TVS Diodes Surface Mount > 600W > P6SMB11AT3G Series P6SMB11AT3G Series Pb OBSOLETE/EOL DATE June/30/2018 PCN/ECN# LFPCN41246 REPLACED BY P6SMB Series Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The P6SMB11AT3G series is supplied in the Littelfuse exclusive, cost-effective, highly reliable package and is ideally suited for use in communication systems, automotive, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications. Features * Working Peak Reverse Voltage Range - 9.4 to 77.8 V Maximum Ratings and Thermal Characteristics * Standard Zener Breakdown Voltage Range - 11 to 91 V Parameter Symbol Value Unit Peak Power Dissipation (Note 1) @ TL = 25C, Pulse Width = 1 ms PPK 600 W DC Power Dissipation @ TL = 75C Measured Zero Lead Length (Note 2) PD * ESD Rating of Class 3 (> 16 kV) per Human Body Model * Maximum Clamp Voltage @ Peak Pulse Current Derate Above 75C Thermal Resistance from Junction-to- Lead * Peak Power - 600 W @ 1 ms RJL 3.0 W 40 mW/C 25 C/W 0.55 W 4.4 mW/C 226 C/W -65 to +150 C * Low Leakage < 5 A Above 10 V * UL 497B for Isolated Loop Circuit Protection * Response Time is Typically < 1 ns * These are Pb-Free Devices DC Power Dissipation (Note 3) @ TA = 25C Derate Above 25C PD Thermal Resistance from Junction-to- Ambient R0JA Operating and Storage Temperature Range TJ, Tstg Functional Diagram Bi-directional Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Additional Information 1. 10 X 1000 s, non-repetitive. 2. 1" square copper pad, FR-4 board. 3. FR-4 board, using Littelfuse minimum recommended footprint, as shown in 403A-03 case outline dimensions spec. 4. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. Datasheet Cathode Resources Samples Anode *Please see P6SMB6.8AT3 to P6SMB200AT3 for Unidirectional devices. Uni-directional (c) 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 TVS Diodes Surface Mount > 600W > P6SMB11AT3G Series I-V Curve Characteristics (TA = 25C unless otherwise noted) Symbol IPP IT VC VBR VRWM IR IR VRWM VBR VC IT IPP Parameter IPP Maximum Reverse Peak Pulse Current VC Clamping Voltage @ IPP VRWM Working Peak Reverse Voltage IR Maximum Reverse Leakage Current @ VRWM VBR Breakdown Voltage @ IT IT Test Current eVBR Maximum Temperature Coefficient of VBR (c) 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 TVS Diodes Surface Mount > 600W > P6SMB11AT3G Series Electrical Characteristics (Devices listed in bold, italic are Littelfuse Preferred devices) Device* Device Marking VC @ IPP Breakdown Voltage V RWM (Note 6) IR @ VRWM Volts A MIN NOM VBR @ IT (V) (Note 5) (Note 6) C Typ. VBR (Note 7) @ IT VC IPP MAX mA Volts Amps %/C pF P6SMB11CAT3G 11C 9.4 5 10.5 11.05 11.6 1 15.6 38 0.075 865 P6SMB12CAT3G 12C 10.2 5 11.4 12 12.6 1 16.7 36 0.078 800 P6SMB15CAT3G 15C 12.8 5 14.3 15.05 15.8 1 21.2 28 0.084 645 P6SMB16CAT3G 16C 13.6 5 15.2 16 16.8 1 22.5 27 0.086 610 P6SMB18CAT3G 18C 15.3 5 17.1 18 18.9 1 25.2 24 0.088 545 P6SMB20CAT3G 20C 17.1 5 19 20 21 1 27.7 22 0.09 490 P6SMB22CAT3G 22C 18.8 5 20.9 22 23.1 1 30.6 20 0.09 450 P6SMB24CAT3G 24C 20.5 5 22.8 24 25.2 1 33.2 18 0.094 415 P6SMB27CAT3G 27C 23.1 5 25.7 27.05 28.4 1 37.5 16 0.096 370 P6SMB30CAT3G 30C 25.6 5 28.5 30 31.5 1 41.4 14.4 0.097 335 P6SMB33CAT3G 33C 28.2 5 31.4 33.05 34.7 1 45.7 13.2 0.098 305 P6SMB36CAT3G 36C 30.8 5 34.2 36 37.8 1 49.9 12 0.099 280 P6SMB39CAT3G 39C 33.3 5 37.1 39.05 41 1 53.9 11.2 0.1 260 P6SMB43CAT3G 43C 36.8 5 40.9 43.05 45.2 1 59.3 10.1 0.101 240 P6SMB47CAT3G 47C 40.2 5 44.7 47.05 49.4 1 64.8 9.3 0.101 220 P6SMB51CAT3G 51C 43.6 5 48.5 51.05 53.6 1 70.1 8.6 0.102 205 P6SMB56CAT3G 56C 47.8 5 53.2 56 58.8 1 77 7.8 0.103 185 P6SMB62CAT3G 62C 53 5 58.9 62 65.1 1 85 7.1 0.104 170 P6SMB68CAT3G 68C 58.1 5 64.6 68 71.4 1 92 6.5 0.104 155 P6SMB82CAT3G 82C 70.1 5 77.9 82 86.1 1 113 5.3 0.105 130 4. A transient suppressor is normally selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC or continuous peak operating voltage level. 5. VBR measured at pulse test current IT at an ambient temperature of 25C. 6. Surge current waveform per Figure 2 and derate per Figure 3 of the General Data - 600 Watt at the beginning of this group. 7. Bias Voltage = 0 V, F = 1 MHz, TJ = 25C (c) 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 TVS Diodes Surface Mount > 600W > P6SMB11AT3G Series Ratings and Characteristic Curves Figure 1. Pulse Rating Curve Figure 2. Pulse Waveform 100 NONREPETITIVE PULSE WAVEFORM SHOWN IN FIGURE 2 10 1 0.1 0.1 s1 s1 0 s 100 s 1 ms 10 ms t Figure 3 - Pulse Derating Curve Figure 4. Typical Junction Capacitance vs. Bias Voltage Figure 5. Typical Protection Circuit in in (c) 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 TVS Diodes Surface Mount > 600W > P6SMB11AT3G Series Dimensions Soldering Footrpint HE 2.261 E bD D POLARITY INDICATOR OPTIONAL AS NEEDED (SEE STYLES) A c L Dim A1 Inches Millimeters ORDERING INFORMATION Min Nom Max Min Nom Max A 0.077 0.091 0.097 1.95 2.30 2.47 A1 0.002 0.004 0.008 0.05 0.10 0.20 b 0.077 0.080 0.087 1.96 2.03 2.20 c 0.006 0.009 0.012 0.15 0.23 0.31 D 0.130 0.140 0.156 3.30 3.56 3.95 E 0.160 0.170 0.181 4.06 4.32 4.60 HE 0.205 0.214 0.220 5.21 5.44 5.60 L 0.030 0.040 0.063 0.76 1.02 1.60 L1 0.020 REF Device Package Shipping SMB (Pb-Free) P6SMBxxxAT3G 2,500 / Tape & Reel Flow/Wave Soldering (Solder Dipping) Peak Temperature : 260OC Dipping Time : 10 seconds 0.51 REF NOTES: Physical Specifications 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P. Part Marking System Case Void-free, transfer-molded, thermosetting plastic Polarity Cathode indicated by polarity band Mounting Position Any Finish All external surfaces are corrosion resistant and leads are readily solderable Leads Modified L-Bend providing more contact area to bond pads Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. (c) 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17