LM4040 Precision Micropower Shunt Voltage Reference General Description Ideal for space critical applications, the LM4040 precision voltage reference is available in the sub-miniature SC70 and SOT-23 surface-mount package. The LM4040's advanced design eliminates the need for an external stabilizing capacitor while ensuring stability with any capacitive load, thus making the LM4040 easy to use. Further reducing design effort is the availability of several fixed reverse breakdown voltages: 2.048V, 2.500V, 3.000V, 4.096V, 5.000V, 8.192V, and 10.000V. The minimum operating current increases from 60 A for the LM4040-2.5 to 100 A for the LM4040-10.0. All versions have a maximum operating current of 15 mA. The LM4040 utilizes fuse and zener-zap reverse breakdown voltage trim during wafer sort to ensure that the prime parts have an accuracy of better than 0.1% (A grade) at 25C. Bandgap reference temperature drift curvature correction and low dynamic impedance ensure stable reverse breakdown voltage accuracy over a wide range of operating temperatures and currents. Also available is the LM4041 with two reverse breakdown voltage versions: adjustable and 1.2V. Please see the LM4041 data sheet. Features n Small packages: SOT-23, TO-92 and SC70 n No output capacitor required n Tolerates capacitive loads n Fixed reverse breakdown voltages of 2.048V, 2.500V,3.000V, 4.096V, 5.000V, 8.192V, and 10.000V Key Specifications (LM4040-2.5) j Output voltage tolerance 0.1% (max) (A grade, 25C) j Low output noise 35 Vrms(typ) (10 Hz to 10 kHz) j Wide operating current range 60 A to 15 mA j Industrial temperature range -40C to +85C j Extended temperature range -40C to +125C j Low temperature coefficient 100 ppm/C (max) Applications n n n n n n n n Portable, Battery-Powered Equipment Data Acquisition Systems Instrumentation Process Control Energy Management Product Testing Automotive Precision Audio Components Connection Diagrams SOT-23 TO-92 SC70 01132301 *This pin must be left floating or connected to pin 2. Top View See NS Package Number MF03A (JEDEC Registration TO-236AB) (c) 2002 National Semiconductor Corporation 01132303 Bottom View See NS Package Number Z03A DS011323 01132330 *This pin must be left floating or connected to pin 1. Top View See NS Package Number MAA05A www.national.com LM4040 Precision Micropower Shunt Voltage Reference August 2002 LM4040 Ordering Information Industrial Temperature Range (-40C to +85C) Reverse Breakdown Voltage Tolerance at 25C and Average Reverse Breakdown Voltage Temperature Coefficient Package M3 (SOT-23) M7 (SC70) NS Package Number Supplied as 1000 Units Tape and Reel Supplied as 3000 Units tape and Reel 0.1%, 100 ppm/C max (A grade) LM4040AIM3-2.0 LM4040AIM3-2.5 LM4040AIM3-3.0 LM4040AIM3-4.1 LM4040AIM3-5.0 LM4040AIM3-8.2 LM4040AIM3-10.0 LM4040AIM3X-2.0 LM4040AIM3X-2.5 LM4040AIM3X-3.0 LM4040AIM3X-4.1 LM4040AIM3X-5.0 LM4040AIM3X-8.2 LM4040AIM3X-10.0 0.2%, 100 ppm/C max (B grade) LM4040BIM3-2.0 LM4040BIM3-2.5 LM4040BIM3-3.0 LM4040BIM3-4.1 LM4040BIM3-5.0 LM4040BIM3-8.2 LM4040BIM3-10.0 LM4040BIM3X-2.0 LM4040BIM3X-2.5 LM4040BIM3X-3.0 LM4040BIM3X-4.1 LM4040BIM3X-5.0 LM4040BIM3X-8.2 LM4040BIM3X-10.0 LM4040BIM7-2.0 LM4040BIM7-2.5 LM4040BIM7-3.0 LM4040BIM7-4.1 LM4040BIM7-5.0 LM4040BIM7X-2.0 LM4040BIM7X-2.5 LM4040BIM7X-3.0 LM4040BIM7X-4.1 LM4040BIM7X-5.0 LM4040BIZ-2.0 MF03A, LM4040BIZ-2.5 Z03A, LM4040BIZ-3.0 MAA05A LM4040BIZ-4.1 LM4040BIZ-5.0 LM4040BIZ-8.2 LM4040BIZ-10.0 0.5%, 100 ppm/C max (C grade) LM4040CIM3-2.0 LM4040CIM3-2.5 LM4040CIM3-3.0 LM4040CIM3-4.1 LM4040CIM3-5.0 LM4040CIM3-8.2 LM4040CIM3-10.0 LM4040CIM3X-2.0 LM4040CIM3X-2.5 LM4040CIM3X-3.0 LM4040CIM3X-4.1 LM4040CIM3X-5.0 LM4040CIM3X-8.2 LM4040CIM3X-10.0 LM4040CIM7-2.0 LM4040CIM7-2.5 LM4040CIM7-3.0 LM4040CIM7-4.1 LM4040CIM7-5.0 LM4040CIM7X-2.0 LM4040CIM7X-2.5 LM4040CIM7X-3.0 LM4040CIM7X-4.1 LM4040CIM7X-5.0 LM4040CIZ-2.0 MF03A, LM4040CIZ-2.5 Z03A, LM4040CIZ-3.0 MAA05A LM4040CIZ-4.1 LM4040CIZ-5.0 LM4040CIZ-8.2 LM4040CIZ-10.0 1.0%, 150 ppm/C max (D grade) LM4040DIM3-2.0 LM4040DIM3-2.5 LM4040DIM3-3.0 LM4040DIM3-4.1 LM4040DIM3-5.0 LM4040DIM3-8.2 LM4040DIM3-10.0 LM4040DIM3X-2.0 LM4040DIM3X-2.5 LM4040DIM3X-3.0 LM4040DIM3X-4.1 LM4040DIM3X-5.0 LM4040DIM3X-8.2 LM4040DIM3X-10.0 LM4040DIM7-2.0 LM4040DIM7-2.5 LM4040DIM7-3.0 LM4040DIM7-4.1 LM4040DIM7-5.0 LM4040DIM7X-2.0 LM4040DIM7X-2.5 LM4040DIM7X-3.0 LM4040DIM7X-4.1 LM4040DIM7X-5.0 LM4040DIZ-2.0 MF03A, LM4040DIZ-2.5 Z03A, LM4040DIZ-3.0 MAA05A LM4040DIZ-4.1 LM4040DIZ-5.0 LM4040DIZ-8.2 LM4040DIZ-10.0 2.0%, 150 ppm/C max (E grade) LM4040EIM3-2.0 LM4040EIM3-2.5 LM4040EIM3-3.0 LM4040EIM3X-2.0 LM4040EIM7-2.0 LM4040EIM3X-2.5 LM4040EIM7-2.5 LM4040EIM3X-3.0 LM4040EIM7-3.0 www.national.com Supplied as 1000 Units Tape and Reel Supplied as 3000 Units Tape and Reel Z (TO-92) LM4040AIZ-2.0 LM4040AIZ-2.5 LM4040AIZ-3.0 LM4040AIZ-4.1 LM4040AIZ-5.0 LM4040AIZ-8.2 LM4040AIZ-10.0 2 LM4040EIM7X-2.0 LM4040EIZ-2.0 LM4040EIM7X-2.5 LM4040EIZ-2.5 LM4040EIM7X-3.0 LM4040EIZ-3.0 MF03A, Z03A MF03A, Z03A, MAA05A LM4040 Extended Temperature Range (-40 C to +125C) Reverse Breakdown Voltage Tolerance at 25 C and Average Reverse Breakdown Voltage Temperature Coefficient Package M3 (SOT-23) See NS Package Number MF03A 0.5%, 100 ppm/C max (C grade) LM4040CEM3-2.0, LM4040CEM3-2.5, LM4040CEM3-3.0, LM4040CEM3-5.0 1.0%, 150 ppm/C max (D grade) LM4040DEM3-2.0, LM4040DEM3-2.5, LM4040DEM3-3.0, LM4040DEM3-5.0 2.0%, 150 ppm/C max (E grade) LM4040EEM3-2.0, LM4040EEM3-2.5, LM4040EEM3-3.0 3 www.national.com LM4040 SOT-23 AND SC70 Package Marking Information Only three fields of marking are possible on the SOT-23's and SC70's small surface. This table gives the meaning of the three fields. Part Marking RJA SOT-23 only Field Definition First Field: R2A SOT-23 only RKA SOT-23 only R4A SOT-23 only R5A SOT-23 only R = Reference Second Field: J = 2.048V Voltage Option 2 = 2.500V Voltage Option R8A SOT-23 only K = 3.000V Voltage Option R0A SOT-23 only 4 = 4.096V Voltage Option RJB R2B 5 = 5.000V Voltage Option RKB R4B 8= 8.192V Voltage Option R5B 0 = 10.000V Voltage Option R8B SOT-23 only R0B SOT-23 only Third Field: RJC R2C A-E = Initial Reverse Breakdown Voltage or Reference Voltage Tolerance RKC R4C A = 0.1%, B = 0.2%, C = +0.5%, D = 1.0%, E = 2.0% R5C R8C SOT-23 only R0C SOT-23 only RJD R2D RKD R4D R5D R8D SOT-23 only R0D SOT-23 only RJE R2E RKE www.national.com 4 Machine Model (Note 3) (Note 1) See AN-450 "Surface Mounting Methods and Their Effect on Product Reliability" for other methods of soldering surface mount devices. If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Reverse Current 20 mA Forward Current 10 mA Operating Ratings(Notes 1, 2) Power Dissipation (TA = 25C) (Note 2) M3 Package 306 mW Z Package 550 mW M7 Package 241 mW Storage Temperature -65C to +150C Infrared (15 seconds) +220C Z Package Soldering (10 seconds) +260C ESD Susceptibility Human Body Model (Note 3) Industrial Temperature Range -40C TA +85C Extended Temperature Range -40C TA +125C Reverse Current M3 Package +215C (Tmin TA Tmax) Temperature Range Lead Temperature Vapor phase (60 seconds) 200V 2 kV LM4040-2.0 60 A to 15 mA LM4040-2.5 60 A to 15 mA LM4040-3.0 62 A to 15 mA LM4040-4.1 68 A to 15 mA LM4040-5.0 74 A to 15 mA LM4040-8.2 91 A to 15 mA LM4040-10.0 100 A to 15 mA LM4040-2.0 Electrical Characteristics (Industrial Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. Symbol VR Parameter Typical (Note 4) Conditions Reverse Breakdown Voltage IR = 100 A VR/T LM4040BIM3 LM4040BIZ LM4040BIM7 (Limit) (Note 5) 2.048 Reverse Breakdown Voltage IR = 100 A Tolerance (Note 6) IRMIN LM4040AIM3 LM4040AIZ (Limit) (Note 5) Minimum Operating Current V 2.0 4.1 mV (max) 15 17 mV (max) 60 60 A (max) 65 65 A (max) 45 A 20 Average Reverse Breakdown IR = 10 mA Voltage Temperature IR = 1 mA Coefficient IR = 100 A (Note 6) 15 VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA Change with Operating Current Change (Note *NO TARGET FOR FNXref NS4914*) 1 mA IR 15 mA Units (Limit) ppm/C 100 100 ppm/C (max) 15 ppm/C 0.3 mV 0.8 0.8 mV (max) 1.0 1.0 mV (max) 2.5 ZR Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.3 eN Wideband Noise IR = 100 A 35 mV 6.0 6.0 mV (max) 8.0 8.0 mV (max) 0.8 0.8 (max) Vrms 10 Hz f 10 kHz 5 www.national.com LM4040 Absolute Maximum Ratings LM4040 LM4040-2.0 Electrical Characteristics (Industrial Temperature Range) (Continued) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. Symbol VR VHYST Parameter Typical (Note 4) Conditions Reverse Breakdown Voltage t = 1000 hrs Long Term Stability T = 25C 0.1C IR = 100 A Thermal Hysteresis (Note 8) T = -40C to +125C LM4040AIM3 LM4040AIZ (Limit) (Note 5) LM4040BIM3 LM4040BIZ LM4040BIM7 (Limit) (Note 5) Units (Limit) 120 ppm 0.08 % LM4040-2.0 Electrical Characteristics (Industrial Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively. Symbol VR Parameter Conditions Reverse Breakdown IR = 100 A Voltage Typical (Note 4) 2.048 Reverse Breakdown IR = 100 A Voltage Tolerance (Note 6) IRMIN VR/T Minimum Operating Current LM4040CIM3 LM4040DIM3 LM4040EIM7 LM4040CIZ LM4040DIZ LM4040EIZ LM4040CIM7 LM4040DIM7 (Limit) (Limit) (Limit) (Note 5) (Note 5) (Note 5) Units (Limit) V 10 20 41 mV (max) 23 40 60 mV (max) 45 A 60 65 65 A (max) 65 70 70 A (max) IR = 10 mA 20 IR = 1 mA 15 IR = 100 A 15 ppm/C Reverse Breakdown IRMIN IR 1 mA Voltage Change with Operating Current Change 1 mA IR 15 mA (Note *NO TARGET FOR FNXref NS4914*) 0.3 mV Reverse Dynamic Impedance 0.3 IAC = 0.1 IR eN Wideband Noise IR = 100 A VR Reverse Breakdown t = 1000 hrs Voltage Long Term T = 25C 0.1C Stability IR = 100 A VR/IR ZR Average Reverse Breakdown Voltage Temperature Coefficient (Note 6) IR = 1 mA, f = 120 Hz ppm/C 100 150 150 ppm/C (max) 0.8 1.0 1.0 mV (max) 1.0 1.2 1.2 mV (max) 2.5 mV 6.0 8.0 8.0 mV (max) 8.0 10.0 10.0 mV (max) 0.9 1.1 1.1 (max) 35 Vrms 120 ppm 0.08 % 10 Hz f 10 kHz VHYST Thermal Hysteresis (Note 8) www.national.com T = -40C to +125C 6 LM4040 LM4040-2.0 Electrical Characteristics (Extended Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively. Symbol VR Parameter Conditions Typical (Note 4) Reverse Breakdown IR = 100 A Voltage LM4040CEM3 LM4040DEM3 LM4040EEM3 (Limit) (Limit) (Limit) (Note 5) (Note 5) (Note 5) 2.048 V Reverse Breakdown IR = 100 A Voltage Tolerance (Note 6) IRMIN VR/T Minimum Operating Current Average Reverse Breakdown Voltage Temperature Coefficient (Note 6) 20 41 mV (max) 30 50 70 mV (max) 60 65 65 A (max) 68 73 73 A (max) A IR = 10 mA 20 IR = 1 mA 15 IR = 100 A 15 ppm/C 0.3 mV 1 mA IR 15 mA eN 10 45 VR/IR Reverse Breakdown IRMIN IR 1 mA Voltage Change with Operating Current Change (Note 7) ZR Units (Limit) ppm/C 100 150 150 ppm/C (max) 0.8 1.0 1.0 mV (max) 1.0 1.2 1.2 mV (max) 6.0 8.0 8.0 mV (max) 8.0 10.0 10.0 mV (max) 0.9 1.1 1.1 (max) 2.5 mV Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.3 Wideband Noise IR = 100 A 35 Vrms 120 ppm 0.08 % 10 Hz f 10 kHz VR VHYST Reverse Breakdown t = 1000 hrs Voltage Long Term T = 25C 0.1C IR = 100 A Stability Thermal Hysteresis (Note 8) T = -40C to +125C LM4040-2.5 Electrical Characteristics (Industrial Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. Symbol VR Parameter Typical (Note 4) Conditions Reverse Breakdown Voltage IR = 100 A LM4040BIM3 LM4040BIZ LM4040BIM7 Limits (Note 5) 2.5 19 5.0 21 mV (max) 60 60 A (max) 65 65 A (max) 2.500 Reverse Breakdown Voltage IR = 100 A Tolerance (Note 6) IRMIN LM4040AIM3 LM4040AIZ (Limit) (Note 5) Minimum Operating Current V 45 7 Units (Limit) mV (max) A www.national.com LM4040 LM4040-2.5 Electrical Characteristics (Industrial Temperature Range) (Continued) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. Symbol VR/T Parameter Conditions Average Reverse Breakdown IR = 10 mA Voltage Temperature IR = 1 mA Coefficient (Note 6) IR = 100 A VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA Change with Operating Current Change (Note 7) LM4040BIM3 LM4040BIZ LM4040BIM7 Limits (Note 5) Units (Limit) 20 15 15 100 100 ppm/C (max) ppm/C ppm/C 0.3 1 mA IR 15 mA ZR Typical (Note 4) LM4040AIM3 LM4040AIZ (Limit) (Note 5) mV 0.8 0.8 mV (max) 1.0 1.0 mV (max) 6.0 6.0 mV (max) 8.0 8.0 mV (max) 0.8 0.8 (max) 2.5 mV Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.3 eN Wideband Noise IR = 100 A 35 Vrms VR Reverse Breakdown Voltage t = 1000 hrs Long Term Stability T = 25C 0.1C IR = 100 A 120 ppm 0.08 % 10 Hz f 10 kHz VHYST Thermal Hysteresis (Note 8) T = -40C to +125C LM4040-2.5 Electrical Characteristics (Industrial Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively. Symbol VR Parameter Conditions Reverse Breakdown IR = 100 A Voltage Typical (Note 4) 2.500 Reverse Breakdown IR = 100 A Voltage Tolerance (Note 6) IRMIN VR/T Minimum Operating Current Average Reverse Breakdown Voltage Temperature Coefficient(Note 6) www.national.com LM4040CIM3 LM4040DIM3 LM4040EIM7 LM4040DIZ LM4040DIZ LM4040EIZ LM4040CIM7 LM4040DIM7 Limits Limits Limits (Note 5) (Note 5) (Note 5) Units (Limit) V 12 25 50 mV (max) 29 49 74 mV (max) 60 65 65 A (max) 65 70 70 A (max) 45 A IR = 10 mA 20 IR = 1 mA 15 IR = 100 A 15 8 ppm/C 100 150 150 ppm/C (max) ppm/C (Continued) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively. Symbol Parameter Conditions Typical (Note 4) Reverse Breakdown IRMIN IR 1 mA Voltage Change with Operating Current Change 1 mA IR 15 mA (Note 7) 0.3 Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz 0.3 eN Wideband Noise IR = 100 A VR Reverse Breakdown t = 1000 hrs Voltage Long Term T = 25C 0.1C Stability IR = 100 A VR/IR ZR LM4040CIM3 LM4040DIM3 LM4040EIM7 LM4040DIZ LM4040DIZ LM4040EIZ LM4040CIM7 LM4040DIM7 Limits Limits Limits (Note 5) (Note 5) (Note 5) Units (Limit) mV 0.8 1.0 1.0 mV (max) 1.0 1.2 1.2 mV (max) 6.0 8.0 8.0 mV (max) 8.0 10.0 10.0 mV (max) 0.9 1.1 1.1 (max) 2.5 mV IAC = 0.1 IR 35 Vrms 120 ppm 0.08 % 10 Hz f 10 kHz VHYST Thermal Hysteresis (Note 8) T = -40C to +125C LM4040-2.5 Electrical Characteristics (Extended Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively. Symbol VR Parameter Conditions Reverse Breakdown IR = 100 A Voltage Typical (Note 4) 2.500 Reverse Breakdown IR = 100 A Voltage Tolerance(Note 6) IRMIN VR/T Minimum Operating Current Average Reverse Breakdown Voltage Temperature Coefficient (Note 6) LM4040CEM3 LM4040DEM3 LM4040EEM3 Limits Limits Limits (Note 5) (Note 5) (Note 5) Units (Limit) V 12 25 50 mV (max) 38 63 88 mV (max) 60 65 65 A (max) 68 73 73 A (max) 45 A IR = 10 mA 20 IR = 1 mA 15 IR = 100 A 15 ppm/C 0.3 mV VR/IR Reverse Breakdown IRMIN IR 1 mA Voltage Change with Operating Current Change (Note 7) 1 mA IR 15 mA ppm/C 100 150 150 ppm/C (max) 0.8 1.0 1.0 mV (max) 1.0 1.2 1.2 mV (max) 6.0 8.0 8.0 mV (max) 8.0 10.0 10.0 mV (max) 2.5 mV 9 www.national.com LM4040 LM4040-2.5 Electrical Characteristics (Industrial Temperature Range) LM4040 LM4040-2.5 Electrical Characteristics (Extended Temperature Range) (Continued) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively. Symbol ZR eN Parameter Conditions Typical (Note 4) LM4040CEM3 LM4040DEM3 LM4040EEM3 Limits Limits Limits (Note 5) (Note 5) (Note 5) Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.3 Wideband Noise IR = 100 A 35 Vrms 120 ppm 0.08 % Units (Limit) 0.9 1.1 1.1 (max) 10 Hz f 10 kHz VR VHYST Reverse Breakdown t = 1000 hrs Voltage Long Term T = 25C 0.1C IR = 100 A Stability Thermal Hysteresis (Note 8) T = -40C to +125C LM4040-3.0 Electrical Characteristics (Industrial Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. Symbol VR Parameter Typical (Note 4) Conditions Reverse Breakdown Voltage IR = 100 A VR/T LM4040BIM3 LM4040BIZ LM4040BIM7 Limits (Note 5) 3.0 22 6.0 26 mV (max) 62 62 A (max) 67 67 A (max) 100 100 ppm/C (max) 3.000 Reverse Breakdown Voltage IR = 100 A Tolerance (Note 6) IRMIN LM4040AIM3 LM4040AIZ (Limit) (Note 5) Minimum Operating Current V 47 20 15 15 Average Reverse Breakdown IR = 10 mA Voltage Temperature IR = 1 mA Coefficient (Note 6) IR = 100 A VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA Change with Operating Current Change (Note 7) mV (max) A ppm/C ppm/C 0.6 1 mA IR 15 mA Units (Limit) mV 0.8 0.8 mV (max) 1.1 1.1 mV (max) 2.7 mV 6.0 6.0 mV (max) 9.0 9.0 mV (max) ZR Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.4 eN Wideband Noise IR = 100 A 35 Vrms 120 ppm 0.08 % 0.9 0.9 (max) 10 Hz f 10 kHz VR VHYST Reverse Breakdown Voltage t = 1000 hrs Long Term Stability T = 25C 0.1C IR = 100 A Thermal Hysteresis (Note 8) www.national.com T = -40C to +125C 10 LM4040 LM4040-3.0 Electrical Characteristics (Industrial Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively. Symbol Parameter Conditions Reverse Breakdown IR = 100 A Voltage VR Typical (Note 4) 3.000 Reverse Breakdown IR = 100 A Voltage Tolerance (Note 6) IRMIN VR/T VR/IR ZR Minimum Operating Current Average Reverse Breakdown Voltage Temperature Coefficient(Note 6) LM4040CIM3 LM4040DIM3 LM4040EIM7 LM4040DIZ LM4040DIZ LM4040EIZ LM4040CIM7 LM4040DIM7 Limits Limits Limits (Note 5) (Note 5) (Note 5) V 15 30 60 mV (max) 34 59 89 mV (max) 60 65 65 A (max) 65 70 70 A (max) 45 A IR = 10 mA 20 IR = 1 mA 15 IR = 100 A 15 Reverse Breakdown IRMIN IR 1 mA Voltage Change with Operating Current Change 1 mA IR 15 mA (Note 7) Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz eN Wideband Noise IR = 100 A VR Reverse Breakdown t = 1000 hrs Voltage Long Term T = 25C 0.1C Stability IR = 100 A Units (Limit) ppm/C 100 150 150 ppm/C (max) ppm/C 0.4 mV 0.8 1.1 1.1 mV (max) 1.1 1.3 1.3 mV (max) 6.0 8.0 8.0 mV (max) 9.0 11.0 11.0 mV (max) 0.9 1.2 1.2 (max) 2.7 mV 0.4 IAC = 0.1 IR 35 Vrms 120 ppm 0.08 % 10 Hz f 10 kHz VHYST Thermal Hysteresis (Note 8) T = -40C to +125C LM4040-3.0 Electrical Characteristics (Extended Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively. Symbol VR Parameter Conditions Reverse Breakdown IR = 100 A Voltage Typical (Note 4) 3.000 Reverse Breakdown IR = 100 A Voltage Tolerance(Note 6) IRMIN Minimum Operating Current LM4040CEM3 LM4040DEM3 LM4040EEM3 Limits Limits Limits (Note 5) (Note 5) (Note 5) V 15 30 60 mV (max) 45 75 105 mV (max) 62 67 67 A (max) 70 75 75 A (max) 47 11 Units (Limit) A www.national.com LM4040 LM4040-3.0 Electrical Characteristics (Extended Temperature Range) (Continued) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of 0.5%, 1.0% and 2.0%, respectively. Symbol VR/T Parameter Average Reverse Breakdown Voltage Temperature Coefficient (Note 6) Conditions Typical (Note 4) 20 IR = 1 mA 15 IR = 100 A 15 ppm/C 0.4 mV 1 mA IR 15 mA eN Units (Limit) IR = 10 mA VR/IR Reverse Breakdown IRMIN IR 1 mA Voltage Change with Operating Current Change (Note 7) ZR LM4040CEM3 LM4040DEM3 LM4040EEM3 Limits Limits Limits (Note 5) (Note 5) (Note 5) ppm/C 100 150 150 ppm/C (max) 0.8 1.1 1.1 mV (max) 1.1 1.3 1.3 mV (max) 6.0 8.0 8.0 mV (max) 9.0 11.0 11.0 mV (max) 0.9 1.2 1.2 (max) 2.7 mV Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.4 Wideband Noise IR = 100 A 35 Vrms 120 ppm 0.08 % 10 Hz f 10 kHz VR VHYST Reverse Breakdown t = 1000 hrs Voltage Long Term T = 25C 0.1C IR = 100 A Stability Thermal Hysteresis (Note 8) T = -40C to +125C LM4040-4.1 Electrical Characteristics (Industrial Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. Symbol VR Parameter Conditions Typical (Note 4) Reverse Breakdown Voltage IR = 100 A VR/T Minimum Operating Current 4.1 31 8.2 35 mV (max) 68 68 A (max) 30 20 20 73 73 A (max) 100 100 ppm/C (max) VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA Change with Operating Current Change (Note 7) ppm/C ppm/C mV 0.9 0.9 mV (max) 1.2 1.2 mV (max) 7.0 7.0 mV (max) 10.0 10.0 mV (max) 3.0 12 mV (max) A 0.5 1 mA IR 15 mA Units (Limit) V 50 Average Reverse Breakdown IR = 10 mA Voltage Temperature IR = 1 mA Coefficient(Note 6) IR = 100 A www.national.com LM4040BIM3 LM4040BIZ LM4040BIM7 Limits (Note 5) 4.096 Reverse Breakdown Voltage IR = 100 A Tolerance (Note 6) IRMIN LM4040AIM3 LM4040AIZ Limits (Note 5) mV (Continued) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. Symbol ZR eN Parameter Conditions Reverse Dynamic Impedance IAC = 0.1 IR Wideband Noise IR = 100 A Typical (Note 4) IR = 1 mA, f = 120 Hz, LM4040AIM3 LM4040AIZ Limits (Note 5) LM4040BIM3 LM4040BIZ LM4040BIM7 Limits (Note 5) Units (Limit) 1.0 1.0 (max) 0.5 80 Vrms 120 ppm 0.08 % 10 Hz f 10 kHz VR Reverse Breakdown Voltage t = 1000 hrs Long Term Stability T = 25C 0.1C IR = 100 A VHYST Thermal Hysteresis (Note 8) T = -40C to +125C 13 www.national.com LM4040 LM4040-4.1 Electrical Characteristics (Industrial Temperature Range) LM4040 LM4040-4.1 Electrical Characteristics (Industrial Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of 0.5% and 1.0%, respectively. Symbol VR Parameter Conditions Typical (Note 4) Reverse Breakdown Voltage IR = 100 A Minimum Operating Current 30 20 20 VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA Change with Operating Current Change (Note 7) 0.5 1 mA IR 15 mA eN Units (Limit) 20 47 41 81 mV (max) 68 73 A (max) 73 78 A (max) 100 150 ppm/C (max) V 50 VR/T Average Reverse Breakdown IR = 10 mA Voltage Temperature IR = 1 mA Coefficient (Note 6) IR = 100 A ZR LM4040DIM3 LM4040BIZ LM4040DIM7 Limits (Note 5) 4.096 Reverse Breakdown Voltage IR = 100 A Tolerance (Note 6) IRMIN LM4040CIM3 LM4040CIZ LM4040CIM7 Limits (Note 5) Reverse Dynamic Impedance IAC = 0.1 IR Wideband Noise IR = 100 A A ppm/C ppm/C mV 0.9 1.2 mV (max) 1.2 1.5 mV (max) 7.0 9.0 mV (max) 10.0 13.0 mV (max) 1.0 1.3 (max) 3.0 IR = 1 mA, f = 120 Hz, mV (max) mV 0.5 80 Vrms 120 ppm 0.08 % 10 Hz f 10 kHz VR Reverse Breakdown Voltage t = 1000 hrs Long Term Stability T = 25C 0.1C IR = 100 A VHYST Thermal Hysteresis (Note 8) www.national.com T = -40C to +125C 14 LM4040 LM4040-5.0 Electrical Characteristics (Industrial Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. Symbol VR Parameter Conditions Typical (Note 4) Reverse Breakdown Voltage IR = 100 A Minimum Operating Current 30 20 20 VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA Change with Operating Current Change (Note 7) 0.5 1 mA IR 15 mA eN Units (Limit) 5.0 38 10 43 mV (max) 74 74 A (max) 80 80 A (max) 100 100 ppm/C (max) V 54 VR/T Average Reverse Breakdown IR = 10 mA Voltage Temperature IR = 1 mA Coefficient (Note 6) IR = 100 A ZR LM4040BIM3 LM4040BIZ LM4040BIM7 Limits (Note 5) 5.000 Reverse Breakdown Voltage IR = 100 A Tolerance (Note 6) IRMIN LM4040AIM3 LM4040AIZ Limits (Note 5) Reverse Dynamic Impedance IAC = 0.1 IR Wideband Noise IR = 100 A A ppm/C ppm/C mV 1.0 1.0 mV (max) 1.4 1.4 mV (max) 8.0 8.0 mV (max) 12.0 12.0 mV (max) 1.1 1.1 (max) 3.5 IR = 1 mA, f = 120 Hz, mV (max) mV 0.5 80 Vrms 120 ppm 0.08 % 10 Hz f 10 kHz VR Reverse Breakdown Voltage t = 1000 hrs Long Term Stability T = 25C 0.1C IR = 100 A VHYST Thermal Hysteresis (Note 8) T = -40C to +125C 15 www.national.com LM4040 LM4040-5.0 Electrical Characteristics (Industrial Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of 0.5% and 1.0%, respectively. Symbol VR Parameter Conditions Typical (Note 4) Reverse Breakdown Voltage IR = 100 A Minimum Operating Current 30 20 20 VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA Change with Operating Current Change (Note 7) 0.5 1 mA IR 15 mA eN Units (Limit) 25 58 50 99 mV (max) 74 79 A (max) 80 85 A (max) 100 150 ppm/C (max) V 54 VR/T Average Reverse Breakdown IR = 10 mA Voltage Temperature IR = 1 mA Coefficient (Note 6) IR = 100 A ZR LM4040DIM3 LM4040BIZ LM4040DIM7 Limits (Note 5) 5.000 Reverse Breakdown Voltage IR = 100 A Tolerance (Note 6) IRMIN LM4040CIM3 LM4040CIZ LM4040CIM7 Limits (Note 5) Reverse Dynamic Impedance IAC = 0.1 IR Wideband Noise IR = 100 A A ppm/C ppm/C mV 1.0 1.3 mV (max) 1.4 1.8 mV (max) 8.0 10.0 mV (max) 12.0 15.0 mV (max) 1.1 1.5 (max) 3.5 IR = 1 mA, f = 120 Hz, mV (max) mV 0.5 80 Vrms 120 ppm 0.08 % 10 Hz f 10 kHz VR Reverse Breakdown Voltage t = 1000 hrs Long Term Stability T = 25C 0.1C IR = 100 A VHYST Thermal Hysteresis (Note 8) www.national.com T = -40C to +125C 16 LM4040 LM4040-5.0 Electrical Characteristics (Extended Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of 0.5% and 1.0%, respectively. Symbol Parameter Conditions Typical (Note 4) VR Reverse Breakdown Voltage IR = 100 A Minimum Operating Current VR/T Average Reverse Breakdown Voltage Temperature Coefficient (Note 6) IR = 10 mA IR = 1 mA 20 IR = 100 A 20 VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA Change with Operating Current Change (Note 7) eN (Note 5) (Note 5) 25 75 50 125 mV (max) (Limit) 74 79 A (max) 83 88 A (max) V mV (max) A ppm/C 100 150 ppm/C (max) ppm/C 0.5 1 mA IR 15 mA ZR Limits 54 30 Units Limits 5.000 Reverse Breakdown Voltage IR = 100 A Tolerance(Note 6) IRMIN LM4040CEM3 LM4040DEM3 mV 1.0 1.0 mV (max) 1.4 1.8 mV (max) 8.0 8.0 mV (max) 12.0 15.0 mV (max) 1.1 1.1 (max) 3.5 mV Reverse Dynamic Impedance IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 0.5 Wideband Noise IR = 100 A 80 Vrms 120 ppm 0.08 % 10 Hz f 10 kHz VR VHYST Reverse Breakdown Voltage t = 1000 hrs Long Term Stability T = 25C 0.1C IR = 100 A Thermal Hysteresis (Note 8) T = -40C to +125C 17 www.national.com LM4040 LM4040-8.2 Electrical Characteristics (Industrial Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. Symbol VR Parameter Typical (Note 4) Conditions Reverse Breakdown Voltage IR = 150 A VR/T LM4040AIZ LM4040BIZ Limits Limits (Note 5) (Note 5) Minimum Operating Current 16 70 67 40 20 20 Average Reverse Breakdown IR = 10 mA Voltage Temperature IR = 1 mA Coefficient(Note 6) IR = 150 A Reverse Dynamic Impedance IAC = 0.1 IR eN Wideband Noise IR = 150 A VR Reverse Breakdown Voltage t = 1000 hrs Long Term Stability T = 25C 0.1C mV (max) 91 91 A (max) 95 95 A (max) 100 100 ppm/C (max) ppm/C ppm/C mV 1.3 1.3 mV (max) 2.5 2.5 mV (max) 10.0 10.0 mV (max) 18.0 18.0 mV (max) 1.5 1.5 (max) 7.0 IR = 1 mA, f = 120 Hz, mV (max) A 0.6 1 mA IR 15 mA Units (Limit) V 8.2 61 VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA Change with Operating Current Change (Note 7) ZR LM4040BIM3 8.192 Reverse Breakdown Voltage IR = 150 A Tolerance (Note 6) IRMIN LM4040AIM3 mV 0.6 130 Vrms 120 ppm 0.08 % 10 Hz f 10 kHz IR = 150 A VHYST Thermal Hysteresis (Note 8) www.national.com T = -40C to +125C 18 LM4040 LM4040-8.2 Electrical Characteristics (Industrial Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of 0.5% and 1.0%, respectively. Symbol VR Parameter Typical (Note 4) Conditions Reverse Breakdown Voltage IR = 150 A VR/T LM4040CIZ LM4040DIZ Limits Limits (Note 5) (Note 5) Minimum Operating Current 82 162 67 40 20 20 Average Reverse Breakdown IR = 10 mA Voltage Temperature IR = 1 mA Coefficient (Note 6) IR = 150 A Reverse Dynamic Impedance IAC = 0.1 IR eN Wideband Noise IR = 150 A VR Reverse Breakdown Voltage t = 1000 hrs Long Term Stability T = 25C 0.1C mV (max) 91 96 A (max) 95 100 A (max) 100 150 ppm/C (max) ppm/C ppm/C mV 1.3 1.7 mV (max) 2.5 3.0 mV (max) 10.0 15.0 mV (max) 18.0 24.0 mV (max) 1.5 1.9 (max) 7.0 IR = 1 mA, f = 120 Hz, mV (max) A 0.6 1 mA IR 15 mA Units (Limit) V 41 94 VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA Change with Operating Current Change (Note 7) ZR LM4040DIM3 8.192 Reverse Breakdown Voltage IR = 150 A Tolerance (Note 6) IRMIN LM4040CIM3 mV 0.6 130 Vrms 120 ppm 0.08 % 10 Hz f 10 kHz IR = 150 A VHYST Thermal Hysteresis (Note 8) T = -40C to +125C 19 www.national.com LM4040 LM4040-10.0 Electrical Characteristics (Industrial Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of 0.1% and 0.2%, respectively. Symbol VR Parameter Typical (Note 4) Conditions Reverse Breakdown Voltage IR = 150 A VR/T LM4040AIZ LM4040BIZ Limits Limits (Note 5) (Note 5) Minimum Operating Current 20 85 75 40 20 20 Average Reverse Breakdown IR = 10 mA Voltage Temperature IR = 1 mA Coefficient (Note 6) IR = 150 A Reverse Dynamic Impedance IAC = 0.1 IR eN Wideband Noise IR = 150 A VR Reverse Breakdown Voltage t = 1000 hrs Long Term Stability T = 25C 0.1C mV (max) 100 100 A (max) 103 103 A (max) 100 100 ppm/C (max) ppm/C ppm/C mV 1.5 1.5 mV (max) 3.5 3.5 mV (max) 12.0 12.0 mV (max) 23.0 23.0 mV (max) 1.7 1.7 (max) 8.0 IR = 1 mA, f = 120 Hz, mV (max) A 0.8 1 mA IR 15 mA Units (Limit) V 10 75 VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA Change with Operating Current Change (Note 7) ZR LM4040BIM3 10.00 Reverse Breakdown Voltage IR = 150 A Tolerance (Note 6) IRMIN LM4040AIM3 mV 0.7 180 Vrms 120 ppm 0.08 % 10 Hz f 10 kHz IR = 150 A VHYST Thermal Hysteresis (Note 8) www.national.com T = -40C to +125C 20 LM4040 LM4040-10.0 Electrical Characteristics (Industrial Temperature Range) Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of 0.5% and 1.0%, respectively. Symbol VR Parameter Typical (Note 4) Conditions Reverse Breakdown Voltage IR = 150 A VR/T Minimum Operating Current LM4040DIZ Limits Limits (Note 5) (Note 5) 40 20 20 100 198 IR = 1 mA, f = 120 Hz, eN Wideband Noise VR Reverse Breakdown Voltage t = 1000 hrs Long Term Stability T = 25C 0.1C 110 A (max) 103 113 A (max) 100 150 ppm/C (max) ppm/C ppm/C mV 1.5 2.0 mV (max) 3.5 4.0 mV (max) 12.0 18.0 mV (max) 23.0 29.0 mV (max) 1.7 2.3 (max) mV 0.7 IR = 150 A 10 Hz f 10 kHz mV (max) 100 8.0 IAC = 0.1 IR mV (max) A 0.8 1 mA IR 15 mA Units (Limit) V 75 Average Reverse Breakdown IR = 10 mA Voltage Temperature IR = 1 mA Coefficient (Note 6) IR = 150 A Reverse Dynamic Impedance LM4040CIZ 50 115 VR/IR Reverse Breakdown Voltage IRMIN IR 1 mA Change with Operating Current Change (Note 7) ZR LM4040DIM3 10.00 Reverse Breakdown Voltage IR = 150 A Tolerance (Note 6) IRMIN LM4040CIM3 180 Vrms 120 ppm 0.08 % IR = 150 A VHYST Thermal Hysteresis (Note 8) T = -40C to +125C 21 www.national.com LM4040 Electrical Characteristics(Notes) Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. Note 2: The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature), JA (junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is PDmax = (TJmax - TA)/JA or the number given in the Absolute Maximum Ratings, whichever is lower. For the LM4040, TJmax = 125C, and the typical thermal resistance (JA), when board mounted, is 326C/W for the SOT-23 package, and 180C/W with 0.4" lead length and 170C/W with 0.125" lead length for the TO-92 package and 415C/W for the SC70 Package. Note 3: The human body model is a 100 pF capacitor discharged through a 1.5 k resistor into each pin. The machine model is a 200 pF capacitor discharged directly into each pin. Note 4: Typicals are at TJ = 25C and represent most likely parametric norm. Note 5: Limits are 100% production tested at 25C. Limits over temperature are guaranteed through correlation using Statistical Quality Control (SQC) methods. The limits are used to calculate National's AOQL. Note 6: The boldface (over-temperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage Tolerance [(VR/T)(maxT)(VR)]. Where, VR/T is the VR temperature coefficient, maxT is the maximum difference in temperature from the reference point of 25C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total over-temperature tolerance for the different grades in the industrial temperature range where maxT = 65C is shown below: A-grade: 0.75% = 0.1% 100 ppm/C x 65C B-grade: 0.85% = 0.2% 100 ppm/C x 65C C-grade: 1.15% = 0.5% 100 ppm/C x 65C D-grade: 1.98% = 1.0% 150 ppm/C x 65C E-grade: 2.98% = 2.0% 150 ppm/C x 65C The total over-temperature tolerance for the different grades in the exteded temperature range where max T = 100 C is shown below: C-grade: 1.5% = 0.5% 100 ppm/C x 100C D-grade: 2.5% = 1.0% 150 ppm/C x 100C E-grade: 3.5% = 2.0% 150 ppm/C x 100C Therefore, as an example, the A-grade LM4040-2.5 has an over-temperature Reverse Breakdown Voltage tolerance of 2.5V x 0.75% = 19 mV. Note 7: Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change must be taken into account separately. Note 8: Thermal hysteresis is defined as the difference in voltage measured at +25C after cycling to temperature -40C and the 25C measurement after cycling to temperature +125C. www.national.com 22 LM4040 Typical Performance Characteristics Temperature Drift for Different Average Temperature Coefficient Output Impedance vs Frequency 01132304 01132310 Output Impedance vs Frequency Reverse Characteristics and Minimum Operating Current 01132312 01132311 Noise Voltage vs Frequency 01132313 23 www.national.com LM4040 Start-Up Characteristics LM4040-2.5 RS = 30k 01132305 01132307 LM4040-5.0 RS = 30k LM4040-10.0 01132308 01132309 Functional Block Diagram 01132314 www.national.com RS = 30k 24 The LM4040 is a precision micro-power curvature-corrected bandgap shunt voltage reference. For space critical applications, the LM4040 is available in the sub-miniature SOT-23 and SC70 surface-mount package. The LM4040 has been designed for stable operation without the need of an external capacitor connected between the "+" pin and the "-" pin. If, however, a bypass capacitor is used, the LM4040 remains stable. Reducing design effort is the availability of several fixed reverse breakdown voltages: 2.048V, 2.500V, 3.000V, 4.096V, 5.000V, 6.000, 8.192V, and 10.000V. The minimum operating current increases from 60 A for the LM40402.048 and LM4040-2.5 to 100 A for the LM4040-10.0. All versions have a maximum operating current of 15 mA. LM4040s in the SOT-23 packages have a parasitic Schottky diode between pin 2 (-) and pin 3 (Die attach interface contact). Therefore, pin 3 of the SOT-23 package must be left floating or connected to pin 2. LM4040s in the SC70 have a parasitic Schottky diode between pin 1 (-) and pin 2 (Die attach interface contact). Therefore, pin 2 must be left floating or connected to pin1. In a conventional shunt regulator application (Figure 1) , an external series resistor (RS) is connected between the supply voltage and the LM4040. RS determines the current that flows through the load (IL) and the LM4040 (IQ). Since load current and supply voltage may vary, RS should be small enough to supply at least the minimum acceptable IQ to the LM4040 even when the supply voltage is at its minimum and the load current is at its maximum value. When the supply voltage is at its maximum and IL is at its minimum, RS should be large enough so that the current flowing through the LM4040 is less than 15 mA. RS is determined by the supply voltage, (VS), the load and operating current, (IL and IQ), and the LM4040's reverse breakdown voltage, VR. The 4.096V version allows single +5V 12-bit ADCs or DACs to operate with an LSB equal to 1 mV. For 12-bit ADCs or DACs that operate on supplies of 10V or greater, the 8.192V version gives 2 mV per LSB. The typical thermal hysteresis specification is defined as the change in +25C voltage measured after thermal cycling. Typical Applications 01132315 FIGURE 1. Shunt Regulator 25 www.national.com LM4040 The device is thermal cycled to temperature -40C and then measured at 25C. Next the device is thermal cycled to temperature +125C and again measured at 25C. The resulting VOUT delta shift between the 25C measurements is thermal hysteresis. Thermal hysteresis is common in precision references and is induced by thermal-mechanical package stress. Changes in environmental storage temperature, operating temperature and board mounting temperature are all factors that can contribute to thermal hysteresis. Applications Information LM4040 Typical Applications (Continued) 01132316 **Ceramic monolithic *Tantalum FIGURE 2. LM4040-4.1's Nominal 4.096 breakdown voltage gives ADC12451 1 mV/LSB www.national.com 26 LM4040 Typical Applications (Continued) 01132317 FIGURE 3. Bounded amplifier reduces saturation-induced delays and can prevent succeeding stage damage. Nominal clamping voltage is 11.5V (LM4040's reverse breakdown voltage +2 diode VF). 01132318 FIGURE 4. Protecting Op Amp input. The bounding voltage is 4V with the LM4040-2.5 (LM4040's reverse breakdown voltage + 3 diode VF). 27 www.national.com LM4040 Typical Applications (Continued) 01132319 FIGURE 5. Precision 4.096V Reference 01132321 01132322 FIGURE 6. Precision 1 A to 1 mA Current Sources www.national.com 28 LM4040 Physical Dimensions inches (millimeters) unless otherwise noted Plastic Surface Mount Package (M3) NS Package Number MF03A (JEDEC Registration TO-236AB) Plastic Package (Z) NS Package Number Z03A 29 www.national.com LM4040 Precision Micropower Shunt Voltage Reference Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Molded Package (SC70) NS Package Number MAA05A LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: ap.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.