PL IA NT CO M *R oH S Features RoHS compliant* Space saving design Wide range of resistance values PC pin or solder lug terminals Metric shaft and bushing option Mounting brackets available Linear or audio taper versions PC - "Slimline" 22 mm Square Single Turn Panel Control Electrical Characteristics Standard Resistance Range Linear Tapers.....................................................................................................................................................................................500 ohms to 1 megohm Audio Tapers....................................................................................................................................................................................1 K ohms to 500 K ohms Total Resistance Tolerance ...............................................................................................................................................................................................20 % Independent Linearity .........................................................................................................................................................................................................5 % Absolute Minimum Resistance........................................................................................................................................................................5 ohms maximum Effective Electrical Angle ............................................................................................................................................................................................270 5 Contact Resistance Variation ..................................................................................................................................................................7 % of total resistance Dielectric Withstanding Voltage (MIL-STD-202, Method 301) Sea Level ................................................................................................................................................................................................1,000 VAC minimum 70,000 Feet ................................................................................................................................................................................................500 VAC minimum Insulation Resistance (500 V) ....................................................................................................................................................................1,000 ohms minimum Power Rating @ 70 C (Voltage Limited by Power Dissipation or 350 VAC, Whichever is Less) Linear ........................................................................................................................................................................................................................ .75 watt Audio ........................................................................................................................................................................................................................ .25 watt Theoretical Resolution.....................................................................................................................................................................................Essentially infinite Environmental Characteristics Operating Temperature Range .........................................................................................................................................................................+1 C to +125 C Storage Temperature Range ...........................................................................................................................................................................-40 C to +125 C Temperature Coefficient Over Storage Temperature Range ................................................................................................................................1000 ppm/C Vibration ...............................................................................................................................................................................................................................20 G Total Resistance Shift.....................................................................................................................................................................................1 % maximum Voltage Ratio Shift .......................................................................................................................................................................................20 % maximum Shock ...................................................................................................................................................................................................................................50 G Total Resistance Shift.....................................................................................................................................................................................1 % maximum Voltage Ratio Shift .......................................................................................................................................................................................20 % maximum Load Life .............................................................................................................................................................1,000 Hours @ Rated Power, 20 % RH, 70 C Total Resistance Shift...................................................................................................................................................................................10 % maximum Rotational Life (No Load) .......................................................................................................................................................................................50,000 cycles Total Resistance Shift (Linear taper)........................................................................................................................10 ohms or 12 %, whichever is greater Total Resistance Shift (Audio taper) .............................................................................................................................................................20 % maximum Contact Resistance Variation .............................................................................................................................................................................5 % maximum Moisture Resistance ....................................................................................................................................................MIL-STD-202, Method 103, Condition B Total Resistance Shift...................................................................................................................................................................................20 % maximum IP Rating ..............................................................................................................................................................................................................................IP 40 Mechanical Characteristics Stop Strength (1/4 " and 6 mm Shaft Diameters) ......................................................................................................................................79.09 N-cm (7 lb.-in.) Mechanical Angle .......................................................................................................................................................................................................300 5 Torque Starting (Detented) ................................................................................................................................................................0.5-1.5 N-cm (0.75-2.25 oz.-in.) Starting (Undetented)..........................................................................................................................................................1.5 N-cm (2.25 oz.-in.) maximum Running (Undetented) ................................................................................................................................................ 0.18 to 1.06 N-cm (0.25 to 1.5 oz.-in.) Mounting...............................................................................................................................................................................79.09 N-cm (7 lb.-in.) maximum Weight (Single Section) .....................................................................................................................................................................21 gm (0.75 oz.) maximum Terminals ......................................................................................................................................................................................................PC pin or solder lug Soldering Condition Manual Soldering......................................................................................................................96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire 370 C (700 F) max. for 3 seconds Wave Soldering ..............................................................................................................................................96.5Sn/3.0Ag/0.5Cu solder with no-clean flux 260 C (500 F) max. for 5 seconds Wash processes ........................................................................................................................................................................................Not recommended Marking ....................................................................................................................Manufacturer's trademark, resistance value, part number, and date code Ganging..............................................................................................................................................................................................................1 cup maximum Hardware .............................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number. Detents ..................................................................................................................................................................................................Center, 10, 20, 30, none For additional features or specifications not shown, consult factory. FOR ORDERING INFORMATION SEE PAGE 4. *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. PC - "Slimline" 22 mm Square Single Turn Panel Control Product Dimensions Axial PC Pins 14.7 0.5 DIA. (.578 .020) 22.2 0.25 (.874 .010) "F" 7.42 (.292) "L" 11.1 (.437) PANEL HOLE DIMENSIONS 9.53 (.375) 1 2 3 9.0 DIA. (.354) M9 X 0.75-6g SPL 6.25 (.246) .320 (8.13) 1.52 (.060) "F" = 11.1 (.437) 6.35 9.53 OR (.250) (.375) "E" = 3.18 DIA. (.125) 0.79 3 PLCS. (.031) 9.14 DIA. (.360) "E" 2 PLCS. 2.54 5.08 OR (.100) (.200) "L" = SEE SHAFT LENGTH TABLE Radial PC Pins 22.2 0.25 (.874 .010) "L" "F" 14.7 0.5 (.578 .020) DIA. .320 (8.13) 11.1 (.437) PANEL HOLE DIMENSIONS 9.53 (.375) 1 2 3 8.36 (.329) 3.18 DIA. (.125) 11.1 (.437) .28 (.011) 3 PLCS. 6.25 (.246) 0.79 (.031) 3 PLCS. "E" 2 PLCS. "F" = 6.35 9.53 OR (.250) (.375) "E" = 2.54 5.08 OR (.100) (.200) "L" = SEE SHAFT LENGTH TABLE TOLERANCES EXCEPT WHERE NOTED: 2 .25 (.010) .13 .XXX = (.005) .XX = 1 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 3 DIMENSIONS ARE: MM (INCHES) 9.14 DIA. (.360) PC - "Slimline" 22 mm Square Single Turn Panel Control Product Dimensions SOLDER LUGS "L" (Dimensions not given are the same as Axial PC pins. "F" 22.2 0.25 (.874 .010) 8.36 (.329) .28 3 PLCS. (.011) Axial PC PINS With Rear Mounting Bracket 7.75 (.305) 6.25 (.246) 6.83 (.269) 1.02 X 2.29 3 PLCS. (.040 X .090) 5.08 (.200) 2 PLCS. 2.03 3 PLCS. (.080) "F" = 6.35 9.53 OR (.250) (.375) 23.37 (.92) "L" 8.31 (.327) 11.43 (.450) 2 PLCS. "E" 2 PLCS. 15.2 18.87 (.600) (.743) 0.76 (.030) 4 PLCS. 17.07 (.672) 1.19 DIA. 7 PLCS. (.047) 5.87 (.231) Radial PC PINS With Side Mounting Bracket "E" = 1.19 DIA. 7 PLCS. (.047) 5.48 (.216) 23.37 (.92) "L" 5.08 2.54 OR (.200) (.100) 7.62 (.300) 2 PLCS. 5.08 (.200) 17.07 (.672) 12.62 (.497) 6.83 (.269) "E" = 0.76 4 PLCS. (.030) "E" 2 PLCS. 11.43 2 PLCS. (.450) 5.08 2.54 OR (.200) (.100) 0.79 (.031) 3 PLCS. "E" 2 PLCS. SHAFT STYLES AND ORIENTATION (Full CCW Rotation) Shaft Style C Shaft Style J "D" Shaft Style R 6.32 + 0.03/ - 0.08 (.249 + .001/ - .003) DIA. Shaft Style B 4.75 .051 DIA. (.187 .002) "D" "D" dimensions extend from shaft end to bushing face 1.19 (.047) 1.6 (.063) 1.6 (.063) "D" = (shaft length, FMS) - (bushing length) Shaft Orientations Shaft Styles C, J Shaft Styles B, R 60 2 120 2 DIMENSIONS: Shaft Style Y 6.32 + 0.03/ - 0.08 (.249 + .001/ - .003) DIA. 6.00 DIA. (.236) 3.94 + .051/ - .025 (.155 + .002/ - .001) 5.54 .076 (.218 .003) 1.57 (.062) 4.7 DIA. (.185) 1.19 (.047) Slot depth (Y shaft) 9.65 (.380) for shafts <1 " (2.54) length; 14.7 (.520) for shafts 1 " (2.54) length Shaft Style Y 60 2 MM (IN.) TOLERANCES EXCEPT WHERE NOTED: .25 (.010) .13 .XXX = (.005) .XX = Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. How to Order PC "Slimline" Panel Controls P C W 1 J - B 2 4 - B A B 1 0 3 L RoHS IDENTIFIER Code Description L Compliant SHAFT LENGTH (FMS) Available Shaft Code Description Styles 16 1/2 " (12.7 mm) Length B 20 5/8 " (15.9 mm) Length J 24 3/4 " (19 mm) Length B, C, J, Y 28 7/8 " (22.2 mm) Length B, C, J, Y 32 1 " (25.4 mm) Length B, C, J, Y 36 1-1/8 " (28.6 mm) Length B, C, J, Y Metric 19 19 mm Length R 22 22 mm Length R 24 24 mm Length R SHAFT STYLES (See Outline Drawing) Code Description B 1/4 " (6.35 mm) Dia. Slotted C 1/4 " (6.35 mm) Dia. Flatted J 3/16 " (4.76 mm) Dia. Flatted R 6 mm Dia. Slotted (Use Metric Lengths Only) Y 3/16 " (4.76 mm) Dia. Split Shaft ANTI-ROTATION LUG Code Description J 9:00 Position D None 1 NO. SECTIONS Single BUSHING CONFIGURATION Available Shaft Styles All Code Description W 9 mm x .250 " (6.35 mm) Length Threaded M9 x 0.75 6g 5 Pl L 9 mm x .375 " (9.53 mm) Length Threaded M9 x 0.75 6g 5 Pl B, C, R Code 501 102 252 502 RESISTANCE VALUES TR Code TR Code TR 500 103 10 K 104 100 K 1 K 203 20 K 254 250 K 2.5 K 253 25 K 504 500 K 5 K 503 50 K 105 1 M ELEMENT TAPER VERSIONS Code Taper Description B Lin. CP 20 % D CW Audio CP 20 % G CCW Audio CP 20 % DETENT CONFIGURATIONS Code Taper Description A No Detents B 10 Detents C Center Detent Only D 20 Detents E 30 Detents F CCW Detent Only HOUSING TERMINAL CONFIGURATION Code Features A B C D E F Rear Mounting Bracket X Side Mounting Bracket X Axial Terminals .100 " (2.54 mm) Centers X X Radial Terminals .100 " (2.54 mm) Centers X X Radial Terminals .200 " (5.08 mm) Centers X Solder Lugs .200" (5.08 mm) Centers X Axial Terminals .200 " (5.08 mm) Centers Hardware Included X X X X G H J X K X X L M X X N X X X X X X X X X X X X X Panel mount hardware not included as standard on bracketed versions. The sample part number demonstrates the identification code for Bourns Slimline Potentiometers. The part number shown is a commonly used model, typically available from stock. Boldface features are Bourns standard options. All others are available with higher minimum order quantities. Asia-Pacific: Tel: +886-2 2562-4117 * Fax: +886-2 2562-4116 Europe: Tel: +41-41 768 5555 * Fax: +41-41 768 5510 The Americas: Tel: +1-951 781-5500 * Fax: +1-951 781-5700 www.bourns.com REV. 08/09 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.