MCC TM Micro Commercial Components ES1A-L THRU ES1J-L omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features * Lead Compliant(Note 1) ("P" Suffix designates Free Finish/RoHS RoHS Compliant. See ordering information) * Epoxy meets UL 94 V-0 flammability rating * Moisture Sensitivity Level 1 * Built-in strain relief * Super fast switching speed under 35ns * Marking : Cathode band and type number (No '-L' Suffix) * Halogen free available upon request by adding suffix "-HF" Maximum Ratings * * 1 Amp Super Fast Recovery Rectifier 50 to 600 Volts DO-214AC (SMA) (LEAD FRAME) Operating Temperature: -65 to +175 Storage Temperature: -65 to +175 H MCC Part Number ES1A-L ES1B-L ES1D-L ES1G-L ES1J-L Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V Maximum RMS Voltage Maximum DC Blocking Voltage J 35V 70V 140V 280V 420V 50V 100V 200V 400V 600V A Electrical Characteristics @ 25C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage ES1A-L-ES1D-L ES1G-L ES1J-L Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time Typical Junction Capacitance IF(AV) 1.0A TL= 125 IFSM 30A 8.3ms, half sine E C D B F G VF .95V 1.25V 1.70V IFM = 1.0A; IR 5A 80A TA = 25 TA = 100 Trr 35ns CJ 15pF IF=0.5A, IR=1.0A, Irr=0.25A Measured at 1.0MHz, VR=4.0V DIMENSIONS DIM A B C D E F G H J INCHES MIN .079 .050 .002 --.030 .065 .189 .157 .090 MM MIN 2.00 1.27 .05 --.76 1.65 4.80 4.00 2.25 MAX .096 .064 .008 .02 .060 .091 .220 .181 .115 MAX 2.44 1.63 .20 .51 1.52 2.32 5.59 4.60 2.92 NOTE SUGGESTED SOLDER PAD LAYOUT 0.090" 0.085" Notes: 1. High Temperature Solder Exemption Applied, see EU Directive Annex Notes 7. 0.070" Revision: D www.mccsemi.com 1 of 3 2013/08/19 MCC ES1A-L thru ES1 J - L TM Micro Commercial Components FIG.1-TYPICAL FORWARD FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS ES1A-LT~ES1D-LT 10 ES1G-LT 3.0 ES1J-LT 1.0 1.2 1.0 0.8 Single Phase 0.6 Half Wave 60Hz Resistive Or Inductive Load 0.4 0.2 0 0 20 40 60 Tj=25 C 0.1 .01 80 100 120 140 160 180 200 LEAD TEMPERATURE ( C) Pulse Width 300us 1% Duty Cycle FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE,(V) FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS 50W NONINDUCTIVE 10W NONINDUCTIVE ( ) (+) D.U.T. 25Vdc (approx.) PULSE GENERATOR (NOTE 2) ( ) PEAK FORWAARD SURGE CURRENT,(A) INSTANTANEOUS FORWARD CURRENT,(A) 50 50 40 30 Sine Wave 20 JEDEC method 10 0 1 5 (+) 1W NONINDUCTIVE 2. Rise Time= 10ns max., Source Impedance= 50 ohms. 0 35 JUNCTION CAPACITANCE,(pF) | | | | | | | | -0.25A 100 FIG.5-TYPICAL JUNCTION CAPACITANCE NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. +0.5A 50 10 NUMBER OF CYCLES AT 60Hz OSCILLISCOPE (NOTE 1) trr 8.3ms Single Half Tj=25 C 30 25 20 15 10 5 0 -1.0A 1cm .01 SET TIME BASE FOR .05 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) 50 / 10ns / cm Revision: D www.mccsemi.com 2 of 3 2013/08/19 MCC TM Micro Commercial Components Ordering Information : Device Packing Tape&Reel: 5Kpcs/Reel ES1A-LTP~ES1J-LTP Note : Adding "-HF" suffix for halogen free, eg. ES1A-LTP- HF~ES1J-LTP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Revision: D www.mccsemi.com 3 of 3 2013/08/19 3