1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Built Into Tomorrow
Benets
• Voltage range: 160 – 2,000 VDC
• Capacitance range: 220 pF – 33 µF
• Lead Spacing: 7.5 – 37.5 mm
• Capacitance tolerance: ±5%, ±10%, ±20%
• Climatic category: 55/105/56 IEC 60068–1
• Operatingtemperaturerangeof−55˚Cto+105˚C
• RoHS compliance and lead-free terminations
• Tape & Reel packaging in accordance with IEC 60286–2
• Self-healing
• Automotive (AEC–Q200) grades available up to lead
spacing 22.5 mm
Overview
The R75 Series is constructed of metallized polypropylene
lmwithradialleadsoftinnedwire.Theradialleads
are electrically welded to the metal layer on the ends of
the capacitor winding. The capacitor is encapsulated in
a self-extinguishing solvent resistant plastic case with
thermosetting resin material meeting the UL 94 V–0
requirements. Two different winding constructions are used
depending on voltage parameters and lead spacing. Please
see the Performance Characteristics for more information.
Automotive grade devices (up to lead spacing 22.5 mm)
meet the demanding Automotive Electronics Council's
AEC–Q200qualicationrequirements.
Applications
Typical applications include resonant circuit, high frequency
mediumtoheighcurrent,silicon-controlledrectier(SCR
and IGBT) and SiC (e.g. MOSFET) commutation circuits as
well as applications with high voltage and medium to high
current and DC link.
Not suitable for across-the-line application
(see Suppressor Capacitors).
Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial,
DC and Pulse Applications (Automotive Grade)
Part Number System
R75 P N 2820 AA 30 K
Series Rated Voltage (VDC) Lead Spacing (mm)
Capacitance Code
(pF)
Packaging Internal Use
Capacitance
Tolerance
Metallized
Polypropylene
G = 160
I = 250
M = 400
P = 630
Q = 1,000
R = 1,250
T = 1,600
U = 2,000
D = 7.5
F = 10
I = 15
N = 22.5
R = 27.5
W = 37.5
The last three
digits represent
signicantgures.
Therstdigit
speciesthetotal
number of zeros
to be added.
See Ordering
Options Table
00
10
20
30
40
50
60
70
80
L0
J = ±5%
K = ±10%
M = ±20%
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Ordering Options Table
1 = Not for all sizes, see "Packaging Quantities" table.
Lead Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
Lead and
Packaging
Code
7.5
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
4+2/−0
AA
Ammo Pack
H0 = 18.5±0.5
DQ
Other Lead and Packaging Options
Tape & Reel (Standard Reel Ø 355 mm)
H0 = 18.5±0.5
CK
Bulk (Bag) – Short Leads
2.7+0.5/−0
JA
Bulk (Bag) – Short Leads
3.5+0.5/−0
JB
Bulk (Bag) – Short Leads
4.0+0.5/−0
JE
Bulk (Bag) – Short Leads
3.2+0.3/−0.2
JH
Bulk (Bag) – Long Leads
18±1
JM
Bulk (Bag) – Long Leads
17+1/−2
Z3
10
15
22.5
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
4+2/−0
AA
Ammo Pack
H0 = 18.5±0.5
DQ
Other Lead and Packaging Options
Tape & Reel (Standard Reel Ø 355 mm)
H0 = 18.5±0.5
GY
Tape & Reel (Large Reel Ø 500 mm)
H0 = 18.5±0.5
CK
Bulk (Bag) – Short Leads
2.7+0.5/−0
JA
Bulk (Bag) – Short Leads
3.5+0.5/−0
JB
Bulk (Bag) – Short Leads
10±1
JC
Bulk (Bag) – Short Leads
4.0+0.5/−0
JE
Bulk (Bag) – Short Leads
3.2+0.3/−0.2
JH
Bulk (Bag) – Long Leads
18±1
JM
Bulk (Bag) – Long Leads
30+5/−0
40
Bulk (Bag) – Long Leads
25+2/−1
50
27.5
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
4+2/−0
AA
Other Lead and Packaging Options
Tape & Reel (Standard Reel Ø 355 mm)
H0 = 18.5±0.5
GY
Tape & Reel (Large Reel Ø 500 mm)
H0 = 18.5±0.5
CK
1
Bulk (Tray) – Short Leads
3.5+0.5/−0
JB
Bulk (Tray) – Short Leads
4.0+0.5/−0
JE
Bulk (Tray) – Short Leads
3.2+0.3/−0.2
JH
Bulk (Tray) – Long Leads
30+5/−0
40
Bulk (Tray) – Long Leads
25+2/−1
50
3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Ordering Options Table cont.
Dimensions – Millimeters
F
P2P2P2
L
Loose Taped
T
HH
0
LL
S
STH L F
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
7.5 ±0.4 3.0 +0.1/−0.5 8.0 +0.1/−0.5 10.0 +0.2/−0.5 0.5 ±0.05
7.5
±0.4
4.0
+0.1/−0.5
9.0
+0.1/−0.5
10.0
+0.2/−0.5
0.5
7.5 ±0.4 5.0 +0.1/−0.5 10.5 +0.1/−0.5 10.0 +0.2/−0.5 0.5 ±0.05
7.5
±0.4
6.0
+0.1/−0.5
12.0
+0.1/−0.5
10.5
+0.2/−0.5
0.5
10.0
±0.4
4.0
+0.2/−0.5
9.0
+0.1/−0.5
13.0
+0.2/−0.5
0.6
10.0
±0.4
5.0
+0.2/−0.5
11.0
+0.1/−0.5
13.0
+0.2/−0.5
0.6
10.0
±0.4
6.0
+0.2/−0.5
12.0
+0.1/−0.5
13.0
+0.2/−0.5
0.6
15.0
±0.4
4.0
+0.2/−0.5
10.0
+0.1/−0.5
18.0
+0.3/−0.5
0.8
15.0 ±0.4 5.0 +0.2/−0.5 11.0 +0.1/−0.5 18.0 +0.3/−0.5 0.8 ±0.05
15.0
±0.4
6.0
+0.2/−0.5
12.0
+0.1/−0.5
18.0
+0.3/−0.5
0.8
15.0 ±0.4 7.5 +0.2/−0.5 13.5 +0.1/−0.5 18.0 +0.5/−0.5 0.8 ±0.05
15.0
±0.4
8.5
+0.2/−0.5
14.5
+0.1/−0.5
18.0
+0.5/−0.5
0.8
Note: See Ordering Options Table for lead length (LL/Ho) options.
Lead Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
Lead and
Packaging
Code
37.5
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
4+2/−0
AA
Other Lead and Packaging Options
Bulk (Tray) – Short Leads
3.5+0.5/−0
JB
Bulk (Tray) – Short Leads
4.0+0.5/−0
JE
Bulk (Tray) – Short Leads
3.2+0.3/−0.2
JH
Bulk (Tray) – Long Leads
30+5/−0
40
Bulk (Tray) – Long Leads
25+2/−1
50
4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Dimensions – Millimeters cont.
F
P2P2P2
L
Loose Taped
T
HH
0
LL
S
STH L F
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
15.0
±0.4
9.0
+0.2/−0.5
12.5
+0.1/−0.5
18.0
+0.5/−0.5
0.8
15.0
±0.4
10.0
+0.2/−0.5
16.0
+0.1/−0.5
18.0
+0.5/−0.5
0.8
15.0
±0.4
11.0
+0.2/−0.5
19.0
+0.1/−0.5
18.0
+0.5/−0.5
0.8
15.0
±0.4
13.0
+0.1/−0.5
12.0
+0.1/−0.5
18.0
+0.5/−0.5
0.8
22.5
±0.4
6.0
+0.2/−0.5
15.0
+0.1/−0.5
26.5
+0.3/−0.5
0.8
22.5
±0.4
7.0
+0.2/−0.5
16.0
+0.1/−0.5
26.5
+0.3/−0.5
0.8
22.5
±0.4
8.5
+0.2/−0.5
17.0
+0.1/−0.5
26.5
+0.3/−0.5
0.8
22.5
±0.4
10.0
+0.2/−0.5
18.5
+0.1/−0.5
26.5
+0.3/−0.5
0.8
22.5
±0.4
11.0
+0.2/−0.5
20.0
+0.1/−0.5
26.5
+0.3/−0.5
0.8
22.5
±0.4
13.0
+0.2/−0.5
22.0
+0.1/−0.5
26.5
+0.3/−0.5
0.8
22.5
±0.4
14.5
+0.2/−0.5
29.5
+0.1/−0.5
26.5
+0.3/−0.5
0.8
27.5
±0.4
9.0
+0.2/−0.7
17.0
+0.1/−0.7
32.0
+0.3/−0.7
0.8
27.5
±0.4
11.0
+0.2/−0.7
20.0
+0.1/−0.7
32.0
+0.3/−0.7
0.8
27.5
±0.4
13.0
+0.2/−0.7
22.0
+0.1/−0.7
32.0
+0.3/−0.7
0.8
27.5
±0.4
13.0
+0.2/−0.7
25.0
+0.1/−0.7
32.0
+0.3/−0.7
0.8
27.5
±0.4
14.0
+0.2/−0.7
28.0
+0.1/−0.7
32.0
+0.3/−0.7
0.8
27.5
±0.4
18.0
+0.2/−0.7
33.0
+0.1/−0.7
32.0
+0.3/−0.7
0.8
27.5
±0.4
21.0
+0.2/−0.7
12.5
+0.1/−0.7
32.0
+0.3/−0.7
0.8
27.5
±0.4
22.0
+0.2/−0.7
37.0
+0.1/−0.7
32.0
+0.3/−0.7
0.8
27.5
±0.4
24.0
+0.2/−0.7
15.0
+0.1/−0.7
32.0
+0.3/−0.7
0.8
37.5
±0.4
11.0
+0.3/−0.7
22.0
+0.1/−0.7
41.5
+0.3/−0.7
1.0
37.5
±0.4
13.0
+0.3/−0.7
24.0
+0.1/−0.7
41.5
+0.3/−0.7
1.0
37.5
±0.4
16.0
+0.3/−0.7
28.5
+0.1/−0.7
41.5
+0.3/−0.7
1.0
37.5
±0.4
19.0
+0.3/−0.7
32.0
+0.1/−0.7
41.5
+0.3/−0.7
1.0
37.5
±0.4
20.0
+0.3/−0.7
40.0
+0.1/−0.7
41.5
+0.3/−0.7
1.0
37.5
±0.4
24.0
+0.3/−0.7
44.0
+0.1/−0.7
41.5
+0.3/−0.7
1.0
37.5
±0.4
24.0
+0.3/−0.7
15.0
+0.1/−0.7
41.5
+0.3/−0.7
1.0
37.5
±0.4
24.0
+0.3/−0.7
19.0
+0.1/−0.7
41.5
+0.3/−0.7
1.0
37.5
±0.4
30.0
+0.3/−0.7
45.0
+0.1/−0.7
41.5
+0.3/−0.7
1.0
Note: See Ordering Options Table for lead length (LL/Ho) options.
5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Performance Characteristics
Dielectric Polypropylenelm
Plates Metal layer deposited by evaporation under vacuum
Winding Non-inductive type
Leads Tinned wire
Protection Plasticcase,thermosettingresinlled.BoxmaterialissolventresistantandameretardantaccordingtoUL94.
Related Documents IEC 60384–16
Sections 1 3
Rated Voltage VR (VDC) 160 160 250 250 400 400 630 630 1,000 1,000 1,250 1,600 2,000
Rated Voltage VR (VAC) 70 90 140 160 200 220 220 250 250 400 450/600 650 700
Capacitance Range (µF)
0.1
– 0.33
0.068
– 33
0.068
– 0.22
0.027
– 33
0.027
– 0.068
0.01
– 15
0.01
– 0.027
0.001
– 8.2
0.012
– 3.9
0.00022
– 0.0082
0.0082
– 2.2
0.0039
– 1.5
0.001
– 1
Capacitance Values E12series(IEC60063)measuredat1kHzand+20±1°C
Capacitance Tolerance ±5%, ±10%, ±20%
Operating Temperature
Range −55°Cto+105°C
Rated Temperature TR+85°C
Voltage Derating Above+85°CDCvoltagederatingis2%/°CandACvoltagederatingis1.25%/°C
Climatic Category 55/105/56 IEC 60068–1
Storage Conditions
Storagetime:≤24monthsfromthedatemarkedonthelabelpackage
Averagerelativehumidityperyear≤70%
RH≤85%for30daysrandomlydistributedthroughouttheyear
Dew is absent
Temperature:−40to80°C(see"MaximumHumidityinStorageConditions"graphabove)
Test Voltage 1.6 x VRVDCfor2seconds(betweenterminations)at+25°C±5°C
Capacitance Drift
Maximum0.5%aftera2yearstorageperiodatatemperatureof+10°Cto+40°Candarelativehumidityof
40% to 60%
Maximum Pulse
Steepness
dV/dt according to Table 1. For working voltages lower than rated voltage (V < VR),thespecieddV/dt
can be multiplied by the factor V
R
/V.
Reliability
(Reference IEC 61709)
Operationallife>200,000hoursat85°C
Failurerate≤1FIT,T=+40°C,V=0.5xVR
Failure criteria: open or short circuit, capacitance change > 10%, DF 2 times the catalog limits,
IR < 0.005 x initial limit
TemperatureCoecient −(200±100)ppm/°Cat1kHz
Self Inductance
(Lead Length ~ 2 mm)
Lead Spacing
(mm)
7.5 10 15 22.5 27.5 37.5
L(nH)≈ 8 9 10 16 18 20
Maximum 1 nH per 1 mm lead and capacitor length.
6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Performance Characteristics cont.
* Typical value
0
10
20
30
40
50
60
70
80
90
100
−
40
−
20 0 20 40 60 80
Temperature (°C)
Maximum Humidity in Storage Condition
Relative Humidity (%)
30 Days
Annual Average
Maximum Irms vs. Th
Maximum Irms
0%
20%
40%
60%
80%
100%
120%
85 90 95 100 105 110
Maximum Irms vs. Th
Maximum Irms
Temperature Th(°C)
Maximum Overtemperature ∆Tlim vs Th
Temperature T
h
(°C)
∆Tlim (°C)
0
5
10
15
20
25
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
Th is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation
conditions in °C.
Qualication
Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details
regardingtestmethodsandconditionsarereferencedindocumentAEC–Q200,StressTestQualicationforPassive
Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their
website at www.aecouncil.com.
DissipationFactortanδ
MaximumValuesat25°C±5°C
Frequency C≤0.1µF 0.1µF<C≤1.0µF 1.0µF<C≤4.7µF C > 4.7 µF
1 kHz 0.04% 0.05% 0.06% 0.10%
10 kHz 0.06% 0.08% - -
100 kHz 0.25% ---
Insulation Resistance
Measuredat+25°C±5°C,100VDC60seconds
Minimum Values Between Terminals
C≤0.33μF C>0.33μF
≥100,000MΩ
(≥500,000MΩ)*
≥30,000MΩ•µF
(≥150,000MΩ•µF)*
7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/Th ≤ 85°C)
1
10
100
1,000
0 1 10 100 1,000
Voltage (Vrms)
Frequency (kHz)
160 VDC/90 (70) VAC
0.01 µF p = 7.5
0.1 µF p = 10
0.33 µF p = 15
1 µF p = 22.5
3.3 µF p = 27.5
15 µF p = 37.5
0.015 µF p = 10
0.047 µF p = 10
0.22 µF p = 15
1 µF p = 22.5
3.3 µF p = 27.5
15 µF p = 37.5
1
10
100
1,000
0 1 10 100 1,000
Voltage (Vrms)
Frequency (kHz)
250 VDC/160 (140) VAC
1
10
100
1,000
0 1 10 100 1,000
Voltage (Vrms)
Frequency (kHz)
400 VDC/220 (200) VAC
1
10
100
1,000
0 1 10 100 1,000
Voltage (Vrms)
Frequency (kHz)
630 VDC/250 (220) VAC
0.056 µF p = 10
0.022 µF p = 10
0.1 µF p = 15
0.47 µF p = 22.5
1.5 µF p = 27.5
6.8 µF p = 37.5
0.056 µF p = 10
0.022 µF p = 10
0.1 µF p = 15
0.47 µF p = 22.5
1.5 µF p = 27.5
6.8 µF p = 37.5
8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/Th ≤ 85°C) cont.
1
10
100
1,000
0 1 10 100 1,000
Voltage (Vrms)
Frequency (kHz)
1,000 VDC/250 (400) VAC
1
10
100
1,000
0 1 10 100 1,000
Voltage (Vrms)
Frequency (kHz)
1,250 VDC/600 VAC
1
10
100
1,000
0 1 10 100 1,000
Voltage (Vrms)
Frequency (kHz)
1,600 VDC/650 VAC
1
10
100
1,000
0 1 10 100 1,000
Voltage (Vrms)
Frequency (kHz)
2,000 VDC/700 VAC
1,000 pF p = 7.5
0.033 µF p = 15
0.1 µF p = 22.5
0.68 µF p = 27.5
1.2 µF p = 27.5
3.3 µF p = 37.5
0.01 µF p = 10
0.047 µF p = 15
0.15 µF p = 22.5
0.47 µF p = 27.5
1 µF p = 37.5
2.2 µF p = 37.5
0.01 µF p = 22.5
0.047 µF p = 22.5
0.1 µF p = 27.5
0.18 µF p = 37.5
0.47 µF p = 27.5
1.2 µF p = 37.5
3,300 pF p = 15
0.047 µF p = 22.5
0.1 µF p = 27.5
0.15 µF p = 27.5
0.39 µF p = 27.5
0.82 µF p = 37.5
9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/Th ≤ 85°C)
0.01
1
0.1
10
100
0 1 10 100 1,000
Current (Irms)
Frequency (kHz)
160 VDC/90 (70) VAC 250 VDC/160 (140) VAC
0.01 µF p = 7.5
0.1 µF p = 10
0.33 µF p = 15
1 µF p = 22.5
3.3 µF p = 27.5
15 µF p = 37.5
0 1 10 100 1,000
Current (Irms)
Frequency (kHz)
0.01
1
0.1
10
100
0 1 10 100 1,000
Current (Irms)
Frequency (kHz)
400 VDC/220 (200) VAC
0.01
1
0.1
10
100
0 1 10 100 1,000
Current (Irms)
Frequency (kHz)
630 VDC/250 (220) VAC
0.01
1
0.1
10
100
0.015 µF p = 10
0.047 µF p = 10
0.22 µF p = 15
1 µF p = 22.5
3.3 µF p = 27.5
15 µF p = 37.5
0.056 µF p = 10
0.022 µF p = 10
0.1 µF p = 15
0.47 µF p = 22.5
1.5 µF p = 27.5
6.8 µF p = 37.5
0.015 µF p = 10
2,200 pF p = 7.5
0.068 µF p = 15
0.33 µF p = 22.5
1 µF p = 27.5
4.7 µF p = 37.5
10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/Th ≤ 85°C) cont.
0.01
1
0.1
10
100
0 1 10 100 1,000
Current (Irms)
Frequency (kHz)
1,000 VDC/250 (400) VAC 1,250 VDC/600 VAC
0 1 10 100 1,000
Current (Irms)
Frequency (kHz)
0.01
1
0.1
10
100
0 1 10 100 1,000
Current (Irms)
Frequency (kHz)
1,600 VDC/650 VAC
0.01
1
0.1
10
100
0 1 10 100 1,000
Current (Irms)
Frequency (kHz)
2,000 VDC/700 VAC
0.01
1
0.1
10
100
0.015 µF p = 10
2,200 pF p = 7.5
0.068 µF p = 15
0.33 µF p = 22.5
1 µF p = 27.5
4.7 µF p = 37.5
1,000 pF p = 7.5
0.033 µF p = 15
0.1 µF p = 22.5
0.68 µF p = 27.5
1.2 µF p = 27.5
3.3 µF p = 37.5
0.01 µF p = 15
0.047 µF p = 15
0.15 µF p = 22.5
0.47 µF p = 27.5
1 µF p = 37.5
2.2 µF p = 37.5
0.01 µF p = 22.5
0.047 µF p = 22.5
0.1 µF p = 27.5
0.18 µF p = 37.5
0.47 µF p = 27.5
1.2 µF p = 37.5
0.047 µF p = 22.5
3,300 pF p = 15
0.1 µF p = 27.5
0.15 µF p = 27.5
0.39 µF p = 27.5
0.82 µF p = 37.5
11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Environmental Test Data
Damp Heat, Steady
State Test
Test Conditions: Performances
Temperature:
Relative humidity (RH):
Test duration:
+40°C±2°C
93% ±2%
56 days
|
ΔC/C
|
≤2%,
Δtanδ≤0.001at1kHz
IRaftertest≥50%ofinitiallimit
Endurance Test Test Conditions Performances
Temperature:
Voltage applied:
Test duration:
+85°C±2°C
1.25 x VR (DC)
2,000 hours
| ΔC/C|≤3%,
Δtanδ≤0.001at10kHzforC≤1µF
Δtanδ≤0.001at1kHzforC>1µF
IRaftertest≥50%ofinitiallimit
Resistance to Soldering
Heat Test
Test Conditions Performances
Solder bath temperature:
Dipping time
(with heat screen):
260°C±5°C
10 seconds ±1 second
| ΔC/C|≤1%,
Δtanδ≤0.001at10kHzforC≤1µF
Δtanδ≤0.001at1kHzforC>1µF
IRaftertest≥initiallimit
Environmental Compliance
All KEMET pulse capacitors are RoHS Compliant.
12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Table 1 – Ratings & Part Number Reference
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%
(3) K = 10%, M = 20%
(*) Irms value that leads to a ΔT of ≈ 20°C on the box surface > TBOX = TAMB + ΔT = 85°C + 20°C = 105°C
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4 mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
160 70 0.1 4.0 9.0 10.0 7.5 100 32,000 10 811.1 4.40 88 75GD3100(1)B0(2) R75GD3100(1)B0(2)
160 70 0.12 5.0 10.5 10.0 7.5 100 32,000 12 89.3 5.25 78 75GD3120(1)B0(2) R75GD3120(1)B0(2)
160 70 0.15 5.0 10.5 10.0 7.5 100 32,000 15 87.4 5.87 78 75GD3150(1)B0(2) R75GD3150(1)B0(2)
160 70 0.18 6.0 12.0 10.5 7.5 100 32,000 18 810.6 5.21 69 75GD3180(1)A0(2) R75GD3180(1)A0(2)
160 70 0.22 6.0 12.0 10.5 7.5 100 32,000 22 88.7 5.76 69 75GD3220(1)A0(2) R75GD3220(1)A0(2)
160 70 0.12 4.0 9.0 13.0 10.0 90 28,800 11 913.3 4.38 79 75GF3120(1)A0(2) R75GF3120(1)A0(2)
160 70 0.15 4.0 9.0 13.0 10.0 90 28,800 14 910.6 4.90 79 75GF3150(1)A0(2) R75GF3150(1)A0(2)
160 70 0.18 5.0 11.0 13.0 10.0 90 28,800 16 913.3 4.67 69 75GF3180(1)A0(2) R75GF3180(1)A0(2)
160 70 0.22 5.0 11.0 13.0 10.0 90 28,800 20 910.9 5.17 69 75GF3220(1)A0(2) R75GF3220(1)A0(2)
160 70 0.27 6.0 12.0 13.0 10.0 90 28,800 24 917.7 4.21 64 75GF3270(1)A0(2) R75GF3270(1)A0(2)
160 70 0.33 6.0 12.0 13.0 10.0 90 28,800 30 914.5 4.65 64 75GF3330(1)A0(2) R75GF3330(1)A0(2)
160 90 0.068 4.0 9.0 10.0 7.5 310 99,200 21 816.4 3.73 88 75GD2680(1)40(2) R75GD2680(1)40(2)
160 90 0.082 4.0 9.0 10.0 7.5 310 99,200 25 813.6 4.10 88 75GD2820(1)40(2) R75GD2820(1)40(2)
160 90 0.1 5.0 10.5 10.0 7.5 310 99,200 31 811.1 4.80 78 75GD3100(1)40(2) R75GD3100(1)40(2)
160 90 0.12 5.0 10.5 10.0 7.5 310 99,200 37 89.3 5.25 78 75GD3120(1)40(2) R75GD3120(1)40(2)
160 90 0.15 6.0 12.0 10.5 7.5 310 99,200 47 87.4 6.23 69 75GD3150(1)00(2) R75GD3150(1)00(2)
160 90 0.18 6.0 12.0 10.5 7.5 310 99,200 56 810.6 5.21 69 75GD3180(1)30(2) R75GD3180(1)30(2)
160 90 0.082 4.0 9.0 13.0 10.0 200 64,000 16 919.4 3.62 79 75GF2820(1)00(2) R75GF2820(1)00(2)
160 90 0.1 4.0 9.0 13.0 10.0 200 64,000 20 915.9 4.00 79 75GF3100(1)30(2) R75GF3100(1)30(2)
160 90 0.12 5.0 11.0 13.0 10.0 200 64,000 24 913.3 4.67 69 75GF3120(1)00(2) R75GF3120(1)00(2)
160 90 0.15 5.0 11.0 13.0 10.0 200 64,000 30 910.6 5.22 69 75GF3150(1)00(2) R75GF3150(1)00(2)
160 90 0.18 6.0 12.0 13.0 10.0 200 64,000 36 913.3 4.86 64 75GF3180(1)00(2) R75GF3180(1)00(2)
160 90 0.22 6.0 12.0 13.0 10.0 200 64,000 44 910.9 5.37 64 75GF3220(1)30(2) R75GF3220(1)30(2)
160 90 0.18 5.0 11.0 18.0 15.0 120 38,400 22 10 13.3 5.00 60 75GI3180(1)00(2) R75GI3180(1)00(2)
160 90 0.22 5.0 11.0 18.0 15.0 120 38,400 26 10 10.9 5.53 60 75GI3220(1)00(2) R75GI3220(1)00(2)
160 90 0.27 6.0 12.0 18.0 15.0 120 38,400 32 10 17.7 4.50 56 75GI3270(1)00(2) R75GI3270(1)00(2)
160 90 0.33 6.0 12.0 18.0 15.0 120 38,400 40 10 14.5 4.97 56 75GI3330(1)00(2) R75GI3330(1)00(2)
160 90 0.39 7.5 13.5 18.0 15.0 120 38,400 47 10 12.2 5.68 51 75GI3390(1)00(2) R75GI3390(1)00(2)
160 90 0.47 7.5 13.5 18.0 15.0 120 38,400 56 10 10.2 6.23 51 75GI3470(1)00(2) R75GI3470(1)00(2)
160 90 0.47 9.0 12.5 18.0 15.0 120 38,400 56 10 10.2 6.30 50 75GI3470(1)60(2) R75GI3470(1)60(2)
160 90 0.56 8.5 14.5 18.0 15.0 120 38,400 67 10 8.5 7.01 48 75GI3560(1)00(2) R75GI3560(1)00(2)
160 90 0.56 9.0 12.5 18.0 15.0 120 38,400 67 10 8.5 6.88 50 75GI3560(1)60(2) R75GI3560(1)60(2)
160 90 0.68 8.5 14.5 18.0 15.0 120 38,400 82 10 7.0 7.72 48 75GI3680(1)00(2) R75GI3680(1)00(2)
160 90 0.68 13.0 12.0 18.0 15.0 120 38,400 82 10 7.0 7.96 45 75GI3680(1)60(2) R75GI3680(1)60(2)
160 90 0.82 10.0 16.0 18.0 15.0 120 38,400 98 10 5.8 8.83 44 75GI3820(1)00(2) R75GI3820(1)00(2)
160 90 110.0 16.0 18.0 15.0 120 38,400 120 10 4.8 9.75 44 75GI4100(1)00(2) R75GI4100(1)00(2)
160 90 0.82 7.0 16.0 26.5 22.5 70 22,400 57 16 9.7 7.09 41 75GN3820(1)00(2) R75GN3820(1)00(2)
160 90 17.0 16.0 26.5 22.5 70 22,400 70 16 8.0 7.83 41 75GN4100(1)00(2) R75GN4100(1)00(2)
160 90 1.2 8.5 17.0 26.5 22.5 70 22,400 84 16 13.3 6.27 38 75GN4120(1)00(2) R75GN4120(1)00(2)
160 90 1.5 10.0 18.5 26.5 22.5 70 22,400 105 16 10.6 7.26 36 75GN4150(1)00(2) R75GN4150(1)00(2)
160 90 1.8 10.0 18.5 26.5 22.5 70 22,400 126 16 8.8 7.95 36 75GN4180(1)00(2) R75GN4180(1)00(2)
160 90 1.5 9.0 17.0 32.0 27.5 60 19,200 90 18 10.6 7.34 35 75GR4150(1)00(2) R75GR4150(1)00(2)
160 90 1.8 9.0 17.0 32.0 27.5 60 19,200 108 18 8.8 8.05 35 75GR4180(1)00(2) R75GR4180(1)00(2)
160 90 2.2 11.0 20.0 32.0 27.5 60 19,200 132 18 7.2 9.38 31 75GR4220(1)30(2) R75GR4220(1)30(2)
160 90 2.7 11.0 20.0 32.0 27.5 60 19,200 162 18 8.8 8.49 31 75GR4270(1)00(2) R75GR4270(1)00(2)
160 90 3.3 13.0 22.0 32.0 27.5 60 19,200 198 18 7.2 9.75 29 75GR4330(1)00(2) R75GR4330(1)00(2)
160 90 3.3 24.0 15.0 32.0 27.5 60 19,200 198 18 7.2 10.09 27 75GR4330(1)L0(2) R75GR4330(1)L0(2)
160 90 3.9 13.0 22.0 32.0 27.5 60 19,200 234 18 6.1 10.60 29 75GR4390(1)00(2) R75GR4390(1)00(2)
160 90 3.9 24.0 15.0 32.0 27.5 60 19,200 234 18 6.1 10.97 27 75GR4390(1)L0(2) R75GR4390(1)L0(2)
160 90 4.7 13.0 25.0 32.0 27.5 60 19,200 282 18 5.1 11.91 28 75GR4470(1)30(2) R75GR4470(1)30(2)
VDC VAC Cap
Value
TH L Lead
Spacing
(S)
dV/dt
(V/µs) Max K0
(V2/µs)
Apk
nH mΩ Arms
(°C/W) KEMET Internal
Part Number Customer
Part Number
Lead
Length
2x 4 mm
at
100
kHz
at 100 kHz,
85°C
Dimensions Ipkr ESL ESR Irms max (*) Rth
13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4 mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
160 90 5.6 14.0 28.0 32.0 27.5 60 19,200 336 18 4.3 13.41 26 75GR4560(1)00(2) R75GR4560(1)00(2)
160 90 6.8 18.0 33.0 32.0 27.5 60 19,200 408 18 7.0 11.14 23 75GR4680(1)00(2) R75GR4680(1)00(2)
160 90 8.2 18.0 33.0 32.0 27.5 60 19,200 492 18 5.8 12.24 23 75GR4820(1)00(2) R75GR4820(1)00(2)
160 90 10 22.0 37.0 32.0 27.5 60 19,200 600 18 4.8 14.20 21 75GR5100(1)00(2) R75GR5100(1)00(2)
160 90 12 22.0 37.0 32.0 27.5 60 19,200 720 18 4.0 15.56 21 75GR5120(1)00(2) R75GR5120(1)00(2)
160 90 3.3 11.0 22.0 41.5 37.5 35 11,200 116 20 7.2 10.10 27 75GW4330(1)00(2) R75GW4330(1)00(2)
160 90 3.9 11.0 22.0 41.5 37.5 35 11,200 137 20 6.1 10.98 27 75GW4390(1)00(2) R75GW4390(1)00(2)
160 90 4.7 11.0 22.0 41.5 37.5 35 11,200 165 20 5.1 12.05 27 75GW4470(1)00(2) R75GW4470(1)00(2)
160 90 5.6 13.0 24.0 41.5 37.5 35 11,200 196 20 4.3 13.63 25 75GW4560(1)00(2) R75GW4560(1)00(2)
160 90 6.8 16.0 28.5 41.5 37.5 35 11,200 238 20 7.0 11.24 23 75GW4680(1)00(2) R75GW4680(1)00(2)
160 90 6.8 24.0 15.0 41.5 37.5 35 11,200 238 20 7.0 10.81 24 75GW4680(1)L0(2) R75GW4680(1)L0(2)
160 90 8.2 16.0 28.5 41.5 37.5 35 11,200 287 20 5.8 12.34 23 75GW4820(1)00(2) R75GW4820(1)00(2)
160 90 8.2 24.0 19.0 41.5 37.5 35 11,200 287 20 5.8 12.26 23 75GW4820(1)L0(2) R75GW4820(1)L0(2)
160 90 10 19.0 32.0 41.5 37.5 35 11,200 350 20 4.8 14.23 21 75GW5100(1)00(2) R75GW5100(1)00(2)
160 90 12 19.0 32.0 41.5 37.5 35 11,200 420 20 4.0 15.59 21 75GW5120(1)00(2) R75GW5120(1)00(2)
160 90 15 20.0 40.0 41.5 37.5 35 11,200 525 20 3.2 18.30 19 75GW5150(1)00(2) R75GW5150(1)00(2)
160 90 18 20.0 40.0 41.5 37.5 35 11,200 630 20 2.7 20.05 19 75GW5180(1)00(2) R75GW5180(1)00(2)
160 90 22 24.0 44.0 41.5 37.5 35 11,200 770 20 2.2 23.13 17 75GW5220(1)00(2) R75GW5220(1)00(2)
160 90 27 30.0 45.0 41.5 37.5 35 11,200 945 20 1.8 26.57 16 75GW5270(1)00(2) R75GW5270(1)00(2)
160 90 33 30.0 45.0 41.5 37.5 35 11,200 1,155 20 1.4 29.37 16 75GW5330(1)00(2) R75GW5330(1)00(2)
250 140 0.068 4.0 9.0 10.0 7.5 180 90,000 12 816.4 3.73 88 75ID2680(1)B0(2) R75ID2680(1)B0(2)
250 140 0.082 4.0 9.0 10.0 7.5 180 90,000 15 813.6 4.10 88 75ID2820(1)B0(2) R75ID2820(1)B0(2)
250 140 0.1 5.0 10.5 10.0 7.5 180 90,000 18 811.1 4.80 78 75ID3100(1)B0(2) R75ID3100(1)B0(2)
250 140 0.12 5.0 10.5 10.0 7.5 180 90,000 22 89.3 5.25 78 75ID3120(1)B0(2) R75ID3120(1)B0(2)
250 140 0.15 6.0 12.0 10.5 7.5 180 90,000 27 87.4 6.23 69 75ID3150(1)A0(2) R75ID3150(1)A0(2)
250 140 0.18 6.0 12.0 10.5 7.5 180 90,000 32 810.6 5.21 69 75ID3180(1)A0(2) R75ID3180(1)A0(2)
250 140 0.082 4.0 9.0 13.0 10.0 150 75,000 12 919.4 3.62 79 75IF2820(1)A0(2) R75IF2820(1)A0(2)
250 140 0.1 4.0 9.0 13.0 10.0 150 75,000 15 915.9 4.00 79 75IF3100(1)A0(2) R75IF3100(1)A0(2)
250 140 0.12 5.0 11.0 13.0 10.0 150 75,000 18 913.3 4.67 69 75IF3120(1)A0(2) R75IF3120(1)A0(2)
250 140 0.15 5.0 11.0 13.0 10.0 150 75,000 23 910.6 5.22 69 75IF3150(1)A0(2) R75IF3150(1)A0(2)
250 140 0.18 6.0 12.0 13.0 10.0 150 75,000 27 913.3 4.86 64 75IF3180(1)A0(2) R75IF3180(1)A0(2)
250 140 0.22 6.0 12.0 13.0 10.0 150 75,000 33 910.9 5.37 64 75IF3220(1)A0(2) R75IF3220(1)A0(2)
250 160 0.027 4.0 9.0 10.0 7.5 650 325,000 18 841.3 2.35 88 75ID2270(1)40(2) R75ID2270(1)40(2)
250 160 0.033 4.0 9.0 10.0 7.5 650 325,000 21 833.8 2.60 88 75ID2330(1)40(2) R75ID2330(1)40(2)
250 160 0.039 4.0 9.0 10.0 7.5 650 325,000 25 828.6 2.83 88 75ID2390(1)40(2) R75ID2390(1)40(2)
250 160 0.047 4.0 9.0 10.0 7.5 650 325,000 31 823.7 3.10 88 75ID2470(1)40(2) R75ID2470(1)40(2)
250 160 0.056 4.0 9.0 10.0 7.5 650 325,000 36 819.9 3.39 88 75ID2560(1)40(2) R75ID2560(1)40(2)
250 160 0.068 5.0 10.5 10.0 7.5 650 325,000 44 816.4 3.95 78 75ID2680(1)40(2) R75ID2680(1)40(2)
250 160 0.082 5.0 10.5 10.0 7.5 650 325,000 53 813.6 4.34 78 75ID2820(1)40(2) R75ID2820(1)40(2)
250 160 0.1 6.0 12.0 10.5 7.5 650 325,000 65 811.1 5.09 69 75ID3100(1)30(2) R75ID3100(1)30(2)
250 160 0.12 6.0 12.0 10.5 7.5 650 325,000 78 89.3 5.57 69 75ID3120(1)30(2) R75ID3120(1)30(2)
250 160 0.033 4.0 9.0 13.0 10.0 570 285,000 19 933.8 2.75 79 75IF2330(1)00(2) R75IF2330(1)00(2)
250 160 0.039 4.0 9.0 13.0 10.0 570 285,000 22 928.6 2.99 79 75IF2390(1)00(2) R75IF2390(1)00(2)
250 160 0.047 4.0 9.0 13.0 10.0 570 285,000 27 923.7 3.28 79 75IF2470(1)30(2) R75IF2470(1)30(2)
250 160 0.056 4.0 9.0 13.0 10.0 570 285,000 32 928.4 2.99 79 75IF2560(1)30(2) R75IF2560(1)30(2)
250 160 0.068 4.0 9.0 13.0 10.0 570 285,000 39 923.4 3.30 79 75IF2680(1)30(2) R75IF2680(1)30(2)
250 160 0.082 5.0 11.0 13.0 10.0 570 285,000 47 919.4 3.86 69 75IF2820(1)30(2) R75IF2820(1)30(2)
250 160 0.1 5.0 11.0 13.0 10.0 570 285,000 57 915.9 4.27 69 75IF3100(1)30(2) R75IF3100(1)30(2)
250 160 0.12 6.0 12.0 13.0 10.0 570 285,000 68 913.3 4.86 64 75IF3120(1)30(2) R75IF3120(1)30(2)
250 160 0.15 6.0 12.0 13.0 10.0 570 285,000 86 910.6 5.43 64 75IF3150(1)30(2) R75IF3150(1)30(2)
VDC VAC Cap
Value
TH L Lead
Spacing
(S)
dV/dt
(V/µs) Max K0
(V2/µs)
Apk
nH mΩ Arms
(°C/W) KEMET Internal
Part Number Customer
Part Number
Lead
Length
2x 4 mm
at
100
kHz
at 100 kHz,
85°C
Dimensions Ipkr ESL ESR Irms max (*) Rth
Table 1 – Ratings & Part Number Reference cont.
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%
(3) K = 10%, M = 20%
(*) Irms value that leads to a ΔT of ≈ 20°C on the box surface > TBOX = TAMB + ΔT = 85°C + 20°C = 105°C
14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4 mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
250 160 0.12 5.0 11.0 18.0 15.0 310 155,000 37 10 13.3 5.00 60 75II3120(1)30(2) R75II3120(1)30(2)
250 160 0.15 5.0 11.0 18.0 15.0 310 155,000 47 10 10.6 5.59 60 75II3150(1)30(2) R75II3150(1)30(2)
250 160 0.18 5.0 11.0 18.0 15.0 310 155,000 56 10 13.3 5.00 60 75II3180(1)40(2) R75II3180(1)40(2)
250 160 0.22 5.0 11.0 18.0 15.0 310 155,000 68 10 10.9 5.53 60 75II3220(1)40(2) R75II3220(1)40(2)
250 160 0.27 6.0 12.0 18.0 15.0 310 155,000 84 10 17.7 4.50 56 75II3270(1)40(2) R75II3270(1)40(2)
250 160 0.33 6.0 12.0 18.0 15.0 310 155,000 102 10 14.5 4.97 56 75II3330(1)40(2) R75II3330(1)40(2)
250 160 0.39 7.5 13.5 18.0 15.0 310 155,000 121 10 12.2 5.68 51 75II3390(1)40(2) R75II3390(1)40(2)
250 160 0.39 9.0 12.5 18.0 15.0 310 155,000 121 10 12.2 5.74 50 75II3390(1)70(2) R75II3390(1)70(2)
250 160 0.47 7.5 13.5 18.0 15.0 310 155,000 146 10 10.2 6.23 51 75II3470(1)40(2) R75II3470(1)40(2)
250 160 0.47 9.0 12.5 18.0 15.0 310 155,000 146 10 10.2 6.30 50 75II3470(1)80(2) R75II3470(1)80(2)
250 160 0.56 7.5 13.5 18.0 15.0 310 155,000 174 10 8.5 6.80 51 75II3560(1)40(2) R75II3560(1)40(2)
250 160 0.56 9.0 12.5 18.0 15.0 310 155,000 174 10 8.5 6.88 50 75II3560(1)80(2) R75II3560(1)80(2)
250 160 0.68 8.5 14.5 18.0 15.0 310 155,000 211 10 7.0 7.72 48 75II3680(1)40(2) R75II3680(1)40(2)
250 160 0.68 13.0 12.0 18.0 15.0 310 155,000 211 10 7.0 7.96 45 75II3680(1)80(2) R75II3680(1)80(2)
250 160 0.82 10.0 16.0 18.0 15.0 310 155,000 254 10 5.8 8.83 44 75II3820(1)40(2) R75II3820(1)40(2)
250 160 0.82 13.0 12.0 18.0 15.0 310 155,000 254 10 5.8 8.75 45 75II3820(1)80(2) R75II3820(1)80(2)
250 160 110.0 16.0 18.0 15.0 310 155,000 310 10 4.8 9.75 44 75II4100(1)40(2) R75II4100(1)40(2)
250 160 1.2 11.0 19.0 18.0 15.0 310 155,000 372 10 6.6 8.66 40 75II4120(1)40(2) R75II4120(1)40(2)
250 160 0.22 6.0 15.0 26.5 22.5 130 65,000 29 16 12.3 6.12 43 75IN3220(1)30(2) R75IN3220(1)30(2)
250 160 0.33 6.0 15.0 26.5 22.5 130 65,000 43 16 9.6 6.91 43 75IN3330(1)30(2) R75IN3330(1)30(2)
250 160 0.39 6.0 15.0 26.5 22.5 130 65,000 51 16 10.2 6.72 43 75IN3390(1)30(2) R75IN3390(1)30(2)
250 160 0.47 6.0 15.0 26.5 22.5 130 65,000 61 16 8.5 7.38 43 75IN3470(1)30(2) R75IN3470(1)30(2)
250 160 0.56 6.0 15.0 26.5 22.5 130 65,000 73 16 11.4 6.37 43 75IN3560(1)40(2) R75IN3560(1)40(2)
250 160 0.68 6.0 15.0 26.5 22.5 130 65,000 88 16 9.4 7.01 43 75IN3680(1)40(2) R75IN3680(1)40(2)
250 160 0.82 7.0 16.0 26.5 22.5 130 65,000 107 16 9.7 7.09 41 75IN3820(1)40(2) R75IN3820(1)40(2)
250 160 17.0 16.0 26.5 22.5 130 65,000 130 16 8.0 7.83 41 75IN4100(1)40(2) R75IN4100(1)40(2)
250 160 1.2 8.5 17.0 26.5 22.5 130 65,000 156 16 13.3 6.27 38 75IN4120(1)40(2) R75IN4120(1)40(2)
250 160 1.5 10.0 18.5 26.5 22.5 130 65,000 195 16 10.6 7.26 36 75IN4150(1)40(2) R75IN4150(1)40(2)
250 160 1.8 10.0 18.5 26.5 22.5 130 65,000 234 16 8.8 7.95 36 75IN4180(1)40(2) R75IN4180(1)40(2)
250 160 2.2 11.0 20.0 26.5 22.5 130 65,000 286 16 7.2 9.02 34 75IN4220(1)40(2) R75IN4220(1)40(2)
250 160 2.7 13.0 22.0 26.5 22.5 130 65,000 351 16 8.8 8.49 31 75IN4270(1)40(2) R75IN4270(1)40(2)
250 160 3.3 13.0 22.0 26.5 22.5 130 65,000 429 16 7.2 9.39 31 75IN4330(1)40(2) R75IN4330(1)40(2)
250 160 19.0 17.0 32.0 27.5 100 50,000 100 18 8.0 8.48 35 75IR4100(1)30(2) R75IR4100(1)30(2)
250 160 1.2 9.0 17.0 32.0 27.5 100 50,000 120 18 13.3 6.57 35 75IR4120(1)30(2) R75IR4120(1)30(2)
250 160 1.5 9.0 17.0 32.0 27.5 100 50,000 150 18 10.6 7.34 35 75IR4150(1)40(2) R75IR4150(1)40(2)
250 160 1.8 9.0 17.0 32.0 27.5 100 50,000 180 18 8.8 8.05 35 75IR4180(1)40(2) R75IR4180(1)40(2)
250 160 2.2 11.0 20.0 32.0 27.5 100 50,000 220 18 7.2 9.38 31 75IR4220(1)50(2) R75IR4220(1)50(2)
250 160 2.7 11.0 20.0 32.0 27.5 100 50,000 270 18 8.8 8.49 31 75IR4270(1)40(2) R75IR4270(1)40(2)
250 160 3.3 13.0 22.0 32.0 27.5 100 50,000 330 18 7.2 9.75 29 75IR4330(1)40(2) R75IR4330(1)40(2)
250 160 3.3 24.0 15.0 32.0 27.5 100 50,000 330 18 7.2 10.09 27 75IR4330(1)L4(2) R75IR4330(1)L4(2)
250 160 3.9 13.0 22.0 32.0 27.5 100 50,000 390 18 6.1 10.60 29 75IR4390(1)40(2) R75IR4390(1)40(2)
250 160 3.9 24.0 15.0 32.0 27.5 100 50,000 390 18 6.1 10.97 27 75IR4390(1)L4(2) R75IR4390(1)L4(2)
250 160 4.7 13.0 25.0 32.0 27.5 100 50,000 470 18 5.1 11.91 28 75IR4470(1)50(2) R75IR4470(1)50(2)
250 160 5.6 14.0 28.0 32.0 27.5 100 50,000 560 18 4.3 13.41 26 75IR4560(1)40(2) R75IR4560(1)40(2)
250 160 6.8 18.0 33.0 32.0 27.5 100 50,000 680 18 7.0 11.14 23 75IR4680(1)40(2) R75IR4680(1)40(2)
250 160 8.2 18.0 33.0 32.0 27.5 100 50,000 820 18 5.8 12.24 23 75IR4820(1)40(2) R75IR4820(1)40(2)
250 160 10 22.0 37.0 32.0 27.5 100 50,000 1,000 18 4.8 14.20 21 75IR5100(1)40(2) R75IR5100(1)40(2)
250 160 12 22.0 37.0 32.0 27.5 100 50,000 1,200 18 4.0 15.56 21 75IR5120(1)40(2) R75IR5120(1)40(2)
250 160 2.7 11.0 22.0 41.5 37.5 40 20,000 108 20 8.8 9.14 27 75IW4270(1)40(2) R75IW4270(1)40(2)
250 160 311.0 22.0 41.5 37.5 40 20,000 120 20 8.0 9.63 27 75IW4300(1)40(2) R75IW4300(1)40(2)
VDC VAC Cap
Value
TH L Lead
Spacing
(S)
dV/dt
(V/µs) Max K0
(V2/µs)
Apk
nH mΩ Arms
(°C/W) KEMET Internal
Part Number Customer
Part Number
Lead
Length
2x 4 mm
at
100
kHz
at 100 kHz,
85°C
Dimensions Ipkr ESL ESR Irms max (*) Rth
Table 1 – Ratings & Part Number Reference cont.
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%
(3) K = 10%, M = 20%
(*) Irms value that leads to a ΔT of ≈ 20°C on the box surface > TBOX = TAMB + ΔT = 85°C + 20°C = 105°C
15© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4 mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
250 160 3.3 11.0 22.0 41.5 37.5 40 20,000 132 20 7.2 10.10 27 75IW4330(1)40(2) R75IW4330(1)40(2)
250 160 3.9 11.0 22.0 41.5 37.5 40 20,000 156 20 6.1 10.98 27 75IW4390(1)40(2) R75IW4390(1)40(2)
250 160 3.9 24.0 15.0 41.5 37.5 40 20,000 156 20 6.1 11.58 24 75IW4390(1)L4(2) R75IW4390(1)L4(2)
250 160 4.7 11.0 22.0 41.5 37.5 40 20,000 188 20 5.1 12.05 27 75IW4470(1)40(2) R75IW4470(1)40(2)
250 160 4.7 24.0 15.0 41.5 37.5 40 20,000 188 20 5.1 12.71 24 75IW4470(1)L4(2) R75IW4470(1)L4(2)
250 160 5.6 13.0 24.0 41.5 37.5 40 20,000 224 20 4.3 13.63 25 75IW4560(1)40(2) R75IW4560(1)40(2)
250 160 5.6 24.0 15.0 41.5 37.5 40 20,000 224 20 4.3 13.87 24 75IW4560(1)L4(2) R75IW4560(1)L4(2)
250 160 6.8 16.0 28.5 41.5 37.5 40 20,000 272 20 7.0 11.24 23 75IW4680(1)40(2) R75IW4680(1)40(2)
250 160 6.8 24.0 19.0 41.5 37.5 40 20,000 272 20 7.0 11.16 23 75IW4680(1)L4(2) R75IW4680(1)L4(2)
250 160 8.2 16.0 28.5 41.5 37.5 40 20,000 328 20 5.8 12.34 23 75IW4820(1)40(2) R75IW4820(1)40(2)
250 160 8.2 24.0 19.0 41.5 37.5 40 20,000 328 20 5.8 12.26 23 75IW4820(1)L4(2) R75IW4820(1)L4(2)
250 160 10 19.0 32.0 41.5 37.5 40 20,000 400 20 4.8 14.23 21 75IW5100(1)40(2) R75IW5100(1)40(2)
250 160 12 19.0 32.0 41.5 37.5 40 20,000 480 20 4.0 15.59 21 75IW5120(1)40(2) R75IW5120(1)40(2)
250 160 15 20.0 40.0 41.5 37.5 40 20,000 600 20 3.2 18.30 19 75IW5150(1)40(2) R75IW5150(1)40(2)
250 160 18 20.0 40.0 41.5 37.5 40 20,000 720 20 2.7 20.05 19 75IW5180(1)40(2) R75IW5180(1)40(2)
250 160 22 24.0 44.0 41.5 37.5 40 20,000 880 20 2.2 23.13 17 75IW5220(1)40(2) R75IW5220(1)40(2)
250 160 27 24.0 44.0 41.5 37.5 40 20,000 1,080 20 1.8 25.62 17 75IW5270(1)40(2) R75IW5270(1)40(2)
250 160 33 30.0 45.0 41.5 37.5 40 20,000 1,320 20 1.4 29.37 16 75IW5330(1)40(2) R75IW5330(1)40(2)
400 200 0.027 4.0 9.0 10.0 7.5 390 312,000 11 841.3 2.35 88 75MD2270(1)B0(2) R75MD2270(1)B0(2)
400 200 0.033 5.0 10.5 10.0 7.5 390 312,000 13 833.8 2.75 78 75MD2330(1)B0(2) R75MD2330(1)B0(2)
400 200 0.039 5.0 10.5 10.0 7.5 390 312,000 15 828.6 2.99 78 75MD2390(1)B0(2) R75MD2390(1)B0(2)
400 200 0.047 5.0 10.5 10.0 7.5 390 312,000 18 823.7 3.29 78 75MD2470(1)B0(2) R75MD2470(1)B0(2)
400 200 0.056 6.0 12.0 10.5 7.5 390 312,000 22 819.9 3.81 69 75MD2560(1)A0(2) R75MD2560(1)A0(2)
400 200 0.068 6.0 12.0 10.5 7.5 390 312,000 27 816.4 4.20 69 75MD2680(1)A0(2) R75MD2680(1)A0(2)
400 220 0.01 4.0 9.0 10.0 7.5 1,500 1,200,000 15 879.6 1.38 88 75MD2100(1)40(2) R75MD2100(1)40(2)
400 220 0.012 4.0 9.0 10.0 7.5 1,500 1,200,000 18 892.8 1.57 88 75MD2120(1)40(2) R75MD2120(1)40(2)
400 220 0.015 4.0 9.0 10.0 7.5 1,500 1,200,000 23 874.3 1.75 88 75MD2150(1)40(2) R75MD2150(1)40(2)
400 220 0.018 4.0 9.0 10.0 7.5 1,500 1,200,000 27 861.9 1.92 88 75MD2180(1)40(2) R75MD2180(1)40(2)
400 220 0.022 4.0 9.0 10.0 7.5 1,500 1,200,000 33 850.6 2.12 88 75MD2220(1)40(2) R75MD2220(1)40(2)
400 220 0.027 5.0 10.5 10.0 7.5 1,500 1,200,000 41 841.3 2.49 78 75MD2270(1)40(2) R75MD2270(1)40(2)
400 220 0.033 5.0 10.5 10.0 7.5 1,500 1,200,000 50 833.8 2.75 78 75MD2330(1)40(2) R75MD2330(1)40(2)
400 220 0.039 6.0 12.0 10.5 7.5 1,500 1,200,000 59 828.6 3.18 69 75MD2390(1)30(2) R75MD2390(1)30(2)
400 220 0.047 6.0 12.0 10.5 7.5 1,500 1,200,000 71 823.7 3.49 69 75MD2470(1)30(2) R75MD2470(1)30(2)
400 220 0.015 4.0 9.0 13.0 10.0 1,300 1,040,000 20 974.3 1.85 79 75ΜF2150(1)00(2) R75ΜF2150(1)00(2)
400 220 0.018 4.0 9.0 13.0 10.0 1,300 1,040,000 23 961.9 2.03 79 75ΜF2180(1)00(2) R75ΜF2180(1)00(2)
400 220 0.022 4.0 9.0 13.0 10.0 1,300 1,040,000 29 950.6 2.24 79 75ΜF2220(1)30(2) R75ΜF2220(1)30(2)
400 220 0.027 4.0 9.0 13.0 10.0 1,300 1,040,000 35 941.3 2.48 79 75ΜF2270(1)30(2) R75ΜF2270(1)30(2)
400 220 0.033 5.0 11.0 13.0 10.0 1,300 1,040,000 43 933.8 2.93 69 75ΜF2330(1)30(2) R75ΜF2330(1)30(2)
400 220 0.039 5.0 11.0 13.0 10.0 1,300 1,040,000 51 928.6 3.18 69 75ΜF2390(1)30(2) R75ΜF2390(1)30(2)
400 220 0.047 5.0 11.0 13.0 10.0 1,300 1,040,000 61 923.7 3.50 69 75ΜF2470(1)30(2) R75ΜF2470(1)30(2)
400 220 0.056 6.0 12.0 13.0 10.0 1,300 1,040,000 73 928.4 3.32 64 75ΜF2560(1)30(2) R75ΜF2560(1)30(2)
400 220 0.068 6.0 12.0 13.0 10.0 1,300 1,040,000 88 923.4 3.66 64 75ΜF2680(1)30(2) R75ΜF2680(1)30(2)
400 220 0.068 5.0 11.0 18.0 15.0 900 720,000 61 10 23.4 3.77 60 75MI2680(1)30(2) R75MI2680(1)30(2)
400 220 0.082 5.0 11.0 18.0 15.0 900 720,000 74 10 19.4 4.14 60 75MI2820(1)30(2) R75MI2820(1)30(2)
400 220 0.1 5.0 11.0 18.0 15.0 900 720,000 90 10 15.9 4.57 60 75MI3100(1)30(2) R75MI3100(1)30(2)
400 220 0.12 6.0 12.0 18.0 15.0 900 720,000 108 10 13.3 5.19 56 75MI3120(1)30(2) R75MI3120(1)30(2)
400 220 0.15 6.0 12.0 18.0 15.0 900 720,000 135 10 10.6 5.81 56 75MI3150(1)30(2) R75MI3150(1)30(2)
400 220 0.18 7.5 13.5 18.0 15.0 900 720,000 162 10 13.3 5.45 51 75MI3180(1)30(2) R75MI3180(1)30(2)
400 220 0.22 7.5 13.5 18.0 15.0 900 720,000 198 10 10.9 6.03 51 75MI3220(1)30(2) R75MI3220(1)30(2)
400 220 0.22 9.0 12.5 18.0 15.0 900 720,000 198 10 10.9 6.10 50 75MI3220(1)70(2) R75MI3220(1)70(2)
VDC VAC Cap
Value
TH L Lead
Spacing
(S)
dV/dt
(V/µs) Max K0
(V2/µs)
Apk
nH mΩ Arms
(°C/W) KEMET Internal
Part Number Customer
Part Number
Lead
Length
2x 4 mm
at
100
kHz
at 100 kHz,
85°C
Dimensions Ipkr ESL ESR Irms max (*) Rth
Table 1 – Ratings & Part Number Reference cont.
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%
(3) K = 10%, M = 20%
(*) Irms value that leads to a ΔT of ≈ 20°C on the box surface > TBOX = TAMB + ΔT = 85°C + 20°C = 105°C
16© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4 mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
400 220 0.27 8.5 14.5 18.0 15.0 900 720,000 243 10 17.7 4.87 48 75MI3270(1)30(2) R75MI3270(1)30(2)
400 220 0.27 9.0 12.5 18.0 15.0 900 720,000 243 10 17.7 4.77 50 75MI3270(1)70(2) R75MI3270(1)70(2)
400 220 0.33 8.5 14.5 18.0 15.0 900 720,000 297 10 14.5 5.38 48 75MI3330(1)40(2) R75MI3330(1)40(2)
400 220 0.33 10.0 16.0 18.0 15.0 900 720,000 297 10 14.5 5.60 44 75MI3330(1)30(2) R75MI3330(1)30(2)
400 220 0.33 13.0 12.0 18.0 15.0 900 720,000 297 10 14.5 5.55 45 75MI3330(1)70(2) R75MI3330(1)70(2)
400 220 0.39 10.0 16.0 18.0 15.0 900 720,000 351 10 12.2 6.09 44 75MI3390(1)30(2) R75MI3390(1)30(2)
400 220 0.47 10.0 16.0 18.0 15.0 900 720,000 423 10 10.2 6.68 44 75MI3470(1)30(2) R75MI3470(1)30(2)
400 220 0.56 11.0 19.0 18.0 15.0 900 720,000 504 10 8.5 7.63 40 75MI3560(1)30(2) R75MI3560(1)30(2)
400 220 0.68 11.0 19.0 18.0 15.0 900 720,000 612 10 7.0 8.41 40 75MI3680(1)30(2) R75MI3680(1)30(2)
400 220 0.15 6.0 15.0 26.5 22.5 300 240,000 45 16 18.0 5.05 43 75MN3150(1)30(2) R75MN3150(1)30(2)
400 220 0.18 6.0 15.0 26.5 22.5 300 240,000 54 16 15.0 5.54 43 75MN3180(1)30(2) R75MN3180(1)30(2)
400 220 0.22 6.0 15.0 26.5 22.5 300 240,000 66 16 12.3 6.12 43 75MN3220(1)30(2) R75MN3220(1)30(2)
400 220 0.27 6.0 15.0 26.5 22.5 300 240,000 81 16 11.8 6.25 43 75MN3270(1)30(2) R75MN3270(1)30(2)
400 220 0.33 6.0 15.0 26.5 22.5 300 240,000 99 16 9.6 6.91 43 75MN3330(1)30(2) R75MN3330(1)30(2)
400 220 0.39 7.0 16.0 26.5 22.5 300 240,000 117 16 10.2 6.91 41 75MN3390(1)30(2) R75MN3390(1)30(2)
400 220 0.47 7.0 16.0 26.5 22.5 300 240,000 141 16 8.5 7.59 41 75MN3470(1)30(2) R75MN3470(1)30(2)
400 220 0.56 8.5 17.0 26.5 22.5 300 240,000 168 16 11.4 6.77 38 75MN3560(1)30(2) R75MN3560(1)30(2)
400 220 0.68 10.0 18.5 26.5 22.5 300 240,000 204 16 9.4 7.73 36 75MN3680(1)30(2) R75MN3680(1)30(2)
400 220 0.82 10.0 18.5 26.5 22.5 300 240,000 246 16 9.7 7.59 36 75MN3820(1)30(2) R75MN3820(1)30(2)
400 220 111.0 20.0 26.5 22.5 300 240,000 300 16 8.0 8.60 34 75MN4100(1)30(2) R75MN4100(1)30(2)
400 220 1.2 11.0 20.0 26.5 22.5 300 240,000 360 16 13.3 6.66 34 75MN4120(1)40(2) R75MN4120(1)40(2)
400 220 1.2 13.0 22.0 26.5 22.5 300 240,000 360 16 13.3 6.93 31 75MN4120(1)30(2) R75MN4120(1)30(2)
400 220 1.5 13.0 22.0 26.5 22.5 300 240,000 450 16 10.6 7.75 31 75MN4150(1)30(2) R75MN4150(1)30(2)
400 220 2.2 14.5 29.5 26.5 22.5 300 240,000 660 16 7.2 10.07 27 75MN4220(1)30(2) R75MN4220(1)30(2)
400 220 0.56 9.0 17.0 32.0 27.5 130 104,000 73 18 11.4 7.10 35 75MR3560(1)30(2) R75MR3560(1)30(2)
400 220 0.68 9.0 17.0 32.0 27.5 130 104,000 88 18 9.4 7.82 35 75MR3680(1)30(2) R75MR3680(1)30(2)
400 220 0.82 9.0 17.0 32.0 27.5 130 104,000 107 18 9.7 7.68 35 75MR3820(1)30(2) R75MR3820(1)30(2)
400 220 111.0 20.0 32.0 27.5 130 104,000 130 18 8.0 8.95 31 75MR4100(1)40(2) R75MR4100(1)40(2)
400 220 1.2 11.0 20.0 32.0 27.5 130 104,000 156 18 13.3 6.93 31 75MR4120(1)30(2) R75MR4120(1)30(2)
400 220 1.2 24.0 15.0 32.0 27.5 130 104,000 156 18 13.3 7.45 27 75MR4120(1)L3(2) R75MR4120(1)L3(2)
400 220 1.5 13.0 22.0 32.0 27.5 130 104,000 195 18 10.6 8.05 29 75MR4150(1)30(2) R75MR4150(1)30(2)
400 220 1.8 13.0 22.0 32.0 27.5 130 104,000 234 18 8.8 8.82 29 75MR4180(1)30(2) R75MR4180(1)30(2)
400 220 1.8 24.0 15.0 32.0 27.5 130 104,000 234 18 8.8 9.13 27 75MR4180(1)L3(2) R75MR4180(1)L3(2)
400 220 2.2 13.0 25.0 32.0 27.5 130 104,000 286 18 7.2 9.98 28 75MR4220(1)40(2) R75MR4220(1)40(2)
400 220 2.7 14.0 28.0 32.0 27.5 130 104,000 351 18 8.8 9.31 26 75MR4270(1)30(2) R75MR4270(1)30(2)
400 220 3.3 18.0 33.0 32.0 27.5 130 104,000 429 18 7.2 10.98 23 75MR4330(1)30(2) R75MR4330(1)30(2)
400 220 3.9 18.0 33.0 32.0 27.5 130 104,000 507 18 6.1 11.93 23 75MR4390(1)30(2) R75MR4390(1)30(2)
400 220 4.7 22.0 37.0 32.0 27.5 130 104,000 611 18 5.1 13.77 21 75MR4470(1)30(2) R75MR4470(1)30(2)
400 220 5.6 22.0 37.0 32.0 27.5 130 104,000 728 18 4.3 15.03 21 75MR4560(1)30(2) R75MR4560(1)30(2)
400 220 1.2 11.0 22.0 41.5 37.5 70 56,000 84 20 13.3 7.4 6 27 75MW4120(1)30(2) R75MW4120(1)30(2)
400 220 1.5 11.0 22.0 41.5 37.5 70 56,000 105 20 10.6 8.34 27 75MW4150(1)30(2) R75MW4150(1)30(2)
400 220 1.8 11.0 22.0 41.5 37.5 70 56,000 126 20 8.8 9.14 27 75MW4180(1)30(2) R75MW4180(1)30(2)
400 220 2.2 11.0 22.0 41.5 37.5 70 56,000 154 20 7.2 10.10 27 75MW4220(1)30(2) R75MW4220(1)30(2)
400 220 2.7 13.0 24.0 41.5 37.5 70 56,000 189 20 8.8 9.46 25 75MW4270(1)30(2) R75MW4270(1)30(2)
400 220 2.7 24.0 15.0 41.5 37.5 70 56,000 189 20 8.8 9.63 24 75MW4270(1)L3(2) R75MW4270(1)L3(2)
400 220 3.3 16.0 28.5 41.5 37.5 70 56,000 231 20 7.2 11.07 23 75MW4330(1)30(2) R75MW4330(1)30(2)
400 220 3.3 24.0 19.0 41.5 37.5 70 56,000 231 20 7.2 11.00 23 75MW4330(1)L3(2) R75MW4330(1)L3(2)
400 220 3.9 16.0 28.5 41.5 37.5 70 56,000 273 20 6.1 12.04 23 75MW4390(1)30(2) R75MW4390(1)30(2)
400 220 3.9 24.0 19.0 41.5 37.5 70 56,000 273 20 6.1 11.95 23 75MW4390(1)L3(2) R75MW4390(1)L3(2)
400 220 4.7 19.0 32.0 41.5 37.5 70 56,000 329 20 5.1 13.80 21 75MW4470(1)30(2) R75MW4470(1)30(2)
VDC VAC Cap
Value
TH L Lead
Spacing
(S)
dV/dt
(V/µs) Max K0
(V2/µs)
Apk
nH mΩ Arms
(°C/W) KEMET Internal
Part Number Customer
Part Number
Lead
Length
2x 4 mm
at
100
kHz
at 100 kHz,
85°C
Dimensions Ipkr ESL ESR Irms max (*) Rth
Table 1 – Ratings & Part Number Reference cont.
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%
(3) K = 10%, M = 20%
(*) Irms value that leads to a ΔT of ≈ 20°C on the box surface > TBOX = TAMB + ΔT = 85°C + 20°C = 105°C
17© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4 mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
400 220 5.6 19.0 32.0 41.5 37.5 70 56,000 392 20 4.3 15.06 21 75MW4560(1)30(2) R75MW4560(1)30(2)
400 220 6.8 20.0 40.0 41.5 37.5 70 56,000 476 20 7.0 12.32 19 75MW4680(1)20(2) R75MW4680(1)20(2)
400 220 8.2 20.0 40.0 41.5 37.5 70 56,000 574 20 5.8 13.53 19 75MW4820(1)30(2) R75MW4820(1)30(2)
400 220 10 24.0 44.0 41.5 37.5 70 56,000 700 20 4.8 15.59 17 75MW5100(1)30(2) R75MW5100(1)30(2)
400 220 12 30.0 45.0 41.5 37.5 70 56,000 840 20 4.0 17.71 16 75MW5120(1)20(2) R75MW5120(1)20(2)
400 220 15 30.0 45.0 41.5 37.5 70 56,000 1,050 20 3.2 19.80 16 75MW5150(1)30(2) R75MW5150(1)30(2)
630 220 0.01 4.0 9.0 10.0 7.5 600 756,000 6 8 79.6 1.38 88 75PD2100(1)B0(2) R75PD2100(1)B0(2)
630 220 0.012 4.0 9.0 10.0 7.5 600 756,000 7 8 92.8 1.57 88 75PD2120(1)B0(2) R75PD2120(1)B0(2)
630 220 0.015 5.0 10.5 10.0 7.5 600 756,000 9 8 74.3 1.86 78 75PD2150(1)B0(2) R75PD2150(1)B0(2)
630 220 0.018 5.0 10.5 10.0 7.5 600 756,000 11 861.9 2.03 78 75PD2180(1)B0(2) R75PD2180(1)B0(2)
630 220 0.022 6.0 12.0 10.5 7.5 600 756,000 13 850.6 2.39 69 75PD2220(1)A0(2) R75PD2220(1)A0(2)
630 220 0.027 6.0 12.0 10.5 7.5 600 756,000 16 841.3 2.64 69 75PD2270(1)A0(2) R75PD2270(1)A0(2)
630 250 0.0033 4.0 9.0 10.0 7.5 2,400 3,024,000 8 8 241.1 0.52 88 75PD1330(1)40(2) R75PD1330(1)40(2)
630 250 0.0039 4.0 9.0 10.0 7.5 2,400 3,024,000 9 8 204.0 0.61 88 75PD1390(1)40(2) R75PD1390(1)40(2)
630 250 0.0047 4.0 9.0 10.0 7.5 2,400 3,024,000 11 8169.3 0.74 88 75PD1470(1)40(2) R75PD1470(1)40(2)
630 250 0.0056 4.0 9.0 10.0 7.5 2,400 3,024,000 13 8142.1 0.88 88 75PD1560(1)40(2) R75PD1560(1)40(2)
630 250 0.0068 4.0 9.0 10.0 7.5 2,400 3,024,000 16 8117.0 1.07 88 75PD1680(1)40(2) R75PD1680(1)40(2)
630 250 0.0082 4.0 9.0 10.0 7.5 2,400 3,024,000 20 897.0 1.29 88 75PD1820(1)40(2) R75PD1820(1)40(2)
630 250 0.01 5.0 10.5 10.0 7.5 2,400 3,024,000 24 879.6 1.57 78 75PD2100(1)40(2) R75PD2100(1)40(2)
630 250 0.012 5.0 10.5 10.0 7.5 2,400 3,024,000 29 892.8 1.66 78 75PD2120(1)40(2) R75PD2120(1)40(2)
630 250 0.015 6.0 12.0 10.5 7.5 2,400 3,024,000 36 874.3 1.97 69 75PD2150(1)30(2) R75PD2150(1)30(2)
630 250 0.018 6.0 12.0 10.5 7.5 2,400 3,024,000 43 861.9 2.16 69 75PD2180(1)30(2) R75PD2180(1)30(2)
630 250 0.001 4.0 9.0 13.0 10.0 2,000 2,520,000 2 9 795.8 0.16 79 75PF1100(1)01(2) R75PF1100(1)01(2)
630 250 0.0012 4.0 9.0 13.0 10.0 2,000 2,520,000 2 9 663.1 0.19 79 75PF1120(1)01(2) R75PF1120(1)01(2)
630 250 0.0015 4.0 9.0 13.0 10.0 2,000 2,520,000 3 9 530.5 0.24 79 75PF1150(1)01(2) R75PF1150(1)01(2)
630 250 0.0018 4.0 9.0 13.0 10.0 2,000 2,520,000 4 9 442.1 0.28 79 75PF1180(1)01(2) R75PF1180(1)01(2)
630 250 0.0022 4.0 9.0 13.0 10.0 2,000 2,520,000 4 9 361.7 0.35 79 75PF1220(1)01(2) R75PF1220(1)01(2)
630 250 0.0027 4.0 9.0 13.0 10.0 2,000 2,520,000 5 9 294.7 0.42 79 75PF1270(1)01(2) R75PF1270(1)01(2)
630 250 0.0033 4.0 9.0 13.0 10.0 2,000 2,520,000 7 9 241.1 0.52 79 75PF1330(1)01(2) R75PF1330(1)01(2)
630 250 0.0039 4.0 9.0 13.0 10.0 2,000 2,520,000 8 9 204.0 0.61 79 75PF1390(1)01(2) R75PF1390(1)01(2)
630 250 0.0047 4.0 9.0 13.0 10.0 2,000 2,520,000 9 9 169.3 0.74 79 75PF1470(1)00(2) R75PF1470(1)00(2)
630 250 0.0056 4.0 9.0 13.0 10.0 2,000 2,520,000 11 9142.1 0.88 79 75PF1560(1)00(2) R75PF1560(1)00(2)
630 250 0.0068 4.0 9.0 13.0 10.0 2,000 2,520,000 14 9117.0 1.07 79 75PF1680(1)00(2) R75PF1680(1)00(2)
630 250 0.0082 4.0 9.0 13.0 10.0 2,000 2,520,000 16 997.0 1.29 79 75PF1820(1)00(2) R75PF1820(1)00(2)
630 250 0.01 4.0 9.0 13.0 10.0 2,000 2,520,000 20 979.6 1.57 79 75PF2100(1)30(2) R75PF2100(1)30(2)
630 250 0.012 4.0 9.0 13.0 10.0 2,000 2,520,000 24 992.8 1.66 79 75PF2120(1)30(2) R75PF2120(1)30(2)
630 250 0.015 5.0 11.0 13.0 10.0 2,000 2,520,000 30 974.3 1.97 69 75PF2150(1)30(2) R75PF2150(1)30(2)
630 250 0.018 5.0 11.0 13.0 10.0 2,000 2,520,000 36 961.9 2.16 69 75PF2180(1)30(2) R75PF2180(1)30(2)
630 250 0.022 6.0 12.0 13.0 10.0 2,000 2,520,000 44 950.6 2.49 64 75PF2220(1)30(2) R75PF2220(1)30(2)
630 250 0.027 5.0 11.0 18.0 15.0 1,000 1,260,000 27 10 41.3 2.84 60 75PI2270(1)00(2) R75PI2270(1)00(2)
630 250 0.033 5.0 11.0 18.0 15.0 1,000 1,260,000 33 10 33.8 3.14 60 75PI2330(1)00(2) R75PI2330(1)00(2)
630 250 0.039 5.0 11.0 18.0 15.0 1,000 1,260,000 39 10 28.6 3.41 60 75PI2390(1)30(2) R75PI2390(1)30(2)
630 250 0.047 5.0 11.0 18.0 15.0 1,000 1,260,000 47 10 23.7 3.74 60 75PI2470(1)30(2) R75PI2470(1)30(2)
630 250 0.056 5.0 11.0 18.0 15.0 1,000 1,260,000 56 10 28.4 3.42 60 75PI2560(1)30(2) R75PI2560(1)30(2)
630 250 0.068 6.0 12.0 18.0 15.0 1,000 1,260,000 68 10 23.4 3.91 56 75PI2680(1)30(2) R75PI2680(1)30(2)
630 250 0.082 6.0 12.0 18.0 15.0 1,000 1,260,000 82 10 19.4 4.29 56 75PI2820(1)30(2) R75PI2820(1)30(2)
630 250 0.1 7.5 13.5 18.0 15.0 1,000 1,260,000 100 10 15.9 4.98 51 75PI3100(1)30(2) R75PI3100(1)30(2)
630 250 0.1 9.0 12.5 18.0 15.0 1,000 1,260,000 100 10 15.9 5.03 50 75PI3100(1)70(2) R75PI3100(1)70(2)
630 250 0.12 7.5 13.5 18.0 15.0 1,000 1,260,000 120 10 13.3 5.45 51 75PI3120(1)30(2) R75PI3120(1)30(2)
630 250 0.12 9.0 12.5 18.0 15.0 1,000 1,260,000 120 10 13.3 5.51 50 75PI3120(1)70(2) R75PI3120(1)70(2)
VDC VAC Cap
Value
TH L Lead
Spacing
(S)
dV/dt
(V/µs) Max K0
(V2/µs)
Apk
nH mΩ Arms
(°C/W) KEMET Internal
Part Number Customer
Part Number
Lead
Length
2x 4 mm
at
100
kHz
at 100 kHz,
85°C
Dimensions Ipkr ESL ESR Irms max (*) Rth
Table 1 – Ratings & Part Number Reference cont.
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%
(3) K = 10%, M = 20%
(*) Irms value that leads to a ΔT of ≈ 20°C on the box surface > TBOX = TAMB + ΔT = 85°C + 20°C = 105°C
18© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4 mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
630 250 0.15 8.5 14.5 18.0 15.0 1,000 1,260,000 150 10 10.6 6.28 48 75PI3150(1)30(2) R75PI3150(1)30(2)
630 250 0.15 13.0 12.0 18.0 15.0 1,000 1,260,000 150 10 10.6 6.48 45 75PI3150(1)70(2) R75PI3150(1)70(2)
630 250 0.18 10.0 16.0 18.0 15.0 1,000 1,260,000 180 10 13.3 5.85 44 75PI3180(1)30(2) R75PI3180(1)30(2)
630 250 0.18 13.0 12.0 18.0 15.0 1,000 1,260,000 180 10 13.3 5.80 45 75PI3180(1)70(2) R75PI3180(1)70(2)
630 250 0.22 10.0 16.0 18.0 15.0 1,000 1,260,000 220 10 10.9 6.47 44 75PI3220(1)30(2) R75PI3220(1)30(2)
630 250 0.27 11.0 19.0 18.0 15.0 1,000 1,260,000 270 10 17.7 5.30 40 75PI3270(1)30(2) R75PI3270(1)30(2)
630 250 0.33 11.0 19.0 18.0 15.0 1,000 1,260,000 330 10 14.5 5.86 40 75PI3330(1)30(2) R75PI3330(1)30(2)
630 250 0.39 11.0 19.0 18.0 15.0 1,000 1,260,000 390 10 12.2 6.37 40 75PI3390(1)30(2) R75PI3390(1)30(2)
630 250 0.082 6.0 15.0 26.5 22.5 400 504,000 33 16 33.0 3.74 43 75PN2820(1)30(2) R75PN2820(1)30(2)
630 250 0.1 6.0 15.0 26.5 22.5 400 504,000 40 16 27.1 4.13 43 75PN3100(1)30(2) R75PN3100(1)30(2)
630 250 0.12 6.0 15.0 26.5 22.5 400 504,000 48 16 22.5 4.52 43 75PN3120(1)30(2) R75PN3120(1)30(2)
630 250 0.15 6.0 15.0 26.5 22.5 400 504,000 60 16 18.0 5.05 43 75PN3150(1)30(2) R75PN3150(1)30(2)
630 250 0.18 7.0 16.0 26.5 22.5 400 504,000 72 16 15.0 5.69 41 75PN3180(1)30(2) R75PN3180(1)30(2)
630 250 0.22 7.0 16.0 26.5 22.5 400 504,000 88 16 12.3 6.30 41 75PN3220(1)30(2) R75PN3220(1)30(2)
630 250 0.27 8.5 17.0 26.5 22.5 400 504,000 108 16 11.8 6.65 38 75PN3270(1)30(2) R75PN3270(1)30(2)
630 250 0.33 10.0 18.5 26.5 22.5 400 504,000 132 16 9.6 7.61 36 75PN3330(1)30(2) R75PN3330(1)30(2)
630 250 0.39 10.0 18.5 26.5 22.5 400 504,000 156 16 10.2 7.40 36 75PN3390(1)30(2) R75PN3390(1)30(2)
630 250 0.47 11.0 20.0 26.5 22.5 400 504,000 188 16 8.5 8.34 34 75PN3470(1)30(2) R75PN3470(1)30(2)
630 250 0.56 11.0 20.0 26.5 22.5 400 504,000 224 16 11.4 7.20 34 75PN3560(1)30(2) R75PN3560(1)30(2)
630 250 0.68 13.0 22.0 26.5 22.5 400 504,000 272 16 9.4 8.25 31 75PN3680(1)30(2) R75PN3680(1)30(2)
630 250 114.5 29.5 26.5 22.5 400 504,000 400 16 8.0 9.60 27 75PN4100(1)30(2) R75PN4100(1)30(2)
630 250 1.2 14.5 29.5 26.5 22.5 400 504,000 480 16 13.3 7.4 4 27 75PN4120(1)30(2) R75PN4120(1)30(2)
630 250 0.39 9.0 17.0 32.0 27.5 180 226,800 70 18 10.2 7.49 35 75PR3390(1)30(2) R75PR3390(1)30(2)
630 250 0.47 9.0 17.0 32.0 27.5 180 226,800 85 18 8.5 8.22 35 75PR3470(1)40(2) R75PR3470(1)40(2)
630 250 0.56 11.0 20.0 32.0 27.5 180 226,800 101 18 11.4 7.49 31 75PR3560(1)30(2) R75PR3560(1)30(2)
630 250 0.68 11.0 20.0 32.0 27.5 180 226,800 122 18 9.4 8.25 31 75PR3680(1)30(2) R75PR3680(1)30(2)
630 250 0.68 24.0 15.0 32.0 27.5 180 226,800 122 18 9.4 8.87 27 75PR3680(1)L3(2) R75PR3680(1)L3(2)
630 250 0.82 13.0 22.0 32.0 27.5 180 226,800 148 18 9.7 8.42 29 75PR3820(1)30(2) R75PR3820(1)30(2)
630 250 113.0 22.0 32.0 27.5 180 226,800 180 18 8.0 9.30 29 75PR4100(1)30(2) R75PR4100(1)30(2)
630 250 124.0 15.0 32.0 27.5 180 226,800 180 18 8.0 9.62 27 75PR4100(1)L3(2) R75PR4100(1)L3(2)
630 250 1.2 14.0 28.0 32.0 27.5 180 226,800 216 18 13.3 7.60 26 75PR4120(1)40(2) R75PR4120(1)40(2)
630 250 1.5 14.0 28.0 32.0 27.5 180 226,800 270 18 10.6 8.50 26 75PR4150(1)30(2) R75PR4150(1)30(2)
630 250 1.8 18.0 33.0 32.0 27.5 180 226,800 324 18 8.8 9.93 23 75PR4180(1)30(2) R75PR4180(1)30(2)
630 250 2.2 18.0 33.0 32.0 27.5 180 226,800 396 18 7.2 10.98 23 75PR4220(1)30(2) R75PR4220(1)30(2)
630 250 2.7 22.0 37.0 32.0 27.5 180 226,800 486 18 8.8 10.44 21 75PR4270(1)30(2) R75PR4270(1)30(2)
630 250 3.3 22.0 37.0 32.0 27.5 180 226,800 594 18 7.2 11.54 21 75PR4330(1)30(2) R75PR4330(1)30(2)
630 250 0.68 11.0 22.0 41.5 37.5 90 113,400 61 20 9.4 8.88 27 75PW3680(1)30(2) R75PW3680(1)30(2)
630 250 0.82 11.0 22.0 41.5 37.5 90 113,400 74 20 9.7 8.72 27 75PW3820(1)30(2) R75PW3820(1)30(2)
630 250 111.0 22.0 41.5 37.5 90 113,400 90 20 8.0 9.63 27 75PW4100(1)30(2) R75PW4100(1)30(2)
630 250 1.2 13.0 24.0 41.5 37.5 90 113,400 108 20 13.3 7.73 25 75PW4120(1)30(2) R75PW4120(1)30(2)
630 250 1.5 13.0 24.0 41.5 37.5 90 113,400 135 20 10.6 8.64 25 75PW4150(1)30(2) R75PW4150(1)30(2)
630 250 1.5 24.0 15.0 41.5 37.5 90 113,400 135 20 10.6 8.79 24 75PW4150(1)L3(2) R75PW4150(1)L3(2)
630 250 1.8 16.0 28.5 41.5 37.5 90 113,400 162 20 8.8 10.02 23 75PW4180(1)30(2) R75PW4180(1)30(2)
630 250 2.2 16.0 28.5 41.5 37.5 90 113,400 198 20 7.2 11.07 23 75PW4220(1)30(2) R75PW4220(1)30(2)
630 250 2.2 24.0 19.0 41.5 37.5 90 113,400 198 20 7.2 11.00 23 75PW4220(1)L3(2) R75PW4220(1)L3(2)
630 250 2.7 19.0 32.0 41.5 37.5 90 113,400 243 20 8.8 10.46 21 75PW4270(1)30(2) R75PW4270(1)30(2)
630 250 3.3 19.0 32.0 41.5 37.5 90 113,400 297 20 7.2 11.56 21 75PW4330(1)30(2) R75PW4330(1)30(2)
630 250 3.9 20.0 40.0 41.5 37.5 90 113,400 351 20 6.1 13.20 19 75PW4390(1)30(2) R75PW4390(1)30(2)
630 250 4.7 20.0 40.0 41.5 37.5 90 113,400 423 20 5.1 14.49 19 75PW4470(1)30(2) R75PW4470(1)30(2)
630 250 5.6 24.0 44.0 41.5 37.5 90 113,400 504 20 4.3 16.50 17 75PW4560(1)30(2) R75PW4560(1)30(2)
VDC VAC Cap
Value
TH L Lead
Spacing
(S)
dV/dt
(V/µs) Max K0
(V2/µs)
Apk
nH mΩ Arms
(°C/W) KEMET Internal
Part Number Customer
Part Number
Lead
Length
2x 4 mm
at
100
kHz
at 100 kHz,
85°C
Dimensions Ipkr ESL ESR Irms max (*) Rth
Table 1 – Ratings & Part Number Reference cont.
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%
(3) K = 10%, M = 20%
(*) Irms value that leads to a ΔT of ≈ 20°C on the box surface > TBOX = TAMB + ΔT = 85°C + 20°C = 105°C
19© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4 mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
630 250 6.8 30.0 45.0 41.5 37.5 90 113,400 612 20 7.0 13.33 16 75PW4680(1)20(2) R75PW4680(1)20(2)
630 250 8.2 30.0 45.0 41.5 37.5 90 113,400 738 20 5.8 14.64 16 75PW4820(1)30(2) R75PW4820(1)30(2)
1000 250 0.01 5.0 11.0 18.0 15.0 2,000 4,000,000 20 10 79.6 1.57 60 75QI2100(1)00(2) R75QI2100(1)00(2)
1000 250 0.012 5.0 11.0 18.0 15.0 2,000 4,000,000 24 10 92.8 1.88 60 75QI2120(1)00(2) R75QI2120(1)00(2)
1000 250 0.015 5.0 11.0 18.0 15.0 2,000 4,000,000 30 10 74.3 2.11 60 75QI2150(1)00(2) R75QI2150(1)00(2)
1000 250 0.018 5.0 11.0 18.0 15.0 2,000 4,000,000 36 10 61.9 2.32 60 75QI2180(1)00(2) R75QI2180(1)00(2)
1000 250 0.022 5.0 11.0 18.0 15.0 2,000 4,000,000 44 10 50.6 2.56 60 75QI2220(1)00(2) R75QI2220(1)00(2)
1000 250 0.027 6.0 12.0 18.0 15.0 2,000 4,000,000 54 10 41.3 2.94 56 75QI2270(1)00(2) R75QI2270(1)00(2)
1000 250 0.033 6.0 12.0 18.0 15.0 2,000 4,000,000 66 10 33.8 3.25 56 75QI2330(1)00(2) R75QI2330(1)00(2)
1000 250 0.039 6.0 12.0 18.0 15.0 2,000 4,000,000 78 10 28.6 3.54 56 75QI2390(1)00(2) R75QI2390(1)00(2)
1000 250 0.047 7.5 13.5 18.0 15.0 2,000 4,000,000 94 10 23.7 4.08 51 75QI2470(1)00(2) R75QI2470(1)00(2)
1000 250 0.047 9.0 12.5 18.0 15.0 2,000 4,000,000 94 10 23.7 4.12 50 75QI2470(1)60(2) R75QI2470(1)60(2)
1000 250 0.056 8.5 14.5 18.0 15.0 2,000 4,000,000 112 10 28.4 3.84 48 75QI2560(1)00(2) R75QI2560(1)00(2)
1000 250 0.056 9.0 12.5 18.0 15.0 2,000 4,000,000 112 10 28.4 3.77 50 75QI2560(1)60(2) R75QI2560(1)60(2)
1000 250 0.068 8.5 14.5 18.0 15.0 2,000 4,000,000 136 10 23.4 4.23 48 75QI2680(1)00(2) R75QI2680(1)00(2)
1000 250 0.068 13.0 12.0 18.0 15.0 2,000 4,000,000 136 10 23.4 4.36 45 75QI2680(1)60(2) R75QI2680(1)60(2)
1000 250 0.082 10.0 16.0 18.0 15.0 2,000 4,000,000 164 10 19.4 4.83 44 75QI2820(1)00(2) R75QI2820(1)00(2)
1000 250 0.1 10.0 16.0 18.0 15.0 2,000 4,000,000 200 10 15.9 5.34 44 75QI3100(1)30(2) R75QI3100(1)30(2)
1000 250 0.1 11.0 19.0 18.0 15.0 2,000 4,000,000 200 10 15.9 5.59 40 75QI3100(1)00(2) R75QI3100(1)00(2)
1000 250 0.12 11.0 19.0 18.0 15.0 2,000 4,000,000 240 10 13.3 6.12 40 75QI3120(1)00(2) R75QI3120(1)00(2)
1000 250 0.15 11.0 19.0 18.0 15.0 2,000 4,000,000 300 10 10.6 6.84 40 75QI3150(1)00(2) R75QI3150(1)00(2)
1000 250 0.033 6.0 15.0 26.5 22.5 800 1,600,000 26 16 72.3 2.52 43 75QN2330(1)00(2) R75QN2330(1)00(2)
1000 250 0.047 6.0 15.0 26.5 22.5 800 1,600,000 38 16 50.8 3.01 43 75QN2470(1)00(2) R75QN2470(1)00(2)
1000 250 0.056 6.0 15.0 26.5 22.5 800 1,600,000 45 16 48.3 3.09 43 75QN2560(1)00(2) R75QN2560(1)00(2)
1000 250 0.068 6.0 15.0 26.5 22.5 800 1,600,000 54 16 39.8 3.40 43 75QN2680(1)00(2) R75QN2680(1)00(2)
1000 250 0.082 7.0 16.0 26.5 22.5 800 1,600,000 66 16 33.0 3.84 41 75QN2820(1)00(2) R75QN2820(1)00(2)
1000 250 0.1 7.0 16.0 26.5 22.5 800 1,600,000 80 16 27.1 4.24 41 75QN3100(1)00(2) R75QN3100(1)00(2)
1000 250 0.12 8.5 17.0 26.5 22.5 800 1,600,000 96 16 22.5 4.81 38 75QN3120(1)00(2) R75QN3120(1)00(2)
1000 250 0.15 10.0 18.5 26.5 22.5 800 1,600,000 120 16 18.0 5.57 36 75QN3150(1)00(2) R75QN3150(1)00(2)
1000 250 0.18 10.0 18.5 26.5 22.5 800 1,600,000 144 16 15.0 6.10 36 75QN3180(1)00(2) R75QN3180(1)00(2)
1000 250 0.22 11.0 20.0 26.5 22.5 800 1,600,000 176 16 12.3 6.92 34 75QN3220(1)00(2) R75QN3220(1)00(2)
1000 250 0.33 13.0 22.0 26.5 22.5 800 1,600,000 264 16 9.6 8.13 31 75QN3330(1)00(2) R75QN3330(1)00(2)
1000 250 0.47 14.5 29.5 26.5 22.5 800 1,600,000 376 16 8.5 9.31 27 75QN3470(1)00(2) R75QN3470(1)00(2)
1000 250 0.56 14.5 29.5 26.5 22.5 800 1,600,000 448 16 11.4 8.03 27 75QN3560(1)00(2) R75QN3560(1)00(2)
1000 250 0.15 9.0 17.0 32.0 27.5 350 700,000 53 18 18.0 5.63 35 75QR3150(1)00(2) R75QR3150(1)00(2)
1000 250 0.18 9.0 17.0 32.0 27.5 350 700,000 63 18 15.0 6.17 35 75QR3180(1)00(2) R75QR3180(1)00(2)
1000 250 0.22 11.0 20.0 32.0 27.5 350 700,000 77 18 12.3 7.20 31 75QR3220(1)10(2) R75QR3220(1)10(2)
1000 250 0.27 11.0 20.0 32.0 27.5 350 700,000 95 18 11.8 7.35 31 75QR3270(1)00(2) R75QR3270(1)00(2)
1000 250 0.33 11.0 20.0 32.0 27.5 350 700,000 116 18 9.6 8.13 31 75QR3330(1)30(2) R75QR3330(1)30(2)
1000 250 0.33 13.0 22.0 32.0 27.5 350 700,000 116 18 9.6 8.44 29 75QR3330(1)00(2) R75QR3330(1)00(2)
1000 250 0.33 24.0 15.0 32.0 27.5 350 700,000 116 18 9.6 8.74 27 75QR3330(1)L0(2) R75QR3330(1)L0(2)
1000 250 0.39 13.0 22.0 32.0 27.5 350 700,000 137 18 10.2 8.21 29 75QR3390(1)00(2) R75QR3390(1)00(2)
1000 250 0.39 24.0 15.0 32.0 27.5 350 700,000 137 18 10.2 8.50 27 75QR3390(1)L0(2) R75QR3390(1)L0(2)
1000 250 0.47 13.0 25.0 32.0 27.5 350 700,000 165 18 8.5 9.23 28 75QR3470(1)10(2) R75QR3470(1)10(2)
1000 250 0.56 14.0 28.0 32.0 27.5 350 700,000 196 18 11.4 8.21 26 75QR3560(1)10(2) R75QR3560(1)10(2)
1000 250 0.68 18.0 33.0 32.0 27.5 350 700,000 238 18 9.4 9.65 23 75QR3680(1)00(2) R75QR3680(1)00(2)
1000 250 0.82 18.0 33.0 32.0 27.5 350 700,000 287 18 9.7 9.48 23 75QR3820(1)00(2) R75QR3820(1)00(2)
1000 250 118.0 33.0 32.0 27.5 350 700,000 350 18 8.0 10.47 23 75QR4100(1)00(2) R75QR4100(1)00(2)
1000 250 1.2 22.0 37.0 32.0 27.5 350 700,000 420 18 13.3 8.52 21 75QR4120(1)00(2) R75QR4120(1)00(2)
1000 250 1.5 22.0 37.0 32.0 27.5 350 700,000 525 18 10.6 9.53 21 75QR4150(1)00(2) R75QR4150(1)00(2)
VDC VAC Cap
Value
TH L Lead
Spacing
(S)
dV/dt
(V/µs) Max K0
(V2/µs)
Apk
nH mΩ Arms
(°C/W) KEMET Internal
Part Number Customer
Part Number
Lead
Length
2x 4 mm
at
100
kHz
at 100 kHz,
85°C
Dimensions Ipkr ESL ESR Irms max (*) Rth
Table 1 – Ratings & Part Number Reference cont.
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%
(3) K = 10%, M = 20%
(*) Irms value that leads to a ΔT of ≈ 20°C on the box surface > TBOX = TAMB + ΔT = 85°C + 20°C = 105°C
20© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4 mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
1000 250 0.27 11.0 22.0 41.5 37.5 200 400,000 54 20 11.8 7.91 27 75QW3270(1)00(2) R75QW3270(1)00(2)
1000 250 0.33 11.0 22.0 41.5 37.5 200 400,000 66 20 9.6 8.75 27 75QW3330(1)00(2) R75QW3330(1)00(2)
1000 250 0.39 11.0 22.0 41.5 37.5 200 400,000 78 20 10.2 8.50 27 75QW3390(1)00(2) R75QW3390(1)00(2)
1000 250 0.47 11.0 22.0 41.5 37.5 200 400,000 94 20 8.5 9.34 27 75QW3470(1)00(2) R75QW3470(1)00(2)
1000 250 0.56 13.0 24.0 41.5 37.5 200 400,000 112 20 11.4 8.35 25 75QW3560(1)00(2) R75QW3560(1)00(2)
1000 250 0.68 13.0 24.0 41.5 37.5 200 400,000 136 20 9.4 9.20 25 75QW3680(1)00(2) R75QW3680(1)00(2)
1000 250 0.68 24.0 15.0 41.5 37.5 200 400,000 136 20 9.4 9.36 24 75QW3680(1)L0(2) R75QW3680(1)L0(2)
1000 250 0.82 16.0 28.5 41.5 37.5 200 400,000 164 20 9.7 9.56 23 75QW3820(1)00(2) R75QW3820(1)00(2)
1000 250 0.82 24.0 19.0 41.5 37.5 200 400,000 164 20 9.7 9.49 23 75QW3820(1)L0(2) R75QW3820(1)L0(2)
1000 250 116.0 28.5 41.5 37.5 200 400,000 200 20 8.0 10.56 23 75QW4100(1)00(2) R75QW4100(1)00(2)
1000 250 1.2 19.0 32.0 41.5 37.5 200 400,000 240 20 13.3 8.54 21 75QW4120(1)00(2) R75QW4120(1)00(2)
1000 250 1.5 19.0 32.0 41.5 37.5 200 400,000 300 20 10.6 9.55 21 75QW4150(1)00(2) R75QW4150(1)00(2)
1000 250 1.8 20.0 40.0 41.5 37.5 200 400,000 360 20 8.8 10.98 19 75QW4180(1)00(2) R75QW4180(1)00(2)
1000 250 2.2 20.0 40.0 41.5 37.5 200 400,000 440 20 7.2 12.14 19 75QW4220(1)00(2) R75QW4220(1)00(2)
1000 250 2.2 24.0 44.0 41.5 37.5 200 400,000 440 20 7.2 12.67 17 75QW4220(1)30(2) R75QW4220(1)30(2)
1000 250 2.7 24.0 44.0 41.5 37.5 200 400,000 540 20 8.8 11.46 17 75QW4270(1)00(2) R75QW4270(1)00(2)
1000 250 3.3 30.0 45.0 41.5 37.5 200 400,000 660 20 7.2 13.13 16 75QW4330(1)00(2) R75QW4330(1)00(2)
1000 250 3.9 30.0 45.0 41.5 37.5 200 400,000 780 20 6.1 14.28 16 75QW4390(1)00(2) R75QW4390(1)00(2)
1000 400 0.00022 3.0 8.0 10.0 7.5 4,000 8,000,000 1 8 3617.2 0.06 98 75QD0220(1)30(2) R75QD0220(1)30(2)
1000 400 0.00027 3.0 8.0 10.0 7.5 4,000 8,000,000 1 8 2947.3 0.07 98 75QD0270(1)30(2) R75QD0270(1)30(2)
1000 400 0.00033 3.0 8.0 10.0 7.5 4,000 8,000,000 1 8 2411.4 0.08 98 75QD0330(1)30(2) R75QD0330(1)30(2)
1000 400 0.00039 3.0 8.0 10.0 7.5 4,000 8,000,000 2 8 2040.4 0.10 98 75QD0390(1)30(2) R75QD0390(1)30(2)
1000 400 0.00047 3.0 8.0 10.0 7.5 4,000 8,000,000 2 8 1693.1 0.12 98 75QD0470(1)30(2) R75QD0470(1)30(2)
1000 400 0.00056 3.0 8.0 10.0 7.5 4,000 8,000,000 2 8 1421.0 0.14 98 75QD0560(1)30(2) R75QD0560(1)30(2)
1000 400 0.00068 3.0 8.0 10.0 7.5 4,000 8,000,000 3 8 1170.3 0.17 98 75QD0680(1)30(2) R75QD0680(1)30(2)
1000 400 0.00082 3.0 8.0 10.0 7.5 4,000 8,000,000 3 8 970.5 0.21 98 75QD0820(1)30(2) R75QD0820(1)30(2)
1000 400 0.001 3.0 8.0 10.0 7.5 4,000 8,000,000 4 8 795.8 0.25 98 75QD1100(1)30(2) R75QD1100(1)30(2)
1000 400 0.0012 4.0 9.0 10.0 7.5 4,000 8,000,000 5 8 663.1 0.30 88 75QD1120(1)30(2) R75QD1120(1)30(2)
1000 400 0.0015 4.0 9.0 10.0 7.5 4,000 8,000,000 6 8 530.5 0.38 88 75QD1150(1)30(2) R75QD1150(1)30(2)
1000 400 0.0018 4.0 9.0 10.0 7.5 4,000 8,000,000 7 8 442.1 0.45 88 75QD1180(1)30(2) R75QD1180(1)30(2)
1000 400 0.0022 4.0 9.0 10.0 7.5 4,000 8,000,000 9 8 361.7 0.55 88 75QD1220(1)30(2) R75QD1220(1)30(2)
1000 400 0.0027 4.0 9.0 10.0 7.5 4,000 8,000,000 11 8294.7 0.68 88 75QD1270(1)30(2) R75QD1270(1)30(2)
1000 400 0.0033 4.0 9.0 10.0 7.5 4,000 8,000,000 13 8241.1 0.83 88 75QD1330(1)30(2) R75QD1330(1)30(2)
1000 400 0.0039 5.0 10.5 10.0 7.5 4,000 8,000,000 16 8204.0 0.98 78 75QD1390(1)30(2) R75QD1390(1)30(2)
1000 400 0.0047 5.0 10.5 10.0 7.5 4,000 8,000,000 19 8169.3 1.18 78 75QD1470(1)30(2) R75QD1470(1)30(2)
1000 400 0.0056 5.0 10.5 10.0 7.5 4,000 8,000,000 22 8142.1 1.34 78 75QD1560(1)30(2) R75QD1560(1)30(2)
1000 400 0.0068 6.0 12.0 10.5 7.5 4,000 8,000,000 27 8117.0 1.57 69 75QD1680(1)30(2) R75QD1680(1)30(2)
1000 400 0.0082 6.0 12.0 10.5 7.5 4,000 8,000,000 33 897.0 1.72 69 75QD1820(1)30(2) R75QD1820(1)30(2)
1250 450 0.0022 4.0 9.0 13.0 10.0 6,000 15,000,000 13 9361.7 0.62 79 75RF1220(1)40(2) R75RF1220(1)40(2)
1250 450 0.0027 4.0 9.0 13.0 10.0 6,000 15,000,000 16 9294.7 0.76 79 75RF1270(1)40(2) R75RF1270(1)40(2)
1250 450 0.0033 4.0 9.0 13.0 10.0 6,000 15,000,000 20 9241.1 0.93 79 75RF1330(1)40(2) R75RF1330(1)40(2)
1250 450 0.0047 5.0 11.0 13.0 10.0 6,000 15,000,000 28 9169.3 1.31 69 75RF1470(1)40(2) R75RF1470(1)40(2)
1250 450 0.0056 5.0 11.0 13.0 10.0 6,000 15,000,000 34 9142.1 1.43 69 75RF1560(1)40(2) R75RF1560(1)40(2)
1250 450 0.0068 6.0 12.0 13.0 10.0 6,000 15,000,000 41 9117.0 1.64 64 75RF1680(1)40(2) R75RF1680(1)40(2)
1250 450 0.0082 6.0 12.0 13.0 10.0 6,000 15,000,000 49 997.0 1.80 64 75RF1820(1)40(2) R75RF1820(1)40(2)
1250 450 0.01 6.0 12.0 13.0 10.0 6,000 15,000,000 60 979.6 1.98 64 75RF2100(1)40(2) R75RF2100(1)40(2)
1250 600 0.0068 5.0 11.0 18.0 15.0 3,300 8,250,000 22 10 117.0 1.68 60 75RI1680(1)30(2) R75RI1680(1)30(2)
1250 600 0.0082 5.0 11.0 18.0 15.0 3,300 8,250,000 27 10 97.0 1.85 60 75RI1820(1)30(2) R75RI1820(1)30(2)
1250 600 0.01 5.0 11.0 18.0 15.0 3,300 8,250,000 33 10 79.6 2.04 60 75RI2100(1)30(2) R75RI2100(1)30(2)
1250 600 0.012 6.0 12.0 18.0 15.0 3,300 8,250,000 40 10 66.3 2.32 56 75RI2120(1)30(2) R75RI2120(1)30(2)
VDC VAC Cap
Value
TH L Lead
Spacing
(S)
dV/dt
(V/µs) Max K0
(V2/µs)
Apk
nH mΩ Arms
(°C/W) KEMET Internal
Part Number Customer
Part Number
Lead
Length
2x 4 mm
at
100
kHz
at 100 kHz,
85°C
Dimensions Ipkr ESL ESR Irms max (*) Rth
Table 1 – Ratings & Part Number Reference cont.
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%
(3) K = 10%, M = 20%
(*) Irms value that leads to a ΔT of ≈ 20°C on the box surface > TBOX = TAMB + ΔT = 85°C + 20°C = 105°C
21© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4 mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
1250 600 0.015 6.0 12.0 18.0 15.0 3,300 8,250,000 50 10 53.1 2.60 56 75RI2150(1)30(2) R75RI2150(1)30(2)
1250 600 0.018 7.5 13.5 18.0 15.0 3,300 8,250,000 59 10 44.2 2.99 51 75RI2180(1)30(2) R75RI2180(1)30(2)
1250 600 0.022 7.5 13.5 18.0 15.0 3,300 8,250,000 73 10 36.2 3.30 51 75RI2220(1)30(2) R75RI2220(1)30(2)
1250 600 0.022 9.0 12.5 18.0 15.0 3,300 8,250,000 73 10 36.2 3.34 50 75RI2220(1)70(2) R75RI2220(1)70(2)
1250 600 0.027 8.5 14.5 18.0 15.0 3,300 8,250,000 89 10 29.5 3.77 48 75RI2270(1)30(2) R75RI2270(1)30(2)
1250 600 0.027 13.0 12.0 18.0 15.0 3,300 8,250,000 89 10 29.5 3.89 45 75RI2270(1)70(2) R75RI2270(1)70(2)
1250 600 0.033 10.0 16.0 18.0 15.0 3,300 8,250,000 109 10 24.1 4.34 44 75RI2330(1)30(2) R75RI2330(1)30(2)
1250 600 0.033 13.0 12.0 18.0 15.0 3,300 8,250,000 109 10 24.1 4.30 45 75RI2330(1)70(2) R75RI2330(1)70(2)
1250 600 0.039 10.0 16.0 18.0 15.0 3,300 8,250,000 129 10 20.4 4.72 44 75RI2390(1)30(2) R75RI2390(1)30(2)
1250 600 0.047 11.0 19.0 18.0 15.0 3,300 8,250,000 155 10 16.9 5.42 40 75RI2470(1)30(2) R75RI2470(1)30(2)
1250 600 0.056 11.0 19.0 18.0 15.0 3,300 8,250,000 185 10 19.9 5.00 40 75RI2560(1)30(2) R75RI2560(1)30(2)
1250 600 0.022 6.0 15.0 26.5 22.5 2,100 5,250,000 46 16 36.2 3.57 43 75RN2220(1)30(2) R75RN2220(1)30(2)
1250 600 0.033 6.0 15.0 26.5 22.5 2,100 5,250,000 69 16 24.1 4.37 43 75RN2330(1)30(2) R75RN2330(1)30(2)
1250 600 0.039 6.0 15.0 26.5 22.5 2,100 5,250,000 82 16 20.4 4.75 43 75RN2390(1)30(2) R75RN2390(1)30(2)
1250 600 0.047 7.0 16.0 26.5 22.5 2,100 5,250,000 99 16 16.9 5.37 41 75RN2470(1)30(2) R75RN2470(1)30(2)
1250 600 0.056 7.0 16.0 26.5 22.5 2,100 5,250,000 118 16 19.9 4.95 41 75RN2560(1)30(2) R75RN2560(1)30(2)
1250 600 0.068 8.5 17.0 26.5 22.5 2,100 5,250,000 143 16 16.4 5.64 38 75RN2680(1)30(2) R75RN2680(1)30(2)
1250 600 0.082 10.0 18.5 26.5 22.5 2,100 5,250,000 172 16 13.6 6.41 36 75RN2820(1)30(2) R75RN2820(1)30(2)
1250 600 0.1 10.0 18.5 26.5 22.5 2,100 5,250,000 210 16 11.1 7.08 36 75RN3100(1)30(2) R75RN3100(1)30(2)
1250 600 0.12 11.0 20.0 26.5 22.5 2,100 5,250,000 252 16 9.3 7.97 34 75RN3120(1)30(2) R75RN3120(1)30(2)
1250 600 0.15 13.0 22.0 26.5 22.5 2,100 5,250,000 315 16 7.4 9.26 31 75RN3150(1)30(2) R75RN3150(1)30(2)
1250 600 0.22 14.5 29.5 26.5 22.5 2,100 5,250,000 462 16 5.1 12.04 27 75RN3220(1)30(2) R75RN3220(1)30(2)
1250 600 0.1 9.0 17.0 32.0 27.5 750 1,875,000 75 18 11.1 7.17 35 75RR3100(1)40(2) R75RR3100(1)40(2)
1250 600 0.12 9.0 17.0 32.0 27.5 750 1,875,000 90 18 9.3 7.85 35 75RR3120(1)40(2) R75RR3120(1)40(2)
1250 600 0.15 11.0 20.0 32.0 27.5 750 1,875,000 113 18 7.4 9.26 31 75RR3150(1)40(2) R75RR3150(1)40(2)
1250 600 0.18 11.0 20.0 32.0 27.5 750 1,875,000 135 18 6.2 10.14 31 75RR3180(1)40(2) R75RR3180(1)40(2)
1250 600 0.18 24.0 15.0 32.0 27.5 750 1,875,000 135 18 6.2 10.91 27 75RR3180(1)L4(2) R75RR3180(1)L4(2)
1250 600 0.22 13.0 22.0 32.0 27.5 750 1,875,000 165 18 5.1 11.65 29 75RR3220(1)40(2) R75RR3220(1)40(2)
1250 600 0.22 24.0 15.0 32.0 27.5 750 1,875,000 165 18 5.1 12.06 27 75RR3220(1)L4(2) R75RR3220(1)L4(2)
1250 600 0.27 13.0 25.0 32.0 27.5 750 1,875,000 203 18 10.0 8.48 28 75RR3270(1)40(2) R75RR3270(1)40(2)
1250 600 0.33 14.0 28.0 32.0 27.5 750 1,875,000 248 18 8.2 9.67 26 75RR3330(1)30(2) R75RR3330(1)30(2)
1250 600 0.39 18.0 33.0 32.0 27.5 750 1,875,000 293 18 8.2 10.33 23 75RR3390(1)40(2) R75RR3390(1)40(2)
1250 600 0.47 18.0 33.0 32.0 27.5 750 1,875,000 353 18 6.8 11.35 23 75RR3470(1)40(2) R75RR3470(1)40(2)
1250 600 0.56 18.0 33.0 32.0 27.5 750 1,875,000 420 18 5.7 12.38 23 75RR3560(1)40(2) R75RR3560(1)40(2)
1250 600 0.68 22.0 37.0 32.0 27.5 750 1,875,000 510 18 4.7 14.35 21 75RR3680(1)40(2) R75RR3680(1)40(2)
1250 600 0.82 22.0 37.0 32.0 27.5 750 1,875,000 615 18 3.9 15.75 21 75RR3820(1)40(2) R75RR3820(1)40(2)
1250 600 0.15 11.0 22.0 41.5 37.5 550 1,375,000 83 20 7.4 9.97 27 75RW3150(1)30(2) R75RW3150(1)30(2)
1250 600 0.22 11.0 22.0 41.5 37.5 550 1,375,000 121 20 5.1 12.07 27 75RW3220(1)30(2) R75RW3220(1)30(2)
1250 600 0.27 11.0 22.0 41.5 37.5 550 1,375,000 149 20 10.0 8.58 27 75RW3270(1)30(2) R75RW3270(1)30(2)
1250 600 0.27 24.0 15.0 41.5 37.5 550 1,375,000 149 20 10.0 9.05 24 75RW3270(1)L3(2) R75RW3270(1)L3(2)
1250 600 0.33 13.0 24.0 41.5 37.5 550 1,375,000 182 20 8.2 9.83 25 75RW3330(1)20(2) R75RW3330(1)20(2)
1250 600 0.39 13.0 24.0 41.5 37.5 550 1,375,000 215 20 8.2 9.85 25 75RW3390(1)30(2) R75RW3390(1)30(2)
1250 600 0.39 24.0 15.0 41.5 37.5 550 1,375,000 215 20 8.2 10.02 24 75RW3390(1)L3(2) R75RW3390(1)L3(2)
1250 600 0.47 16.0 28.5 41.5 37.5 550 1,375,000 259 20 6.8 11.44 23 75RW3470(1)40(2) R75RW3470(1)40(2)
1250 600 0.47 24.0 19.0 41.5 37.5 550 1,375,000 259 20 6.8 11.36 23 75RW3470(1)L4(2) R75RW3470(1)L4(2)
1250 600 0.56 16.0 28.5 41.5 37.5 550 1,375,000 308 20 5.7 12.49 23 75RW3560(1)40(2) R75RW3560(1)40(2)
1250 600 0.68 19.0 32.0 41.5 37.5 550 1,375,000 374 20 4.7 14.38 21 75RW3680(1)30(2) R75RW3680(1)30(2)
1250 600 0.82 19.0 32.0 41.5 37.5 550 1,375,000 451 20 3.9 15.79 21 75RW3820(1)40(2) R75RW3820(1)40(2)
1250 600 120.0 40.0 41.5 37.5 550 1,375,000 550 20 3.2 18.30 19 75RW4100(1)30(2) R75RW4100(1)30(2)
1250 600 1.2 20.0 40.0 41.5 37.5 550 1,375,000 660 20 4.0 16.37 19 75RW4120(1)40(2) R75RW4120(1)40(2)
VDC VAC Cap
Value
TH L Lead
Spacing
(S)
dV/dt
(V/µs) Max K0
(V2/µs)
Apk
nH mΩ Arms
(°C/W) KEMET Internal
Part Number Customer
Part Number
Lead
Length
2x 4 mm
at
100
kHz
at 100 kHz,
85°C
Dimensions Ipkr ESL ESR Irms max (*) Rth
Table 1 – Ratings & Part Number Reference cont.
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%
(3) K = 10%, M = 20%
(*) Irms value that leads to a ΔT of ≈ 20°C on the box surface > TBOX = TAMB + ΔT = 85°C + 20°C = 105°C
22© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4 mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
1250 600 1.5 24.0 44.0 41.5 37.5 550 1,375,000 825 20 3.2 19.10 17 75RW4150(1)40(2) R75RW4150(1)40(2)
1250 600 1.8 30.0 45.0 41.5 37.5 550 1,375,000 990 20 2.7 21.69 16 75RW4180(1)20(2) R75RW4180(1)20(2)
1600 650 0.0022 4.0 10.0 18.0 15.0 6,000 19,200,000 13 10 361.7 0.90 65 75TI1220(1)30(2) R75TI1220(1)30(2)
1600 650 0.0033 4.0 10.0 18.0 15.0 6,000 19,200,000 20 10 241.1 1.13 65 75TI1330(1)30(2) R75TI1330(1)30(2)
1600 650 0.0039 4.0 10.0 18.0 15.0 6,000 19,200,000 23 10 204.0 1.22 65 75TI1390(1)30(2) R75TI1390(1)30(2)
1600 650 0.0047 4.0 10.0 18.0 15.0 6,000 19,200,000 28 10 169.3 1.34 65 75TI1470(1)30(2) R75TI1470(1)30(2)
1600 650 0.0056 5.0 11.0 18.0 15.0 6,000 19,200,000 34 10 142.1 1.53 60 75TI1560(1)30(2) R75TI1560(1)30(2)
1600 650 0.0068 5.0 11.0 18.0 15.0 6,000 19,200,000 41 10 117.0 1.68 60 75TI1680(1)30(2) R75TI1680(1)30(2)
1600 650 0.0082 6.0 12.0 18.0 15.0 6,000 19,200,000 49 10 97.0 1.92 56 75TI1820(1)30(2) R75TI1820(1)30(2)
1600 650 0.01 6.0 12.0 18.0 15.0 6,000 19,200,000 60 10 79.6 2.12 56 75TI2100(1)30(2) R75TI2100(1)30(2)
1600 650 0.012 7.5 13.5 18.0 15.0 6,000 19,200,000 72 10 66.3 2.44 51 75TI2120(1)30(2) R75TI2120(1)30(2)
1600 650 0.015 7.5 13.5 18.0 15.0 6,000 19,200,000 90 10 53.1 2.73 51 75TI2150(1)30(2) R75TI2150(1)30(2)
1600 650 0.018 8.5 14.5 18.0 15.0 6,000 19,200,000 108 10 44.2 3.08 48 75TI2180(1)30(2) R75TI2180(1)30(2)
1600 650 0.018 9.0 12.5 18.0 15.0 6,000 19,200,000 108 10 44.2 3.02 50 75TI2180(1)70(2) R75TI2180(1)70(2)
1600 650 0.022 10.0 16.0 18.0 15.0 6,000 19,200,000 132 10 36.2 3.54 44 75TI2220(1)30(2) R75TI2220(1)30(2)
1600 650 0.022 13.0 12.0 18.0 15.0 6,000 19,200,000 132 10 36.2 3.51 45 75TI2220(1)70(2) R75TI2220(1)70(2)
1600 650 0.027 10.0 16.0 18.0 15.0 6,000 19,200,000 162 10 29.5 3.92 44 75TI2270(1)30(2) R75TI2270(1)30(2)
1600 650 0.033 11.0 19.0 18.0 15.0 6,000 19,200,000 198 10 24.1 4.54 40 75TI2330(1)30(2) R75TI2330(1)30(2)
1600 650 0.0068 6.0 15.0 26.5 22.5 3,000 9,600,000 20 16 117.0 1.98 43 75TN1680(1)30(2) R75TN1680(1)30(2)
1600 650 0.01 6.0 15.0 26.5 22.5 3,000 9,600,000 30 16 79.6 2.41 43 75TN2100(1)30(2) R75TN2100(1)30(2)
1600 650 0.015 6.0 15.0 26.5 22.5 3,000 9,600,000 45 16 53.1 2.95 43 75TN2150(1)30(2) R75TN2150(1)30(2)
1600 650 0.022 6.0 15.0 26.5 22.5 3,000 9,600,000 66 16 36.2 3.57 43 75TN2220(1)30(2) R75TN2220(1)30(2)
1600 650 0.027 6.0 15.0 26.5 22.5 3,000 9,600,000 81 16 29.5 3.95 43 75TN2270(1)30(2) R75TN2270(1)30(2)
1600 650 0.033 7.0 16.0 26.5 22.5 3,000 9,600,000 99 16 24.1 4.50 41 75TN2330(1)30(2) R75TN2330(1)30(2)
1600 650 0.039 7.0 16.0 26.5 22.5 3,000 9,600,000 117 16 20.4 4.89 41 75TN2390(1)30(2) R75TN2390(1)30(2)
1600 650 0.047 8.5 17.0 26.5 22.5 3,000 9,600,000 141 16 16.9 5.55 38 75TN2470(1)30(2) R75TN2470(1)30(2)
1600 650 0.056 10.0 18.5 26.5 22.5 3,000 9,600,000 168 16 19.9 5.30 36 75TN2560(1)30(2) R75TN2560(1)30(2)
1600 650 0.068 10.0 18.5 26.5 22.5 3,000 9,600,000 204 16 16.4 5.84 36 75TN2680(1)30(2) R75TN2680(1)30(2)
1600 650 0.082 11.0 20.0 26.5 22.5 3,000 9,600,000 246 16 13.6 6.58 34 75TN2820(1)30(2) R75TN2820(1)30(2)
1600 650 0.1 13.0 22.0 26.5 22.5 3,000 9,600,000 300 16 11.1 7.56 31 75TN3100(1)30(2) R75TN3100(1)30(2)
1600 650 0.12 13.0 22.0 26.5 22.5 3,000 9,600,000 360 16 9.3 8.29 31 75TN3120(1)30(2) R75TN3120(1)30(2)
1600 650 0.047 9.0 17.0 32.0 27.5 1,500 4,800,000 71 18 16.9 5.81 35 75TR2470(1)30(2) R75TR2470(1)30(2)
1600 650 0.068 9.0 17.0 32.0 27.5 1,500 4,800,000 102 18 16.4 5.91 35 75TR2680(1)30(2) R75TR2680(1)30(2)
1600 650 0.082 9.0 17.0 32.0 27.5 1,500 4,800,000 123 18 13.6 6.49 35 75TR2820(1)30(2) R75TR2820(1)30(2)
1600 650 0.1 11.0 20.0 32.0 27.5 1,500 4,800,000 150 18 11.1 7.56 31 75TR3100(1)40(2) R75TR3100(1)40(2)
1600 650 0.12 11.0 20.0 32.0 27.5 1,500 4,800,000 180 18 9.3 8.28 31 75TR3120(1)30(2) R75TR3120(1)30(2)
1600 650 0.12 24.0 15.0 32.0 27.5 1,500 4,800,000 180 18 9.3 8.91 27 75TR3120(1)L3(2) R75TR3120(1)L3(2)
1600 650 0.15 13.0 22.0 32.0 27.5 1,500 4,800,000 225 18 7.4 9.62 29 75TR3150(1)30(2) R75TR3150(1)30(2)
1600 650 0.15 24.0 15.0 32.0 27.5 1,500 4,800,000 225 18 7.4 9.96 27 75TR3150(1)L3(2) R75TR3150(1)L3(2)
1600 650 0.18 13.0 25.0 32.0 27.5 1,500 4,800,000 270 18 6.2 10.79 28 75TR3180(1)20(2) R75TR3180(1)20(2)
1600 650 0.22 13.0 25.0 32.0 27.5 1,500 4,800,000 330 18 5.1 11.93 28 75TR3220(1)40(3) R75TR3220(1)40(3)
1600 650 0.22 14.0 28.0 32.0 27.5 1,500 4,800,000 330 18 5.1 12.30 26 75TR3220(1)30(2) R75TR3220(1)30(2)
1600 650 0.27 18.0 33.0 32.0 27.5 1,500 4,800,000 405 18 10.0 9.33 23 75TR3270(1)30(2) R75TR3270(1)30(2)
1600 650 0.33 18.0 33.0 32.0 27.5 1,500 4,800,000 495 18 8.2 10.31 23 75TR3330(1)30(2) R75TR3330(1)30(2)
1600 650 0.39 18.0 33.0 32.0 27.5 1,500 4,800,000 585 18 8.2 10.33 23 75TR3390(1)30(2) R75TR3390(1)30(2)
1600 650 0.47 22.0 37.0 32.0 27.5 1,500 4,800,000 705 18 6.8 11.93 21 75TR3470(1)30(2) R75TR3470(1)30(2)
1600 650 0.56 22.0 37.0 32.0 27.5 1,500 4,800,000 840 18 5.7 13.02 21 75TR3560(1)30(2) R75TR3560(1)30(2)
1600 650 0.1 11.0 22.0 41.5 37.5 750 2,400,000 75 20 11.1 8.14 27 75TW3100(1)30(2) R75TW3100(1)30(2)
1600 650 0.15 11.0 22.0 41.5 37.5 750 2,400,000 113 20 7.4 9.97 27 75TW3150(1)30(2) R75TW3150(1)30(2)
1600 650 0.15 24.0 15.0 41.5 37.5 750 2,400,000 113 20 7.4 10.51 24 75TW3150(1)L3(2) R75TW3150(1)L3(2)
VDC VAC Cap
Value
TH L Lead
Spacing
(S)
dV/dt
(V/µs) Max K0
(V2/µs)
Apk
nH mΩ Arms
(°C/W) KEMET Internal
Part Number Customer
Part Number
Lead
Length
2x 4 mm
at
100
kHz
at 100 kHz,
85°C
Dimensions Ipkr ESL ESR Irms max (*) Rth
Table 1 – Ratings & Part Number Reference cont.
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%
(3) K = 10%, M = 20%
(*) Irms value that leads to a ΔT of ≈ 20°C on the box surface > TBOX = TAMB + ΔT = 85°C + 20°C = 105°C
23© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4 mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
1600 650 0.18 11.0 22.0 41.5 37.5 750 2,400,000 135 20 6.2 10.92 27 75TW3180(1)30(2) R75TW3180(1)30(2)
1600 650 0.22 13.0 24.0 41.5 37.5 750 2,400,000 165 20 5.1 12.50 25 75TW3220(1)20(2) R75TW3220(1)20(2)
1600 650 0.22 24.0 15.0 41.5 37.5 750 2,400,000 165 20 5.1 12.73 24 75TW3220(1)L2(2) R75TW3220(1)L2(2)
1600 650 0.27 13.0 24.0 41.5 37.5 750 2,400,000 203 20 10.0 8.89 25 75TW3270(1)30(2) R75TW3270(1)30(2)
1600 650 0.27 24.0 15.0 41.5 37.5 750 2,400,000 203 20 10.0 9.05 24 75TW3270(1)L3(2) R75TW3270(1)L3(2)
1600 650 0.33 16.0 28.5 41.5 37.5 750 2,400,000 248 20 8.2 10.40 23 75TW3330(1)30(2) R75TW3330(1)30(2)
1600 650 0.33 24.0 19.0 41.5 37.5 750 2,400,000 248 20 8.2 10.33 23 75TW3330(1)L3(2) R75TW3330(1)L3(2)
1600 650 0.39 16.0 28.5 41.5 37.5 750 2,400,000 293 20 8.2 10.43 23 75TW3390(1)30(2) R75TW3390(1)30(2)
1600 650 0.47 19.0 32.0 41.5 37.5 750 2,400,000 353 20 6.8 11.95 21 75TW3470(1)20(2) R75TW3470(1)20(2)
1600 650 0.56 19.0 32.0 41.5 37.5 750 2,400,000 420 20 5.7 13.05 21 75TW3560(1)30(2) R75TW3560(1)30(2)
1600 650 0.68 20.0 40.0 41.5 37.5 750 2,400,000 510 20 4.7 15.09 19 75TW3680(1)20(2) R75TW3680(1)20(2)
1600 650 0.82 20.0 40.0 41.5 37.5 750 2,400,000 615 20 3.9 16.57 19 75TW3820(1)30(2) R75TW3820(1)30(2)
1600 650 124.0 44.0 41.5 37.5 750 2,400,000 750 20 3.2 19.10 17 75TW4100(1)30(2) R75TW4100(1)30(2)
1600 650 1.2 24.0 44.0 41.5 37.5 750 2,400,000 900 20 4.0 17.08 17 75TW4120(1)30(2) R75TW4120(1)30(2)
1600 650 1.5 30.0 45.0 41.5 37.5 750 2,400,000 1,125 20 3.2 19.80 16 75TW4150(1)30(2) R75TW4150(1)30(2)
2000 700 0.001 4.0 10.0 18.0 15.0 9,500 38,000,000 10 10 795.8 0.44 65 75UI1100(1)40(2) R75UI1100(1)40(2)
2000 700 0.0012 4.0 10.0 18.0 15.0 9,500 38,000,000 11 10 663.1 0.53 65 75UI1120(1)40(2) R75UI1120(1)40(2)
2000 700 0.0015 4.0 10.0 18.0 15.0 9,500 38,000,000 14 10 530.5 0.66 65 75UI1150(1)40(2) R75UI1150(1)40(2)
2000 700 0.0018 4.0 10.0 18.0 15.0 9,500 38,000,000 17 10 442.1 0.79 65 75UI1180(1)40(2) R75UI1180(1)40(2)
2000 700 0.0022 4.0 10.0 18.0 15.0 9,500 38,000,000 21 10 361.7 0.92 65 75UI1220(1)40(2) R75UI1220(1)40(2)
2000 700 0.0027 4.0 10.0 18.0 15.0 9,500 38,000,000 26 10 294.7 1.02 65 75UI1270(1)40(2) R75UI1270(1)40(2)
2000 700 0.0033 4.0 10.0 18.0 15.0 9,500 38,000,000 31 10 241.1 1.13 65 75UI1330(1)40(2) R75UI1330(1)40(2)
2000 700 0.0039 5.0 11.0 18.0 15.0 9,500 38,000,000 37 10 204.0 1.28 60 75UI1390(1)30(2) R75UI1390(1)30(2)
2000 700 0.0047 5.0 11.0 18.0 15.0 9,500 38,000,000 45 10 169.3 1.40 60 75UI1470(1)30(2) R75UI1470(1)30(2)
2000 700 0.0056 6.0 12.0 18.0 15.0 9,500 38,000,000 53 10 142.1 1.59 56 75UI1560(1)30(2) R75UI1560(1)30(2)
2000 700 0.0068 6.0 12.0 18.0 15.0 9,500 38,000,000 65 10 117.0 1.75 56 75UI1680(1)30(2) R75UI1680(1)30(2)
2000 700 0.0082 7.5 13.5 18.0 15.0 9,500 38,000,000 78 10 97.0 2.02 51 75UI1820(1)30(2) R75UI1820(1)30(2)
2000 700 0.01 7.5 13.5 18.0 15.0 9,500 38,000,000 95 10 79.6 2.23 51 75UI2100(1)30(2) R75UI2100(1)30(2)
2000 700 0.012 8.5 14.5 18.0 15.0 9,500 38,000,000 114 10 66.3 2.51 48 75UI2120(1)30(2) R75UI2120(1)30(2)
2000 700 0.012 9.0 12.5 18.0 15.0 9,500 38,000,000 114 10 66.3 2.47 50 75UI2120(1)70(2) R75UI2120(1)70(2)
2000 700 0.015 8.5 14.5 18.0 15.0 9,500 38,000,000 143 10 53.1 2.81 48 75UI2150(1)30(2) R75UI2150(1)30(2)
2000 700 0.015 13.0 12.0 18.0 15.0 9,500 38,000,000 143 10 53.1 2.90 45 75UI2150(1)70(2) R75UI2150(1)70(2)
2000 700 0.018 10.0 16.0 18.0 15.0 9,500 38,000,000 171 10 44.2 3.20 44 75UI2180(1)30(2) R75UI2180(1)30(2)
2000 700 0.018 13.0 12.0 18.0 15.0 9,500 38,000,000 171 10 44.2 3.17 45 75UI2180(1)70(2) R75UI2180(1)70(2)
2000 700 0.022 11.0 19.0 18.0 15.0 9,500 38,000,000 209 10 36.2 3.71 40 75UI2220(1)30(2) R75UI2220(1)30(2)
2000 700 0.027 11.0 19.0 18.0 15.0 9,500 38,000,000 257 10 29.5 4.11 40 75UI2270(1)30(2) R75UI2270(1)30(2)
2000 700 0.0033 6.0 15.0 26.5 22.5 4,000 16,000,000 13 16 241.1 1.38 43 75UN1330(1)30(2) R75UN1330(1)30(2)
2000 700 0.0047 6.0 15.0 26.5 22.5 4,000 16,000,000 19 16 169.3 1.65 43 75UN1470(1)30(2) R75UN1470(1)30(2)
2000 700 0.0056 6.0 15.0 26.5 22.5 4,000 16,000,000 22 16 142.1 1.80 43 75UN1560(1)30(2) R75UN1560(1)30(2)
2000 700 0.0068 6.0 15.0 26.5 22.5 4,000 16,000,000 27 16 117.0 1.98 43 75UN1680(1)30(2) R75UN1680(1)30(2)
2000 700 0.0082 6.0 15.0 26.5 22.5 4,000 16,000,000 33 16 97.0 2.18 43 75UN1820(1)30(2) R75UN1820(1)30(2)
2000 700 0.01 6.0 15.0 26.5 22.5 4,000 16,000,000 40 16 79.6 2.41 43 75UN2100(1)30(2) R75UN2100(1)30(2)
2000 700 0.012 6.0 15.0 26.5 22.5 4,000 16,000,000 48 16 66.3 2.64 43 75UN2120(1)30(2) R75UN2120(1)30(2)
2000 700 0.015 6.0 15.0 26.5 22.5 4,000 16,000,000 60 16 53.1 2.95 43 75UN2150(1)30(2) R75UN2150(1)30(2)
2000 700 0.018 6.0 15.0 26.5 22.5 4,000 16,000,000 72 16 44.2 3.23 43 75UN2180(1)30(2) R75UN2180(1)30(2)
2000 700 0.022 6.0 15.0 26.5 22.5 4,000 16,000,000 88 16 36.2 3.57 43 75UN2220(1)30(2) R75UN2220(1)30(2)
2000 700 0.027 7.0 16.0 26.5 22.5 4,000 16,000,000 108 16 29.5 4.07 41 75UN2270(1)30(2) R75UN2270(1)30(2)
2000 700 0.033 8.5 17.0 26.5 22.5 4,000 16,000,000 132 16 24.1 4.65 38 75UN2330(1)30(2) R75UN2330(1)30(2)
2000 700 0.039 10.0 18.5 26.5 22.5 4,000 16,000,000 156 16 20.4 5.23 36 75UN2390(1)30(2) R75UN2390(1)30(2)
2000 700 0.047 10.0 18.5 26.5 22.5 4,000 16,000,000 188 16 16.9 5.74 36 75UN2470(1)30(2) R75UN2470(1)30(2)
VDC VAC Cap
Value
TH L Lead
Spacing
(S)
dV/dt
(V/µs) Max K0
(V2/µs)
Apk
nH mΩ Arms
(°C/W) KEMET Internal
Part Number Customer
Part Number
Lead
Length
2x 4 mm
at
100
kHz
at 100 kHz,
85°C
Dimensions Ipkr ESL ESR Irms max (*) Rth
Table 1 – Ratings & Part Number Reference cont.
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%
(3) K = 10%, M = 20%
(*) Irms value that leads to a ΔT of ≈ 20°C on the box surface > TBOX = TAMB + ΔT = 85°C + 20°C = 105°C
24© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Table 1 – Ratings & Part Number Reference cont.
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) J = 5%, K = 10%, M = 20%
(3) K = 10%, M = 20%
(*) Irms value that leads to a ΔT of ≈ 20°C on the box surface > TBOX = TAMB + ΔT = 85°C + 20°C = 105°C
VDC VAC
Cap
Value
(µF)
Dimensions
in mm Lead
Spacing
(S)
dV/dt
(V/µs)
Max K0
(V2/µs)
Ipkr
ESL ESR Irms max (*)
Rth KEMET
Internal
Part Number
Customer
Part
Number
Lead
Length
2x 4 mm
at
100
kHz
at
100 kHz,
85°C
TH L Apk nH mΩ Arms (°C/W)
2000 700 0.056 11.0 20.0 26.5 22.5 4,000 16,000,000 224 16 19.9 5.44 34 75UN2560(1)30(2) R75UN2560(1)30(2)
2000 700 0.068 13.0 22.0 26.5 22.5 4,000 16,000,000 272 16 16.4 6.24 31 75UN2680(1)30(2) R75UN2680(1)30(2)
2000 700 0.022 9.0 17.0 32.0 27.5 2,000 8,000,000 44 18 36.2 3.98 35 75UR2220(1)30(2) R75UR2220(1)30(2)
2000 700 0.033 9.0 17.0 32.0 27.5 2,000 8,000,000 66 18 24.1 4.87 35 75UR2330(1)30(2) R75UR2330(1)30(2)
2000 700 0.047 9.0 17.0 32.0 27.5 2,000 8,000,000 94 18 16.9 5.81 35 75UR2470(1)30(2) R75UR2470(1)30(2)
2000 700 0.056 9.0 17.0 32.0 27.5 2,000 8,000,000 112 18 19.9 5.36 35 75UR2560(1)30(2) R75UR2560(1)30(2)
2000 700 0.068 9.0 17.0 32.0 27.5 2,000 8,000,000 136 18 16.4 5.91 35 75UR2680(1)40(2) R75UR2680(1)40(2)
2000 700 0.082 11.0 20.0 32.0 27.5 2,000 8,000,000 164 18 13.6 6.85 31 75UR2820(1)40(2) R75UR2820(1)40(2)
2000 700 0.1 11.0 20.0 32.0 27.5 2,000 8,000,000 200 18 11.1 7.56 31 75UR3100(1)30(2) R75UR3100(1)30(2)
2000 700 0.1 24.0 15.0 32.0 27.5 2,000 8,000,000 200 18 11.1 8.13 27 75UR3100(1)L3(2) R75UR3100(1)L3(2)
2000 700 0.12 13.0 22.0 32.0 27.5 2,000 8,000,000 240 18 9.3 8.61 29 75UR3120(1)30(2) R75UR3120(1)30(2)
2000 700 0.15 13.0 25.0 32.0 27.5 2,000 8,000,000 300 18 7.4 9.85 28 75UR3150(1)40(2) R75UR3150(1)40(2)
2000 700 0.15 24.0 15.0 32.0 27.5 2,000 8,000,000 300 18 7.4 9.96 27 75UR3150(1)L4(2) R75UR3150(1)L4(2)
2000 700 0.18 13.0 25.0 32.0 27.5 2,000 8,000,000 360 18 6.2 10.79 28 75UR3180(1)40(2) R75UR3180(1)40(2)
2000 700 0.22 14.0 28.0 32.0 27.5 2,000 8,000,000 440 18 5.1 12.30 26 75UR3220(1)40(2) R75UR3220(1)40(2)
2000 700 0.27 18.0 33.0 32.0 27.5 2,000 8,000,000 540 18 10.0 9.33 23 75UR3270(1)30(2) R75UR3270(1)30(2)
2000 700 0.33 18.0 33.0 32.0 27.5 2,000 8,000,000 660 18 8.2 10.31 23 75UR3330(1)40(2) R75UR3330(1)40(2)
2000 700 0.39 22.0 37.0 32.0 27.5 2,000 8,000,000 780 18 8.2 10.86 21 75UR3390(1)30(2) R75UR3390(1)30(2)
2000 700 0.47 22.0 37.0 32.0 27.5 2,000 8,000,000 940 18 6.8 11.93 21 75UR3470(1)40(2) R75UR3470(1)40(2)
2000 700 0.068 11.0 22.0 41.5 37.5 700 2,800,000 48 20 16.4 6.71 27 75UW2680(1)30(2) R75UW2680(1)30(2)
2000 700 0.1 11.0 22.0 41.5 37.5 700 2,800,000 70 20 11.1 8.14 27 75UW3100(1)30(2) R75UW3100(1)30(2)
2000 700 0.1 24.0 15.0 41.5 37.5 700 2,800,000 70 20 11.1 8.58 24 75UW3100(1)L3(2) R75UW3100(1)L3(2)
2000 700 0.12 11.0 22.0 41.5 37.5 700 2,800,000 84 20 9.3 8.91 27 75UW3120(1)30(2) R75UW3120(1)30(2)
2000 700 0.12 24.0 15.0 41.5 37.5 700 2,800,000 84 20 9.3 9.40 24 75UW3120(1)L3(2) R75UW3120(1)L3(2)
2000 700 0.15 11.0 22.0 41.5 37.5 700 2,800,000 105 20 7.4 9.97 27 75UW3150(1)30(2) R75UW3150(1)30(2)
2000 700 0.15 24.0 15.0 41.5 37.5 700 2,800,000 105 20 7.4 10.51 24 75UW3150(1)L3(2) R75UW3150(1)L3(2)
2000 700 0.18 13.0 24.0 41.5 37.5 700 2,800,000 126 20 6.2 11.31 25 75UW3180(1)30(2) R75UW3180(1)30(2)
2000 700 0.18 24.0 15.0 41.5 37.5 700 2,800,000 126 20 6.2 11.51 24 75UW3180(1)L3(2) R75UW3180(1)L3(2)
2000 700 0.22 13.0 24.0 41.5 37.5 700 2,800,000 154 20 5.1 12.50 25 75UW3220(1)30(2) R75UW3220(1)30(2)
2000 700 0.22 24.0 15.0 41.5 37.5 700 2,800,000 154 20 5.1 12.73 24 75UW3220(1)L3(2) R75UW3220(1)L3(2)
2000 700 0.27 16.0 28.5 41.5 37.5 700 2,800,000 189 20 10.0 9.41 23 75UW3270(1)30(2) R75UW3270(1)30(2)
2000 700 0.27 24.0 19.0 41.5 37.5 700 2,800,000 189 20 10.0 9.34 23 75UW3270(1)L3(2) R75UW3270(1)L3(2)
2000 700 0.33 16.0 28.5 41.5 37.5 700 2,800,000 231 20 8.2 10.40 23 75UW3330(1)30(2) R75UW3330(1)30(2)
2000 700 0.33 24.0 19.0 41.5 37.5 700 2,800,000 231 20 8.2 10.33 23 75UW3330(1)L3(2) R75UW3330(1)L3(2)
2000 700 0.39 19.0 32.0 41.5 37.5 700 2,800,000 273 20 8.2 10.89 21 75UW3390(1)30(2) R75UW3390(1)30(2)
2000 700 0.47 19.0 32.0 41.5 37.5 700 2,800,000 329 20 6.8 11.95 21 75UW3470(1)30(2) R75UW3470(1)30(2)
2000 700 0.56 20.0 40.0 41.5 37.5 700 2,800,000 392 20 5.7 13.70 19 75UW3560(1)40(2) R75UW3560(1)40(2)
2000 700 0.68 20.0 40.0 41.5 37.5 700 2,800,000 476 20 4.7 15.09 19 75UW3680(1)30(2) R75UW3680(1)30(2)
2000 700 0.82 24.0 44.0 41.5 37.5 700 2,800,000 574 20 3.9 17.29 17 75UW3820(1)40(2) R75UW3820(1)40(2)
2000 700 124.0 44.0 41.5 37.5 700 2,800,000 700 20 3.2 19.10 17 75UW4100(1)30(2) R75UW4100(1)30(2)
VDC VAC Cap
Value
TH L Lead
Spacing
(S)
dV/dt
(V/µs) Max K0
(V2/µs)
Apk
nH mΩ Arms
(°C/W) KEMET Internal
Part Number Customer
Part Number
Lead
Length
2x 4 mm
at
100
kHz
at 100 kHz,
85°C
Dimensions Ipkr ESL ESR Irms max (*) Rth
25© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as a primary solder.
Thishasincreasedtheliquidustemperaturefromthatof183°CforSnPbeutecticalloyto217–221°Cforthenewalloys.Asa
result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave
temperatures.Polypropylenecapacitorsareespeciallysensitivetoheat(themeltingpointofpolypropyleneis160–170°C).
Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to
15mm),andgreatcarehastobetakenduringsoldering.TherecommendedsolderprolesfromKEMETshouldbeused.Please
consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760–1 Edition 2 serves as a solid
guideline for successful soldering. Please see Figure 1.
Reowsolderingisnotrecommendedforthrough-holelmcapacitors.Exposingcapacitorstoasolderingproleinexcessofthe
above recommended limits may result in degradation or permanent damage to the capacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert
through-holepartsafterthecuringofsurfacemountparts.ConsultKEMETtodiscusstheactualtemperatureproleintheoven,
if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended.
Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle.
Manual Soldering Recommendations
The following is recommended for manual
soldering with a soldering iron.
The soldering iron tip temperature should
besetat350°C(+10°Cmaximum)withthe
soldering duration not to exceed more than 3
seconds.
Recommended Soldering Temperature
0
50
100
150
200
250
300
350
400
012345678
Soldering Time (seconds)
Soldering Iron Bit Temperature (°C)
Wave Soldering Recommendations
0
50
100
150
200
250
300
0 40 80 120 160 200 240
Temperature (°C)
Time (seconds)
Cooling
2+3 seconds max
260°C
First Wave Second Wave
∆ T < 150°C
ca. 2°C/second
ca. 3.5°C/second typical
ca. 5°C/second
Preheating
T
preheat
Typical
26© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Soldering Process cont.
Wave Soldering Recommendations cont.
1. The table indicates the maximum set-up temperature of the soldering process
Figure 1.
Dielectric Film
Material
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor
Pitch
≤15mm
Capacitor
Pitch
> 15 mm
Capacitor
Pitch
≤15mm
Capacitor
Pitch
> 15 mm
Polyester 130°C 130°C 270°C 270°C
Polypropylene 110°C 130°C 260°C 270°C
Paper 130°C 140°C 270°C 270°C
Polyphenylene
Sulphide 150°C 160°C 270°C 270°C
2. The maximum temperature measured inside the capacitor:
Set the temperature so that inside the element the maximum temperature is below the limit:
Dielectric Film Material Maximum temperature
measured inside the element
Polyester 160°C
Polypropylene 110°C
Paper 160°C
Polyphenylene Sulphide 160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectivedipsolderingisavariationofreowsoldering.Inthismethod,theprintedcircuitboardwiththrough-hole
componentstobesolderedispreheatedandtransportedoverthesolderbathasinnormalowsolderingwithouttouching
the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten
solder only at the places of the selected components, and pressed against the lower surface of the board to solder the
components.
Thetemperatureproleforselectivesolderingissimilartothedoublewaveowsolderingoutlinedinthisdocument,
however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of
overheatingisgreaterthanindoublewaveowsoldering.Greatcaremustbetakensothatthepartsarenotoverheated.
27© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Construction
1 Section Detailed Cross Section
Self-Extinguishing
Resin
Molded Plastic
Case
Molded Plastic
Case
Leads
Metal Contact
Layer
Metal Contact
Layer
Margin
Single-sided Metallized
Polypropylene Film
(Second Layer)
Single-sided Metallized
Polypropylene Film
(First Layer)
Margin
Margin
Single-sided
Metallized
Polypropylene
Film
FILM WINDING SCHEME OPTIONS
1 Section
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided Metallized Polypropylene Film
2 Sections
3 Sections 4 Sections
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
1 Section
Double-sided Metallized Polyester Film
3 Sections
Double-sided
Metallized
Polyester
Carrier
Film
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester
Carrier
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
4 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
1 Section
Polypropylene Film/Foil
2 Sections
Metal Foil Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metallized Polyphenyl-
ene Sulfide Film with
Vacuum-Evaporated
Aluminum Electrodes
1 Section
Metallized Polyphenylene
Sulfide Film (SMR)
Metallized
Impregnated
Paper
1 Section
Metallized Impregnated Paper
Single-sided
Metallized
Polyester
Film
1 Section
Single-sided Metallized Polyester Film
Polypropylene
Film Dielec-
tric
1 Section
AXIAL - Polypropylene Film/Foil
2 Sections
Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metal Foil
Single-sided
Metallized
Polypropylene
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
1 Section
AXIAL - Single-sided Metallized
Polypropylene Film
Single-sided
Metallized
Polyester
Film
1 Section
AXIAL - Single-sided Metallized
Polyester Film
AXIAL - Double-sided
Metallized Polyester Film
Winding Scheme
Single-sided
Metallized
Polypropylene
Film
FILM WINDING SCHEME OPTIONS
1 Section
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided Metallized Polypropylene Film
2 Sections
3 Sections 4 Sections
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
1 Section
Double-sided Metallized Polyester Film
3 Sections
Double-sided
Metallized
Polyester
Carrier
Film
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester
Carrier
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
4 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
1 Section
Polypropylene Film/Foil
2 Sections
Metal Foil Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metallized Polyphenyl-
ene Sulfide Film with
Vacuum-Evaporated
Aluminum Electrodes
1 Section
Metallized Polyphenylene
Sulfide Film (SMR)
Metallized
Impregnated
Paper
1 Section
Metallized Impregnated Paper
Single-sided
Metallized
Polyester
Film
1 Section
Single-sided Metallized Polyester Film
Polypropylene
Film Dielec-
tric
1 Section
AXIAL - Polypropylene Film/Foil
2 Sections
Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metal Foil
Single-sided
Metallized
Polypropylene
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
1 Section
AXIAL - Single-sided Metallized
Polypropylene Film
Single-sided
Metallized
Polyester
Film
1 Section
AXIAL - Single-sided Metallized
Polyester Film
AXIAL - Double-sided
Metallized Polyester Film
Single-sided
Metallized
Polypropylene
Film
FILM WINDING SCHEME OPTIONS
1 Section
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided Metallized Polypropylene Film
2 Sections
3 Sections
4 Sections
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
1 Section
Double-sided Metallized Polyester Film
3 Sections
Double-sided
Metallized
Polyester
Carrier
Film
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester
Carrier
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
4 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
1 Section
Polypropylene Film/Foil
2 Sections
Metal Foil Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metallized Polyphenyl-
ene Sulfide Film with
Vacuum-Evaporated
Aluminum Electrodes
1 Section
Metallized Polyphenylene
Sulfide Film (SMR)
Metallized
Impregnated
Paper
1 Section
Metallized Impregnated Paper
Single-sided
Metallized
Polyester
Film
1 Section
Single-sided Metallized Polyester Film
Polypropylene
Film Dielec-
tric
1 Section
AXIAL - Polypropylene Film/Foil
2 Sections
Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metal Foil
Single-sided
Metallized
Polypropylene
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
1 Section
AXIAL - Single-sided Metallized
Polypropylene Film
Single-sided
Metallized
Polyester
Film
1 Section
AXIAL - Single-sided Metallized
Polyester Film
AXIAL - Double-sided
Metallized Polyester Film
28© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Marking
Pitch – 7.5, 10, 15 & 22.5
Optional Pitch 7.5
Series
Series
Dielectric
Capacitance Capacitance
Tolerance Voltage
Code
Capacitance Capacitance
Tolerance Voltage
Code
Date Code
Can also be style “19-26”
(Year, Calendar Week)
Manufacturer’s
Logo
Manufacturer’s
Logo
Series
Manufacturer’s
Logo
Dielectric
Dielectric
Date Code
Date Code
Can also be style “19-26”
(Year, Calendar Week)
TOPFRONT
Capacitance Capacitance
Tolerance
Series
Dielectric Voltage
Code
Date Code
Can also be style “19-26”
(Year, Calendar Week)
Manufacturer’s
Logo
Marking Variants*
* Differences are caused by technology (clichee, laser or ink jet) and technic (production line)
29© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Marking cont.
Pitch – 7.5, 10, 15, 22.5, 27.5 & 37.5
TOPFRONT
Capacitance
Tolerance
Series
Dielectric
Manufacturer’s
Logo
Rated VoltageCapacitance
Date Code QA-Number
Series
Dielectric
Manufacturer’s
Logo
Rated VoltageCapacitance
Date Code
Hot marking imprinting
with or without color
Marking Variants*
Pitch – 22.5, 27.5 & 37.5
TOPFRONT
Series Dielectric
Manufacturer’s
Logo
Rated
Voltage
Capacitance
Capacitance
Tolerance
QA-Number
Date Code
Marking Variants*
* Differences are caused by technology (clichee, laser or ink jet) and technic (production line)
30© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Marking cont.
Manufacturing Date Code (IEC–60062)
Year Code Month Code
2010
A
January
1
2011
B
February
2
2012
C
March
3
2013
D
April
4
2014
E
May
5
2015
F
June
6
2016
H
July
7
2017
J
August
8
2018
K
September
9
2019
L
October
O
2020
M
November
N
2021
N
December
D
2022
P
2023
R
2024
S
2025
T
2026
U
2027
V
2028
W
2029
X
2030
A
31© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Packaging Quantities
Lead
Spacing
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short Leads
Bulk
Long Leads
Standard
Reel
ø 355 mm
Large Reel
ø 500 mm
Ammo
Taped
Lead and Packaging Code AA - JA - JB
JE - JH Z31 - JM240 - 50 GY - CK1CK DQ
7.5
3.0
8.0
10.0
1,500
1,750
-
2,100
-
2,800
4.0
9.0
10.0
2,000
1,500
-
1,500
-
2,100
5.0
10.5
10.0
1,500
1,000
-
1,200
-
1,600
6.0
12.0
10.5
1,000
800
-
1,000
-
1,350
10
4.0
9.0
13.0
2,000
2,200
1,800
750
1,500
1,000
5.0
11.0
13.0
1,300
2,000
1,500
600
1,250
800
6.0
12.0
13.0
1,000
1,800
1,200
500
1,000
680
15
4.0
10.0
18.0
2,500
1,500
1,500
750
1,500
1,000
5.0
11.0
18.0
2,000
1,250
1,000
600
1,250
800
6.0
12.0
18.0
1,750
1,000
900
500
1,000
680
7.5
13.5
18.0
1,000
800
700
350
800
500
8.5
14.5
18.0
1,000
650
500
300
700
440
9.0
12.5
18.0
1,000
700
520
270
650
410
10.0
16.0
18.0
750
550
500
270
600
380
11.0
19.0
18.0
450
400
350
270
500
340
13.0
12.0
18.0
750
520
490
200
480
280
22.5
6.0
15.0
26.5
805
450
500
300
700
464
7.0
16.0
26.5
700
450
500
250
550
380
8.5
17.0
26.5
468
350
300
250
450
280
10.0
18.5
26.5
396
350
300
160
350
235
11.0
20.0
26.5
360
200
250
190
350
217
13.0
22.0
26.5
300
150
200
130
300
-
14.5
29.5
26.5
264
120
-
-
-
-
27.5
9.0
17.0
32.0
816
-
408
230
450
-
11.0
20.0
32.0
560
-
336
190
350
-
13.0
12.0
32.0
672
-
288
-
-
-
13.0
22.0
32.0
480
-
288
150
300
-
13.0
25.0
32.0
480
-
288
-
300
-
14.0
28.0
32.0
352
-
176
-
-
-
18.0
33.0
32.0
256
-
128
-
-
-
22.0
37.0
32.0
168
-
112
-
-
-
24.0
15.0
32.0
336
-
144
-
-
-
37.5
11.0
22.0
41.5
420
-
252
-
-
-
13.0
24.0
41.5
360
-
216
-
-
-
16.0
28.5
41.5
216
-
108
-
-
-
19.0
32.0
41.5
192
-
96
-
-
-
20.0
40.0
41.5
126
-
84
-
-
-
24.0
15.0
41.5
252
-
108
-
-
-
24.0
19.0
41.5
216
-
108
-
-
-
24.0
44.0
41.5
108
-
72
-
-
-
30.0
45.0
41.5
90
-
60
-
-
-
1 Only for 7.5 mm lead spacing.
2 Only for > 7.5 mm lead spacing.
32© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2)
Lead Spacing 10 & 15 mm Lead Spacing 22.5 & 27.5 mm
P1
P2
P0D0
H0
t
∆h∆h
Ød
W
W1
W0
W2
F
P
P1P2
P
Figure 1 — Lead Spacing 7.5 mm
PP
H0
F
P2
P1
P0D0
W0
W1W
BA
t
t
W2
Ød
∆h∆h
A−B
BA
t
A−B
Taping Specication
Description Symbol
Dimensions (mm)
Lead Spacing
Tolerance
7.5
10.0
15.0
22.5
27.5
Figure 1
Figure 2
Figure 2
Figure 3
Figure 3
Lead wire diameter d 0.5 – 0.6 0.6 0.6 – 0.8 0.8 0.8 ±0.05
Taping lead space P12.7 25.4 25.4 38.1 38.1 ±1
Feedholeleadspace* P
0
12.7 12.7 12.7 12.7 12.7 ±0.2**
Centering of the lead wire P
1
2.6 7.7 5.2 7.8 5.3 ±0.7
Centering of the body P
2
6.35 12.7 12.7 19.05 19.05 ±1.3
Leadspacing*** F7.5 10.0 15.0 22.5 27.5 +0.6/−0.1
Component alignment Δh 00000±2
Component deviation Δp 00000±1
Height of component
from tape center H0**** 18.5 18.5 18.5 18.5 18.5 ±0.5
Carrier tape width W18 18 18 18 18 +1/−0.5
Hold down tape width W
0
6 9 10 10 10 Minimum
Hole position W
1
99999±0.5
Hold down tape position W
2
33333Maximum
Feed hole diameter D
0
44444±0.2
Total tape thickness t0.7 0.7 0.7 0.7 0.7 ±0.2
* Available also 15 mm.
** Maximum 1 mm on 20 lead spacing.
*** 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request.
**** H0 = 16.5 mm is available upon request.
33© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
Lead Taping & Packaging (IEC 60286–2) cont.
Ammo Specications
Dimensions (mm)
HW T
360 340 59
Reel Specications
Dimensions (mm)
D H W
355
500
30
25
55 Maximum
H
T
W
D
W
H
34© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3106_R75 • 11/19/2020
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Film Capacitors – Polypropylene Pulse/High Frequency Capacitors
R75, Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)
KEMET Electronics Corporation Sales Offi ces
Foracompletelistofourglobalsalesoces,pleasevisitwww.kemet.com/sales.
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuch
applications,butarenotintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(suchasinstallationofprotectivecircuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.