5KASMC10A thru 5KASMC43A www.vishay.com Vishay General Semiconductor Surface Mount PAR(R) Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES * Junction passivation optimized design passivated anisotropic rectifier technology * TJ = 185 C capability suitable for high reliability and automotive requirement * Available in uni-directional polarity only * 5000 W peak pulse power capability with a 10/1000 s waveform SMC (DO-214AB) * Excellent clamping capability * Very fast response time * Low incremental surge resistance PRIMARY CHARACTERISTICS VWM 10 V to 43 V VBR 11.1 V to 52.8 PPPM (10 x 1000 s) 5000 W PD 6.5 W TJ max. 185 C Polarity Uni-directional Package SMC (DO-214AB) TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C * AEC-Q101 qualified * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Case: SMC (DO-214AB) Molding compound meets UL 94 V-0 flammability rating Base P/NHM3_X - halogen-free, RoHS-compliant and AEC-Q101 qualified ("_X" denotes revision code e.g. A, B, .....) Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 HM3 suffix meets JESD 201 class 2 whisker test per Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL (1) VALUE UNIT Peak pulse power dissipation with a 10/1000 s waveform (fig. 3) PPPM 5000 W Peak power pulse current with a 10/1000 s waveform (fig. 1) IPPM (1) See next table A Power dissipation on infinite heatsink, TM = 50 C PD 6.5 W Operating junction and storage temperature range TJ, TSTG -65 to +185 C Note (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2 A Revision: 18-Jan-18 Document Number: 89432 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 5KASMC10A thru 5KASMC43A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE BREAKDOWN VOLTAGE VBR AT IT (1) (V) MIN. MAX. TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM IR (A) MAXIMUM REVERSE LEAKAGE AT VWM TJ = 150 C ID (A) MAXIMUM PEAK PULSE SURGE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) 5KASMC10A 5AX 11.1 12.3 1.0 10 20.0 500 294.1 17.0 5KASMC12A 5BE 13.3 14.7 1.0 12 10.0 300 251.3 19.9 5KASMC13A 5BG 14.4 15.9 1.0 13 10.0 300 232.6 21.5 5KASMC16A 5BP 17.8 19.7 1.0 16 2.0 50 192.3 26.0 5KASMC17A 5BR 18.9 20.9 1.0 17 2.0 50 181.2 27.6 5KASMC18A 5BT 20.0 22.1 1.0 18 2.0 50 171.2 29.2 5KASMC20A 5BV 22.2 24.5 1.0 20 2.0 50 154.3 32.4 5KASMC22A 5BX 24.4 26.9 1.0 22 2.0 50 140.8 35.5 5KASMC24A 5BZ 26.7 29.5 1.0 24 2.0 50 128.5 38.9 5KASMC26A 5CE 28.9 31.9 1.0 26 2.0 50 118.8 42.1 5KASMC28A 5CG 31.1 34.4 1.0 28 2.0 50 110.1 45.4 5KASMC30A 5CK 33.3 36.8 1.0 30 2.0 50 103.3 48.4 5KASMC33A 5CM 36.7 40.6 1.0 33 2.0 50 93.8 53.3 5KASMC36A 5CP 40.0 44.2 1.0 36 2.0 50 86.1 58.1 5KASMC40A 5CR 44.4 49.1 1.0 40 2.0 50 77.5 64.5 5KASMC43A 5CT 47.8 52.8 1.0 43 2.0 50 72.0 69.4 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derated per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Typical thermal resistance, junction to ambient RJA (1) 100 C/W Typical thermal resistance, junction to mount RJM (2) 20.8 C/W Notes (1) Mounted on minimum recommended pad layout (2) Mounted on infinite heat sink ORDERING INFORMATION (Example) PREFERRED P/N 5KASMC10AHM3_A/H (1) 5KASMC10AHM3_A/I (1) UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.257 H 850 7" diameter plastic tape and reel 0.257 I 3500 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified Revision: 18-Jan-18 Document Number: 89432 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 5KASMC10A thru 5KASMC43A www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 1 000 000 CJ - Junction Capacitance (pF) PPPM - Peak Pulse Power (kW) 100 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 100 000 10 Measured at Zero Bias 10 000 1000 1 100 1 10 100 10 1000 20 30 40 Reverse Voltage (V) Fig. 1 - Peak Pulse Power Rating Curve Fig. 4 - Typical Junction Capacitance 100 6.5 6.0 75 50 25 5.5 5.0 TM, Mounted on Infinite Heatsink 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 TA, Mounted on Minimum Recommended Pad Layout 0.5 0 0 50 0 100 150 0 200 25 50 75 100 125 150 TJ - Initial Temperature (C) Temperature (C) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Fig. 5 - Power Derating Curve 150 Peak Value IPPM 100 Half Value - IPP IPPM 2 50 td = 1000 s td = 20 s td 0 0 1.0 2.0 3.0 175 200 100 TJ = 25 C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 s tr = 8 s Transient Thermal Impedance (C/W) IPPM - Peak Pulse Current (% IRSM) 50 td - Pulse Width (s) PD - Power Dissipation (W) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage (%) Measured at Stand-Off Voltage VWM 4.0 10 1 0.01 0.1 1 10 100 1000 t - Time (ms) tp - Pulse Duration (s) Fig. 3 - Pulse Waveform Fig. 6 - Typical Transient Thermal Impedance Revision: 18-Jan-18 Document Number: 89432 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 5KASMC10A thru 5KASMC43A www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMC (DO-214AB) Mounting Pad Layout Cathode Band 0.185 (4.69) MAX. 0.126 (3.20) 0.246 (6.22) 0.220 (5.59) 0.114 (2.90) 0.126 (3.20) MIN. 0.280 (7.11) 0.060 (1.52) MIN. 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) 0.320 REF. 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.320 (8.13) 0.305 (7.75) Revision: 18-Jan-18 Document Number: 89432 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: 5KASMC40AHM3/57 5KASMC17AHM3/57 5KASMC30AHM3/57 5KASMC12AHM3/57 5KASMC16AHM3/57 5KASMC36AHM3/57 5KASMC26AHM3/57 5KASMC33AHM3/57 5KASMC20AHM3/57 5KASMC10AHM3/57 5KASMC18AHM3/57 5KASMC13AHM3/57 5KASMC24AHM3/57 5KASMC22AHM3/57 5KASMC43AHM3/57 5KASMC28AHM3/57 5KASMC43AHM3/9A 5KASMC16AHM3/9A 5KASMC17AHM3/9A 5KASMC18AHM3/9A 5KASMC22AHM3/9A 5KASMC12AHM3/9A 5KASMC30AHM3/9A 5KASMC10AHM3/9A 5KASMC24AHM3/9A 5KASMC40AHM3/9A 5KASMC13AHM3/9A 5KASMC26AHM3/9A 5KASMC33AHM3/9A 5KASMC28AHM3/9A 5KASMC20AHM3/9A 5KASMC36AHM3/9A 5KASMC30AHM3_A/I 5KASMC22AHM3_A/I 5KASMC36AHM3_A/I 5KASMC17AHM3_A/I 5KASMC30AHM3_A/H 5KASMC16AHM3_A/I 5KASMC16AHM3_A/H 5KASMC20AHM3_A/I 5KASMC10AHM3_A/I 5KASMC18AHM3_A/I 5KASMC33AHM3_A/H 5KASMC24AHM3_A/H 5KASMC17AHM3_A/H 5KASMC10AHM3_A/H 5KASMC13AHM3_A/H 5KASMC13AHM3_A/I 5KASMC20AHM3_A/H 5KASMC12AHM3_A/I 5KASMC28AHM3_A/I 5KASMC22AHM3_A/H 5KASMC26AHM3_A/I 5KASMC28AHM3_A/H 5KASMC43AHM3_A/I 5KASMC18AHM3_A/H 5KASMC12AHM3_A/H 5KASMC43AHM3_A/H 5KASMC26AHM3_A/H 5KASMC40AHM3_A/H 5KASMC36AHM3_A/H 5KASMC24AHM3_A/I 5KASMC40AHM3_A/I 5KASMC33AHM3_A/I