P6SMBJ180 – P6SMBJ220CA 1 of 4 © 2003 Won-Top Electronics
P6SMBJ180 – P6SMBJ220CA
600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSO RS
Features
! Glass Passivated Die Construction
! 600W Peak Pulse Power Dissipation B
! 180V – 220V Standoff Voltage
! Uni- and Bi-Directional Versions Available D
! Excellent Clamping Capability A
! Fast Response Time F
! Plastic Case Material has UL Flammability
Classification Rating 94V-O C H G
E
Mechanical Data
! Case: JEDEC DO-214AA Low Profile Molded Plastic
! Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
! Polarity: Cathode Band or Cathode Notch
! Marking:
Unidirectional – Device Code and Cathode Band
Bi directional – Device Code Only
! Weight: 0.093 grams (approx.)
“C” Suffix Designat es Bi-di rectional Devices
“A” Suffix Designates 5% Tolerance Devices
No Suffix Designat es 10% Tol erance Devices
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Characteristic Symbol Value Unit
Peak Pulse Power Dissi pati on 10/ 1000µS Waveform (Note 1, 2) Figure 3 PPPM 600 Minimum W
Peak Pulse Current on 10/1000µS Waveform (Note 1) Figure 4 IPPM See Table 1 A
Peak Forward Surge Current 8. 3m s Single Half Sine-Wave
Superim posed on Rated Load (JEDEC Method) (Note 2, 3) IFSM 100 A
Operating and Storage Temperature Range Tj, TSTG -55 to +150 °C
Note: 1. Non-repetit i ve current pulse, per Figure 4 and derated above TA = 25°C per Figure 1.
2. Mounted on 5.0mm2 (0.013mm thick) land areas.
3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.
WTE
POWER SEMICONDUCTORS
SMB/DO-214AA
Dim Min Max
A3.30 3.94
B4.06 4.70
C1.91 2.11
D0.152 0.305
E5.08 5.59
F2.13 2.44
G0.051 0.203
H0.76 1.27
All Dimensions in mm