT) VI(SEL) = VDD 25C 65 VO = VDD /2, VIC = VDD /2, N lload No d 25C 10 17 14 23 - 40C 16 27 25 43 85C 17 13 10 18 Supply current mV 2 Average temperature coefficient of input offset voltage VICR 1.1 5 7 3.5 25C to 85C 10 13 7 25C UNIT dB 95 nA A Full range is - 40 to 85C. NOTES: 4. The typical values of input bias current and input offset current below 5 pA were determined mathematically. 5. This range also applies to each input individually. 6. At VDD = 5 V, VO = 0.25 V to 2 V; at VDD = 10 V, VO = 1 V to 6 V. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 39 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 LOW-BIAS MODE electrical characteristics at specified free-air temperature (unless otherwise noted) TLC271M PARAMETER VIO Input offset voltage TEST CONDITIONS VO = 1.4 V, VIC = 0 V, 25C RS = 50 , RL = 1 M Full range VIO Average temperature coefficient of input offset voltage IIO Input offset current (see Note 4) VO = VDD /2,, VIC = VDD /2 IIB Input bias current (see Note 4) VO = VDD /2,, VIC = VDD /2 VICR VOH VOL AVD CMRR TA Low-level output voltage L i l diff ti l Large-signal differential voltage am lification amplification Common-mode rejection ratio 1.1 VDD = 10 V MIN TYP MAX 10 1.1 10 12 12 25C to 125C 1.4 25C 0.1 60 0.1 60 pA 125C 1.4 15 1.8 15 nA 25C 0.6 60 0.7 60 pA 125C 9 35 10 35 nA 25C 0 to 4 Full range 0 to 3.5 25C 3.2 4.1 8 8.9 - 55C 3 4.1 7.8 8.8 125C 3 4.2 7.8 9 VID = 100 mV, V RL= 1 M VID = - 100 mV, V IOL = 0 RL= 1 M M, See Note 6 VIC = VICRmin V/C 1.4 - 0.3 to 4.2 0 to 9 - 0.3 to 9.2 V 0 to 8.5 V V 25C 0 50 0 50 - 55C 0 50 0 50 125C 0 50 0 50 25C 50 520 50 870 - 55C 25 1000 25 1775 125C 25 200 25 380 25C 65 94 65 97 - 55C 60 95 60 97 125C 60 85 60 91 25C 70 97 70 97 - 55C 60 97 60 97 125C 60 98 60 98 dB VDD = 5 V to t 10 V VO = 1 1.4 4V Input current (BIAS SELECT) VI(SEL) = VDD 25C 65 VO = VDD /2, VIC = VDD /2, N lload No d 25C 10 17 14 23 - 55C 17 30 28 48 125C 7 12 9 Full range is - 55C to 125C. NOTES: 4. The typical values of input bias current and input offset current below 5 pA were determined mathematically. 5. This range also applies to each input individually. 6. At VDD = 5 V, VO = 0.25 V to 2 V; at VDD = 10 V, VO = 1 V to 6 V. 15 II(SEL) IDD 40 Supply current POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 mV V/mV Supply-voltage S l lt rejection j ti ratio ti (VDD /VIO) kSVR UNIT mV Common-mode input voltage range (see Note 5) High-level output voltage VDD = 5 V MIN TYP MAX dB 95 nA A TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 LOW-BIAS MODE operating characteristics at specified free-air temperature, VDD = 5 V PARAMETER TEST CONDITIONS TA TLC271C, TLC271AC, TLC271BC MIN VI(PP) ( )=1V SR Slew rate at unity gain RL = 1 M, CL = 20 pF, pF See Figure 98 VI(PP) ( ) = 2.5 V Vn BOM B1 m Equivalent input noise voltage f = 1 kHz, See Figure 99 RS = 20 , Maximum output-swing bandwidth VO = VOH, RL = 1 M M, CL = 20 pF, F See Figure 98 VI = 10 mV, V See Figure 100 CL = 20 pF, F Unity-gain bandwidth Phase margin VI = 10 mV, mV CL = 20 pF F, f = B1, See Figure 100 TYP 25C 0.03 0C 0.04 70C 0.03 25C 0.03 0C 0.03 70C 0.02 25C 68 25C 5 0C 6 70C 4.5 25C 85 0C 100 70C 65 25C 34 0C 36 70C 30 UNIT MAX V/s nV/Hz kHz kHz operating characteristics at specified free-air temperature, VDD = 10 V PARAMETER TEST CONDITIONS TA TLC271C, TLC271AC, TLC271BC MIN VI(PP) ( )=1V SR Slew rate at unity gain RL = 1 M, CL = 20 pF, pF See Figure 98 VI(PP) ( ) = 5.5 V Vn BOM B1 m Equivalent input noise voltage f = 1 kHz, See Figure 99 RS = 20 , Maximum output-swing bandwidth VO = VOH, RL = 1 M M, CL = 20 pF, F See Figure 98 mV VI = 10 mV, See Figure 100 F CL = 20 pF, VI = 10 mV, mV CL = 20 pF F, f = B1, See Figure 100 Unity-gain bandwidth Phase margin POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TYP 25C 0.05 0C 0.05 70C 0.04 25C 0.04 0C 0.05 70C 0.04 25C 68 25C 1 0C 1.3 70C 0.9 25C 110 0C 125 70C 90 25C 38 0C 40 70C 34 UNIT MAX V/s nV/Hz kHz kHz 41 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 LOW-BIAS MODE operating characteristics at specified free-air temperature, VDD = 5 V PARAMETER TEST CONDITIONS TA TLC271I, TLC271AI, TLC271BI MIN VI(PP) ( )=1V SR Slew rate at unity gain RL = 1 M, CL = 20 pF, pF See Figure 98 VI(PP) ( ) = 2.5 V Vn BOM B1 m Equivalent input noise voltage f = 1 kHz, See Figure 99 RS = 20 , Maximum output-swing bandwidth VO = VOH, RL = 1 M M, CL = 20 pF, F See Figure 98 VI = 10 mV, V See Figure 100 CL = 20 pF, F Unity-gain bandwidth Phase margin VI = 10 mV, mV CL = 20 pF F, f = B1, See Figure 100 TYP 25C 0.03 - 40C 0.04 85C 0.03 25C 0.03 - 40C 0.04 85C 0.02 25C 68 25C 5 - 40C 7 85C 4 25C 85 - 40C 130 85C 55 25C 34 - 40C 38 85C 28 UNIT MAX V/s nV/Hz kHz MHz operating characteristics at specified free-air temperature, VDD = 10 V PARAMETER TEST CONDITIONS TA TLC271C, TLC271AC, TLC271BC MIN VI(PP) ( )=1V SR Slew rate at unity gain RL = 1 M, CL = 20 pF, pF See Figure 98 VI(PP) ( ) = 5.5 V Vn BOM B1 m 42 Equivalent input noise voltage f = 1 kHz, See Figure 99 RS = 20 , Maximum output-swing bandwidth VO = VOH, RL = 1 M M, CL = 20 pF, F See Figure 98 VI = 10 mV, V See Figure 100 F CL = 20 pF, Unity-gain bandwidth Phase margin VI = 10 mV,l mV l CL = 20 pF F, POST OFFICE BOX 655303 f = B1, See Figure 100 * DALLAS, TEXAS 75265 TYP 25C 0.05 - 40C 0.06 85C 0.03 25C 0.04 - 40C 0.05 85C 0.03 25C 68 25C 1 - 40C 1.4 85C 0.8 25C 110 - 40C 155 85C 80 25C 38 - 40C 42 85C 32 UNIT MAX V/s nV/Hz kHz MHz TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 LOW-BIAS MODE operating characteristics at specified free-air temperature, VDD = 5 V PARAMETER TEST CONDITIONS VI(PP) ( )=1V SR Slew rate at unity gain RL = 1 M, CL = 20 pF, pF See Figure 98 VI(PP) ( ) = 2.5 V Vn Equivalent input noise voltage f = 1 kHz, See Figure 99 RS = 20 , BOM Maximum output-swing bandwidth VO = VOH, RL = 1 M M, CL = 20 pF, F See Figure 98 VI = 10 mV, V See Figure 100 CL = 20 pF, F B1 m Unity-gain bandwidth Phase margin mV VI = 10 mV, CL = 20 pF F, f = B1, See Figure 100 TA TLC271M MIN TYP 25C 0.03 - 55C 0.04 125C 0.02 25C 0.03 - 55C 0.04 125C 0.02 25C 68 25C 5 - 55C 8 125C 3 25C 85 - 55C 140 125C 45 25C 34 - 55C 39 125C 25 MAX UNIT V/s nV/Hz kHz kHz operating characteristics at specified free-air temperature, VDD = 10 V PARAMETER TEST CONDITIONS VI(PP) ( )=1V SR Slew rate at unity gain RL = 1 M, CL = 20 pF, pF See Figure 98 VI(PP) ( ) = 5.5 V Vn Equivalent input noise voltage f = 1 kHz, See Figure 99 BOM Maximum output-swing bandwidth VO = VOH, RL = 1 M M, B1 m Unity-gain bandwidth Phase margin VI = 10 mV, V See Figure 100 mV VI = 10 mV, CL = 20 pF F, POST OFFICE BOX 655303 RS = 20 , CL = 20 pF, F See Figure 98 CL = 20 pF, F f = B1, See Figure 100 * DALLAS, TEXAS 75265 TA TLC271M MIN TYP 25C 0.05 - 55C 0.06 125C 0.03 25C 0.04 - 55C 0.06 125C 0.03 25C 68 25C 1 - 55C 1.5 125C 0.7 25C 110 - 55C 165 125C 70 25C 38 - 55C 43 125C 29 MAX UNIT V/s nV/Hz kHz kHz 43 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (LOW-BIAS MODE) Table of Graphs FIGURE 44 VIO VIO Input offset voltage Distribution 66, 67 Temperature coefficient Distribution 68, 69 VOH High-level g output voltage g High-level output vs High level out ut current vs Supply y voltage g vs Free-air temperature 70, 71 72 73 VOL Low level output voltage Low-level vs Common-mode Common mode input in ut voltage vs Differential input voltage g vs Free-air temperature vs Low-level output current 74, 75 76 77 78, 79 AVD Large-signal g g differential voltage g amplification vs Supply Su ly voltage vs Free-air temperature vs Frequency 80 81 92, 93 IIB IIO Input bias current vs Free-air temperature 82 Input offset current vs Free-air temperature 82 VI Maximum input voltage vs Supply voltage 83 IDD Supply current vs Supplyy voltage g vs Free-air temperature 84 85 SR Slew rate vs Supply y voltage g vs Free-air temperature 86 87 Bias-select current vs Supply voltage 88 VO(PP) Maximum peak-to-peak output voltage vs Frequency 89 B1 Unity gain bandwidth Unity-gain vs Free-air temperature vs Supply voltage 90 91 m Phase margin g vs Supply Su ly voltage vs Free-air temperature vs Capacitive load 94 95 96 Vn Equivalent input noise voltage vs Frequency 97 Phase shift vs Frequency 92, 93 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (LOW-BIAS MODE) DISTRIBUTION OF TLC271 INPUT OFFSET VOLTAGE Percentage of Units - % 60 IIIIIIIIIIII 70 905 Amplifiers Tested From 6 Wafer Lots VDD = 5 V TA = 25C P Package 50 40 30 20 50 40 30 20 10 10 0 905 Amplifiers Tested From 6 Wafer Lots VDD = 10 V TA = 25C P Package 60 Percentage of Units - % 70 DISTRIBUTION OF TLC271 INPUT OFFSET VOLTAGE -5 -4 -3 -2 -1 0 1 2 3 VIO - Input Offset Voltage - mV 4 0 5 -5 -4 DISTRIBUTION OF TLC271 INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT 70 356 Amplifiers Tested From 8 Wafer Lots VDD = 5 V TA = 25C to 125C P Package Outliers: (1) 19.2 V/C (1) 12.1 V/C 60 Percentage of Units - % Percentage of Units - % 5 DISTRIBUTION OF TLC271 INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT 70 50 4 Figure 67 Figure 66 60 -3 -2 -1 0 1 2 3 VIO - Input Offset Voltage - mV 40 30 20 10 50 40 IIIIII IIIIII 356 Amplifiers Tested From 8 Wafer Lots VDD = 10 V TA = 25C to 125C P Package Outliers: (1) 18.7 V/C (1) 11.6 V/C 30 20 10 0 - 10 - 8 -6 -4 -2 0 2 4 6 8 10 VIO - Temperature Coefficient - V/C 0 2 4 6 8 - 10 - 8 - 6 - 4 - 2 0 VIO - Temperature Coefficient - V/C Figure 68 10 Figure 69 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 45 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (LOW-BIAS MODE) HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT 16 5 4 VDD = 5 V 3 VDD = 4 V AAA AAA AAA VDD = 3 V 2 0 0 VDD = 16 V 12 10 8 VDD = 10 V AA AA AA 1 -2 -4 -6 -8 IOH - High-Level Output Current - mA VID = 100 mV TA = 25C 14 V VOH- OH High-Level Output Voltage - V VOH High-Level Output Voltage - V VOH- VID = 100 mV TA = 25C 6 4 2 0 0 - 10 - 5 - 10 - 15 - 20 - 25 - 30 - 35 IOH - High-Level Output Current - mA Figure 71 Figure 70 HIGH-LEVEL OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE HIGH-LEVEL OUTPUT VOLTAGE vs SUPPLY VOLTAGE - 1.6 VID = 100 mV RL = 1 M TA = 25C 14 V VOH- OH High-Level Output Voltage - V V VOH- OH High-Level Output Voltage - V 16 12 10 AA AA AA 8 6 2 0 2 4 6 8 10 12 VDD - Supply Voltage - V 14 16 IOH = - 5 mA VID = 100 mV - 1.7 VDD = 5 V - 1.8 - 1.9 -2 VDD = 10 V - 2.1 AA AA AA 4 0 - 2.2 - 2.3 - 2.4 - 75 - 50 Figure 72 - 25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 73 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 46 - 40 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 125 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (LOW-BIAS MODE) LOW-LEVEL OUTPUT VOLTAGE vs COMMON-MODE INPUT VOLTAGE LOW-LEVEL OUTPUT VOLTAGE vs COMMON-MODE INPUT VOLTAGE AA AA 500 VDD = 5 V IOL = 5 mA TA = 25C 650 VOL VOL - Low-Level Output Voltage - mV VOL VOL - Low-Level Output Voltage - mV 700 600 IIIIII IIIIII 550 VID = - 100 mV 500 450 450 400 VID = - 100 mV VID = - 1 V 350 VID = - 2.5 V AAA AAA 400 VID = - 1 V 350 300 250 300 0 VDD = 10 V IOL = 5 mA TA = 25C 1 2 3 VIC - Common-Mode Input Voltage - V 4 0 1 3 5 7 9 2 4 6 8 VIC - Common-Mode Input Voltage - V Figure 75 Figure 74 LOW-LEVEL OUTPUT VOLTAGE vs DIFFERENTIAL INPUT VOLTAGE LOW-LEVEL OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE 900 IOL = 5 mA VIC = VID/2 TA = 25C 700 VOL VOL - Low-Level Output Voltage - mV VOL VOL - Low-Level Output Voltage - mV 800 AA AA AA 10 600 IIII IIII 500 VDD = 5 V 400 300 VDD = 10 V 200 100 0 0 -1 AA AA AA - 2 -3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 VID - Differential Input Voltage - V 800 IOL = 5 mA VID = - 1 V VIC = 0.5 V 700 IIII VDD = 5 V 600 500 IIIII IIIII 400 VDD = 10 V 300 200 100 0 - 75 - 50 Figure 76 - 25 0 25 50 75 100 TA - Free-Air Temperature - C 125 Figure 77 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 47 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (LOW-BIAS MODE) LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 1 3 0.8 VOL VOL - Low-Level Output Voltage - V VID = - 1 V VIC = 0.5 V TA = 25C 0.9 VOL VOL - Low-Level Output Voltage - V LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT VDD = 5 V 0.7 VDD = 4 V 0.6 VDD = 3 V 0.5 AA AA AA 0.4 0.3 2.5 0.1 0 0 1 2 3 4 5 6 7 VDD = 16 V 2 VDD = 10 V 1.5 AA AA 0.2 VID = - 1 V VIC = 0.5 V TA = 25C 1 0.5 0 8 0 5 10 15 20 25 IOL - Low-Level Output Current - mA IOL - Low-Level Output Current - mA Figure 78 Figure 79 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs SUPPLY VOLTAGE IIIII IIIII AVD AVD- Large-Signal Differential Voltage Amplification - V/mV TA = - 55C 1600 1400 TA = 0C 1200 AA AA AA AA AA 70C 800 85C 600 400 1600 1400 III III IIIAA AA AA AA AA 25C 1000 RL = 1 M 1800 - 40C AVD AVD- Large-Signal Differential Voltage Amplification - V/mV RL = 1 M IIIII IIIII 2000 2000 1800 VDD = 10 V 1200 1000 800 600 VDD = 5 V 400 125C 200 0 0 2 4 6 8 10 12 VDD - Supply Voltage - V 14 16 200 0 - 75 - 50 Figure 80 - 25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 81 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 48 30 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 125 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (LOW-BIAS MODE) INPUT BIAS CURRENT AND INPUT OFFSET CURRENT vs FREE-AIR TEMPERATURE AAAA AAAA AAAA IIB I IO - Input Bias and IIB and IIO Input Offset Currents - pA 1000 IIII IIII 16 VDD = 10 V VIC = 5 V See Note A TA = 25C 14 II II IIB 100 VII - Maximum Input Voltage - V V 10000 MAXIMUM INPUT VOLTAGE vs SUPPLY VOLTAGE II II IIO 10 1 12 10 8 6 4 2 0.1 25 35 45 55 65 75 85 0 95 105 115 125 0 2 TA - Free-Air Temperature - C NOTE A: The typical values of input bias current and input offset current below 5 pA were determined mathematically. 6 8 10 16 SUPPLY CURRENT vs FREE-AIR TEMPERATURE 30 45 VO = VDD/2 No Load TA = - 55C VO = VDD/2 No Load III 35 - 40C 30 25 0C III 20 AA AA 25C 15 70C 10 125C 5 2 4 6 8 10 12 VDD - Supply Voltage - V 14 mA A IIDD DD - Supply Current - 25 mA A IIDD DD - Supply Current - 14 Figure 83 SUPPLY CURRENT vs SUPPLY VOLTAGE 0 0 12 VDD - Supply Voltage - V Figure 82 40 4 AA AA 16 20 VDD = 10 V 15 10 VDD = 5 V 5 0 - 75 - 50 Figure 84 - 25 0 25 50 75 100 TA - Free-Air Temperature - C 125 Figure 85 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 49 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (LOW-BIAS MODE) SLEW RATE vs SUPPLY VOLTAGE 0.07 0.07 AV = 1 VI(PP) = 1 V RL = 1 M CL = 20 pF TA= 25C See Figure 98 0.05 VDD = 10 V VI(PP) = 5.5 V 0.06 SR - Slew Rate - V/s s 0.06 SR - Slew Rate - V/s s SLEW RATE vs FREE-AIR TEMPERATURE 0.04 0.03 0.02 0.01 0.05 VDD = 10 V VI(PP) = 1 V 0.04 0.03 VDD = 5 V VI(PP) = 1 V 0.02 VDD = 5 V VI(PP) = 2.5 V 0.01 0.00 0 2 4 6 8 10 12 VDD - Supply Voltage - V 14 16 0.00 - 75 - 50 Figure 86 VO(PP) - Maximum Peak-to-Peak Output Voltage - V IIIIII IIIIII TA = 25C VI(SEL) = VDD Bias-Select Current - nA 120 105 90 75 60 45 30 15 0 2 4 6 8 10 12 VDD - Supply Voltage - V 14 16 10 AA 9 8 VDD = 10 V 7 6 5 AAAA AAAA AAAA TA = 125C TA = 25C TA = -55C VDD = 5 V 4 AAAAA AAAAA AAAAA 3 RL = 1 M See Figure 98 2 1 0 0.1 Figure 88 1 10 f - Frequency - kHz Figure 89 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 50 125 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY 150 0 - 25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 87 BIAS-SELECT CURRENT vs SUPPLY VOLTAGE 135 RL = 1 M CL = 20 pF AV = 1 See Figure 98 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 100 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (LOW-BIAS MODE) UNITY-GAIN BANDWIDTH vs FREE-AIR TEMPERATURE 140 VDD = 5 V VI = 10 mV CL = 20 pF See Figure 100 130 130 B1 B1 - Unity-Gain Bandwidth - kHz B1 B1 - Unity-Gain Bandwidth - kHz 150 UNITY-GAIN BANDWIDTH vs SUPPLY VOLTAGE 110 90 70 50 120 110 VI = 10 mV CL = 20 pF TA = 25C See Figure 100 IIIIII IIIIII 100 90 80 70 60 30 - 75 50 - 50 - 25 0 25 50 75 100 TA - Free-Air Temperature - C 125 0 2 4 6 8 10 12 VDD - Supply Voltage - V 14 16 Figure 91 Figure 90 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY 107 VDD = 5 V RL = 1 M TA = 25C AA AA AA 105 III III IIIII IIIII 104 0 30 AVD 103 102 60 90 Phase Shift AVD AVD - Large-Signal Differential Voltage Amplification 106 Phase Shift 101 120 1 0.1 150 1 10 100 1k 10 k f - Frequency - Hz 100 k 180 1M Figure 92 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 51 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (LOW-BIAS MODE) LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY 107 VDD = 10 V RL = 1 M TA = 25C AA AA 105 0 IIII 104 30 AVD 103 60 IIIII IIIII 102 90 Phase Shift AVD AVD - Large-Signal Differential Voltage Amplification 106 Phase Shift 101 1 0.1 1 10 120 150 100 1k 10 k f - Frequency - Hz 100 k 180 1M Figure 93 PHASE MARGIN vs SUPPLY VOLTAGE PHASE MARGIN vs FREE-AIR TEMPERATURE 42 40 VI = 10 mV CL = 20 pF TA = 25C See Figure 100 AA AA 36 38 m m - Phase Margin m m - Phase Margin 40 VDD = 5 mV VI = 10 mV CL = 20 pF See Figure 100 38 36 34 32 30 AA AA 34 28 26 24 32 22 30 0 2 4 6 8 10 12 VDD - Supply Voltage - V 14 16 20 - 75 - 50 - 25 0 25 50 75 100 TA - Free-Air Temperature - C 125 Figure 95 Figure 94 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 52 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 TYPICAL CHARACTERISTICS (LOW-BIAS MODE) 37 VDD = 5 mV VI = 10 mV TA = 25C See Figure 100 m m - Phase Margin 35 33 AA AA AA AA 31 AA AA 29 27 25 0 10 20 30 40 50 60 70 80 CL - Capacitive Load - pF 90 100 VN nV/ Hz V n - Equivalent Input Noise Voltage - nV/Hz PHASE MARGIN vs CAPACITIVE LOAD EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY AAAAA AAAAA AAAAA IIIII AAAAA 200 VDD = 5 V RS = 20 TA = 25C See Figure 99 175 150 125 100 75 50 25 0 1 Figure 96 10 100 f - Frequency - Hz 1000 Figure 97 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 53 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 PARAMETER MEASUREMENT INFORMATION single-supply versus split-supply test circuits Because the TLC271 is optimized for single-supply operation, circuit configurations used for the various tests often present some inconvenience since the input signal, in many cases, must be offset from ground. This inconvenience can be avoided by testing the device with split supplies and the output load tied to the negative rail. A comparison of single-supply versus split-supply test circuits is shown below. The use of either circuit gives the same result. VDD VDD + - - VO VO + CL + VI VI RL CL RL VDD - (a) SINGLE SUPPLY (b) SPLIT SUPPLY Figure 98. Unity-Gain Amplifier 2 k 2 k VDD 20 VDD + - - 1/2 VDD VO VO + + 20 20 20 VDD - (a) SINGLE SUPPLY (b) SPLIT SUPPLY Figure 99. Noise-Test Circuit 10 k VDD VDD + 100 - 100 - VI 10 k VI VO VO + + 1/2 VDD CL CL VDD - (a) SINGLE SUPPLY (b) SPLIT SUPPLY Figure 100. Gain-of-100 Inverting Amplifier 54 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 PARAMETER MEASUREMENT INFORMATION input bias current Because of the high input impedance of the TLC271 operational amplifiers, attempts to measure the input bias current can result in erroneous readings. The bias current at normal room ambient temperature is typically less than 1 pA, a value that is easily exceeded by leakages on the test socket. Two suggestions are offered to avoid erroneous measurements: 1. Isolate the device from other potential leakage sources. Use a grounded shield around and between the device inputs (see Figure 101). Leakages that would otherwise flow to the inputs are shunted away. 2. Compensate for the leakage of the test socket by actually performing an input bias current test (using a picoammeter) with no device in the test socket. The actual input bias current can then be calculated by subtracting the open-socket leakage readings from the readings obtained with a device in the test socket. One word of caution: many automatic testers as well as some bench-top operational amplifier testers us the servo-loop technique with a resistor in series with the device input to measure the input bias current (the voltage drop across the series resistor is measured and the bias current is calculated). This method requires that a device be inserted into the test socket to obtain a correct reading; therefore, an open-socket reading is not feasible using this method. 8 5 V = VIC 1 4 Figure 101. Isolation Metal Around Device inputs (JG and P packages) low-level output voltage To obtain low-supply-voltage operation, some compromise is necessary in the input stage. This compromise results in the device low-level output being dependent on both the common-mode input voltage level as well as the differential input voltage level. When attempting to correlate low-level output readings with those quoted in the electrical specifications, these two conditions should be observed. If conditions other than these are to be used, please refer to the Typical Characteristics section of this data sheet. input offset voltage temperature coefficient Erroneous readings often result from attempts to measure temperature coefficient of input offset voltage. This parameter is actually a calculation using input offset voltage measurements obtained at two different temperatures. When one (or both) of the temperatures is below freezing, moisture can collect on both the device and the test socket. This moisture results in leakage and contact resistance which can cause erroneous input offset voltage readings. The isolation techniques previously mentioned have no effect on the leakage since the moisture also covers the isolation metal itself, thereby rendering it useless. It is suggested that these measurements be performed at temperatures above freezing to minimize error. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 55 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 PARAMETER MEASUREMENT INFORMATION full-power response Full-power response, the frequency above which the amplifier slew rate limits the output voltage swing, is often specified two ways: full-linear response and full-peak response. The full-linear response is generally measuredby monitoring the distortion level of the output while increasing the frequency of a sinusoidal input signal until the maximum frequency is found above which the output contains significant distortion. The full-peak response is defined as the maximum output frequency, without regard to distortion, above which full peak-to-peak output swing cannot be maintained. Because there is no industry-wide accepted value for significant distortion, the full-peak response is specified in this data sheet and is measured using the circuit of Figure 98. The initial setup involves the use of a sinusoidal input to determine the maximum peak-to-peak output of the device (the amplitude of the sinusoidal wave is increased until clipping occurs). The sinusoidal wave is then replaced with a square wave of the same amplitude. The frequency is then increased until the maximum peak-to-peak output can no longer be maintained (Figure 102). A square wave is used to allow a more accurate determination of the point at which the maximum peak-to-peak output is reached. (a) f = 100 Hz (b) BOM > f > 100 Hz (c) f = BOM (d) f > BOM Figure 102. Full-Power-Response Output Signal test time Inadequate test time is a frequent problem, especially when testing CMOS devices in a high-volume, short-test-time environment. Internal capacitances are inherently higher in CMOS than in bipolar and BiFET devices, and require longer test times than their bipolar and BiFET counterparts. The problem becomes more pronounced with reduced supply levels and lower temperatures. APPLICATION INFORMATION VDD single-supply operation R4 POST OFFICE BOX 655303 VI R2 VO + 56 R1 - While the TLC271 performs well using dual power supplies (also called balanced or split supplies), the design is optimized for single-supply operation. This includes an input common mode voltage range that encompasses ground as well as an output voltage range that pulls down to ground. The supply voltage range extends down to 3 V (C-suffix types), thus allowing operation with supply levels commonly available for TTL and HCMOS; however, for maximum dynamic range, 16-V single-supply operation is recommended. Vref V R3 C 0.01 F ref V O + VDD R1 R3 ) R3 + (Vref * VI) R4 ) Vref R2 Figure 103. Inverting Amplifier With Voltage Reference * DALLAS, TEXAS 75265 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 APPLICATION INFORMATION single-supply operation (continued) Many single-supply applications require that a voltage be applied to one input to establish a reference level that is above ground. A resistive voltage divider is usually sufficient to establish this reference level (see Figure 103). The low input bias current consumption of the TLC271 permits the use of very large resistive values to implement the voltage divider, thus minimizing power consumption. The TLC271 works well in conjunction with digital logic; however, when powering both linear devices and digital logic from the same power supply, the following precautions are recommended: 1. Power the linear devices from separate bypassed supply lines (see Figure 104); otherwise, the linear device supply rails can fluctuate due to voltage drops caused by high switching currents in the digital logic. 2. Use proper bypass techniques to reduce the probability of noise-induced errors. Single capacitive decoupling is often adequate; however, RC decoupling may be necessary in high-frequency applications. - OUT Logic Logic Logic Power Supply + (a) COMMON SUPPLY RAILS - + OUT Logic Logic Logic Power Supply (b) SEPARATE BYPASSED SUPPLY RAILS (preferred) Figure 104. Common Versus Separate Supply Rails POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 57 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 APPLICATION INFORMATION input offset voltage nulling The TLC271 offers external input offset null control. Nulling of the input off set voltage may be achieved by adjusting a 25-k potentiometer connected between the offset null terminals with the wiper Connected as shown in Figure 105. The amount of nulling range varies with the bias selection. In the high-bias mode, the nulling range allows the maximum offset voltage specified to be trimmed to zero. In low-bias and medium-bias modes, total nulling may not be possible. IIII IIII IIII IIII - IN - VDD N1 OUT N2 + IN + IN - IN + 25 k IIII IIII IIII IIII - OUT N2 + 25 k N1 GND (a) SINGLE SUPPLY (b) SPLIT SUPPLY Figure 105. Input Offset Voltage Null Circuit bias selection Bias selection is achieved by connecting the bias select pin to one of the three voltage levels (see Figure 106). For medium-bias applications, R is recommended that the bias select pin be connected to the mid-point between the supply rails. This is a simple procedure in split-supply applications, since this point is ground. In single-supply applications, the medium-bias mode necessitates using a voltage divider as indicated. The use of large-value resistors in the voltage divider reduces the current drain of the divider from the supply line. However, large-value resistors used in conjunction with a large-value capacitor requires significant time to charge up to the supply midpoint after the supply is switched on. A voltage other than the midpoint may be used if it is within the voltages specified in the table of Figure 106. VDD Low To BIAS SELECT 1 M BIAS MODE Medium Medium VDD 1 V to VDD - 1 V High GND Low High 1 M BIAS-SELECT VOLTAGE (single supply) 0.01 F Figure 106. Bias Selection for Single-Supply Applications 58 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 APPLICATION INFORMATION input characteristics The TLC271 is specified with a minimum and a maximum input voltage that, if exceeded at either input, could cause the device to malfunction. Exceeding this specified range is a common problem, especially in single-supply operation. Note that the lower range limit includes the negative rail, while the upper range limit is specified at VDD - 1 V at TA = 25C and at VDD - 1.5 V at all other temperatures. The use of the polysilicon-gate process and the careful input circuit design gives the TLC271 very good input offset voltage drift characteristics relative to conventional metal-gate processes. Offset voltage drift in CMOS devices is highly influenced by threshold voltage shifts caused by polarization of the phosphorus dopant implanted in the oxide. Placing the phosphorus dopant in a conductor (such as a polysilicon gate) alleviates the polarization problem, thus reducing threshold voltage shifts by more than an order of magnitude. The offset voltage drift with time has been calculated to be typically 0.1 V/month, including the first month of operation. Because of the extremely high input impedance and resulting low bias current requirements, the TLC271 is well suited for low-level signal processing; however, leakage currents on printed circuit boards and sockets can easily exceed bias current requirements and cause a degradation in device performance. It is good practice to include guard rings around inputs (similar to those of Figure 101 in the Parameter Measurement Information section). These guards should be driven from a low-impedance source at the same voltage level as the common-mode input (see Figure 107). The inputs of any unused amplifiers should be tied to ground to avoid possible oscillation. noise performance The noise specifications in operational amplifier circuits are greatly dependent on the current in the first-stage differential amplifier. The low input bias current requirements of the TLC271 results in a very low noise current, which is insignificant in most applications. This feature makes the devices especially favorable over bipolar devices when using values of circuit impedance greater than 50 k, since bipolar devices exhibit greater noise currents. + (a) NONINVERTING AMPLIFIER VO + VO IIII IIII IIII IIII (b) INVERTING AMPLIFIER VI VO + - VI III III III III - VI - III III III III (c) UNITY-GAIN AMPLIFIER Figure 107. Guard-Ring Schemes POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 59 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 APPLICATION INFORMATION feedback IIII IIII IIII IIII - VO + Operational amplifier circuits almost always employ feedback, and since feedback is the first prerequisite for oscillation, a little caution is appropriate. Most oscillation problems result from driving capacitive loads and ignoring stray input capacitance. A small-value capacitor connected in parallel with the feedback resistor is an effective remedy (see Figure 108). The value of this capacitor is optimized empirically. Figure 108. Compensation for Input Capacitance electrostatic discharge protection The TLC271 incorporates an internal electrostatic-discharge (ESD) protection circuit that prevents functional failures at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015.2. Care should be exercised, however, when handling these devices as exposure to ESD may result in the degradation of the device parametric performance. The protection circuit also causes the input bias currents to be temperature dependent and have the characteristics of a reverse-biased diode. latch-up Because CMOS devices are susceptible to latch-up due to their inherent parasitic thyristors, the TLC271 inputs and output were designed to withstand - 100-mA surge currents without sustaining latchup; however, techniques should be used to reduce the chance of latch-up whenever possible. Internal protection diodes should not by design be forward biased. Applied input and output voltage should not exceed the supply voltage by more than 300 mV. Care should be exercised when using capacitive coupling on pulse generators. Supply transients should be shunted by the use of decoupling capacitors (0.1 F typical) located across the supply rails as close to the device as possible. The current path established if latch-up occurs is usually between the positive supply rail and ground and can be triggered by surges on the supply lines and/or voltages on either the output or inputs that exceed the supply voltage. Once latch-up occurs, the current flow is limited only by the impedance of the power supply and the forward resistance of the parasitic thyristor and usually results in the destruction of the device. The chance of latch-up occurring increases with increasing temperature and supply voltages. output characteristics IIII IIII IIII IIII IIII 2.5 V - VI + The output stage of the TLC271 is designed to sink and source relatively high amounts of current (see Typical Characteristics). If the output is subjected to a short-circuit condition, this high current capability can cause device damage under certain conditions. Output current capability increases with supply voltage. VO CL TA = 25C f = 1 kHz VI(PP) = 1 V - 2.5 V Figure 109. Test Circuit for Output Characteristics 60 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 APPLICATION INFORMATION output characteristics (continued) All operating characteristics of the TLC271 were measured using a 20-pF load. The devices drive higher capacitive loads; however, as output load capacitance increases, the resulting response pole occurs at lower frequencies, thereby causing ringing, peaking, or even oscillation (see Figures 110, 111, and 112). In many cases, adding some compensation in the form of a series resistor in the feedback loop alleviates the problem. (a) CL = 20 pF, RL = NO LOAD (b) CL = 130 pF, RL = NO LOAD (c) CL = 150 pF, RL = NO LOAD Figure 110. Effect of Capacitive Loads in High-Bias Mode (a) CL = 20 pF, RL = NO LOAD (b) CL = 170 pF, RL = NO LOAD (c) CL = 190 pF, RL = NO LOAD Figure 111. Effect of Capacitive Loads in Medium-Bias Mode (a) CL = 20 pF, RL = NO LOAD (b) CL = 260 pF, RL = NO LOAD (c) CL = 310 pF, RL = NO LOAD Figure 112. Effect of Capacitive Loads in Low-Bias Mode POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 61 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 APPLICATION INFORMATION output characteristics (continued) Although the TLC271 possesses excellent high-level output voltage and current capability, methods are available for boosting this capability, if needed. The simplest method involves the use of a pullup resistor (RP) connected from the output to the positive supply rail (see Figure 113). There are two disadvantages to the use of this circuit. First, the NMOS pulldown transistor, N4 (see equivalent schematic) must sink a comparatively large amount of current. In this circuit, N4 behaves like a linear resistor with an on-resistance between approximately 60 and 180 , depending on how hard the operational amplifier input is driven. With very low values of RP, a voltage offset from 0 V at the output occurs. Secondly, pullup resistor RP acts as a drain load to N4 and the gain of the operational amplifier is reduced at output voltage levels where N5 is not supplying the output current. VI IIII IIII IIII IIII IIII VDD - IP RP + I )DDI )OI F L P V R VO + IF P -V IP = Pullup current required by the operational amplifier (typically 500 A) R2 IL R1 RL Figure 113. Resistive Pullup to Increase VOH 10 k 10 k 0.016 F 0.016 F 10 k IIII IIII IIII IIII 5V - VI TLC271 + BIAS SELECT 10 k IIII IIII IIII IIII 5V - 10 k TLC271 + BIAS SELECT IIII IIII IIII IIII 5V - TLC271 + Low Pass BIAS SELECT High Pass 5 k Band Pass R = 5 k(3/d-1) (see Note A) NOTE B: d = damping factor, I/O Figure 114. State-Variable Filter 62 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 APPLICATION INFORMATION output characteristics (continued) VO (see Note A) 9V 10 k IIIII IIIII IIIII IIIII IIIII C = 0.1 F 9V - 100 k 10 k BIAS SELECT 9V - TLC271 + IIIII IIIII IIIII IIIII IIIII R2 VO (see Note B) TLC271 + BIAS SELECT F O 1 + 4C(R2) R1 R3 R1, 100 k R3, 47 k NOTES: A. VO(PP) = 8 V B. VO(PP) = 4 V Figure 115. Single-Supply Function Generator POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 63 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 APPLICATION INFORMATION (HIGH-BIAS MODE) IIII IIII IIII IIII 5V - VI - 10 k 100 k TLC271 + BIAS SELECT IIII IIII IIII IIII IIII 5V -5 V - TLC271 + IIII IIII IIII IIII IIII 5V VO BIAS SELECT 10 k -5 V - 10 k 95 k TLC271 + VI + BIAS SELECT R1, 10 k (see Note A) -5 V NOTE A: CMRR adjustment must be noninductive. Figure 116. Low-Power Instrumentation Amplifier IIII IIII IIII IIII IIII 5V - R 10 M R 10 M TLC271 + VI 2C 540 pF VO BIAS SELECT f NOTCH + 2p1RC R/2 5 M C 270 pF C 270 pF Figure 117. Single-Supply Twin-T Notch Filter 64 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 APPLICATION INFORMATION (HIGH-BIAS MODE) VI (see Note A) 1.2 k 100 k IIII IIII IIII IIII 4.7 k - TL431 20 k 0.47 F 1 k TLC271 0.1 F + TIP31 15 BIAS SELECT TIS 193 250 F, 25 V VO (see Note B) - 10 k 47 k 22 k + 110 0.01 F NOTES: A. VI = 3.5 to 15 V B. VO = 2.0 V, 0 to 1 A Figure 118. Logic-Array Power Supply IIII IIII IIII IIII IIII 12 V VI - - TLC271 + IIII IIII IIII IIII IIII 12 V H.P. 5082-2835 BIAS SELECT TLC271 0.5 F Mylar N.O. Reset + VO BIAS SELECT 100 k Figure 119. Positive-Peak Detector POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 65 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 APPLICATION INFORMATION (MEDIUM-BIAS MODE) 1N4148 470 k 100 k 5V IIII IIII IIII IIII - 47 k TLC271 100 k + VO BIAS SELECT 2.5 V R2 68 k 1 F 100 k R1 68 k C2 2.2 nF C1 2.2 nF NOTES: A. VO(PP) = 2 V B. fo 1 + 2p R1R2C1C2 Figure 120. Wein Oscillator 5V 0.01 F 1 M IIII IIII IIII IIII IIII - VI 0.22 F VO TLC271 + 1 M BIAS SELECT 2.5 V 100 k 100 k 10 k 0.1 F Figure 121. Single-Supply AC Amplifier 66 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 APPLICATION INFORMATION (MEDIUM-BIAS MODE) 5V Gain Control 1 M (see Note A) 1 F - + IIII IIII IIII IIII IIII 100 k 1 F - 0.1 F - + 10 k + - TLC271 BIAS SELECT + 1 k 100 k 2.5 V 100 k NOTE A: Low to medium impedance dynamic mike Figure 122. Microphone Preamplifier 10 M IIII IIII IIII IIII VDD 1 k - TLC271 + 15 nF IIII IIII IIII IIII VDD - VO TLC271 BIAS SELECT VDD / 2 VREF 150 pF + BIAS SELECT VDD / 2 100 k NOTES: A. NOTES: VDD = 4 V to 15 V B. Vref = 0 V to VDD - 2 V Figure 123. Photo-Diode Amplifier With Ambient Light Rejection IIIII IIIII IIIII IIIII IIIII 5V VI IS + TLC271 - BIAS SELECT 2N3821 2.5 V R NOTES: A. VI = 0 V TO 3 V V I B. I S R + Figure 124. Precision Low-Current Sink POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 67 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 APPLICATION INFORMATION (LOW-BIAS MODE) III III III III VDD + VI BIAS SELECT TLC271 VI - VDD S1 C A Select AV S1 S2 10 S2 100 C A 90 k X1 TLC4066 1 B 1 9 k X2 Analog Switch 2 2 B 1 k NOTE A: VDD = 5 V to 12 V Figure 125. Amplifier With Digital Gain Selection 5V III III III III + BIAS SELECT TLC271 500 k VO1 - 5V 500 k IIII IIII IIII IIII IIII BIAS SELECT + VO2 TLC271 - 0.1 F 500 k 500 k Figure 126. Multivibrator 68 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TLC271, TLC271A, TLC271B LinCMOS PROGRAMMABLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS090D - NOVEMBER 1987 - REVISED MARCH 2001 APPLICATION INFORMATION (LOW-BIAS MODE) 10 k IIII IIII IIII IIII IIII VDD 20 k BIAS SELECT + VI VO TLC271 - 100 k NOTE A: VDD = 5 V to 16 V Figure 127. Full-Wave Rectifier 10 k III III III III VDD 100 k Set 100 k Reset BIAS SELECT + TLC271 - 33 NOTE A: VDD = 5 V to 16 V Figure 128. Set/Reset Flip-Flop 0.016 F IIII IIII IIII IIII 5V 10 k 10 k + VI 0.016 F BIAS SELECT TLC271 VO - NOTE A: Normalized to FC = 1 kHz and RL = 10 k Figure 129. Two-Pole Low-Pass Butterworth Filter POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 69 PACKAGE OPTION ADDENDUM www.ti.com 23-May-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp TLC271ACD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271ACDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271ACDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271ACDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271ACP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type CU NIPDAU N / A for Pkg Type TLC271ACPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) TLC271ACPSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271ACPSRG4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271AID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271AIDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271AIDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271AIDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271AIP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TLC271AIPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TLC271BCD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271BCDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271BCDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271BCDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271BCP ACTIVE PDIP P 8 50 Pb-Free (RoHS) Addendum-Page 1 CU NIPDAU N / A for Pkg Type (3) Samples (Requires Login) PACKAGE OPTION ADDENDUM www.ti.com 23-May-2012 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TLC271BID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271BIDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271BIDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271BIDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271BIP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TLC271BIPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TLC271CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271CDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271CP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TLC271CPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TLC271CPSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271CPSRG4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271CPW ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271CPWG4 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271CPWLE OBSOLETE TSSOP PW 8 TLC271CPWR ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271CPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 2 Call TI Samples (Requires Login) TLC271BCPE4 TBD (3) Call TI PACKAGE OPTION ADDENDUM www.ti.com 23-May-2012 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271IDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271IP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TLC271IPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TLC271MDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271MDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLC271MJG OBSOLETE CDIP JG 8 Call TI Samples (Requires Login) TLC271ID TBD (3) Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and Addendum-Page 3 PACKAGE OPTION ADDENDUM www.ti.com 23-May-2012 continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 4 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device TLC271ACDR Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLC271ACPSR SO PS 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 TLC271AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLC271BCDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLC271BIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLC271CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLC271CPSR SO PS 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 TLC271CPWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 TLC271IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLC271MDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLC271ACDR SOIC D 8 2500 340.5 338.1 20.6 TLC271ACPSR SO PS 8 2000 367.0 367.0 38.0 TLC271AIDR SOIC D 8 2500 340.5 338.1 20.6 TLC271BCDR SOIC D 8 2500 340.5 338.1 20.6 TLC271BIDR SOIC D 8 2500 340.5 338.1 20.6 TLC271CDR SOIC D 8 2500 340.5 338.1 20.6 TLC271CPSR SO PS 8 2000 367.0 367.0 38.0 TLC271CPWR TSSOP PW 8 2000 367.0 367.0 35.0 TLC271IDR SOIC D 8 2500 340.5 338.1 20.6 TLC271MDR SOIC D 8 2500 367.0 367.0 35.0 Pack Materials-Page 2 MECHANICAL DATA MCER001A - JANUARY 1995 - REVISED JANUARY 1997 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.400 (10,16) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 0.063 (1,60) 0.015 (0,38) 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0-15 0.100 (2,54) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated