All Marking Options Single Row Terminal Blocks Marking Options & Accessories Standard Marking Markings are applied directly to the sides of A0, CB0, A1, CB11, A2, LP2, CB2, A3, LP3, CB3, A38, B38, A&B4. Standard characters are white and 1/8" high. Factory may substitute 3/32" high characters. 3 2 1 L1 3 1 2 3 Blocks to be marked on both sides require a different code for each side. Example: "L1" on one side of the block requires "L2" on the other side to ensure common terminal marking. Specify by adding suffix to part number. L2 L3 Special Marking 1 2 3 3 2 1 L1 & LT1 = Upright numerals, numbered from left to right L2 & LT2 = Upright numerals, numbered from right to left L3 = Left lying numerals, numbered from left to right L4 = Right lying numerals, numbered from right to left 134 GND BLU 3 M 4 G 134 INPUT PUT 3AC MB TER L6 & LT6 = Upside down numerals, numbered from left to right MAX A K 20A L5 & LT5 = Upside down numerals, numbered from right to left 5 3 Special markings are available upon request at an additional charge for preparation. Production charges for setup, handling and marking are the same as for standard marking and the same quantity discounts apply. Consult factory L4 L5 for price and delivery. L6 Closed Barrier Terminal Block Marking Options for (CB11, CB2 and CB3) EATON www.eaton.com 25