LITE-ON SEMICONDUCTOR MBR1070CT thru 10100CT REVERSE VOLTAGE - 70 to 100 Volts FORWARD CURRENT - 10 Amperes SCHOTTKY BARRIER RECTIFIERS TO-220AB FEATURES Metal of silicon rectifier,majority carrier conducton Guard ring for transient protection Low power loss, high efficiency High current capability, low VF High surge capacity Plastic package has UL flammability classification 94V-0 For use in low voltage,high frequency inverters,free whelling,and polarity protection applications IEC 61000-4-2, level 4 (ESD), >15KV (air) B L M C D A K E PIN 1 2 3 F MECHANICAL DATA Case : TO-220AB molded plastic Polarity : As marked on the body Weight : 0.08 ounces, 2.24 grams Mounting position : Any Max. mounting torque = 0.5 N.m (5.1 Kgf.cm) N H H PIN 1 5.84 8.26 6.86 9.28 F 12.70 4.20 14.73 2.29 0.51 0.30 3.53 3.56 2.79 1.14 0.64 4.09 4.83 L M 1.14 1.40 2.92 2.03 N All Dimensions in millimeter PIN 2 CASE PIN 3 D I J K J TO-220AB MAX. MIN. 14.40 15.20 9.65 10.67 2.54 3.43 E G H G I DIM. A B C MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. CHARACTERISTICS SYMBOL MBR1070CT MBR1080CT MBR1090CT Maximum Recurrent Peak Reverse Voltage @IR=100uA VRRM 70 80 90 Maximum RMS Voltage @IR=100uA VRMS 49 56 VDC 70 Maximum DC Blocking Voltage @IR=100uA Maximum Average Forward RectifiedCurrent at Tc=100 (See Fig.1) Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load 70 90 100 V V I(AV) 10 A IFSM 120 A V/us VF 0.85 0.75 0.95 0.85 V @TJ =25 @TJ =125 IR 0.01 15 mA CJ 300 pF R0JC 3.0 /W TJ -55 to +150 TSTG -55 to +175 Typical Thermal Resistance (Note 3) Storage Temperature Range 63 10000 Typical Junction Capacitance, per element (Note 2) Operating Temperature Range V dv/dt @IF=5A @IF=5A @IF=10A @IF=10A Maximum DC Reverse Current at Rated DC Blocking Voltage 100 TJ =25 TJ =125 TJ =25 TJ =125 Voltage Rate of Change (Rated VR) Maximum Forward Voltage, (Note 1) 80 MBR10100CT UNIT NOTES : 1. 300us Pulse Width, 2% Duty Cycle. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Thermal Resistance Junction to Case. REV. 8, Jul-2012, KTHC13 AVERAGE FORWARD CURRENT, (A) FIG.1 - FORWARD CURRENT DERATING CURVE 10 8 6 4 2 RESISTIVE OR INDUCTIVE LOAD 0 75 50 25 100 125 150 175 PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTIC CURVES MBR1070CT thru MBR10100CT FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 120 100 80 60 40 20 8.3ms Single Half-Sine-Wave 0 1 2 5 CASE TEMPERATURE , () FIG.3 - TYPICAL REVERSE CHARACTERISTICS 50 100 FIG.4 - TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT ,(A) 100 TJ = 100 10 TJ = 125 10 TJ = 75 1.0 0.1 0.01 TJ = 25 TJ = 25 1 PULSE WIDTH 300us 2% Duty cycle 0.1 0.001 0 20 40 60 80 100 0.1 140 120 0.2 PERCENT OF RATED PEAK REVERSE VOLTAGE ,(%) 0.3 0.4 0.5 FIG.5 - TYPICAL JUNCTION CAPACITANCE 100 TJ = 25 C, f= 1MHz 10 0.1 1 0.6 0.7 0.8 0.9 1 1.1 INSTANTANEOUS FORWARD VOLTAGE , (V) 1000 CAPACITANCE , (pF) INSTANTANEOUS REVERSE CURRENT ,(mA) 20 10 NUMBER OF CYCLES AT 60Hz 4 10 REVERSE VOLTAGE , (V) 100 1.2 Legal Disclaimer Notice MBR1070CT thru MBR10100CT Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.