Type TIM Solid Tantalum Capacitors
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Specications
Molded, Radial Lead, Solid Tantalum Capacitors
The Type TIM radial molded solid tantalum capacitor
is great for saving board space with its higher prole
and smaller board space requirement. It is ideal for
high density packaging coupled with low DCL and
low ESR performance needed in compact power sup-
ply designs. The radius on the vertical side allows for
polarization during automatic or hand insertion. The
Type TIM is available in bulk or on radial tape and reel.
Highlights
♦ Precision Molded
♦ Low DCL
♦ Low ESR
♦ Radius on ver tical edge for polarity identication
♦ Excellent temperature stability
♦ Standos for easier ux removal
♦ Resistant to shock and vibraton
Capacitance Range:
Voltage Range:
Tolerance:
Operating Temperature Range:
DC Leakage:
Capacitance Change Maximum:
Maximum Power Dissipation:
Reel Packaging per EIA- RS-468:
0.10 µF to 220 µF
6 WVdc to 50 WVdc at 85 ºC
±10%, ±20%
–55 ºC to +125 ºC (with proper derating)
+25 ºC - See ratings limit
+85 ºC - 10 x 25 ºC limit
+125 ºC - 12.5 x 25 ºC limit
–10% @ –55 ºC
+10% @ +85 ºC
+15% @ +125 ºC
W & X .090 Watts
Y .100 Watts
Z .125 Watts
Case
Code Quantity
W 1,500 per 14" Reel
X 1,500 per 14" Reel
Y 1,500 per 14" Reel
Z N/A
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type TIM Solid Tantalum Capacitors
Part Numbering System
Capacitor Outline Drawing
.020 ±.006
(0.51 ±0.15)
(Stand Off)
.015 ±.005
(.38 ±0.13)
(Stand Off)
.050R ±.005
(1.27R ±0.13)
.025 ±.001
(.64 ±0.03)
.500 ±.125
(12.7 ±3.18)
.500 ±.125
(12.7 ±3.18)
.020 ±.001
(0.51 ±0.03)
W Case X, Y, Z Cases
H
W
E
S
Note:
On the “X” Case sizes,
the standoff appears
only between the
two leads
.051 ±0.03
T
W
H
E
S
H W T E S
Case Code Case Height Case Width Case Thickness Case to Wire Lead spacing
W.345 ±.008 .230 ±.005 .105 ±.005 .050 ±.010 .125 ±.005
(8.76 ±.203) (5.84 ±.127) (2.67 ±.127) (1.27 ±0.25) (3.18 ±0.127)
X.225 ±.015 .285 ±.015 .170 ±.015 .042 ±.010 .200 ±.005
(5.71 ±0.38 (7.24 ±.0.38) (4.32 ±.0.38) (1.07 ±.0.25) (5.08 ±.0.127)
Y.325 ±.015 .325 ±.015 .170 ±.015 .062 ±.010 .200 ±.005
(8.26 ±0.38) (8.26 ±.0.38) (4.32 ±.0.38) (1.57 ±.0.25) (5.08 ±.0.127)
Z.375 ±.015 .600 ±.015 .195 ±.015 .200 ±.010 .200 ±.005
(9.53 ±0.38) (15.24 ±.0.38) (4.95 ±.0.38) (5.08 ±.0.25) (5.08 ±.0.127)
Dimensions in inches
TIM 150 K 010 P 0 Z
Molded Case
Type Capacitance Tolerance Voltage Polar Case Code
TIM 104 = 0.10 µF K = ±10% 006 = 6 Vdc P = Polar 0 W
105 = 1.0 µF M = ±20% 010 = 10 Vdc X
225 = 2.2 µF 015 = 15 dc Y
186 = 18.6 µF 020 = 20 Vdc Z
157 = 150 µF 025 = 25 Vdc
035 = 35 Vdc
050 = 50 Vdc
Type TIM Solid Tantalum Capacitors
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Ratings
Max Max DF Max Ripple
Catalog Case DCL @ +25 ºC 25 ºC
Cap Part Number Code @ +25 ºC 120 Hz @ 120 Hz @ 1 kHz
(µF) (µA) (%) (mA rms) (mA rms)
6 WVdc @ 85 ºC
4 WVdc @ 125 ºC
22 TIM226*006P0X X 1 6 35 290
56 TIM566*006P0Y Y 5 6 89 570
68 TIM686*006P0Y Y 5 6 100 630
220 TIM227*006P0Z Z 10 6 350 1000
10 WVdc @ 85 ºC
7 WVdc @ 125 ºC
6.8 TIM685*010P0X X 1 6 18 150
10 TIM106*010P0W W 1 6 26 220
10 TIM106*010P0X X 1 6 26 220
15 TIM156*010P0W W 1 6 39 270
15 TIM156*010P0X X 1 6 39 270
22 TIM226*010P0Y Y 2 6 58 360
33 TIM336*010P0Y Y 2 6 87 440
39 TIM396*010P0Y Y 5 6 100 480
47 TIM476*010P0Y Y 5 6 120 590
56 TIM566*010P0Y Y 5 6 140 650
150 TIM157*010P0Z Z 10 6 390 920
15 WVdc @ 85 ºC
10 WVdc @ 125 ºC
5.6 TIM565*015P0X X 1 6 22 180
6.8 TIM685*015P0X X 1 6 27 180
8.2 TIM825*015P0X X 1 6 32 200
10 TIM106*015P0Y Y 1 6 35 270
15 TIM156*015P0Y Y 2 6 59 290
22 TIM226*015P0Y Y 5 6 87 360
27 TIM276*015P0Y Y 5 6 100 390
33 TIM336*015P0Y Y 5 6 130 440
20 WVdc @ 85 ºC
13 WVdc @ 125 ºC
5.6 TIM565*020POW W 1 6 29 180
6.8 TIM685*020POW W 1 6 36 200
25 WVdc @ 85 ºC
17 WVdc @ 125 ºC
3.3 TIM335*025P0W W 1 4 21 150
3.3 TIM335*025P0X X 1 6 21 150
4.7 TIM475*025P0X X 1 6 31 180
6.8 TIM685*025P0Y Y 1 6 45 200
10 TIM106*025P0X X 1 6 4 190
10 TIM106*025P0Y Y 1 6 66 240
12 TIM126*025P0Y Y 1 6 79 260
15 TIM156*025P0Y Y 2 6 99 290
CDE may improve your order and shorten delivery by substituting a tighter tolerance or higher voltage capacitors in the same case size.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type TIM Solid Tantalum Capacitors
Max Max DF Max Ripple
Catalog Case DCL @ +25 ºC 25 ºC
Cap Part Number Code @ +25 ºC 120 Hz @ 120 Hz @ 1 kHz
(µF) (µA) (%) (mA rms) (mA rms)
35 WVdc @ 85 ºC
23 WVdc @ 125 ºC
0.10 TIM104*035P0X X 1 6 1 9
0.22 TIM224*035P0X X 1 6 2 17
0.47 TIM474*035P0X X 1 6 4.3 36
1.00 TIM105*035P0X X 1 6 9.3 77
2.20 TIM225*035P0W W 1 4 20 120
2.20 TIM225*035P0X X 1 6 20 120
2.70 TIM275*035P0W W 1 4 25 140
3.30 TIM335*035P0X X 1 6 30 150
3.90 TIM395*035P0Y Y 1 6 35 180
4.70 TIM475*035P0X X 1 6 32 155
4.70 TIM475*035P0Y Y 1 6 43 200
6.80 TIM685*035P0Y Y 2 6 63 210
8.20 TIM825*035P0Y Y 5 6 76 220
10.00 TIM106*035P0Y Y 5 6 93 240
22.00 TIM226*035P0Z Z 10 6 200 400
27.00 TIM276*035P0Z Z 10 6 250 450
33.00 TIM336*035P0Z Z 10 6 300 490
50 WVdc @ 85 ºC
33 WVdc @ 125 ºC
0.10 TIM104*050P0X X 1 6 1.3 11
0.22 TIM224*050P0X X 1 6 2.9 24
0.33 TIM334*050P0X X 1 6 4.4 36
1.0 TIM105*050P0W W 1 4 13 86
1.0 TIM105*050P0X X 1 6 13 87
1.5 TIM155*050P0W W 1 4 19 100
1.5 TIM155*050P0X X 1 6 19 100
2.2 TIM225*050P0X X 1 6 29 120
4.7 TIM475*050P0Y Y 5 6 62 200
5.6 TIM565*050P0Y Y 5 6 74 220
6.8 TIM685*050P0Z Z 5 6 90 220
10.0 TIM106*050P0Z Z 5 6 130 270
15.0 TIM156*050P0Z Z 10 6 190 330
CDE may improve your order and shorten delivery by substituting a tighter tolerance or higher voltage capacitors in the same case size.
Type TIM Solid Tantalum Capacitors
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and data
(collectively, the “Information”) in this datasheet or other publication are subject to change. The customer
is responsible for checking, conrming and verifying the extent to which the Information contained in this
datasheet or other publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation
or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based
on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has
of operating conditions that such Cornell Dubilier company regards as typical for such applications, but
are not intended to constitute any guarantee, warranty or representation regarding any such matter – and
Cornell Dubilier specically and expressly disclaims any guarantee, warranty or representation concerning
the suitability for a specic customer application, use, storage, transportation, or operating environment.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given
gratis (unless otherwise specied by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability
for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality
and safety standards regarding the design and manufacturing of its products, in light of the current state
of the art, isolated component failures may still occur. Accordingly, customer applications which require a
high degree of reliability or safety should employ suitable designs or other safeguards (such as installation
of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the
failure of an electrical component does not result in a risk of personal injury or property damage. Although
all product-related warnings, cautions and notes must be observed, the customer should not assume that all
safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be
required.
