38 380-018 EMI/RFI Non-Environmental Backshell with Strain Relief Type E - Rotatable Coupling - Low Profile 380 F S 018 M 24 12 D A 6 CONNECTOR DESIGNATORS Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series A-F-H-L-S Connector Designator ROTATABLE COUPLING Strain Relief Style (H, A, M, D) Angle and Profile A = 90 B = 45 S = Straight TYPE E INDIVIDUAL AND/OR OVERALL SHIELD TERMINATION Termination (Note 5) D = 2 Rings T = 3 Rings Basic Part No. Cable Entry (Table X, XI) Finish (Table II) Shell Size (Table I) Length .060 (1.52) Minimum Order Length 2.0 Inch (See Note 4) A Thread (Table I) Length .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) C Typ. (Table I) E (Table III) G (Table III) STYLE 2 (STRAIGHT See Note 1) F (Table III) .88 (22.4) Max H (Table III) Now Available with the "NESTOR" Glenair's Non-Detent, SpringLoaded, Self- Locking Coupling. Add "-445" to Specify This AS85049 Style "N" Coupling Interface. STYLE 2 (45 & 90 See Note 1) STYLE H Heavy Duty (Table X) STYLE A Medium Duty (Table XI) W T Cable Range (c) 2005 Glenair, Inc. V Cable Range STYLE M Medium Duty (Table XI) STYLE D Medium Duty (Table XI) .135 (3.4) Max X Y CAGE Code 06324 Cable Range Y Cable Entry Z Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 38 - Page 84 38 380-018 EMI/RFI Non-Environmental Backshell with Strain Relief Type E - Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. Shell Size Conn. Desig. A-F-L-S H 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Dash No. 04 06 08 10 12 16 20 24 28 32 TABLE III: ELBOW DIMENSIONS E Max .520 (13.2) .615 (15.6) .630 (16.0) .720 (18.3) .905 (23.0) .995 (25.3) .995 (25.3) 1.145 (29.1) 1.145 (29.1) F Max 1.680 (47.2) 1.800 (45.7) 1.820 (46.2) 1.890 (48.0) 1.980 (50.3) 2.150 (54.6) 2.150 (54.6) 2.260 (57.4) 2.260 (57.4) G Max .477 (12.7) .540 (13.7) .602 (15.3) .665 (19.6) .758 (19.2) .946 (24.0) .946 (24.0) 1.040 (26.4) 1.040 (26.4) H Max 1.730 (43.9) 1.730 (43.9) 1.790 (45.5) 1.880 (47.8) 1.990 (50.5) 2.180 (55.4) 2.180 (55.4) 2.330 (59.2) 2.330 (59.2) TABLE X: CABLE ENTRY V Cable Range T Max Max Min Max .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) .250 (6.4) .437 (11.1) .780 (19.8) 1.145 (29.1) .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) .350 (8.9) .625 (15.9) .780 (19.8) 1.332 (33.8) .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) .875 (22.2) 1.250 (31.8) 1.092 (27.7) 2.113 (53.7) 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) TABLE II: STANDARD FINISHES GLENAIR SYMBOL B M NF FINISH Cadmium Plate, Olive Drab Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Designate Symbol T for 3 ring termination of individual and overall braid. Designate D for standard 2 ring termination of individual or overall braid. TABLE XI: CABLE ENTRY Dash Z Y X W Cable Range No. Max Max Max Min ** Max Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3) * Not available in Style M clamp. ** Not Applicable Style D (c) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 38 - Page 85