Wire-wound Chip Inductors - Open Wound CTAC0603F Series From 3.9nH to 56nH www.ctparts.com SPECIFICATIONS Parts are available in 10% inductance tolerance only. Part Inductance Number (nH) CTAC0603F-3N9K 3.9 CTAC0603F-4N7K 4.7 CTAC0603F-5N6K 5.6 CTAC0603F-6N8K 6.8 CTAC0603F-8N2K 8.2 CTAC0603F-10NK 10 CTAC0603F-12NK 12 CTAC0603F-15NK 15 CTAC0603F-18NK 18 CTAC0603F-22NK 22 CTAC0603F-27NK 27 CTAC0603F-33NK 33 CTAC0603F-39NK 39 CTAC0603F-47NK 47 CTAC0603F-56NK 56 Test Freq. Q (MHz) Min. 300 80 300 80 300 80 300 80 300 80 300 70 300 70 300 70 300 70 300 70 300 70 300 70 300 70 300 70 300 70 SRF (MHz) Min. >3000 >3000 >3000 >3000 >3000 >3000 >3000 2500 2500 2400 1600 1600 1500 1500 1300 DCR (m) Max. 3.0 3.6 3.8 4.5 5.3 6.9 8.3 11.5 12.8 11.3 17.0 26.9 30.7 34.5 38.4 IDC (mA) Max. 950 900 950 900 840 600 600 500 500 550 500 320 320 320 320 PHYSICAL DIMENSIONS Size mm inches A B C Max. Max. Max. 1.80 2.00 2.00 0.071 0.079 0.079 135 Not Shown at Actual Size 180 B 7.5 Description: SMD air core inductor Applications: Pager, Cordless phone & High Freq. Communication Products, Intercom, CATV Operating Temperature: -25C to +85C Inductance Tolerance: 10% Testing: Inductance is tested on a HP4286A at 300MHz Packaging: Tape & Reel. Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. 2.5 CHARACTERISTICS C A 0-0.3 PAD LAYOUT Unit: mm 0.64 Min. 0.64 Min. 0.64 Min. 1.02 Min. Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright (c) 2011 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 08.11.11