5.0SMDJ24A - Littelfuse - Datasheet.Company

Revision: November 15, 2011, 16:49

Speciﬁcations are subject to change without notice.

Transient Voltage Suppression Diodes

Surface Mount – 5000W > 5.0SMDJ series

5.0SMDJ Series

Please refer to http://www.Littelfuse.com/series/5.0SSMDJ.html for current information.

AGENCY AGENCY FILE NUMBER

E230531

5.0SMDJ Series

The 5.0SMDJ series is designed specifically to protect

sensitive electronic equipment from voltage transients

induced by lightning and other transient voltage events.

TVS devices are ideal for the protection of I/O Interfaces,

VCC bus and other vulnerable circuits used in Telecom,

Computer, Industrial and Consumer electronic applications.

Applications

Features

Maximum Ratings and Thermal Characteristics

(TA=25OC unless otherwise noted)

Agency Approvals

• Halogen-Free

• RoHS compliant

• For surface mounted

applications to optimize

board space

• Low prole package

• Built-in strain relief

• Typical maximum

temperature coefcient

ΔVBR = 0.1% x VBR@25°C x ΔT

• Glass passivated chip

junction

• 5000W peak pulse power

capability at 10×1000μs

waveform, repetition rate

(duty cycles):0.01%

• Fast response time:

typically less than 1.0ps

from 0V to BV min

• Excellent clamping

capability

• Low incremental surge

resistance

• Typical IR less than 5µA

above 22V

• High Temperature

soldering guaranteed:

260°C/40 seconds at

terminals

• Plastic package has

Underwriters Laboratory

Flammability 94V-O

• Matte Tin Lead–free Plated

Parameter Symbol Value Unit

Peak Pulse Power Dissipation at

TA=25OC by 10x1000µs waveform

(Fig.1)(Note 1), (Note 2)

PPPM 5000 W

Power Dissipation on innite heat

sink at TA=50OCPM(AV) 6.5 W

Peak Forward Surge Current, 8.3ms

Single Half Sine Wave (Note 3) IFSM 300 A

Maximum Instantaneous Forward

Voltage at 100A for Unidirectional

only

VF5.0 V

Operating Junction and Storage

Temperature Range TJ, TSTG -65 to 150 °C

Typical Thermal Resistance Junction

to Lead RuJL 15 °C/W

Typical Thermal Resistance Junction

to Ambient RuJA 75 °C/W

Notes:

1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.

2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.

3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional

device only,duty cycle=4 per minute maximum.

Description

5.0SMDJ Series

RoHS

Revision: November 15, 2011, 16:49

Speciﬁcations are subject to change without notice.

Transient Voltage Suppression Diodes

Surface Mount – 5000W > 5.0SMDJ series

5.0SMDJ Series

Please refer to http://www.Littelfuse.com/series/5.0SSMDJ.html for current information.

Electrical Characteristics

Part

Number

(Uni)

Part

Number

(Bi)

Marking

Reverse

Stand off

Voltage

(Volts)

Breakdown

Voltage VBR

(Volts) @ IT

Test

Current

(mA)

Maximum

Clamping

Voltage VC

@ Ipp

(V)

Maximum

Peak

Pulse

Current Ipp

(A)

Maximum

Reverse

Leakage IR

@ VR

(µA)

Agency

Approval

UNI BI MIN MAX

5.0SMDJ12A 5.0SMDJ12CA 5PEP 5BEP 12.0 13.30 14.70 10 19.9 252.00 800 X

5.0SMDJ13A 5.0SMDJ13CA 5PEQ 5BEQ 13.0 14.40 15.90 10 21.5 233.00 500 X

5.0SMDJ14A 5.0SMDJ14CA 5PER 5BER 14.0 15.60 17.20 10 23.2 216.00 200 X

5.0SMDJ15A 5.0SMDJ15CA 5PES 5BES 15.0 16.70 18.50 1 24.4 205.00 100 X

5.0SMDJ16A 5.0SMDJ16CA 5PET 5BET 16.0 17.80 19.70 1 26.0 193.00 50 X

5.0SMDJ17A 5.0SMDJ17CA 5PEU 5BEU 1 7. 0 18.90 20.90 1 27.6 181.00 20 X

5.0SMDJ18A 5.0SMDJ18CA 5PEV 5BEV 18.0 20.00 22.10 1 29.2 172.00 10 X

5.0SMDJ20A 5.0SMDJ20CA 5PEW 5BEW 20.0 22.20 24.50 1 32.4 155.00 5 X

5.0SMDJ22A 5.0SMDJ22CA 5PEX 5BEX 22.0 24.40 26.90 1 35.5 141.00 5 X

5.0SMDJ24A 5.0SMDJ24CA 5PEZ 5BEZ 24.0 26.70 29.50 1 38.9 129.00 5 X

5.0SMDJ26A 5.0SMDJ26CA 5PFE 5BFE 26.0 28.90 31.90 1 42.1 119.00 5 X

5.0SMDJ28A 5.0SMDJ28CA 5PFG 5BFG 28.0 31.10 34.40 1 45.4 110.00 5 X

5.0SMDJ30A 5.0SMDJ30CA 5PFK 5BFK 30.0 33.30 36.80 148.4 103.00 5 X

5.0SMDJ33A 5.0SMDJ33CA 5PFM 5BFM 33.0 36.70 40.60 1 53.3 93.90 5 X

5.0SMDJ36A 5.0SMDJ36CA 5PFP 5BFP 36.0 40.00 44.20 1 58.1 86.10 5 X

5.0SMDJ40A 5.0SMDJ40CA 5PFR 5BFR 40.0 44.40 49.10 1 64.5 77.60 5 X

5.0SMDJ43A 5.0SMDJ43CA 5PFT 5BFT 43.0 47.80 52.80 1 69.4 72.10 5 X

5.0SMDJ45A 5.0SMDJ45CA 5PFV 5BFV 45.0 50.00 55.30 1 72.7 68.80 5 X

5.0SMDJ48A 5.0SMDJ48CA 5PFX 5BFX 48.0 53.30 58.90 1 77.4 64.70 5 X

5.0SMDJ51A 5.0SMDJ51CA 5PFZ 5BFZ 51.0 56.70 62.70 1 82.4 60.70 5 X

5.0SMDJ54A 5.0SMDJ54CA 5PGE 5BGE 54.0 60.00 66.30 187.1 57.50 5 X

5.0SMDJ58A 5.0SMDJ58CA 5PGG 5BGG 58.0 64.40 71.20 1 93.6 53.50 5 X

5.0SMDJ60A 5.0SMDJ60CA 5PGK 5BGK 60.0 66.70 73.70 196.8 51.70 5 X

5.0SMDJ64A 5.0SMDJ64CA 5PGM 5BGM 64.0 71.10 78.60 1103.0 48.60 5 X

5.0SMDJ70A 5.0SMDJ70CA 5PGP 5BGB 70.0 77.80 86.00 1113.0 44.30 5 X

5.0SMDJ75A 5.0SMDJ75CA 5PGR 5BGR 75.0 83.30 92.10 1 121.0 41.40 5 X

5.0SMDJ78A 5.0SMDJ78CA 5PGT 5BGT 78.0 86.70 95.80 1 126.0 39.70 5 X

5.0SMDJ85A 5.0SMDJ85CA 5PGV 5BGV 85.0 94.40 104.00 1 137.0 36.50 5 X

5.0SMDJ90A 5.0SMDJ90CA 5PGX 5BGX 90.0 100.00 111. 0 0 1 146.0 34.30 5 X

5.0SMDJ100A 5.0SMDJ100CA 5PGZ 5BGZ 100.0 111.0 0 123.00 1 162.0 30.90 5 X

5.0SMDJ110A 5.0SMDJ110CA 5PHE 5BHE 110.0 122.00 135.00 1 177.0 28.30 5 X

5.0SMDJ120A 5.0SMDJ120CA 5PHG 5BHG 120.0 133.00 147.00 1 193.0 26.00 5 X

5.0SMDJ130A 5.0SMDJ130CA 5PHK 5BHK 130.0 144.00 159.00 1 209.0 24.00 5 X

5.0SMDJ150A 5.0SMDJ150CA 5PHM 5BHM 150.0 167.00 185.00 1243.0 20.60 5 X

5.0SMDJ160A 5.0SMDJ160CA 5PHP 5BHB 160.0 178.00 197.00 1 259.0 19.30 5 X

5.0SMDJ170A 5.0SMDJ170CA 5PHR 5BHR 170.0 189.00 209.00 1 275.0 18.20 5 X

For Bidirectional type having VR of 20 volts and less,the IR limit is double.

Revision: November 15, 2011, 16:49

Speciﬁcations are subject to change without notice.

Transient Voltage Suppression Diodes

Surface Mount – 5000W > 5.0SMDJ series

5.0SMDJ Series

Please refer to http://www.Littelfuse.com/series/5.0SSMDJ.html for current information.

0.1

100

1000

0.000001 0.00001 0.0001 0.001

td-Pulse Width (Sec.)

PPM

-Peak Pulse Power (KW)

0.0000001

0.31x0.31" (8.0x8.0mm)

Copper Pad Area

Ratings and Characteristic Curves (TA=25°C unless otherwise noted)

IPPM- Peak Pulse Current, % IRSM

100

150

1.0 2.0 3.0 4.0

tr=10µsec

Peak Value

IPPM

TJ=25°C

Pulse Width(td) is deﬁned

as the point where the peak

current decays to 50% of IPPM

10/1000µsec. Waveform

as deﬁned by R.E.A

t-Time (ms)

Half Value

IPPM ( )

100

0255075100 125 150 175

Peak Pulse Power (PPP) or

Current (IPP) Derating in

Percentage %

Tj-Initial temperature (ºC)

100

1000

10000

100000

1.010.0100.0 1000.0

Cj (pF)

VBR - Reverse Breakdown Voltage (V)

Bi-directional

@ VR

Uni-directional V

= OV

Bi-directional V

= OV

Uni-directional

@ VR

0.5

1.5

2.5

3.5

4.5

5.5

6.5

0255075100 125 150 175

PM(AV), Steady State Power Dissipation (W)

TA-Ambient Temperature (ºC)

Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Peak Pulse Power or Current Derating Curve

vs Initial Junction Temperature

Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance

Figure 5 - Steady State Power Derating Curve

110100

Number of Cycles at 60 Hz

100

150

200

250

300

350

IFSM - Peak Forward Surge Current (A)

Figure 6 - Maximum Non-Repetitive Peak Forward

Surge Current Uni-Directional Only

Revision: November 15, 2011, 16:49

Speciﬁcations are subject to change without notice.

Transient Voltage Suppression Diodes

Surface Mount – 5000W > 5.0SMDJ series

5.0SMDJ Series

Please refer to http://www.Littelfuse.com/series/5.0SSMDJ.html for current information.

Physical Speciﬁcations

Weight 0.007 ounce, 0.21 grams

Case JEDEC DO214AB. Molded plastic body

over glass passivated junction

Polarity Color band denotes positive end

(cathode) except Bidirectional.

Terminal Matte Tin-plated leads, Solderable per

JESD22-B102D

Dimensions

Dimensions Inches Millimeters

Min Max Min Max

A 0.114 0.126 2.900 3.200

B0.260 0.280 6.600 7. 11 0

C 0.220 0.245 5.590 6.220

D 0.079 0.103 2.060 2.620

E 0.030 0.060 0.760 1.520

F - 0.008 - 0.203

G 0.305 0.320 7.750 8.130

H0.006 0.012 0.152 0.305

I 0.129 - 3.300 -

J 0.094 -2.400 -

K - 0.165 -4.200

L0.094 -2.400 -

Environmental Speciﬁcations

Temperature Cycle JESD22-A104

Pressure Cooker JESD 22-A102

High Temp. Storage JESD22-A103

HTRB JESD22-A108

Thermal Shock JESD22-A106

Soldering Parameters

Temperature (T)

Time (t)

Ts(min)

Ts(max)

Preheat

Ramp-up Critical Zone

TL to TP

Ramp-down

t 25˚C to Peak

25˚C

Reﬂow Condition Lead–free assembly

Pre Heat

- Temperature Min (Ts(min))150°C

- Temperature Max (Ts(max))200°C

- Time (min to max) (ts)60 – 180 secs

Average ramp up rate (Liquidus Temp

(TL) to peak 3°C/second max

TS(max) to TL - Ramp-up Rate 3°C/second max

Reﬂow - Temperature (TL) (Liquidus) 217°C

- Time (min to max) (ts)60 – 150 seconds

Peak Temperature (TP)260+0/-5 °C

Time within 5°C of actual peak

Temperature (tp)20 – 40 seconds

Ramp-down Rate 6°C/second max

Time 25°C to peak Temperature (TP)8 minutes Max.

Do not exceed 280°C

DO-214AB (SMC J-Bend)

Dimensions in inches and (millimeters)

Cathode Band

(all dimensions in mm)

Solder Pads

Revision: November 15, 2011, 16:49

Speciﬁcations are subject to change without notice.

Transient Voltage Suppression Diodes

Surface Mount – 5000W > 5.0SMDJ series

5.0SMDJ Series

Please refer to http://www.Littelfuse.com/series/5.0SSMDJ.html for current information.

Part Numbering System

Packaging Options

Part Marking System

VOLTAGE

BI-DIRECTIONAL

5% VOLTAGE TOLERANCE

SERIES

5.0SMDJ XXX CA

XXXX

Marking Code

Littelfuse Logo

Cathode Band

XXXXX

Trace Code Marking

Tape and Reel Speciﬁcation

Part number Component

Package Quantity Packaging

Option

Packaging

Speciﬁcation

5.0SMDJxxxXX DO-214AB 3000 Tape & Reel – 16mm/13” tape EIA STD RS-481

5.0SMDJxxxXX-T7 DO-214AB 500 Tape & Reel – 16mm/7” tape EIA STD RS-481

0.63

(16.0)

0.315

(8.0)

0.157

(4.0)

0.65

(16.4)

0.80 (20.2)

Arbor Hole Dia.

Optional

7” 7.0 (187)

13” 13.0 (330) Dimensions are in inches

(and millimeters).

Direction of Feed

0.059 DIA

(1.5) Cover tape

Cathode