SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES L FEATURES Dry circuit through power ratings . Ultra-rugged construction SPDT & DPDT momentary models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted and unlighted. SPECIFICATIONS Contact ratings (resistive loads): Also see economy ratings N & T in options section. Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life (resistive loads): Operating temperature range: Total travel: Actuation force: (Q) power models - coin silver: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7 Amps at 30 VDC. (B) dry circuit models - gold over nickel over brass: 0.4 VA max. at 20 V max. UL models - coin silver: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). UL file no. E66367. CSA models - coin silver: same ratings as UL models. CSA file no. LR54592-1. 20 milliohms max. at 3 VDC, 0.1 Amp. Greater than 200,000 megohms between terminals & case ground. Greater than 1500 VAC for 1 minute between terminals & case ground. 60,000 cycles min. at full load. -30C to +85C .035" (0.9mm) approx. Single pole: 290 75 grams Double pole: 550 75 grams MATERIALS Contacts: circuit models. Actuator: Bushing: Strap: Case: Terminal seal: Support bracket: Spring mounting bracket: Bezel & cap: Hardware: LED: Coin silver for power,UL & CSA models. Gold over nickel over brass for dry Glass filled polyester, color white Nickel plated brass Stainless steel DAP, color blue Epoxy (standard) Brass or steel, tin plated Stainless steel Nylon. Available in black, red & white. Consult factory for other colors. See 'Miscellaneous' section. Intensity: 2.0 mcd at 10 mA. Forward voltage: 2.0V (3.0V max.). Max. continuous forward current: 15 mA for red, 30 mA for green & 20 mA for yellow. Red is standard. Yellow & green are optional. Specifications are subject to change without notice - consult factory. AGENCY RECOGNITION UL, & CSA. Marking: Switches ordered with '/UL' added at end of model no. are supplied with recognition marked. Switches ordered with '/CSA' added at end of model no. are supplied with recognition marked. ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. 'build your own switch' order format d. Option drawings & information e. Panel cut-outs c. Miscellaneous APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com L55 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES Solder lug terminals - panel mounting POWER CKT. MODEL NO. 810KMZQ UL MODEL NO. 810KMZQ/UL L DOUBLE POLE POWER CKT. MODEL NO. 820KMZQ UL MODEL NO. 820KMZQ/UL Horizontal right angle p.c. terminals p.c. mounting SINGLE POLE DRY CKT. MODEL NO. 810KSAB 810KSA-1B UL MODEL NO. 810KSAQ/UL 810KSA-1Q/UL DOUBLE POLE DRY CKT. MODEL NO. 820KSAB 820KSA-1B L56 UL MODEL NO. 820KSAQ/UL 820KSA-1Q/UL APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES Vertical right angle p.c. terminals - p.c. mounting SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE DRY CKT. MODEL NO. 810KSVB 810KSV-1B 810KSV-2B UL MODEL NO. 810KSVQ/UL 810KSV-1Q/UL 810KSV-2Q/UL L DOUBLE POLE DRY CKT. MODEL NO. 820KSVB 820KSV-1B 820KSV-2B UL MODEL NO. 820KSVQ/UL 820KSV-1Q/UL 820KSV-2 Q/UL Straight p.c. terminals with bracket SINGLE POLE DRY CKT. MODEL NO. 810KSV30B 810KSV40B UL MODEL NO. 810KSV30Q/UL 810KSV40Q/UL DOUBLE POLE DRY CKT. MODEL NO. 820KSV30B 820KSV40B UL MODEL NO. 820KSV30Q/UL 820KSV40Q/UL APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com L57 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES Solder lug terminals - snap-in bezel with outboard LED SINGLE POLE UL MODEL NO. 810K2M1ZQJ6122/UL 810K1M1ZQJ6122/UL DIM. A .100 .010 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE POWER CKT. MODEL NO. 810K2M1ZQJ6122 810K1M1ZQJ6122 Models listed above have black bezel and cap. L DOUBLE POLE POWER CKT. MODEL NO. 820K2M1ZQJ6122 820K1M1ZQJ6122 UL MODEL NO. 820K2M1ZQJ6122/UL 820K1M1ZQJ6122/UL DIM. A .100 .010 Models listed above have black bezel and cap. .512/.517 Solder lug terminals - snap-in bezel SINGLE POLE POWER CKT. MODEL NO. 810K2M1ZQJ8122 810K1M1ZQJ8122 UL MODEL NO. 810K2M1ZQJ8122/UL 810K1M1ZQJ8122/UL DIM. A .100 .010 Models listed above have black bezel and cap. DOUBLE POLE POWER CKT. MODEL NO. 820K2M1ZQJ8122 820K1M1ZQJ8122 UL MODEL NO. 820K2M1ZQJ8122/UL 820K1M1ZQJ8122/UL DIM. A .100 .010 Models listed above have black bezel and cap. .512/.517 L58 APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES Straight p.c. terminals - p.c. mounting bezel SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE DRY CKT. MODEL NO. 810K2M1CBJ8422 810K1M1CBJ8422 UL MODEL NO. 810K2M1CQJ8422/UL 810K1M1CQJ8422/UL DIM. A .100 .010 UL MODEL NO. 820K2M1CQJ8422/UL 820K1M1CQJ8422/UL DIM. A .100 .010 L DOUBLE POLE DRY CKT. MODEL NO. 820K2M1CBJ8422 820K1M1CBJ8422 Models listed above have black bezel and cap. Straight p.c. terminals w/bracket - p.c. mounting bezel SINGLE POLE DRY CKT. MODEL NO. 810K2M1V30BJ8422 810K1M1V30BJ8422 DIM. UL MODEL NO. A 810K2M1V30QJ8422/UL .100 810K1M1V30QJ8422/UL .010 DOUBLE POLE DRY CKT. MODEL NO. 820K2M1V30BJ8422 820K1M1V30BJ8422 DIM. UL MODEL NO. A 820K2M1V30QJ8422/UL .100 820K1M1V30QJ8422/UL .010 Models listed above have black bezel and cap. APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com L59 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES Horizontal right angle p.c. terminals - p.c. mounting bezel DRY CKT. MODEL NO. 810K2M1ABJ8422 810K1M1ABJ8422 UL MODEL NO. 810K2M1AQJ8422/UL 810K1M1AQJ8422/UL DIM. A .100 .010 UL MODEL NO. 820K2M1AQJ8422/UL 820K1M1AQJ8422/UL DIM. A .100 .010 L DOUBLE POLE DRY CKT. MODEL NO. 820K2M1ABJ8422 820K1M1ABJ8422 Models listed above have black bezel and cap. Poles SP SP DP DP Option A A-1 A A-1 Dim. B .148 .164 .250 .266 Dim. C .045 max. .095 max. .300 max. .350 max. Vertical right angle p.c. terminals - p.c. mounting bezel SINGLE POLE DRY CKT. MODEL NO. 810K2M1V-1BJ8422 810K1M1V-1BJ8422 DIM. UL MODEL NO. A 810K2M1V-1QJ8422/UL .100 810K1M1V-1QJ8422/UL .010 DOUBLE POLE DRY CKT. MODEL NO. 820K2M1V-1BJ8422 820K1M1V-1BJ8422 DIM. UL MODEL NO. A 820K2M1V-1QJ8422/UL .100 820K1M1V-1QJ8422/UL .010 Models listed above have black bezel and cap. L60 APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES Snap-in bezel for round hole mounting Self-keying against rotation SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE POWER CKT. MODEL NO. 810K2M1ZQJ9622 810K1M1ZQJ9622 UL MODEL NO. 810K2M1ZQJ9622/UL 810K1M1ZQJ9622/UL DIM. A .100 .010 L DOUBLE POLE POWER CKT. MODEL NO. 820K2M1ZQJ9622 820K1M1ZQJ9622 UL MODEL NO. 820K2M1ZQJ9622/UL 820K1M1ZQJ9622/UL DIM. A .100 .010 Models listed above have black bezel and cap. Additional ordering information: Commonly ordered models are shown above and on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box with brief description - see option dwgs. & info. following. Note: 'NONE' indicates box may be left empty. Model Structure: Series Single pole: 8 1 0 Double pole: 8 2 0 Actuators Bushings K Standard K 1 Short K 2 Medium M M D S Terminations Standard 1/4" thd'd. 1 Short 1/4" thd'd. 1/4" thd'd. w/'D' flat Non-threaded Notes: When bezel is specified and flush cap is desired, specify K1 actuator and M1 bushing. When bezel is specified and raised cap is desired, specify K2 actuator and M1 bushing. Epoxy terminal seal is standard on 800 Series. Options: Bezel& cap (NONE) J 6 1 J 8 1 J 8 4 J 9 6 Bezel color Cap color Approvals (NONE) (NONE) (NONE) 2 Black Snap-in w/LED 2 Black / U L 6 Red Snap-in no LED 6 Red / C S A 8 White P.C. style 8 White Consult factory for other colors. Snap-in (round hole) Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. Contact materials B Z Solder lug Q C Printed circuit G W Wirewrap W 1 Lg. wirewrap N W 3 Sht. wirewrap X Extra lg. wirewrap T Horiz. right angle p.c. terminals: A A - 1 Vertical right angle p.c. terminals: V V - 1 V - 2 Straight p.c. terminals w/brkt.: V 3 0 V 4 0 Gold Coin silver Gold over coin silver Economy gold Economy silver Example of completely specified model number: 820K1M1ZQJ8126/UL/CSA APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com L61 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES MISCELLANEOUS HARDWARE SUPPLIED (See Hardware section of catalog) SWITCH Switches with D option bushings are supplied with (2) A112 Hex Nuts and (1) A115 Lockwasher. CROSS L SECTION Switches with M1 option bushings are supplied with (1) A112 Hex Nut and (1) A115 Lockwasher. COMM NO Note: Switches with non-threaded bushings or bezels supplied without hardware. NC SIDE VIEW SIDE VIEW FRONT VIEW SINGLE POLE DOUBLE POLE SINGLE AND DOUBLE POLE SWITCH BODY SIZES WITH TERMINAL LOCATION DIMENSIONS BUSHING OPTIONS M & M1 D S THREADED THREADED NON-THREADED NOTE: BUSHING M AND ACTUATOR K ARE STANDARD. ACTUATOR/BUSHING OPTIONS BUSHING OPTION DIM. B DIMENSION A ACTUATOR OPTION K K1 K2 M or D S M1 .250 .250 .154 .230 .230 .322 .069 .069 .165 .168 .168 .264 All bushings have 1/4-40 UNS-2A thread except S which is non-threaded. Switch caps for switches without bezels also available see Hardware section of catalog. L62 APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Switches with M option bushings are supplied with (2) A112 Hex Nuts, (1) A115 Lockwasher and (1) A107 Anti-rotate Ring. TYPICAL 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE TERMINATION OPTIONS A A-1 SINGLE POLE HORIZONTAL P.C. MOUNTING SINGLE POLE HORIZONTAL P.C. MOUNTING A A-1 DOUBLE POLE HORIZONTAL P.C. MOUNTING Option V V-1 V-2 Dim. A .550 .500 .500 DOUBLE POLE HORIZONTAL P.C. MOUNTING FRONT VIEW SINGLE POLE V, V-1 & V-2 L FRONT VIEW DOUBLE POLE SIDE VIEW - SINGLE & DOUBLE POLE Dim. B .150 .150 .100 VERTICAL P.C. MOUNTING V30 & V40 PANEL LAYOUT V30 & V40 Option V30 V40 Dim. A .527 .647 Dim. B .024 .048 APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com L63 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES TERMINATION OPTIONS (CONT'D.) C W W1 W3 SOLDER LUG PRINTED CIRCUIT WIREWRAP LONG WIREWRAP SHORT WIREWRAP X L EXTRA LG. WIREWRAP CONTACT MATERIAL OPTIONS B Dry circuit - gold over nickel over brass. RATING: 0.4 Volt-Amps (VA) max. at 20 V max. ELECTRIC LIFE: 60,000 cycles minimum. MECHANICAL LIFE: 500,000 cycles minimum. Q Power circuit - coin silver. RATING: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7 Amps at 30 VDC (resistive loads). ELECTRIC LIFE: 60,000 cycles minimum at full load. G Dry circuit or power circuit - gold over nickel over coin silver. RATINGS & ELECTRIC LIFE: Same as B & Q above - i.e. - can be used in either dry circuit or power circuit, however once used in power circuit, switch cannot be re-used in dry circuit. This option satisfies those customers who have both dry circuit and power circuit requirements, but prefer to inventory only one switch for both. N Dry circuit - gold over nickel over brass. Note- less gold than B option. RATING: 0.4 Volt-Amps (VA) max. at 20 V max. ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute. T Power circuit - Silver plate over brass. RATING: 1 Amp at 125 VAC or 0.5 Amps at 250 VAC (resistive loads). ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute. Solder dipped terminals and custom contact plating available - contact factory. UL & CSA OPTIONS UL For power circuits - coin silver RATING: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). Underwriter Laboratories file no. E66367. Note - applicable only to terminations with coin silver contacts (Q or G options). CSA For power circuits - coin silver RATING: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). Canadian Standards Association file no. LR54592-1. Note - applicable only to terminations with coin silver contacts (Q or G options) as CSA recognizes switches for power applications only. PANEL CUT-OUTS Cut-outs that accept all 1/4-40 threaded bushings: Without keying L64 With A107 anti-rotate With A158 anti-rotate With D bushing ring ring With slotted keyway bushings Accepts all 1/4" nonthreaded bushings APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Z