Fast Rectifiers ES1F-ES1J Features * * * * * * For Surface Mount Applications Glass Passivated Junction Low Profile Package Easy Pick and Place Built-in Strain Relief Superfast Recovery Times for High Efficiency www.onsemi.com 1 CATHODE ABSOLUTE MAXIMUM RATINGS (TA = 25C unless otherwise noted) Value Symbol Parameter ES1F ES1G ES1H ES1J Unit 300 400 500 600 V VRRM Maximum Repetitive Reverse Voltage IF(AV) Average Rectified Forward Current 1.0 Non-repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave (JEDEC method) 30 IFSM 2 ANODE SMA (DO-214AC) Color Band Denotes Cathode CASE 403AE ORDERING INFORMATION A Package Shipping ES1F SMA (Pb-Free) 7500 / Tape & Reel ES1G SMA (Pb-Free) 7500 / Tape & Reel Device A TJ Operating Junction Temperature Range -55 to 150 C ES1H SMA (Pb-Free) 7500 / Tape & Reel TSTG Storage Temperature Range -55 to 150 C ES1J SMA (Pb-Free) 7500 / Tape & Reel 1.47 W PD Power Dissipation Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. THERMAL CHARACTERISTICS Symbol Characteristics Value Unit RJA Thermal Resistance, Junction-to-Ambient (Note 1) 85 C/W RJC Thermal Resistance, Junction-to-Case (Note 1) 61 C/W RJL Thermal Resistance, Junction-to-Lead (Note 1) 35 C/W 1. P. C. B mounted on 0.2 x 0.2 (5 x 5 mm) copper Pad Area. ELECTRICAL CHARACTERISTICS (TC = 25C, unless otherwise noted) Value ES1F Characteristics Symbol VF Maximum Forward Voltage @ IF = 1.0 A Trr Maximum Reverse Recovery Time, IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A IR Maximum Reverse Current @ rated VR TA = 25_C TA = 100_C Cj Typical Junction Capacitance, VR = 4.0 V, f = 1.0 MHz ES1G ES1H 1.3 ES1J 1.7 35 V ns mA 5.0 100 10.0 Unit 8.0 pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. (c) Semiconductor Components Industries, LLC, 2007 August, 2020 - Rev. 2 1 Publication Order Number: ES1J/D ES1F-ES1J TYPICAL PERFORMANCE CHARACTERISTICS 1.0 RESISTIVEOR INDUCTIVELOAD 0.2 x 0.2 (5.0 x 5.0 mm) COPPERPADAREAS 0.8 0.6 0.4 0.2 0 80 90 100 30 Peak Forward Surge Current (A) Average Forward Current (A) 1.2 110 120 130 140 8.3 ms Single Half Sine Wave (JEDEC Method) at TL = 120C 25 20 15 10 5 1 150 1 10 Figure 2. Maximum Non-repetitive Peak Forward Surge Current 2.5 1000 2 100 TA = -40C Instantaneous Reverse Current (mA) VF - Forward Voltage (V) Figure 1. Maximum Forward Current Derating Curve TA = -55C TA = 25C 1.5 1 0.5 TA = 85C TA = 125C 0 0.01 1 10 Junction Capacitance (pF) ES1F-G 10 Tj = 25C f = 1.0 MHz Vsig = 50 mVp-p ES1H-J 6.0 4.0 2.0 0 1 1 TJ = 25C 0.1 10 0 20 40 60 80 100 120 140 Figure 4. Typical Reverse Characteristics 14 0 TJ = 85C Percent of Rated Peak Reverse Voltage (%) IF - Forward Current (A) 8.0 10 TA = 150C Figure 3. Forward Current vs. Forward Voltage 12 TJ = 125C 0.01 0.1 100 Number of Cycles at 60 Hz Lead Temperature (5C) 100 Reverse Voltage (V) Figure 5. Typical Junction Capacitance www.onsemi.com 2 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SMA CASE 403AE ISSUE O B B 5.60 4.80 0.13 M C B DATE 31 AUG 2016 A 2.65 2.95 2.50 1.65 1.20 B 1.75 4.30 B A 4.75 4.00 LAND PATTERN RECOMMENDATION TOP VIEW 2.50 MAX A 2.20 1.90 B C 0.203 0.050 2.05 1.95 NOTES: 0.30 0.05 0.13 M C SIDE VIEW 8 0 B A A. EXCEPT WHERE NOTED, CONFORMS TO JEDEC DO214 VARIATION AC. B DOES NOT COMPLY JEDEC STANDARD VALUE. C. ALL DIMENSIONS ARE IN MILLIMETERS. D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. E. DIMENSIONS AND TOLERANCE AS PER ASME Y14.5-2009. E. LAND PATTERN STD. DIOM5025X231M R0.15 4X GAGE PLANE 0.45 8 0 0.41 0.15 1.52 0.75 DETAIL A SCALE 20 : 1 DOCUMENT NUMBER: DESCRIPTION: 98AON13440G SMA Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. (c) Semiconductor Components Industries, LLC, 2019 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800-282-9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative