LM2931-N www.ti.com SNOSBE5G - MARCH 2000 - REVISED APRIL 2013 LM2931-N Series Low Dropout Regulators Check for Samples: LM2931-N FEATURES DESCRIPTION * * * * * * * * * * The LM2931-N positive voltage regulator features a very low quiescent current of 1mA or less when supplying 10mA loads. This unique characteristic and the extremely low input-output differential required for proper regulation (0.2V for output currents of 10mA) make the LM2931-N the ideal regulator for standby power systems. Applications include memory standby circuits, CMOS and other low power processor power supplies as well as systems demanding as much as 100mA of output current. 1 2 * Very Low Quiescent Current Output Current in Excess of 100 mA Input-output Differential Less than 0.6V Reverse Battery Protection 60V Load Dump Protection -50V Reverse Transient Protection Short Circuit Protection Internal Thermal Overload Protection Mirror-image Insertion Protection Available in TO-220, TO-92, TO-263, or SOIC-8 Packages Available as Adjustable with TTL Compatible Switch Designed originally for automotive applications, the LM2931-N and all regulated circuitry are protected from reverse battery installations or 2 battery jumps. During line transients, such as a load dump (60V) when the input voltage to the regulator can momentarily exceed the specified maximum operating voltage, the regulator will automatically shut down to protect both internal circuits and the load. The LM2931-N cannot be harmed by temporary mirror-image insertion. Familiar regulator features such as short circuit and thermal overload protection are also provided. The LM2931-N family includes a fixed 5V output (3.8% tolerance for A grade) or an adjustable output with ON/OFF pin. Both versions are available in a TO-220 power package, DDPAK/TO-263 surface mount package, and an 8-lead SOIC package. The fixed output version is also available in the TO-92 plastic package. Connection Diagrams FIXED VOLTAGE OUTPUT Figure 1. TO-220 3-Lead Power Package Front View Figure 2. DDPAK/TO-263 Surface-Mount Package Top View Figure 3. Side View 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2000-2013, Texas Instruments Incorporated LM2931-N SNOSBE5G - MARCH 2000 - REVISED APRIL 2013 www.ti.com *NC = Not internally connected. Must be electrically isolated from the rest of the circuit for the DSBGA package. Figure 4. 8-Pin SOIC Top View Figure 5. TO-92 Plastic Package Bottom View Figure 6. 6-Bump DSBGA Top View (Bump Side Down) Figure 7. DSBGA Laser Mark ADJUSTABLE OUTPUT VOLTAGE Figure 8. TO-220 5-Lead Power Package Front View Figure 9. DDPAK/TO-263 5-Lead Surface-Mount Package Top View 2 Submit Documentation Feedback Figure 10. Side View Copyright (c) 2000-2013, Texas Instruments Incorporated Product Folder Links: LM2931-N LM2931-N www.ti.com SNOSBE5G - MARCH 2000 - REVISED APRIL 2013 Figure 11. 8-Pin SOIC Top View Typical Applications *Required if regulator is located far from power supply filter. **C2 must be at least 100 F to maintain stability. May be increased without bound to maintain regulation during transients. Locate as close as possible to the regulator. This capacitor must be rated over the same operating temperature range as the regulator. The equivalent series resistance (ESR) of this capacitor is critical; see curve. Figure 12. LM2931-N Fixed Output Note: Using 27k for R1 will automatically compensate for errors in VOUT due to the input bias current of the ADJ pin (approximately 1 A). Figure 13. LM2931-N Adjustable Output Submit Documentation Feedback Copyright (c) 2000-2013, Texas Instruments Incorporated Product Folder Links: LM2931-N 3 LM2931-N SNOSBE5G - MARCH 2000 - REVISED APRIL 2013 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. ABSOLUTE MAXIMUM RATINGS (1) (2) Input Voltage Operating Range 26V Overvoltage Protection LM2931A, LM2931C (Adjustable) 60V LM2931-N 50V Internal Power Dissipation (3) (4) Internally Limited Operating Ambient Temperature -40C to +85C Range Maximum Junction Temperature 125C -65C to +150C Storage Temperature Range Lead Temp. (Soldering, 10 seconds) ESD Tolerance (1) (2) (3) (4) (5) 230C (5) 2000V Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Electrical specifications do not apply when operating the device beyond its rated operating conditions. If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and specifications. See circuit in Typical Applications. To ensure constant junction temperature, low duty cycle pulse testing is used. The maximum power dissipation is a function of maximum junction temperature TJmax, total thermal resistance JA, and ambient temperature TA. The maximum allowable power dissipation at any ambient temperature is PD = (TJmax - TA)/JA. If this dissipation is exceeded, the die temperature will rise above 150C and the LM2931-N will go into thermal shutdown. For the LM2931-N in the TO-92 package, JA is 195C/W; in the SOIC-8 package, JA is 160C/W, and in the TO-220 package, JA is 50C/W; in the DDPAK/TO-263 package, JA is 73C/W; and in the 6-Bump DSBGA package JA is 290C/W. If the TO-220 package is used with a heat sink, JA is the sum of the package thermal resistance junction-to-case of 3C/W and the thermal resistance added by the heat sink and thermal interface.If the TO-263 package is used, the thermal resistance can be reduced by increasing the P.C. board copper area thermally connected to the package: Using 0.5 square inches of copper area, JA is 50C/W; with 1 square inch of copper area, JA is 37C/W; and with 1.6 or more square inches of copper area, JA is 32C/W. Human body model, 100 pF discharged through 1.5 k. ELECTRICAL CHARACTERISTICS FOR FIXED 3.3V VERSION VIN = 14V, IO = 10mA, TJ = 25C, C2 = 100F (unless otherwise specified) (1) LM2931-N-3.3 Parameter Conditions Output Voltage Typ 3.3 4V VIN 26V, IO = 100 mA -40C TJ 125C Limit Units 3.465 3.135 VMAX VMIN 3.630 2.970 VMAX VMIN (2) Line Regulation 4V VIN 26V 4 33 mVMAX Load Regulation 5mA IO 100mA 10 50 mVMAX Output Impedance 100mADC and 10mArms, 100Hz - 10kHz 200 Quiescent Current IO 10mA, 4V VIN 26V 0.4 m 1.0 mAMAX -40C TJ 125C Output Noise Voltage IO = 100mA, VIN = 14V, TJ = 25C 15 10Hz -100kHz, COUT = 100F 330 Vrms 13 mV/1000 hr 80 dB Long Term Stability Ripple Rejection (1) (2) 4 fO = 120Hz mA See circuit in Typical Applications. To ensure constant junction temperature, low duty cycle pulse testing is used. All limits are specified for TJ = 25C (standard type face) or over the full operating junction temperature range of -40C to +125C (bold type face). Submit Documentation Feedback Copyright (c) 2000-2013, Texas Instruments Incorporated Product Folder Links: LM2931-N LM2931-N www.ti.com SNOSBE5G - MARCH 2000 - REVISED APRIL 2013 ELECTRICAL CHARACTERISTICS FOR FIXED 3.3V VERSION (continued) VIN = 14V, IO = 10mA, TJ = 25C, C2 = 100F (unless otherwise specified) (1) LM2931-N-3.3 Parameter Conditions Dropout Voltage Limit Units 0.05 0.30 0.2 0.6 VMAX Typ IO = 10mA IO = 100mA Maximum Operational Input Voltage (2) 33 26 VMIN Maximum Line Transient RL = 500, VO 5.5V, T = 1ms, 100ms 70 50 VMIN Reverse Polarity Input Voltage, DC VO -0.3V, RL = 500 -30 -15 VMIN Reverse Polarity Input Voltage, Transient T = 1ms, 100ms, RL = 500 -80 -50 VMIN ELECTRICAL CHARACTERISTICS FOR FIXED 5V VERSION VIN = 14V, IO = 10mA, TJ = 25C, C2 = 100 F (unless otherwise specified) (1) LM2931A-5.0 Parameter Conditions Output Voltage Typ 5 6.0V VIN 26V, IO = 100mA -40C TJ 125C Line Regulation 9V VIN 16V 6V VIN 26V Load Regulation Output Impedance Quiescent Current LM2931-N-5.0 Limit Limit Units 5.25 4.75 VMAX VMIN 5.5 4.5 VMAX VMIN 2 4 10 30 mVMAX 14 50 mVMAX (2) Typ 5.19 4.81 5 5.25 4.75 (2) 2 4 10 30 5 mA IO 100mA 14 50 100mADC and 10mArms, 100Hz -10kHz 200 IO 10mA, 6V VIN 26V 0.4 1.0 IO = 100mA, VIN = 14V, TJ = 25C 15 30 10Hz -100kHz, COUT = 100F 500 500 Vrms 20 20 mV/1000 hr 200 0.4 m 1.0 mAMAX -40C TJ 125C Output Noise Voltage Long Term Stability 15 mAMAX Ripple Rejection fO = 120 Hz 80 55 80 Dropout Voltage IO = 10mA IO = 100mA 0.05 0.3 0.2 0.6 0.05 0.3 0.2 0.6 VMAX 33 26 33 26 VMIN Maximum Operational Input Voltage dBMIN Maximum Line Transient RL = 500, VO 5.5V, T = 1ms, 100ms 70 60 70 50 VMIN Reverse Polarity Input Voltage, DC VO -0.3V, RL = 500 -30 -15 -30 -15 VMIN Reverse Polarity Input Voltage, Transient T = 1ms, 100ms, RL = 500 -80 -50 -80 -50 VMIN (1) (2) See circuit in Typical Applications. To ensure constant junction temperature, low duty cycle pulse testing is used. All limits are specified for TJ = 25C (standard type face) or over the full operating junction temperature range of -40C to +125C (bold type face). Submit Documentation Feedback Copyright (c) 2000-2013, Texas Instruments Incorporated Product Folder Links: LM2931-N 5 LM2931-N SNOSBE5G - MARCH 2000 - REVISED APRIL 2013 www.ti.com ELECTRICAL CHARACTERISTICS FOR ADJUSTABLE VERSION VIN = 14V, VOUT = 3V, IO = 10 mA, TJ = 25C, R1 = 27k, C2 = 100 F (unless otherwise specified) Parameter Conditions Reference Voltage (1) Typ Limit Units Limit 1.20 1.26 VMAX 1.14 VMIN IO 100 mA, -40C Tj 125C, R1 = 27k 1.32 VMAX Measured from VOUT to Adjust Pin 1.08 VMIN 24 VMAX Output Voltage Range 3 VMIN mV/VMAX Line Regulation VOUT + 0.6V VIN 26V 0.2 1.5 Load Regulation 5 mA IO 100 mA 0.3 1 Output Impedance 100 mADC and 10 mArms, 100 Hz-10 kHz 40 Quiescent Current IO = 10 mA 0.4 Output Noise Voltage %MAX m/V 1 mAMAX 1 mAMAX IO = 100 mA 15 During Shutdown RL = 500 0.8 10 Hz-100 kHz 100 Vrms/V 0.4 %/1000 hr Long Term Stability mA Ripple Rejection fO = 120 Hz 0.02 Dropout Voltage IO 10 mA 0.05 0.2 VMAX %/V IO = 100 mA 0.3 0.6 VMAX 33 26 VMIN 70 60 VMIN -30 -15 VMIN -80 -50 VMIN On 2.0 1.2 VMAX Off 2.2 3.25 VMIN 20 50 AMAX Maximum Operational Input Voltage Maximum Line Transient IO = 10 mA, Reference Voltage 1.5V T = 1 ms, 100 ms Reverse Polarity Input VO -0.3V, RL = 500 Voltage, DC Reverse Polarity Input T = 1 ms, 100 ms, RL = 500 Voltage, Transient On/Off Threshold Voltage VO=3V On/Off Threshold Current (1) 6 See circuit in Typical Applications. To ensure constant junction temperature, low duty cycle pulse testing is used. Submit Documentation Feedback Copyright (c) 2000-2013, Texas Instruments Incorporated Product Folder Links: LM2931-N LM2931-N www.ti.com SNOSBE5G - MARCH 2000 - REVISED APRIL 2013 TYPICAL PERFORMANCE CHARACTERISTICS Dropout Voltage Dropout Voltage Figure 14. Figure 15. Low Voltage Behavior Output at Voltage Extremes Figure 16. Figure 17. Line Transient Response Load Transient Response Figure 18. Figure 19. Submit Documentation Feedback Copyright (c) 2000-2013, Texas Instruments Incorporated Product Folder Links: LM2931-N 7 LM2931-N SNOSBE5G - MARCH 2000 - REVISED APRIL 2013 www.ti.com TYPICAL PERFORMANCE CHARACTERISTICS (continued) 8 Peak Output Current Quiescent Current Figure 20. Figure 21. Quiescent Current Quiescent Current Figure 22. Figure 23. Ripple Rejection Ripple Rejection Figure 24. Figure 25. Submit Documentation Feedback Copyright (c) 2000-2013, Texas Instruments Incorporated Product Folder Links: LM2931-N LM2931-N www.ti.com SNOSBE5G - MARCH 2000 - REVISED APRIL 2013 TYPICAL PERFORMANCE CHARACTERISTICS (continued) Output Impedance Operation During Load Dump Figure 26. Figure 27. Reference Voltage Maximum Power Dissipation (SOIC-8) Figure 28. Figure 29. Maximum Power Dissipation (TO-220) Maximum Power Dissipation (TO-92) Figure 30. Figure 31. Submit Documentation Feedback Copyright (c) 2000-2013, Texas Instruments Incorporated Product Folder Links: LM2931-N 9 LM2931-N SNOSBE5G - MARCH 2000 - REVISED APRIL 2013 www.ti.com TYPICAL PERFORMANCE CHARACTERISTICS (continued) Maximum Power Dissipation (TO-263) (1) On/Off Threshold Figure 32. Figure 33. Output Capacitor ESR Figure 34. (1) 10 The maximum power dissipation is a function of maximum junction temperature TJmax, total thermal resistance JA, and ambient temperature TA. The maximum allowable power dissipation at any ambient temperature is PD = (TJmax - TA)/JA. If this dissipation is exceeded, the die temperature will rise above 150C and the LM2931-N will go into thermal shutdown. For the LM2931-N in the TO-92 package, JA is 195C/W; in the SOIC-8 package, JA is 160C/W, and in the TO-220 package, JA is 50C/W; in the DDPAK/TO-263 package, JA is 73C/W; and in the 6-Bump DSBGA package JA is 290C/W. If the TO-220 package is used with a heat sink, JA is the sum of the package thermal resistance junction-to-case of 3C/W and the thermal resistance added by the heat sink and thermal interface.If the TO-263 package is used, the thermal resistance can be reduced by increasing the P.C. board copper area thermally connected to the package: Using 0.5 square inches of copper area, JA is 50C/W; with 1 square inch of copper area, JA is 37C/W; and with 1.6 or more square inches of copper area, JA is 32C/W. Submit Documentation Feedback Copyright (c) 2000-2013, Texas Instruments Incorporated Product Folder Links: LM2931-N LM2931-N www.ti.com SNOSBE5G - MARCH 2000 - REVISED APRIL 2013 SCHEMATIC DIAGRAM Submit Documentation Feedback Copyright (c) 2000-2013, Texas Instruments Incorporated Product Folder Links: LM2931-N 11 LM2931-N SNOSBE5G - MARCH 2000 - REVISED APRIL 2013 www.ti.com APPLICATION HINTS One of the distinguishing factors of the LM2931-N series regulators is the requirement of an output capacitor for device stability. The value required varies greatly depending upon the application circuit and other factors. Thus some comments on the characteristics of both capacitors and the regulator are in order. High frequency characteristics of electrolytic capacitors depend greatly on the type and even the manufacturer. As a result, a value of capacitance that works well with the LM2931-N for one brand or type may not necessary be sufficient with an electrolytic of different origin. Sometimes actual bench testing, as described later, will be the only means to determine the proper capacitor type and value. Experience has shown that, as a rule of thumb, the more expensive and higher quality electrolytics generally allow a smaller value for regulator stability. As an example, while a high-quality 100 F aluminum electrolytic covers all general application circuits, similar stability can be obtained with a tantalum electrolytic of only 47F. This factor of two can generally be applied to any special application circuit also. Another critical characteristic of electrolytics is their performance over temperature. While the LM2931-N is designed to operate to -40C, the same is not always true with all electrolytics (hot is generally not a problem). The electrolyte in many aluminum types will freeze around -30C, reducing their effective value to zero. Since the capacitance is needed for regulator stability, the natural result is oscillation (and lots of it) at the regulator output. For all application circuits where cold operation is necessary, the output capacitor must be rated to operate at the minimum temperature. By coincidence, worst-case stability for the LM2931-N also occurs at minimum temperatures. As a result, in applications where the regulator junction temperature will never be less than 25C, the output capacitor can be reduced approximately by a factor of two over the value needed for the entire temperature range. To continue our example with the tantalum electrolytic, a value of only 22F would probably thus suffice. For high-quality aluminum, 47F would be adequate in such an application. Another regulator characteristic that is noteworthy is that stability decreases with higher output currents. This sensible fact has important connotations. In many applications, the LM2931-N is operated at only a few milliamps of output current or less. In such a circuit, the output capacitor can be further reduced in value. As a rough estimation, a circuit that is required to deliver a maximum of 10mA of output current from the regulator would need an output capacitor of only half the value compared to the same regulator required to deliver the full output current of 100mA. If the example of the tantalum capacitor in the circuit rated at 25C junction temperature and above were continued to include a maximum of 10mA of output current, then the 22F output capacitor could be reduced to only 10F. In the case of the LM2931CT adjustable regulator, the minimum value of output capacitance is a function of the output voltage. As a general rule, the value decreases with higher output voltages, since internal loop gain is reduced. At this point, the procedure for bench testing the minimum value of an output capacitor in a special application circuit should be clear. Since worst-case occurs at minimum operating temperatures and maximum operating currents, the entire circuit, including the electrolytic, should be cooled to the minimum temperature. The input voltage to the regulator should be maintained at 0.6V above the output to keep internal power dissipation and die heating to a minimum. Worst-case occurs just after input power is applied and before the die has had a chance to heat up. Once the minimum value of capacitance has been found for the brand and type of electrolytic in question, the value should be doubled for actual use to account for production variations both in the capacitor and the regulator. (All the values in this section and the remainder of the data sheet were determined in this fashion.) LM2931-N DSBGA Light Sensitivity When the LM2931-N DSBGA package is exposed to bright sunlight, normal office fluorescent light, and other LED's, it operates within the limits specified in the electrical characteristic table. 12 Submit Documentation Feedback Copyright (c) 2000-2013, Texas Instruments Incorporated Product Folder Links: LM2931-N LM2931-N www.ti.com SNOSBE5G - MARCH 2000 - REVISED APRIL 2013 Definition of Terms Dropout Voltage: The input-output voltage differential at which the circuit ceases to regulate against further reduction in input voltage. Measured when the output voltage has dropped 100 mV from the nominal value obtained at 14V input, dropout voltage is dependent upon load current and junction temperature. Input Voltage: The DC voltage applied to the input terminals with respect to ground. Input-Output Differential: The voltage difference between the unregulated input voltage and the regulated output voltage for which the regulator will operate. Line Regulation: The change in output voltage for a change in the input voltage. The measurement is made under conditions of low dissipation or by using pulse techniques such that the average chip temperature is not significantly affected. Load Regulation: The change in output voltage for a change in load current at constant chip temperature. Long Term Stability: Output voltage stability under accelerated life-test conditions after 1000 hours with maximum rated voltage and junction temperature. Output Noise Voltage: The rms AC voltage at the output, with constant load and no input ripple, measured over a specified frequency range. Quiescent Current: That part of the positive input current that does not contribute to the positive load current. The regulator ground lead current. Ripple Rejection: The ratio of the peak-to-peak input ripple voltage to the peak-to-peak output ripple voltage at a specified frequency. Temperature Stability of VO: The percentage change in output voltage for a thermal variation from room temperature to either temperature extreme. Submit Documentation Feedback Copyright (c) 2000-2013, Texas Instruments Incorporated Product Folder Links: LM2931-N 13 LM2931-N SNOSBE5G - MARCH 2000 - REVISED APRIL 2013 www.ti.com REVISION HISTORY Changes from Revision F (April 2013) to Revision G * 14 Page Changed layout of National Data Sheet to TI format .......................................................................................................... 13 Submit Documentation Feedback Copyright (c) 2000-2013, Texas Instruments Incorporated Product Folder Links: LM2931-N PACKAGE OPTION ADDENDUM www.ti.com 23-Aug-2017 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LM2931AM-5.0 NRND SOIC D 8 95 TBD Call TI Call TI -40 to 85 2931A M-5.0 LM2931AM-5.0/NOPB ACTIVE SOIC D 8 95 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 2931A M-5.0 LM2931AMX-5.0/NOPB ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 2931A M-5.0 LM2931AS-5.0 NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI -40 to 85 LM2931 AS5.0 LM2931AS-5.0/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR -40 to 85 LM2931 AS5.0 LM2931ASX-5.0 NRND DDPAK/ TO-263 KTT 3 500 TBD Call TI Call TI -40 to 85 LM2931 AS5.0 LM2931ASX-5.0/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR -40 to 85 LM2931 AS5.0 LM2931AT-5.0 NRND TO-220 NDE 3 45 TBD Call TI Call TI -40 to 85 LM2931 AT5.0 LM2931AT-5.0/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM -40 to 85 LM2931 AT5.0 LM2931AZ-5.0/LFT1 ACTIVE TO-92 LP 3 2000 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type -40 to 85 LM293 1AZ-5 LM2931AZ-5.0/LFT3 ACTIVE TO-92 LP 3 2000 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type -40 to 85 LM293 1AZ-5 LM2931AZ-5.0/LFT4 ACTIVE TO-92 LP 3 2000 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type -40 to 85 LM293 1AZ-5 LM2931AZ-5.0/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type -40 to 85 LM293 1AZ-5 LM2931CM NRND SOIC D 8 95 TBD Call TI Call TI -40 to 85 LM29 31CM LM2931CM/NOPB ACTIVE SOIC D 8 95 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 LM29 31CM LM2931CMX NRND SOIC D 8 2500 TBD Call TI Call TI -40 to 85 LM29 31CM LM2931CMX/NOPB ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 LM29 31CM Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 23-Aug-2017 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LM2931CS NRND DDPAK/ TO-263 KTT 5 45 TBD Call TI Call TI -40 to 85 LM2931CS LM2931CS/NOPB ACTIVE DDPAK/ TO-263 KTT 5 45 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR -40 to 85 LM2931CS LM2931CT/NOPB ACTIVE TO-220 KC 5 45 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM -40 to 85 LM2931CT LM2931M-5.0 NRND SOIC D 8 95 TBD Call TI Call TI -40 to 85 2931 M-5.0 LM2931M-5.0/NOPB ACTIVE SOIC D 8 95 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 2931 M-5.0 LM2931MX-5.0 NRND SOIC D 8 2500 TBD Call TI Call TI -40 to 85 2931 M-5.0 LM2931MX-5.0/NOPB ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 2931 M-5.0 LM2931S-5.0/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Pb-Free (RoHS Exempt) CU SN Level-3-245C-168 HR -40 to 85 LM2931S 5.0 LM2931T-5.0/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM -40 to 85 LM2931T 5.0 LM2931Z-5.0/LFT2 ACTIVE TO-92 LP 3 2000 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type -40 to 85 LM293 1Z-5 LM2931Z-5.0/NOPB ACTIVE TO-92 LP 3 1800 Green (RoHS & no Sb/Br) CU SN N / A for Pkg Type -40 to 85 LM293 1Z-5 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com (4) 23-Aug-2017 There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 2-Sep-2015 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LM2931AMX-5.0/NOPB SOIC D 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 Q1 LM2931ASX-5.0 DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LM2931ASX-5.0/NOPB DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LM2931CMX SOIC D 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 Q1 LM2931CMX/NOPB SOIC D 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 Q1 LM2931MX-5.0 SOIC D 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 Q1 LM2931MX-5.0/NOPB SOIC D 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 2-Sep-2015 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM2931AMX-5.0/NOPB SOIC D 8 2500 367.0 367.0 35.0 LM2931ASX-5.0 DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LM2931ASX-5.0/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LM2931CMX SOIC D 8 2500 367.0 367.0 35.0 LM2931CMX/NOPB SOIC D 8 2500 367.0 367.0 35.0 LM2931MX-5.0 SOIC D 8 2500 367.0 367.0 35.0 LM2931MX-5.0/NOPB SOIC D 8 2500 367.0 367.0 35.0 Pack Materials-Page 2 MECHANICAL DATA NDE0003B www.ti.com MECHANICAL DATA KTT0003B TS3B (Rev F) BOTTOM SIDE OF PACKAGE www.ti.com PACKAGE OUTLINE KC0005A TO-220 - 16.51 mm max height SCALE 0.850 TO-220 4.83 4.06 10.67 9.65 3.05 2.54 B 1.40 1.14 A 6.86 5.69 3.71-3.96 8.89 6.86 (6.275) 12.88 10.08 OPTIONAL CHAMFER 16.51 MAX 2X (R1) OPTIONAL 9.25 7.67 C (4.25) PIN 1 ID (OPTIONAL) NOTE 3 14.73 12.29 1 5X 0.25 5 0.61 0.30 1.02 0.64 C A B 3.05 2.03 4X 1.7 6.8 1 5 4215009/A 01/2017 NOTES: 1. All controlling linear dimensions are in inches. Dimensions in brackets are in millimeters. Any dimension in brackets or parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. Shape may vary per different assembly sites. www.ti.com EXAMPLE BOARD LAYOUT KC0005A TO-220 - 16.51 mm max height TO-220 4X (1.45) PKG 0.07 MAX ALL AROUND 0.07 MAX ALL AROUND METAL TYP (1.45) PKG (2) 4X (2) 1 (R0.05) TYP 5X ( 1.2) SOLDER MASK OPENING, TYP (1.7) TYP 5 FULL R TYP (6.8) LAND PATTERN NON-SOLDER MASK DEFINED SCALE:12X 4215009/A 01/2017 www.ti.com MECHANICAL DATA KTT0005B TS5B (Rev D) BOTTOM SIDE OF PACKAGE www.ti.com MECHANICAL DATA NEB0005F www.ti.com PACKAGE OUTLINE LP0003A TO-92 - 5.34 mm max height SCALE 1.200 SCALE 1.200 TO-92 5.21 4.44 EJECTOR PIN OPTIONAL 5.34 4.32 (1.5) TYP SEATING PLANE (2.54) NOTE 3 2X 4 MAX (0.51) TYP 6X 0.076 MAX SEATING PLANE 2X 2.6 0.2 3X 12.7 MIN 3X 3X 0.55 0.38 0.43 0.35 2X 1.27 0.13 FORMED LEAD OPTION STRAIGHT LEAD OPTION OTHER DIMENSIONS IDENTICAL TO STRAIGHT LEAD OPTION 3X 2.67 2.03 4.19 3.17 3 2 1 3.43 MIN 4215214/B 04/2017 NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. Lead dimensions are not controlled within this area. 4. Reference JEDEC TO-226, variation AA. 5. Shipping method: a. Straight lead option available in bulk pack only. b. Formed lead option available in tape and reel or ammo pack. c. Specific products can be offered in limited combinations of shipping medium and lead options. d. Consult product folder for more information on available options. www.ti.com EXAMPLE BOARD LAYOUT LP0003A TO-92 - 5.34 mm max height TO-92 0.05 MAX ALL AROUND TYP FULL R TYP METAL TYP (1.07) 3X ( 0.85) HOLE 2X METAL (1.5) 2X (1.5) 2 1 (R0.05) TYP 3 2X (1.07) (1.27) SOLDER MASK OPENING 2X SOLDER MASK OPENING (2.54) LAND PATTERN EXAMPLE STRAIGHT LEAD OPTION NON-SOLDER MASK DEFINED SCALE:15X 0.05 MAX ALL AROUND TYP ( 1.4) 2X ( 1.4) METAL 3X ( 0.9) HOLE METAL (R0.05) TYP 2 1 (2.6) SOLDER MASK OPENING 3 2X SOLDER MASK OPENING (5.2) LAND PATTERN EXAMPLE FORMED LEAD OPTION NON-SOLDER MASK DEFINED SCALE:15X 4215214/B 04/2017 www.ti.com TAPE SPECIFICATIONS LP0003A TO-92 - 5.34 mm max height TO-92 13.7 11.7 32 23 (2.5) TYP 0.5 MIN 16.5 15.5 11.0 8.5 9.75 8.50 19.0 17.5 6.75 5.95 2.9 TYP 2.4 3.7-4.3 TYP 13.0 12.4 FOR FORMED LEAD OPTION PACKAGE 4215214/B 04/2017 www.ti.com IMPORTANT NOTICE Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. TI's published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and services. Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyers and others who are developing systems that incorporate TI products (collectively, "Designers") understand and agree that Designers remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products used in or for Designers' applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will thoroughly test such applications and the functionality of such TI products as used in such applications. TI's provision of technical, application or other design advice, quality characterization, reliability data or other services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, "TI Resources") are intended to assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any way, Designer (individually or, if Designer is acting on behalf of a company, Designer's company) agrees to use any particular TI Resource solely for this purpose and subject to the terms of this Notice. TI's provision of TI Resources does not expand or otherwise alter TI's applicable published warranties or warranty disclaimers for TI products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections, enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically described in the published documentation for a particular TI Resource. Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. TI RESOURCES ARE PROVIDED "AS IS" AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM, INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949 and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements. Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use. Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S. TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product). Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications and that proper product selection is at Designers' own risk. Designers are solely responsible for compliance with all legal and regulatory requirements in connection with such selection. Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer's noncompliance with the terms and provisions of this Notice. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2017, Texas Instruments Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: LM2931AM-5.0 LM2931AM-5.0/NOPB LM2931AMX-5.0 LM2931AMX-5.0/NOPB LM2931AS-5.0 LM2931AS5.0/NOPB LM2931ASX-5.0 LM2931ASX-5.0/NOPB LM2931AT-5.0 LM2931AT-5.0/NOPB LM2931AZ-5.0/LFT1 LM2931AZ-5.0/LFT3 LM2931AZ-5.0/LFT4 LM2931AZ-5.0/NOPB LM2931CM LM2931CM/NOPB LM2931CMX LM2931CMX/NOPB LM2931CS LM2931CS/NOPB LM2931CT LM2931CT/LF03 LM2931CT/LF04 LM2931CT/NOPB LM2931M-5.0 LM2931M-5.0/NOPB LM2931MX-5.0 LM2931MX-5.0/NOPB LM2931S-5.0 LM2931S-5.0/NOPB LM2931T-5.0 LM2931T-5.0/NOPB LM2931Z-5.0/LFT1 LM2931Z-5.0/NOPB LM2931Z-5.0/LFT2