Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/TP
– EEE-57 –
A±0.2
W
()Reference size
L
φD±0.5
H
B±0.2
(I)
K
(P) (I)
+
–
0.3 max.
Pressure Relief (φ10 and larger)
220
TPA
Capacitance (µF)
Rated voltage Mark
Series identification
Lot number
Negative polarity
marking (–)
Mark for Lead-Free
Products Black Dot
(Square)
■Features
● Lower ESR at Low temperature after endurance
● Endurance: 3000 h at 125 °C(D8 size : 2000 h)
● Automotive
● Vibration-proof product is available upon request. (φ8 mm and larger)
● RoHS directive compliant
Surface Mount Type
Series: TP Type: V
TP High temperature Lead-Free refl ow(suffi x:A✽)
■Specifi cations
Category Temp. Range –40 °C to +125 °C
Rated W.V.Range 10 V.DC to 35 V.DC
Nominal Cap.Range 47 µF to 470 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV (µA) After 2 minutes
tan δPlease see the attached standard products list
Endurance
After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours(D8 size : 2000 h).
the capacitors shall meet the limits specifi ed below.
Capacitance change ±30 % of initial measured value
tan δ< 300 % of initial specifi ed value
DC leakage current < initial specifi ed value
ESR after
Endurance
(액/100kHz)
Size Code
D8 F G
Initial(+20 °C) 0.45 0.2 0.15
After 2000 h(-40 °C) 40 4.5 3.5
Shelf Life After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan δ< initial specifi ed value
DC leakage current < initial specifi ed value
■Di men sions in mm (not to scale)■Marking
Example:10 V 220 µF Marking color : BLACK
Size
code DLA, B H I W P K
D8 6.3 7.7±0.3 6.6
7.8 max.
2.6 0.65±0.1 1.8
0.35 - 0.20
F 8.0 10.2±0.3 8.3
10.0max.
3.4 0.90±0.2 3.1
0.70±0.20
G10.0 10.2±0.3 10.3
12.0max.
3.5 0.90±0.2 4.6
0.70±0.20
+ 0.15
Frequency (Hz)
120 1 k 10 k 100 k to
Correction factor 0.65 0.85 0.95 1.00
■Frequency correction factor for ripple current
(Unit : mm)
A 10 V
C 16 V
E 25 V
V 35 V
Rated Voltage Mark
00 Nov. 2012
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/TP
– EEE-58 –
■Standard Prod ucts
✽ Size code( ):Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 1A씮A, 1C씮C, 1E씮E, 1V씮V
· Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
W.V. Cap.
(±20 %)
Case size Specifi cation
Part No.
(RoHS:compliant) Refl ow
Min.
Packaging Q'ty
Dia. Length ✽Size
Code
Ripple
Current
(100 kHz)
(+125 °C)
ESR
(100 kHz)
(액)
tan δ
(120 Hz)
(+20 °C)
Taping
(V) (µF) (mm) (mm)
(mA r.m.s.)
+20 °C -40 °C
(pcs)
10
220 8 10.2 F 270 0.20 3 0.30 EEETP1A221AP (8) 500
330 810.2(F)2700.20 3 0.30
EEETPA331UAP (8) 500
10 10.2 G 500 0.15 2 0.30 EEETP1A331AP (8) 500
470 10 10.2 G 5000.15 2 0.30
EEETP1A471AP (8) 500
16
100 6.3 7.7 D8 197 0.45 5 0.23 EEETPC101XAP (8) 900
810.2F 2700.20 3 0.23 EEETP1C101AP (8) 500
220 8 10.2 F 270 0.20 3 0.23 EEETP1C221AP (8) 500
330 10 10.2 G 5000.15 2 0.23
EEETP1C331AP (8) 500
470 10 10.2 G 5000.15 2 0.23
EEETP1C471AP (8) 500
25
100 8 10.2 F 270 0.20 3 0.18 EEETP1E101AP (8) 500
220 10 10.2 G 5000.15 2 0.18
EEETP1E221AP (8) 500
330 10 10.2 G 5000.15 2 0.18
EEETP1E331AP (8) 500
35
47 6.3 7.7 D8 197 0.45 5 0.16 EEETPV470XAP (8) 900
810.2F 2700.20 3 0.16 EEETP1V470AP (8) 500
100 8 10.2 F 270 0.20 3 0.16 EEETP1V101AP (8) 500
220 10 10.2 G 5000.15 2 0.16
EEETP1V221AP (8) 500
Endurance : 125 °C 3000 h (φ6.3҂7.7 < : 2000 h)
00 Nov. 2012
