To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, afliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Afrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ES1A - ES1D
ES1A-ES1D, Rev. C12010 Fairchild Semiconductor Corporation
Fast Rectifiers
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
Electrical Characteristics TA = 25°C unless otherwise noted
ES1A - ES1D
Features
For surface mount applications.
Glass passivated junction.
Low profile package.
Easy pick and place.
Built-in strain relief.
Superfast recovery times for
high efficiency.
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
SMA/DO-214AC
COLOR BAND DENOTES CATHODE
Thermal Characteristics
Symbol Parameter Value Units
PDPower Dissipation 1.47 W
RθJA Thermal Resistance, Junction to Ambient* 85 °C/W
RθJL Thermal Resistance, Junctio n to Lead* 35 °C/W
Symbol Parameter Device Units
1A 1B
1C 1D
VF Forward Voltage @ 1.0 A 0.92 V
trr Reverse Recovery Time
I
F = 0.5 A, IR = 1.0 A, IRR = 0.25 A 15 ns
IR Reverse Current @ rated VRTA = 25°C
TA = 100°C 5.0
100 µA
µA
CTTotal Capacitance
V
R = 4.0 V, f = 1.0 MHz 7.0 pF
Value
Symbol Parameter 1A 1B 1C 1D Units
VRRM Maximum Repetitive Reverse Voltage 50 100 150 200 V
IF(AV) Average Rectified Forward Current, @ TA=120°C 1.0 A
IFSM Non-repetitive Peak Forward Surge Current
8.3 ms Single Half-Sine-Wave 30 A
Tstg Storage Temperature Range -50 to +150 °C
TJ Operating Junction Temperature -50 to +150 °C
*Device mounted on FR-4 PCB 0.013 mm.
ES1A - ES1D
ES1A-ES1D, Rev. C12010 Fairchild Semiconductor Corporation
Typical Characteristics
Pulse
Generator
(Note 2)
50
NONINDUCTIVE 50
NONINDUCTIVE
DUT
(-)
(+)
OSCILLOSCOPE
(Note 1)
50
NONINDUCTIVE
50V
(approx)
NOTES:
1. Rise time = 7.0 ns max; Input impedance = 1.0 megaohm 22 pf.
2. Rise time = 10 ns max; Source impedance = 50 ohms.
Reverse Recovery Time Characterstic and Test Circuit Diagram
1.0cm SET TIME BASE FOR
trr
+0.5A
0
-0.25A
-1.0A
5/ 10 ns/ cm
12 5102
0 50100
0
5
10
15
20
25
30
Number of Cycles at 60Hz
Peak Forward Surge Current, IFSM [A]
0.4 0.6 0.8 1 1.2 1.4
0.001
0.01
0.1
1
10
Forward Voltage, VF [V]
Forward Current, IF [A]
Pulse Width = 300µµµµs
2% Duty Cycle
T = 25 C
º
A
0 2
0406080100120140
0.1
1
10
100
1000
Percent of Rated Peak Reverse Voltage [%]
Reverse Current, IR [uA]
T = 2 5 C
º
A
T = 7 5 C
º
A
T = 125 C
º
A
025 50 75 100 125 150 175
0
0.25
0.5
0.75
1
1.25
1.5
Ambient Temperature [ºC]
Average Rectified Forward Current, IF [A]
RESISTIVE O R
INDUCTIVE LOAD
P.C.B. MOUNTED
ON 0. 2 x 0. 2"
(5.0 x 5.0 mm)
COPPER PAD AREAS
0.1 1 10 100
0
2
4
6
8
10
12
14
Reverse Voltage, VR [V]
Total Capacitance, CT [pF]
Figure 1. Forward Current Derating Curve Figure 2. Forward Voltage Characteristics
Figure 3. Non-Repetitive Surge Current Figure 4. Reverse Current vs Reverse Voltage
Figure 5. Total Capacitance
2.65
4.30
1.75
2.50 MAX
2.20
1.90
0.30
0.05
B
0.203
0.050
2.05
1.95
A
C
B
1.65
1.20 2.95
2.50
B
5.60
4.80
B
4.75
4.00
A
B
0.41
0.15
1.52
0.75
R0.15 4X
0.45
DETAIL A
SCALE 20 : 1
GAGE PLANE
NOTES:
A. EXCEPT WHERE NOTED, CONFORMS
TO JEDEC DO214 VARIATION AC.
B
DOES NOT COMPLY JEDEC STANDARD
VALUE.
C. ALL DIMENSIONS ARE IN MILLIMETERS.
D. DIMENSIONS ARE EXCLUSIVE OF
BURRS, MOLD FLASH AND TIE BAR
PROTRUSIONS.
E. DIMENSIONS AND TOLERANCE AS
PER ASME Y14.5-2009.
E. LAND PATTERN STD. DIOM5025X231M
F. DRAWING FILENAME: MKT-DO214ACrev2
LAND PATTERN RECOMMENDATION
TOP VIEW
SIDE VIEW
0.13
M
C
B A
0.13
M
C
B A
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81358171050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC