09-Serie_IZ-metal-F3-A_08-Serie IP-A 31/10/14 08:17 Page48 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - momentary Distinctive features and specifications UG1410A Rear mounting for easier installation Momentary metal models Fixed or variable panel thickness Screw version available up to 4A Sealed to IP67 Illuminated or non-illuminated Flat actuator for optional marking B1 ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS * Front panel sealing : IP67 according to IEC 60529 * Shock resistance : 100 g according to IEC 512-4, test 6c * Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d * Salt spray : IEC 512-6, test 11f * Operating temperature : -40C to +85C * Panel thickness : - IZM : 3 mm (.118) max. - IZN : 4 mm (.157) max. * Total travel : 1,8 mm (.070) +/- 0,3 mm * Typical operating force : 6N +/- 2N * Low level or mechanical life : 1.000.000 cycles * Torque : IZN : 1 Nm max. IZM : 0,7 Nm max. applied to nut * Soldering : 320C max. for 3 sec. ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : - Gold plated silver contacts (code 4) : 200mA 48VDC - Silver contacts (code 2) - screw terminals : 4A 48VDC * Electrical life at full load : 500.000 cycles * Initial contact resistance : 100 m max. * Insulation resistance : 1 G min. at 500VDC * Dielectric strength : 1.000 Vrms 50 Hz MATERIALS * Case : thermoplastic UL94-V0 * Plunger : polyamide * Bushing/bezel : brass, nickel plated * Contacts : 4 : silver, gold plated 2 : silver (screw terminals) * Multi-wire lead AWG20, section 0,6 mm2 * LED wire : AWG26, section 0,12 mm2 * Lens : polycarbonate * Terminal seal : epoxy (except screw terminals) LED COMPONENT SPECIFICATIONS LED colour Forward current Super red (L0S) 20mA Typ. forward voltage Max. forward voltage 2,1V 2,3V Yellow (L0Y) 20mA 2,1V 2,3V Green (L0G) 20mA 2,1V 2,3V Blue (L0B) 20mA 3,2V 3,8V White (L0W) 20mA 3,35V 4,25V A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage LED forward current On flying lead versions, the LED resistor can be integrated by APEM on request. PANEL CUT-OUT MATRIX MOUNTING 27.00 (1.063) 4.00 Maxi (.157MAX) 27.00 (1.063) O16.20 (.637DIA) (.118MAX) 3.00 Maxi Flat seal O-ring O16.20 (.637DIA) 1 2 IZM (adjustable hex nut) B1-48 IZN (fixed hex nut) www.apem.com APEM 09-Serie_IZ-metal-F3-A_08-Serie IP-A 31/10/14 08:17 Page49 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - momentary Overview IZ Electrical function Models SERIES M N Metal, variable panel thickness Metal, fixed panel thickness 3 Actuator shapes R P Actuator colours 1 B 2 3 4 5 6 7 8 9 A Blue Dark blue Black Green Grey Yellow Red White Bright chrome Orange Satin chrome Normally open (NO) Round, curved Round, flat Bushing & bezel finish N Nickel plated Solder lugs Flying leads Straight PC Quick-connect (non-illuminated) V Screw (non-illuminated & N model only) S F P Z 4 2 Silver, gold plated Silver (screw term.) B1 LED colours Blank L0S L0Y L0G L0B L0W Other : on request. Contacts Terminals Non-illum. Super red Yellow Green Blue White ABOUT THIS SERIES On the following pages, you will find successively : model structure of switches and options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Mounting accessories : Standard hardware supplied : - IZM : 1 castellated nickel plated brass nut U6915 + 1 silicone flat seal + 1 hex nut 19 mm (.748) across flats U4116. - IZN : 1 castellated nickel plated brass nut U6915 + 1 O-ring Packaging unit : 25 pieces for flying lead models - 40 pieces for other models The company reserves the right to change specifications without notice. APEM www.apem.com B1-49 09-Serie_IZ-metal-F3-A_08-Serie IP-A 31/10/14 08:17 Page50 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - momentary For variable panel thickness : IZM (-) Non-illuminated 2.40 (.094) 8.70 (.342) 1.00 (.039) (+) 2.80 (.110) Illuminated 1.20 (.047) MODEL STRUCTURE Actuator marking available on IZMP models (symbol 10 mm max.). On request. 12.00 (.472) 6.20 (.244) EPOXY Normally Open NO LED Cathode (-) NO 2.00 (.078) 6.10 (.240) Flat actuator IZMP3S4 Normally Open 5.20 (.204) Curved actuator IZMR3S4 O16.00x100SI (.630DIAx100IS) O12.00 (.472DIA) 2.00 (.078) Illuminated - solder lug terminals 2.00 (.078) Illuminated - flying lead terminals 12.00 (.472) 15.20maxi. (.598MAX.) Flat actuator IZMP3F4 Normally Open O10.50 (.413DIA) Normally Open 50010 (19.68.393) Curved actuator IZMR3F4 O16.00x100SI (.630DIAx100IS) O12.00 (.472DIA) 2.00 (.078) Also available with straight PC terminals : IZM*3P4. LED colour is indicated by the bottom of the switch. Wire colours : black : NO contact, red : LED anode (+), blue : LED cathode (-) O16.00x100SI (.630DIAx100IS) Normally Open Flat actuator IZMP3S4 Normally Open EPOXY 2.65 (.104) 2.80 (.110) Curved actuator IZMR3S4 12.00 (.472) O12.00 (.472DIA) 2.00 (.078) Non-illuminated - solder lug terminals 3.20 (.126) B1 4.55 (.179) 5.20 (.204) * Five LED colours * Tin plated LED terminals * Gold plated contacts Also available with straight PC terminals : IZM*3P4 and quick-connect terminals : IZM*3Z4. For non-illuminated FLYING LEAD versions, refer to illuminated models above. Non-illuminated have 2 wires only. B1-50 www.apem.com APEM 09-Serie_IZ-metal-F3-A_08-Serie IP-A 31/10/14 08:17 Page51 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - momentary For fixed panel thickness : IZN * Five LED colours * Tin plated LED terminals Quick-connect Z Non-illuminated (+) 2.00X0.40 (.078X.015) 7.10 (.279) 1.00X0.40 (.039X.015) 3.60 (.141) 1.00 (.039) 3.60 (.141) (-) 2.40 (.094) Straight P 1.50 (.059) Solder lug S 1.20 (.047) 2.80X0.50 (.110X.019) Illuminated MODEL STRUCTURE Actuator marking available on IZNP models (symbol 10 mm max.). On request. O16.00x100SI (.630DIAx100IS) 20.00 (.787) O12.00 (.472DIA) 2.00 (.078) Illuminated - solder lug terminals 8.70 (.342) Normally Open NO NO LED Cathode (-) 2.00 (.078) Also available with straight PC terminals : IZN*3P4. LED colour is indicated by the bottom of the switch. O16.00x100SI (.630DIAx100IS) Illuminated - sealed flying lead terminals 2.00 (.078) 20.00 (.787) O12.00 (.472DIA) 2.00 (.078) Normally Open 3.60 (.141) Flat actuator IZNP3S4 11.00 (.433) O18.00 (.708DIA) 4.50 (.177) Curved actuator IZNR3S4 4.00 (.157) GOLD PLATED CONTACTS 8.70 (.342) Curved actuator IZNR3F4 4.00 (.157) GOLD PLATED CONTACTS Normally Open Normally Open 50010 (19.68.393) Flat actuator IZNP3F4 18.50maxi. (.728MAX. ) O18.00 (.708DIA) Wire colours : black : NO contact, red : LED anode (+), blue : LED cathode (-) Non-illuminated - solder lug terminals O16.00x100SI (.630DIAx100IS) 2.00 (.078) 8.70 (.342) 4.00 (.157) O18.00 (.708DIA) 11.00 (.433) Flat actuator IZNP3S4 Normally Open Normally Open Also available with straight PC terminals : IZN*3P4 and quick-connect terminals : IZN*3Z4. 3.60 (.141) Curved actuator IZNR3S4 20.00 (.787) O12.00 (.472DIA) GOLD PLATED CONTACTS 2.00 (.078) For non-illuminated FLYING LEAD versions, refer to illuminated models above. Non-illuminated have 2 wires only. APEM www.apem.com B1-51 B1 09-Serie_IZ-metal-F3-A_08-Serie IP-A 31/10/14 08:17 Page52 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - momentary For fixed panel thickness : IZN - options Non-illuminated - screw terminals 11.00 (.433) O18.00 (.708DIA) 8.70 (.342) Normally open Normally open 7.00 Maxi (.275 MAX) Flat actuator IZNP3V2 4.00 (.157) SILVER CONTACTS Curved actuator IZNR3V2 20.00 (.787) O12.00 (.472DIA) 2.00 (.078) O16.00x100SI (.630DIAx100IS) B1 ACTUATOR COLOURS 1 : blue - B : dark blue - 2 : black - 3 : green - 4 : grey - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange A : satin chrome BUSHING AND BEZEL COLOURS LED COLOURS N : nickel plated (standard) Other : on request. Blank : non-illuminated L0S : super red - L0Y : yellow - L0G : green L0B : blue - L0W : white B1-52 www.apem.com APEM 10-Serie_IZ-metal-F1-A_08-Serie IP-A 31/10/14 08:16 Page53 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - latching Distinctive features and specifications UG1410A Rear mounting for easier installation Latching action metal models Fixed or variable panel thickness Sealed to IP67 Illuminated or non-illuminated Flat actuator for optional marking B1 ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS * Front panel sealing : IP67 according to IEC 60529 * Shock resistance : 100 g according to IEC 512-4, test 6c * Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d * Salt spray : IEC 512-6, test 11f * Robustness (non-illuminated) : IK06 according to EN 50102 (1 joule) * Operating temperature : -40C to +85C * Panel thickness : - IZM : 3 mm (.118) max. - IZN : 4 mm (.157) max. * Total travel : 2,5 mm (.098) +/-0,3 mm * Typical operating force : 5N +/- 2N * Low level or mechanical life : 200.000 cycles * Torque : IZN : 1 Nm max. IZM : 0,7 Nm max. applied to nut * Soldering : 320C max. for 3 sec. ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : 100mA 24VDC - 200.000 cycles * Initial contact resistance : 100 m max. * Insulation resistance : 1 G min. at 500VDC * Dielectric strength : 1.500 Vrms between terminals 1.000 Vrms between terminals and frame MATERIALS * Case : thermoplastic UL94-V0 * Plunger : polyamide * Bushing/bezel : brass, nickel plated * Contacts : silver, gold plated * Multi-wire lead AWG20, section 0,6 mm2 * LED wire : AWG26, section 0,12 mm2 * Lens : polycarbonate * Terminal seal : epoxy LED COMPONENT SPECIFICATIONS LED colour Forward current Super red (L0S) 20mA Typ. forward voltage Max. forward voltage 1,95V 1,95V Yellow (L0Y) 20mA 2V 2,05V Green (L0G) 20mA 2,1V 2,5V Blue (L0B) 20mA 3,2V 4V A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage LED forward current On flying lead versions, the LED resistor can be integrated by APEM on request. PANEL CUT-OUT MATRIX MOUNTING 27.00 (1.063) 4.00 Maxi (.157MAX) 27.00 (1.063) O16.20 (.637DIA) (.118MAX) 3.00 Maxi Flat seal O-ring O16.20 (.637DIA) 1 2 IZM (adjustable hex nut) IZN (fixed hex nut) The company reserves the right to change specifications without notice. APEM www.apem.com B1-53 10-Serie_IZ-metal-F1-A_08-Serie IP-A 31/10/14 08:16 Page54 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - latching Overview IZ Electrical function Models SERIES M N Metal, variable panel thickness Metal, fixed panel thickness 1 Actuator colours 1 B 2 3 4 5 6 7 8 9 A Blue Dark blue Black Green Grey Yellow Red White Bright chrome Orange Satin chrome OFF - ON Solder lugs Flying leads Straight PC Quick-connect Contacts 4 Silver, gold plated Round, curved Round, flat Bushing & bezel finish N S F P Z Actuator shapes R P B1 Terminals Nickel plated (standard) Other : on request. LED colours Blank L0S L0Y L0G L0B Non-illum. Super red Yellow Green Blue ABOUT THIS SERIES On the following pages, you will find successively : model structure of switches and options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Mounting accessories : Standard hardware supplied : - IZN : 1 castellated nickel plated brass nut U6915 + 1 O-ring - IZM : 1 castellated nickel plated brass nut U6915 + 1 silicone flat seal + 1 hex nut 19 mm (.748) across flats U4116. Packaging unit : 25 pieces for flying lead models - 40 pieces for other models B1-54 www.apem.com APEM 10-Serie_IZ-metal-F1-A_08-Serie IP-A 31/10/14 08:16 Page55 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - latching For variable panel thickness : IZM OFF (-) (+) 2.80 (.110) ON 1.10X0.50 (.043X.019) 8.40 (.330) 2.40 (.094) 4.20 (.165) Quick-connect Z 3.40 (.133) (+) 3.20 (.125) 1.40 (.055) (-) Straight P Solder lug S 2.30 (.090) * Four LED colours * Tin plated LED terminals * Gold plated contacts 1.20 (.047) 2.80 (.110) MODEL STRUCTURE Actuator marking available on IZMP models (symbol 10 mm max.). On request. Illuminated - solder lug terminals 2.00 (.078) O16.00x100SI (.630DIAx100IS) Curved actuator IZMR1S4 12.70 (.500) O12.00 (.472DIA) OFF - ON 0.50x0.60 (.019x.023) 5.08 (.200) Also available with straight PC terminals : IZM*1P4 & quick-connect terminals : IZM*1Z4. Illuminated - flying lead terminals 2.00 (.078) O16.00x100SI (.630DIAx100IS) 12.70 (.500) O12.00 (.472DIA) Curved actuator IZMR1F4 OFF - ON O13.00 (.511DIA) 12.00 (.472) OFF - ON 50010 (19.68.393) Flat actuator IZMP1F4 Wire colours : black : contact, red : LED anode(+), blue : LED cathode (-) Non-illuminated - solder lug terminals 2.00 (.078) O16.00x100SI (.630DIAx100IS) O12.00 (.472DIA) OFF - ON 12.70 (.500) Curved actuator IZMR1S4 3.20 (.125) 12.00 (.472) OFF - ON 16.00maxi. (.630MAX.) Flat actuator IZMP1S4 10.00 (.393) O13.00 (.511DIA) 12.00 (.472) OFF - ON 5.08 Also available with straight PC terminals : (.200) IZM*1P4 & quick-connect terminals : IZM*1Z4. Also available with straight PC terminals : IZM*1P4 & quick-connect 3.20 (.125) Flat actuator IZMP1S4 10.00 (.393) O13.00 (.511DIA) For non-illuminated FLYING LEAD versions, refer to illuminated models above. Non-illuminated have 2 wires only. APEM www.apem.com B1-55 B1 10-Serie_IZ-metal-F1-A_08-Serie IP-A 31/10/14 08:16 Page56 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - latching For fixed panel thickness : IZN OFF 2.80 (.110) 1.10X0.50 (.043X.019) 8.40 (.330) 2.40 (.094) 4.20 (.165) (+) ON Quick-connect Z 3.40 (.133) (-) 1.20 (.047) 2.80 (.110) MODEL STRUCTURE Illuminated - solder lug terminals O16.00x100SI (.630DIAx100IS) 20.00 (.787) 8.70 (.342) OFF - ON OFF - ON Illuminated - flying lead terminals O16.00x100SI (.630DIAx100IS) 20.00 (.787) OFF - ON 20.00maxi. (.787MAX.) Flat actuator IZNP1F4 O13.00 (.511DIA) 50010 (19.68.393) OFF - ON Wire colours : black : contact, red : LED anode(+), blue : LED cathode (-) Non-illuminated - solder lug terminals O16.00x100SI (.630DIAx100IS) 20.00 (.787) O12.00 (.472DIA) Curved actuator IZNR1S4 OFF - ON Flat actuator IZNP1S4 14.00 (.551) O13.00 (.511DIA) 2.00 (.078) Curved actuator IZNR1F4 8.70 (.342) 4.00 (.157) O12.00 (.472DIA) 2.00 (.078) Also available with straight PC terminals : IZN*1P4 & quick-connect terminals : IZN*1Z4. 3.20 (.125) 0.50x0.60 (.019x.023) 5.08 (.200) 8.70 (.342) Flat actuator IZNP1S4 14.00 (.551) O13.00 (.511DIA) OFF - ON Also available with straight PC terminals : IZN*1P4 & quick-connect terminals : IZN*1Z4. 5.08 (.200) 3.20 (.125) Curved actuator IZNR1S4 4.00 (.157) O12.00 (.472DIA) 2.00 (.078) Actuator marking available on IZNP models (symbol 10 mm max.). On request. 4.00 (.157) B1 (+) 3.20 (.125) 1.40 (.055) (-) Straight P Solder lug S 2.30 (.090) * Four LED colours * Tin plated LED terminals * Gold plated contacts For non-illuminated FLYING LEAD versions, refer to illuminated models above. Non-illuminated have 2 wires only. B1-56 www.apem.com APEM 10-Serie_IZ-metal-F1-A_08-Serie IP-A 31/10/14 08:16 Page57 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - latching Options ACTUATOR COLOURS 1 : blue - B : dark blue - 2 : black - 3 : green - 4 : grey - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange A : satin chrome BUSHING AND BEZEL COLOURS LED COLOURS N : nickel plated (standard) Other : on request. Blank : non-illuminated L0S : super red - L0Y : yellow - L0G : green L0B : blue APEM www.apem.com B1 B1-57 11-Serie_IZ-plastic-F3-A_08-Serie IP-A 31/10/14 08:16 Page58 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - momentary Distinctive features and specifications UG1410A Rear mounting for easier installation Momentary models Screw version available up to 4A Sealed to IP67 Illuminated or non-illuminated Flat actuator for optional marking B1 ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS * Front panel sealing : IP67 according to IEC 60529 * Shock resistance : 100 g according to IEC 512-4, test 6c * Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d * Salt spray : IEC 512-6, test 11f * Operating temperature : -40C to +85C * Panel thickness : 3 mm (.118) max. * Total travel : 1,8 mm (.070) +/- 0,3 mm * Typical operating force : 6N +/- 2N * Low level or mechanical life : 1.000.000 cycles * Torque : 0,7 Nm max. applied to nut * Soldering : 320C max. for 3 sec. ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : - Gold plated silver contacts (code 4) : 200mA 48VDC - Silver contacts (code 2) - screw terminals : 4A 48VDC * Electrical life at full load : 500.000 cycles * Initial contact resistance : 100 m max. * Insulation resistance : 1 G min. at 500VDC * Dielectric strength : 1.000 Vrms 50 Hz MATERIALS LED COMPONENT SPECIFICATIONS LED colour Forward current Super red (L0S) 20mA Typ. forward voltage Max. forward voltage 2,1V 2,3V Yellow (L0Y) 20mA 2,1V 2,3V Green (L0G) 20mA 2,1V 2,3V Blue (L0B) 20mA 3,2V 3,8V White (L0W) 20mA 3,35V 4,25V * Case : thermoplastic UL94-V0 * Plunger : polyamide * Bushing/bezel : polyamide * Contacts : 4 : silver, gold plated 2 : silver (screw terminals) * Multi-wire lead AWG20, section 0,6 mm2 * LED wire : AWG26, section 0,12 mm2 * Lens : polycarbonate * Terminal seal : epoxy (except screw terminals) A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage LED forward current On flying lead versions, the LED resistor can be integrated by APEM on request. PANEL CUT-OUT MATRIX MOUNTING 22.00 (.866) O16.10 (.118MAX) (.633DIA) 22.00 (.866) 3.00 Maxi Flat seal O16.10 (.633DIA) 1 15.10 (.594) 15.10 (.594) The company reserves the right to change specifications without notice. B1-58 www.apem.com APEM 11-Serie_IZ-plastic-F3-A_08-Serie IP-A 31/10/14 08:16 Page59 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - momentary Overview IZ Electrical function Model SERIES P Thermoplastic 3 Normally open (NO) Actuator shapes Round, curved Round, flat R P Actuator colours 1 B 2 3 4 5 6 7 8 9 A Blue Dark blue Black Green Grey Yellow Red White Bright chrome Orange Satin chrome Bushing & bezel finish 2 Black (standard) Terminals Solder lugs Flying leads Straight PC Quick-connect (non-illuminated) V Screw (non-illuminated) S F P Z 4 2 Silver, gold plated Silver (screw term.) B1 LED colours Blank L0S L0Y L0G L0B L0W Other : on request. Contacts Non-illum. Super red Yellow Green Blue White ABOUT THIS SERIES On the following pages, you will find successively : model structure of switches and options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Mounting accessories : Standard hardware supplied : 1 castellated black plastic nut U4249 and 1 silicone flat seal. Packaging unit : 25 pieces for flying lead models - 40 pieces for other models APEM www.apem.com B1-59 11-Serie_IZ-plastic-F3-A_08-Serie IP-A 31/10/14 08:16 Page60 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - momentary Illuminated * Five LED colours * Tin plated LED terminals * Gold plated contacts LED Cathode (-) LED Cathode (-) Function 3 (NO) Actuator marking available on IZPP models (symbol 10 mm max.). On request. O16.00x100SI (.630DIAx100IS) O20.00 (.787DIA) NO Also available with straight PC terminals : IZP*3P4. LED colour is indicated by the bottom of the switch. 2.00 (.078) 2.00 (.078) Flat Flying lead terminals - momentary NO O16.00x100SI (.630DIAx100IS) O20.00 (.787DIA) 4.00 (.157) O12.00 (.472DIA) Normally Open Normally Open 50010 (19.68.393) Flat actuator IZPP3F4 15.00/Plat (.590/Flat) 18.50maxi. (.728MAX. ) O15.00 (.590DIA) 4.50 (.177) Normally Open LED Cathode (-) Curved actuator IZPR3F4 8.70 (.342) 11.00 (.433) O15.00 (.590DIA) 2.00 (.078) Flat actuator IZPP3S4 Normally Open 15.00/Plat (.590/Flat) 8.70 (.342) Curved actuator IZPR3S4 4.00 (.157) O12.00 (.472DIA) 2.00 (.078) Flat Solder lug terminals 3.60 (.141) B1 MODEL STRUCTURE Wire colours : black : NO contact, red : LED anode(+), blue : LED cathode (-) ACTUATOR COLOURS 1 : blue - B : dark blue - 2 : black - 3 : green - 4 : grey - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange A : satin chrome BUSHING AND BEZEL COLOURS LED COLOURS 2 : black (standard) Other : on request. L0S : super red - L0Y : yellow - L0G : green L0B : blue - L0W : white B1-60 www.apem.com APEM 11-Serie_IZ-plastic-F3-A_08-Serie IP-A 31/10/14 08:16 Page61 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - momentary Non-illuminated Straight P Quick-connect Z 2.00X0.40 (.078X.015) Function 3 (NO) 2.40 (.094) 7.10 (.279) 3.60 (.141) 1.00 (.039) 3.60 (.141) 1.50 (.059) Solder lug S 1.00X0.40 (.039X.015) 1.20 (.047) 2.80X0.50 (.110X.019) MODEL STRUCTURE Actuator marking available on IZPP models (symbol 10 mm max.). On request. Flat Solder lug terminals - gold plated contacts O20.00 (.787DIA) Also available with straight PC terminals : IZP*3P4 and quick-connect terminals : IZP*3Z4. Sealed flying lead terminals - gold plated contacts 2.00 (.078) Flat O16.00x100SI (.630DIAx100IS) O20.00 (.787DIA) 15.00/Plat (.590/Flat) Normally Open 12.00maxi (.472MAX.) O15.00 (.590DIA) Normally Open 50010 (19.68.393) Flat actuator IZPP3F4 4.00 (.157) O12.00 (.472DIA) Curved actuator IZPR3F4 8.70 (.342) 11.00 (.433) O15.00 (.590DIA) 2.00 (.078) Normally Open 15.00/Plat (.590/Flat) 8.70 (.342) Flat actuator IZPP3S4 Normally Open 3.60 (.141) Curved actuator IZPR3S4 4.00 (.157) O12.00 (.472DIA) 2.00 (.078) O16.00x100SI (.630DIAx100IS) Normally open O15.00 (.590DIA) Normally open 7.00 Maxi (.275 MAX) Flat actuator IZPP3V2 4.00 (.157) Curved actuator IZPR3V2 15.00/Plat (.590/Flat) 8.70 (.342) O20.00 (.787DIA) O12.00 (.472DIA) 11.00 (.433) O16.00x100SI (.630DIAx100IS) 2.00 (.078) Flat Screw terminals - silver contacts Actuator colour and bushing/bezel colour : select the desired codes on previous page. APEM www.apem.com B1-61 B1 12-Serie_IZ-plastic-F1-A_08-Serie IP-A 31/10/14 08:15 Page62 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - latching Distinctive features and specifications UG1410A Rear mounting for easier installation Latching action models Sealed to IP67 Illuminated or non-illuminated Flat actuator for optional marking B1 ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS * Front panel sealing : IP67 according to IEC 60529 * Shock resistance : 100 g according to IEC 512-4, test 6c * Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d * Salt spray : IEC 512-6, test 11f * Operating temperature : -40C to +85C * Panel thickness : 3 mm (.118) max. * Total travel : 2,5 mm (.098) +/- 0,3 mm * Typical operating force : 5N +/- 2N * Low level or mechanical life : 200.000 cycles * Torque : 0,7 Nm max. applied to nut * Soldering : 320C max. for 3 sec. ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : 100mA 24VDC - 200.000 cycles * Initial contact resistance : 100 m max. * Insulation resistance : 1 G min. at 500VDC * Dielectric strength : 1.500 Vrms between terminals MATERIALS LED COMPONENT SPECIFICATIONS LED colour Forward current Super red (L0S) 20mA Typ. forward voltage Max. forward voltage 1,95V 1,95V Yellow (L0Y) 20mA 2V 2,05V Green (L0G) 20mA 2,1V 2,5V Blue (L0B) 20mA 3,2V 4V * Case : thermoplastic UL94-V0 * Plunger : polyamide * Bushing/bezel : polyamide * Contacts : silver, gold plated * Multi-wire lead AWG20, section 0,6 mm2 * LED wire : AWG26, section 0,12 mm2 * Lens : polycarbonate * Terminal seal : epoxy A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage LED forward current On flying lead versions, the LED resistor can be integrated by APEM on request. PANEL CUT-OUT MATRIX MOUNTING 22.00 (.866) O16.10 (.118MAX) (.633DIA) 22.00 (.866) 3.00 Maxi Flat seal O16.10 (.633DIA) 1 15.10 (.594) 15.10 (.594) The company reserves the right to change specifications without notice. B1-62 www.apem.com APEM 12-Serie_IZ-plastic-F1-A_08-Serie IP-A 31/10/14 08:15 Page63 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - latching Distinctive features and specifications IZ Electrical function Model SERIES P Thermoplastic 1 Terminals ON - OFF S F P Z Actuator shapes 1 B 2 3 4 5 6 7 8 9 A Blue Dark blue Black Green Grey Yellow Red White Bright chrome Orange Satin chrome 4 Silver, gold plated Round, curved Round, flat R P Actuator colours Solder lugs Flying leads Straight PC Quick-connect Contacts B1 Bushing & bezel finish 2 Black (standard) LED colours Blank L0S L0Y L0G L0B Other : on request. Non-illum. Super red Yellow Green Blue ABOUT THIS SERIES On the following pages, you will find successively : model structure of switches and options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Mounting accessories : Standard hardware supplied : 1 castellated black plastic nut U4249 and 1 silicone flat seal. Packaging unit : 25 pieces for flying lead models - 40 pieces for other models APEM www.apem.com B1-63 12-Serie_IZ-plastic-F1-A_08-Serie IP-A 31/10/14 08:15 Page64 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - latching Illuminated OFF 2.80 (.110) ON 8.40 (.330) 2.40 (.094) 4.20 (.165) 1.10X0.50 (.043X.019) 1.20 (.047) 2.80 (.110) MODEL STRUCTURE Actuator marking available on IZPP models (symbol 10 mm max.). On request. Flat O20.00 (.787DIA) 14.00 (.551) O15.00 (.590DIA) ON - OFF 0.50x0.60 (.019x.023) 5.08 (.200) Also available with straight PC terminals : IZP*1P4 and quick-connect terminals : IZP*1Z4. Flat Sealed flying lead terminals 3.20 (.125) Flat actuator IZPP1S4 O16.00x100SI (.630DIAx100IS) O20.00 (.787DIA) O12.00 (.472DIA) Curved actuator IZPR1F4 ON - OFF 15.00/Plat (.590/Flat) 20.00maxi. (.787MAX.) O15.00 (.590DIA) ON - OFF 50010 (19.68.393) Flat actuator IZPP1F4 15.00/Plat (.590/Flat) 8.70 (.342) ON - OFF 2.00 (.078) Curved actuator IZPR1S4 4.00 (.157) O12.00 (.472DIA) 2.00 (.078) O16.00x100SI (.630DIAx100IS) 8.70 (.342) Solder lug terminals 4.00 (.157) B1 (+) (-) Quick-connect Z 3.40 (.133) (+) 3.20 (.125) 1.40 (.055) (-) Straight P Solder lug S 2.30 (.090) * Four LED colours * Tin plated LED terminals * Gold plated contacts Wire colours : black : NO contact, red : LED anode(+), blue : LED cathode (-) ACTUATOR COLOURS 1 : blue - B : dark blue - 2 : black - 3 : green - 4 : grey - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange A : satin chrome BUSHING AND BEZEL COLOURS LED COLOURS 2 : black (standard) Other : on request. L0S : super red - L0Y : yellow - L0G : green L0B : blue B1-64 www.apem.com APEM 12-Serie_IZ-plastic-F1-A_08-Serie IP-A 31/10/14 08:15 Page65 IZ series Rear mounted sealed pushbutton switches - bushing O 16 mm - latching Non-illuminated * Gold plated contacts Straight P 2.80 (.110) 8.40 (.330) 2.40 (.094) 1.10X0.50 (.043X.019) 1.20 (.047) 3.40 (.133) ON 3.20 (.125) 1.40 (.055) OFF Quick-connect Z 4.20 (.165) 2.30 (.090) Solder lug S 2.80 (.110) MODEL STRUCTURE Actuator marking available on IZPP models (symbol 10 mm max.). On request. O16.00x100SI (.630DIAx100IS) O20.00 (.787DIA) O16.00x100SI (.630DIAx100IS) O20.00 (.787DIA) 4.00 (.157) O12.00 (.472DIA) ON - OFF O15.00 (.590DIA) ON - OFF 15.00/Plat (.590/Flat) 50010 (19.68.393) Flat actuator IZPP1F4 2.00 (.078) 5.08 (.200) Flat Sealed flying lead terminals 3.20 (.125) ON - OFF Also available with straight PC terminals : IZP*1P4 and quick-connect terminals : IZP*1Z4. Curved actuator IZPR1F4 8.70 (.342) 14.00 (.551) O15.00 (.590DIA) 8.70 (.342) Flat actuator IZPP1S4 ON - OFF 15.00/Plat (.590/Flat) 20.00 maxi (.787MAX.) Curved actuator IZPR1S4 4.00 (.157) O12.00 (.472DIA) 2.00 (.078) Flat Solder lug terminals ACTUATOR COLOURS 1 : blue - B : dark blue - 2 : black - 3 : green - 4 : grey - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange A : satin chrome BUSHING AND BEZEL COLOURS 2 : black (standard) Other : on request. APEM www.apem.com B1-65 B1