Ultra minimum package size, SSOP (1 From A) 4-pin type. Lower output capacitance (C type) and on resistance (R type). (C R10) UL C-UL pending pending RF PhotoMOS (AQY2212V) FEATURES 4.45 .175 1.80 .071 2.65 .104 mm inch 1 4 2 3 1. Reduced package size Lower surface has been reduced 60% and mounting space 40% compared to conventional 4-pin SOP type. 2. Two types are available: A type with greatly reduced ON resistance, and a type with even lower output capacitance between terminals. AQY221R2V (R Type) AQY221N2V (C Type) 12.5pF 1.0pF 0.75 9.5 Output capacitance (C) ON resistance (R) 3. Mounting space has been reduced and output signals have been improved by using new flat lead terminals. Conventional SOP type 4. High speed switching (Part No.: AQY221N2V) Turn on time: 0.02ms Turn off time: 0.02ms TYPICAL APPLICATIONS Measuring and testing equipment 1. Test equipment IC tester, Liquid crystal driver tester, semiconductor performance tester 2. Board tester Bare board tester, In-circuit tester, function tester 3. Medical equipment Ultrasonic wave diagnostic machine 4. Multi-point recorder Strainmeter, thermo couple SSOP Flat lead TYPES Type AC/DC Low on resistance (R Type) type Low capacitance (C Type) Output rating* Load voltage Load current 40 V 250 mA 40 V 120 mA Part No. (Tape and reel packing style) Picked from the 1/4-pin side Picked from the 2/3-pin side AQY221R2VY AQY221R2VW AQY221N2VY AQY221N2VW Packing quantity Tape and reel: 3,500 pcs. * Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. (2) For space reasons, the initial letters of the product number "AQY", the package type indicator "Y" and "W" are omitted from the seal. (Ex. the label for product number AQY221N2V is 221N2) RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage (peak AC) Continuous load current (peak AC) Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature Operating limits Storage Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg AQY221R2V AQY221N2V 50mA 5V 1A 75mW 40V 0.25A 0.75A Remarks f=100 Hz, Duty factor=0.1% 0.12A 0.3A 250mW 300mW 1,500V AC -40C to +85C -40F to +185F -40C to +100C -40F to +212F See "CAUTIONS FOR USE" on page 6 Peak AC, DC 100 ms (1 shot), VL= DC Non-condensing at low temperatures 127 RF PhotoMOS (AQY2212V) 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol Typical Maximum Minimum LED operate current LED turn off current Input VF 1.0 mA C type (IL = 80 mA) R type (IL = 250 mA) 0.1 mA 0.2 mA 0.8 mA 0.9 mA 1.35 V (1.14 V at IF = 5 mA) C type (IL = 80 mA) R type (IL = 250 mA) C type (IF = 50 mA) R type (IF = 50 mA) 1.5 V Typical 0.75 9.5 1.25 12.5 12.5 pF 1.0 pF C type (IF = 5 mA, IL = 80 mA Within 1 s on time) R type (IF = 5 mA, IL = 250 mA Within 1 s on time) IF = 0 mA VB = 0 V f = 1 MHz Ron Maximum Output Condition*2 3.0 mA IFoff On resistance AQY221N2V 0.9 mA IFon Typical Typical Maximum LED dropout voltage AQY221R2V Typical Output capacitance Maximum 18 pF 1.5 pF Off state leakage current Typical Maximum ILeak 0.02 nA 0.01 nA C type (IF = 0 mA, VL = Max.) R type (IF = 0 mA, VL = Max.) Typical Turn on time*1 Maximum 0.02 ms Ton Typical Turn off time*1 Maximum Toff C type (IF = 5 mA, VL = 10 V RL = 125) R type (IF = 5 mA, VL = 10 V RL = 40) C type (IF = 5 mA, VL = 10 V RL = 125) R type (IF = 5 mA, VL = 10 V RL = 40) Typical Maximum Ciso 0.8 pF 1.5 pF Initial I/O isolation Minimum resistance Riso 1,000M Switching speed Transfer characteristics Cout I/O capacitance 10 nA 0.10 ms 0.5ms 0.08 ms 0.02 ms 0.2 ms C type (f = 1 MHz, VB = 0 V) R type (f = 1 MHz, VB = 0 V) 500V DC Notes: 1. For type of connection, see Page 34 2. Variation possible through combinations of output capacitance and ON resistance. *1 Turn on/Turn off time Input 90% 10% Output Ton Toff For Dimensions, see Page 30. For Schematic and Wiring Diagrams, see Page 34. For Cautions for Use, see Page 38. *2 Low on resistance (R type) Low capacitance (C type) REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. Load current vs. Load voltage characteristics Ambient temperature: 25C 77F Allowable ambient temperature: -40C to +85C -40F to +185F 3. On resistance vs. ambient temperature characteristics Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: Max. (DC); Load current: 250mA (DC) R type, 80mA (DC) C type 280 400 25 AQY221R2V AQY221R2V 200 120 100 On resistance, Load current, mA Load current, mA 240 300 200 160 AQY221N2V 120 20 AQY221N2V 15 10 AQY221N2V 80 5 40 AQY221R2V 0 -10 -20 0 20 40 60 8085 100 Ambient temperature, C 128 0 0 10 20 30 40 Load voltage, V 50 0 -40 -20 0 20 40 60 8085 Ambient temperature, C RF PhotoMOS (AQY2212V) 5. Turn off time vs. ambient temperature characteristics 6. LED operate current vs. ambient temperature characteristics Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: 10V (DC); Continuous load current: 250mA (DC) R type, 80mA (DC) C type Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: 10V (DC); Continuous load current: 250mA (DC) R type, 80mA (DC) C type Measured portion: between terminals 3 and 4; Load voltage: Max. (DC); Continuous load current: 250mA (DC) R type, 80mA (DC) C type 0.3 0.25 0.25 0.2 AQY221R2V 0.15 5 0.2 0.15 0.1 0.1 AQY221N2V 0.05 AQY221R2V LED operate current, mA 0.3 Turn off time, ms Turn on time, ms 4. Turn on time vs. ambient temperature characteristics 4 3 2 AQY221N2V 1 0.05 AQY221R2V AQY221N2V 0 -40 -20 0 20 40 0 80 85 60 -40 -20 0 20 40 0 80 85 60 -40 -20 0 20 40 60 8085 Ambient temperature, C Ambient temperature, C Ambient temperature, C 7. LED turn off current vs. ambient temperature characteristics 8. LED dropout voltage vs. ambient temperature characteristics 9. Current vs. voltage characteristics of output at MOS portion Measured portion: between terminals 3 and 4; Load voltage: Max. (DC); Continuous load current: 250mA (DC) R type, 80mA (DC) C type LED current: 5 to 50 mA Measured portion: between terminals 3 and 4 Ambient temperature: 25C 77F 3 2 AQY221N2V 1 Current, mA 4 LED dropout voltage, V LED turn off current, mA 300 1.5 5 1.4 AQY221N2V 100 1.3 -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 50mA 1.2 1.1 AQY221R2V AQY221R2V 200 0.5 1.0 1.5 2.0 2.5 3.0 Voltage, V 30mA 20mA -100 10mA -200 5mA 0 -40 -20 0 20 40 60 1.0 8085 -40 -20 Ambient temperature, C 0 20 40 60 -300 8085 100 Ambient temperature, C 10. Off state leakage current vs. load voltage characteristics 11. Turn on time vs. LED forward current characteristics 12. Turn off time vs. LED forward current characteristics Measured portion: between terminals 3 and 4 Ambient temperature: 25C 77F Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 250mA (DC) R type, 80mA (DC) C type; Ambient temperature: 25C 77F Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 250mA (DC) R type, 80mA (DC) C type; Ambient temperature: 25C 77F 0.5 10-6 10-9 0.5 0.4 Turn off time, s Turn on time, s Off state leakage current, A 10-3 AQY221R2V 0.3 AQY221N2V 0.2 0.4 0.3 0.2 AQY221R2V 10-12 0 AQY221R2V AQY221N2V 0.1 0.1 0 0 AQY221N2V 10 20 30 40 Load voltage, V 50 0 10 50 20 30 40 LED forward current, mA 60 0 10 50 20 30 40 LED forward current, mA 60 129 RF PhotoMOS (AQY2212V) 13. Output capacitance vs. applied voltage characteristics 14. Isolation vs. frequency characteristics (50 impedance) 15. Insertion loss vs. frequency characteristics (50 impedance) Measured portion: between terminals 3 and 4 Frequency: 1 MHz, 30m Vrms; Ambient temperature: 25C 77F Measured portion: between terminals 3 and 4 Ambient temperature: 25C 77F Measured portion: between terminals 3 and 4 Ambient temperature: 25C 77F 2 100 25 20 15 Insertion loss, dB 80 Isolation, dB Output capacitance, pF 30 60 AQY221N2V 40 1.5 1 AQY221N2V 10 0.5 20 AQY221R2V 5 AQY221R2V AQY221R2V AQY221N2V 0 0 10 20 30 40 0 4 10 50 10 5 10 Applied voltage, V 6 10 7 10 0 8 10 4 105 10 6 10 7 Frequency, Hz Frequency, Hz 16-(1). On resistance distribution (R type) 16-(2). On resistance distribution (C type) 17-(1). Turn on time distribution (R type) Measured portion: between terminals 3 and 4 Continuous load current: 250mA (DC) Ambient temperature: 25C 77F Measured portion: between terminals 3 and 4 Continuous load current: 80mA (DC) Ambient temperature: 25C 77F Load voltage: 10V (DC) Continuous load current: 250mA (DC) Ambient temperature: 25C 77F 40 35 35 30 25 20 15 25 Quantity, n Quantity, n Quantity, n 30 20 20 10 15 15 10 10 0 5 5 5 0.5 0.6 0.7 0.8 0.9 0 1 8.6 9 9.4 On resistance, 9.8 0 10.2 0 0.04 On resistance, 0.08 0.12 0.16 18-(1). Turn off time distribution (R type) 18-(2). Turn off time distribution (C type) Load voltage: 10V (DC) Continuous load current: 250mA (DC) Ambient temperature: 25C 77F Load voltage: 10V (DC) Continuous load current: 80mA (DC) Ambient temperature: 25C 77F 40 40 30 60 50 Quantity, n 50 Quantity, n Quantity, n 17-(2). Turn on time distribution (C type) Load voltage: 10V (DC) Continuous load current: 80mA (DC) Ambient temperature: 25C 77F 50 30 20 20 10 10 0.2 Turn on time, ms 40 30 20 0 0 0.02 0.04 0.06 0.08 0 0.1 10 0 0.04 0.08 0.12 0.16 0.2 19-(1). LED operate current distribution (R type) 19-(2). LED operate current distribution (C type) Load voltage: 10V (DC) Continuous load current: 250mA (DC) Ambient temperature: 25C 77F Load voltage: 10V (DC) Continuous load current: 80mA (DC) Ambient temperature: 25C 77F 25 20 20 Quantity, n Quantity, n 15 15 10 10 5 5 0 0.4 0.6 0.8 1 1.2 LED operate current, mA 130 1.4 0 0.4 0.6 0.8 1 1.2 1.4 0 0.02 0.04 0.06 0.08 Turn off time, ms Turn off time, ms Turn on time, ms 0 1.6 LED operate current, mA 1.8 0.1