MCH03
Ceramic capacitors
Rev.A 1/12
Multi-layer ceramic chip cap acitors
MCH03 (0603 (0201) size, chip cap acitor)
zFeatures
1) Ultra miniature (0.6mm×0.3mm×0.3mm), Ultra light weight (0.3mg)
2) Suitable for mobile devices
3) Lead-free plating terminal
4) No polarity
zQuick Reference
The design and specifications are subject to change without prior notice. Please check the most recent technical
specifications prior to placing orders or using t he product. For more detail information regarding packaging style code,
please check product designation.
Thermal compensation
Part No. Size code Temperature characteristics
(ppm/°C)
Operating temp. range
(
°C
)
Rated voltage
(V)
Capacitance (pF) Capacitance
tolerance Thickness
(mm)
code
0±250(CK)
0±120(CJ)
0±60(CH)
−55 to +125 25
0.5 to 2.7 (E12 Series)
∗
3.0 to 3.9 (E12 Series)
∗
4 to 5 (E12 Series)
∗
5.1 to 10 (E12 Series)
∗
11 to 100 (E12 Series)
C(±0.25pF
)
D(±0.5pF
)
J(
±5%
)
0.3 ± 0.03
A (AN)0603MCH03
∗ : 0.5pF/0.75pF/2pF/3pF/4pF/5pF/6pF/7pF/8pF/9pF available
zHigh dielectric const ant
Part No. Size code Temperature characteristics Operating temp. range
(°C)Rated voltage
(V) Capacitance (pF) Capacitance
tolerance Thickness
(mm)
code
FN
CN
±10%(B)
±15%(X5R)
±15%
(R) (X7R)
+30%, −80%
(F)
+22%, −82%
(Y5V)
−25 to +85
−55 to +125
−55 to +85
−25 to +85
−30 to +85
25
16
25
16
6.3
16
16
100 to 2,200 (E6 Series)
4,700 (E3 Series)
100 to 2,200 (E6 Series)
4,700 (E3 Series)
10,000 (E6 Series)
10,000 (E1 Series)
10,000 (E1 Series)
K (±10%)
Z (+80%, −20%)
MCH03 0603 0.3 ± 0.03
zExternal dimensions (Unit : mm)
0.6±0.03
0.17Min.0.1Min.
0.3±0.030.3±0.03
0.3±0.03
0.3±0.03
MCH03
Ceramic capacitors
Rev.A 2/12
zProduct designation
Rated voltage Temperature characteristic code
:Refer to quick reference table.
Part No.
MCH 0
8
3
2
Code
Packaging Style
133F 03
Code
K
Prduct thickness
0.3mm Reel
φ180mm (7in.)
Basic ordering unit(pcs.)
15,000
ZK
6.3V
16V
25V
Voltage Capacitance tolerance
Code
±
0.25pF(0.5 to 5pF)
±
0.5pF(5.1 to 10pF)
±
5%(11pF or more)
±10%
+80%, −20%
Tolerance
C
D
J
K
Z
N
Packing specification
Paper tape(width 8mm, pitch 2mm)
3-digit
designation
accordijg
to IEC
Nominal
capacitance
zProduct No.list
•Thermal compensation cap acitors
Capacitance
(pF)
Temperature
Rated voltage (V)
A AN(CG) (COG) (CH) Characteristic
25V
Product No.
0.5
0.75
1.0
1.2
1.5
1.8
2.0
2.2
2.7
3.0
3.3
3.9
4.0
4.7
5.0
5.6
6
6.8
7
8
8.2
9
10
0.6 ± 0.03
C (
±
0.25pF)
D (
±
0.5pF)
Tolerance
Product thickness(mm)
MCH032A (AN) 0R5CK
MCH032A (AN) R75CK
MCH032A (AN) 010CK
MCH032A (AN) 1R2CK
MCH032A (AN) 1R5CK
MCH032A (AN) 1R8CK
MCH032A (AN) 020CK
MCH032A (AN) 2R2CK
MCH032A (AN) 2R7CK
MCH032A (AN) 030CK
MCH032A (AN) 3R3CK
MCH032A (AN) 3R9CK
MCH032A (AN) 040CK
MCH032A (AN) 4R7CK
MCH032A (AN) 050CK
MCH032A (AN) 5R6DK
MCH032A (AN) 060DK
MCH032A (AN) 6R8DK
MCH032A (AN) 070DK
MCH032A (AN) 080DK
MCH032A (AN) 8R2DK
MCH032A (AN) 090DK
MCH032A (AN) 100DK
Capacitance
(pF)
Temperature
Rated voltage (V)
A AN(CG) (COG) (CH) Characteristic
25V
Product No.
12
15
18
22
27
33
39
47
56
68
82
100
0.6 ± 0.03
J (
±
5%)
Tolerance
Product thickness(mm)
MCH032A (AN) 120JK
MCH032A (AN) 150JK
MCH032A (AN) 180JK
MCH032A (AN) 220JK
MCH032A (AN) 270JK
MCH032A (AN) 330JK
MCH032A (AN) 390JK
MCH032A (AN) 470JK
MCH032A (AN) 560JK
MCH032A (AN) 680JK
MCH032A (AN) 820JK
MCH032A (AN) 101JK
MCH03
Ceramic capacitors
Rev.A 3/12
•High dielectric const ant capacitors
Capacitance
(pF)
Temperature
Rated voltage (V)
CN (R) (B) (X7R) Characteristic CN (X5R) Characteristic
25V
Product No.
100
150
220
330
470
680
1,000
1,500
2,200
4,700
10,000
0.6 ± 0.03
K (
±
10%)
Tolerance
Product thickness(mm)
MCH032CN101KK
MCH032CN151KK
MCH032CN221KK
MCH032CN331KK
MCH032CN471KK
MCH032CN681KK
MCH032CN102KK
MCH032CN152KK
MCH032CN222KK
16V
Product No.
MCH033CN472KK
6.3V
Product No.
MCH038CN103KK
Capacitance
(pF)
Temperature
Rated voltage (V) FN(F) (Y5V) Characteristic
16V
Product No.
10,000 0.6 ± 0.03
Z (
+
80%,
−
20%)
Tolerance
Product thickness(mm)
MCH033FN103ZK
MCH03
Ceramic capacitors
Rev.A 4/12
•Performance and test method
Items Performance
Appearance and
dimensions No marked defects shall be allowed
for appearance.
Dimensions shall be as specified the
clause 4.
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
As per 4.4 of JIS C 5101-1.
As per 4.5 of JIS C 5101-10
Using a Magnifier.
As per 4.5 of JIS C 5101-1.
As per 4.6.3 of JIS C 5101-10
Measurements shall be made after
60+/−5s period of the rated voltage
applied.
As per 4.6 of JIS C 5101-1.
As per 4.6.4 of JIS C 5101-10
Voltage shall be applied as per Table1.
As per 4.7 of JIS C 5101-1.
As per 4.6.1 of JIS C 5101-10
Measurements shall be made under the
conditions specified in Table 2.
No.
1
Withstanding voltage No dielectrical breakdown or other
damage shall be allowed.
Capacitance shall be
within specified tolerance range.
2
Insulation resistance3
Capacitance
4
Table 1
Charac-
teristic Voltage
300% Rated voltage
250% Rated voltage
A, AN
CN
FN
Table 2
Voltage shall be applied for 1 to 5s with
50mA charging and discharging curent.
Not less than 10000MΩ or
500MΩ µF, whichever is less.
(For products with rated voltage less
than 16V, it is not less than 10000MΩ
or 100MΩ µF, whichever is less.)
Charac-
teristic
A, AN
CN
FN
<
−1000 pF > 1000 pF
1+/−0.1MHz
1+/−0.1Vrms. 1+/−0.1kHz
1+/−0.1Vrms.
1+/−0.1kHz
1+/−0.1Vrms.
Frequency Voltage
Dielectric loss tangent
As per 4.8 of
JIS C 5101-1.
As per 4.6.2 of
JIS C 5101-10
Measurements shall be made under the
conditions specified in Table 2.
5A, AN
C N
F N
<
Rated voltage=25V
tan δ 3.0%
<
Rated voltage=16V
tan δ 5.0%
<
Rated voltage=6.3V
tan δ 10.0%
Rated voltage=16V
tan δ 10.0%
<
−
−
−
<
Capacitance 30pF
tan δ 100/(400+20C)%
<
Capacitance 30pF
tan δ 0.1%
−
−
−
−
<
<
MCH03
Ceramic capacitors
Rev.A 5/12
Resistance
to solderin
heat
As per 4.14 of
JIS C 5101-1.
As per 4.10 of
JIS C 5101-10
The solder specified in JIS Z 3282. H63A
shall be used.
The specimens shall be immersed into the
solder at 260+/−5
°C for
5+/−0.5s so that
both end terminations are completely
under the solder.
Pre-heating at 150+/−10
°C for 1 to 2min
Initial measurements prior to test shall be
performed after the thermal
Pre-conditioning specified in Remarks (1).
Final measurements shall be made after the
specimens have been left at room
temperature as per Table3.
As per 4.13 of JIS C 5101-1.
As per 4.8 ofJIS C 5101-10
A 2N weight for
10+/−1s shall be applied
to the soldered specimens as shown by the
arrow mark in the below sketch.
8
End termination
adherence
9
C N
F N
Within +/−2.5% or
+/−0.25pF whichever
is larger.
Within +/−7.5%
Within +/−20%
Appearance
Dielectric
loss
tangent
Within specified initial value.
Insulation
resistance Within specified initial value.
Withstanding
voltage
No defects shall be allowed.
Without peeling or sign of
peeling shall be allowed
on the end terminations.
Change
rate from
initial value
Without mechanical damage.
Table3
24+/−2 h
48+/−4 h
Charac-
teristic
Time
A, AN
CN, FN
Applied pressure
Capacitor
Substrate
Items Performance Test Method
(As per JIS C 5101-1, JIS C 5101-10)
As per 4.24 of JIS C 5101-1.
As per 4.7 of JIS C 5101-10
Temperature coefficient shall be calculated
at 20°C and 85°C.
As per 4.24 of JIS C 5101-1.
As per 4.7 of JIS C 5101-10
If required, measurements shall be made
at a given temperature.
As per 4.15.2 of JIS C 5101-1.
As per 4.11 of JIS C 5101-10
The solder specified in JIS Z 3282 H63A
shall be used. Ans the flux containing 25%
rosin and ethanol solution shall be used.
The specimens shall be immersed into the
solder at 235+/−5°C for 2+/−0.5s
So that both end terminations are
completely under solder.
No.
Temperature
characteristic
More than 3/4 of each end
termination shall be covered with
new solder.
6
Solderability
7
C N
F N
Capacitance C 2pF
0+/−250ppm/
°C
Capacitance C=3pF
0+/−120ppm/
°C
Capacitance C 4pF
0+/−60ppm/
°C
(−55°C to +125°C)
+/−15%
(−55°C to +125°C)
+30%, −80%
(−25°C to +85°C)
+22%, −82%
(−30°C to +85°C)
+/−10%
(−25°C to +85°C)
+/−15%
(−55°C to +85°C)
X7R
R
X5R
B
A, AN
A, AN
<
−
<
−
MCH03
Ceramic capacitors
Rev.A 6/12
Items Performance
Vibration
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
As per 4.17 of
JIS C 5101-1
The specimens shall be soldered on the
specified test jig.
Initial measurements shall be made after
the thermal pre-conditioning specified in
Remarks(1).
Final measurements shall be made after the
specimens have been left at room
temperature as per Table3.
[Condition]
Directions : 2h each X, Y and Z directions
Total : 6h
Frequency range : 10 to 55 to 10Hz(1min)
Applitude : 1.5mm
(shall not exceed acceleration196m/s
2
)
As per 4.16 of JIS C 5101-1
As per 4.12 of JIS C 5101-10
The specimens shall be soldered on the test
jig shown in Remarks.
Temperature cycle : 5cycles Initial
measurements prior to test shall be
performed after the thermal
per-conditioning specified in Remarks (1).
Final measurements shall be made after the
specimens have been left at room
temperature as per Table3.
No.
11
Temperature
cycling
12
Dielectric
loss
tangent
A, AN
C N
C N
F N
F N
Capacitance shall be
within specified
tolerance range.
Within +/−7.5%
Within +/−7.5%
Within +/−10.0%
Within +/−20%
Within +/−20%
Within +/−2.5% or
+/−0.25pF whichever
is larger.
Appearance
Dielectric
loss
tangent
Within specified initial value.
Change
rate from
initial value
A, AN
Change
rate from
initial value
Without mechanical damage.
Without mechanical damage.
Appearance
Within specified initial value.
Insulation
resistance Within specified initial value.
Withstanding
voltage
No defects shall be allowed.
Rated
voltage
25V,16V
Rated
voltage
6.3V
Table3
24+/−2 h
48+/−4 h
Charac-
teristic
Time
A, AN
CN, FN
Table3
24+/−2 h
48+/−4 h
Charac-
teristic
Time
A, AN
CN, FN
30+/−3
30+/−3
Test condition
Step
1
2
3
4
Temp. (°C) Time (min)
Min operating temp.
Room temp.
Room temp.
Max operating temp.
3
<
−
3
<
−
As per 4.35 of JIS C 5101-1.
As per 4.9 of JIS C 5101-10
Glass epoxy board with soldered
specimens shall be bent till 1mm by
1.0mm/s.
Bending
strength
10
Appearance
Without mechanical damage.
MCH03
Ceramic capacitors
Rev.A 7/12
Items Performance
Humidity
(Steady)
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
As per 4.22 of
JIS C 5101-1
JIS C 5101-10
Test temperature : 60+/−2°C
Relative humidity : 90 to 95%
Test time : 500 +24/−0 h
Initial measurements prior to test shall
be made after the voltage
pre-conditioning specified in
Remarks (2).
Final measurements have been left at
room temperature as per Table3.
As per 4.22 of JIS C 5101-1
As per 4.14 of JIS C 5101-10
Test temperature : 60+/−2°C
Relative humidity : 90 to 95%
Voltage
: Rated voltage
Test time : 500 +24/−0 h
Initial measurements prior to test shall
be made after the voltage
pre-conditioning specified in
Remarks (2).
Final measurements shall be made after
the specimens have been left at room
temperature as per Table3.
No.
13
Humidity
life test
14
Dielectric
loss
tangent
A, AN
A, AN
F N
F N
Within +/−12.5%
Within +/−5.0% or
+/−0.5pF whichever
is larger.
Within +/−25.0%
Within +/−30.0%
Appearance
Dielectric
tangent
Insulation
resistance
Change
rate from
initial value
Without mechanical damage.
C N
C N
Less than 200% of
initial spec.
Less than 150% of
initial spec.
Less than 200% of
initial spec.
Less than 150% of
initial spec.
A, AN
A, AN
F N
F N
Within +/−7.5% or
+/−0.75pF whichever
is larger.
Appearance
Insulation
resistance
Change
rate from
initial value
Without mechanical damage.
C N
C N
Not less than 1000MΩ or
50MΩ µF, whichever is less.
(For products with rated
voltage less than 16V, it is not less
than 1000MΩ or 10MΩ µF,
whichever is less.)
Rated
voltage
25V,16V
Rated
voltage
6.3V
Table3
24+/−2 h
48+/−4 h
Charac-
teristic
Time
A, AN
CN, FN
Table3
24+/−2 h
48+/−4 h
Charac-
teristic
Time
A, AN
CN, FN
tan δ 0.3%
<
−
tan δ 0.5%
<
−
Within +/−12.5%
Within +/−25.0%
Within +/−30.0%
Rated
voltage
25V,16V
Rated
voltage
6.3V
Not less than 500MΩ or
25MΩ µF, whichever is less.
(For products with rated voltage less
than 16V, it is not less than 500mΩ
or 5MΩ µF, whichever is less.)
MCH03
Ceramic capacitors
Rev.A 8/12
Items Performance
Heat life
test
Test Method
(As per JIS C 5101-1, JIS C 5101-10)
No.
15
A, AN
A, AN
F N
F N
Within +/−30.0%
Appearance
Dielectric
loss
tangent
Insulation
resistance
Change
rate from
initial value
Without mechanical damage.
C N
C N
Not less than 1000MΩ or
50MΩ µF, whichever is less.
(For products with rated voltage less
than 16V, it is not less than 1000mΩ
or 10MΩ µF, whichever is less.)
As per 4.23 of JIS C 5101-1.
As per 4.15 of JIS C 5101-10
Test
temperature
(°C)Voltage Test
time (h)
A, AN 125
85
(B, X5R)
200%
Rated
voltage
200%
Rated
voltage
200%
Rated
voltage
200%
Rated
voltage
1000
+48/−0
1000
+48/−0
1000
+48/−0
125
(R, X7R)
85
CN
FN
Initial measurements prior to test shall be
made after the voltage pre-conditioning
specified in Remarks (2).
Final measurements shall be made after
the specimens have been left at room
temperature
[Remarks]
Pre-conditioning
If specified in test method of as per 3(Performance and test merhod), capacitors of CN, FN
characteristics shall be pre-conditionded as follows.
(1) Thermal pre-conditioning
Prior to initial measurements, specimens shall be conditioned at a temperature of 150 0/−10°C
for a period of 1hr., and shall be allowed to stabilize at room temperature for 48+/−4h
(2) Voltage pre-conditioning
Prior to initial measurements, voltage specified as a test condition shall be applied to specimens
for a period of 1hr., and the specimens shall be allowed to stabilize at room temperature for 48+/−4h
Soldering
Glass epoxy
substrate
< T e s t j i g >
Within +/−15.0%
Within +/−25.0%
Within +/−3.0% or
+/−0.3pF whichever
is larger.
Rated
voltage
25V,16V
Rated
voltage
6.3V
tan δ 0.3%
<
−
Less than 200% of
initial spec.
Less than 150% of
initial spec.
Table3
24+/−2 h
48+/−4 h
Charac-
teristic
Time
A, AN
CN, FN
MCH03
Ceramic capacitors
Rev.A 9/12
zPackaging specifications
Taping dimensions Reel dimensions
Symbol
Dimensions
0.37
+/ −0.03 0.67
+/ −0.03
+/ −0.2
8.0 +/ −0.05
3.5 +/ −0.1
1.75 +/ −0.05
2.0 +/ −0.1
4.0 +0.1/ −0
φ1.5
+/ −0.05
2.0
(Unit : mm)
(Unit : mm)
Symbol
Style
φ60.0+1.0
−0
+1.0
−0
+0
−1.5
φ180
9.0
Label pasting
As per
EIAJ ET−7200A
Pulling direction
φ13.0 0.2
+
−
φ
J
FGH
E
DC
Pulling direction
t
t
1
CDEFGHJ
td
d
0.37
+/ −0.02 0.42
+/ −0.02
t
1
0.5
MAX.
MCH03
AB
(Unit : mm)
A
B
(1) The quantity for one reel is as bellows.
(2) When the tape is pulled out towards the operator with the cover tape facing
upward, the feeding holes shall be found on the right portion of the tape.
(3) Specification of beginning and ending of the tape are as follows.
(4) No juncture of tape shall be allowed.
(5) The share strength of tape shall be more than 5N at the break down strength.
(6) The peel strength of the cover tape shall be 0.1 to 0.7(N) when the cover tape are
peeled 0 to 15
°
degree from the surface.
(7) The number of missing components shall not exceed 0.1% of the total number
of components (marked number) or one whichever is the larger, and no consecutive
missing exceeding two is allowed.
(8) The reels made from resin shall be used, as per EIAJ ET-7200A.
Kind of reel Series Paper tape
Quantity Symbol
φ180 reel MCH03
15,000 pcs.
K
Ending(reel's center) : Approx. 300mm (no chips)
Beginning(reel's round) : Approx. 270mm (no chips)
: Approx. 30mm (no pasted tape)
: Approx. 260mm (cover tape only)
zMarking
No marking shall be performed on the chip.
T rademark, parts number, quantity, lot No. , and country of origin shall be labeled on each reel, bulk case.
zNumbering system for LOT No.
Example
(1)
03 (2)
01 (4)
J
(3)
A0001
(1) The end of the Christian Era <
two digits> of production finish.
(2) Week in completing part of production finish.
(3) Manufacture continuity number.
(4) The symbol of manufacturing plant.
MCH03
Ceramic capacitors
Rev.A 10/12
zLabel expression
The Figure below is label expression
< Label Example > Part Number : MCH032A470JK
ＪＡＰＡＮ Excellence ｉｎ Ｅｌｅｃｔｒｏｎｉｃｓ ROHM
□　15,000pcs 　0501 00001Ｆ
Ｋ．ＳＡＴＯ
MCH032A470JK
①
0123456789ABCDEFGHI J0123456789ABCDEFGHI J
②
③
④
⑤
⑥
⑦
⑧
ＪＡＰＡＮ Excellence ｉｎ Ｅｌｅｃｔｒｏｎｉｃｓ ROHM
□　15,000pcs 　0501 00001Ｆ
Ｋ．ＳＡＴＯ
MCH032A470JK
①
0123456789ABCDEFGHI J0123456789ABCDEFGHI J
②
③
④
⑤
⑥
⑦
⑧
① Part Number
② Division cord
③ Quantity
④ Lot No.
⑤ The Country of origin
⑥ Inspector
⑦ QR code
⑧ Trademark
MCH03
Ceramic capacitors
Rev.A 11/12
zPacking method
1) φ180mm Reel
(R-26)
(interior box of R-26)
C
B
A
A'
B' C'
1
2
[width of 9mm : 5reel]
EIAJ cole
Label
(reel)
Packing slip
< Packaging unit >
< Appearance >
Symbol K
Quantity of reel in
interior box 5
Quantity of reel in
box of R-26 20
Packaging Dimensions R-26 interior box of R-26
A (A’) 195 185
B (B’) 255 60
C (C’) 190 185
(Unit : mm)
Carton
< Accumulation >
You must do accumulation by ten boxes
< Packaging slip >
1. Customer
2. Parts number
3. Quantity
4. Box quantity
5. Trade mark
zWeight / Piece
Size
0603 (0201)
Item
MCH03
Characteristic
A, AN
CN
FN
Weight / Piece
0.3
0.3
0.3
Thickness
0.3mm
(Unit : mg)
(Note) The measured values in the table are for reference only.
Actual weight of these chips may very slightly lot by lot.
MCH03
Ceramic capacitors
Rev.A 12/12
zElectrical characteristics
gA (C0G) Characteristics
−
5
−
4
−
3
−
2
−
1
0
1
2
3
4
5
100500
−
50
TEMPERATURE (°C)
RATE OF CAPACITANCE CHANGE : (%)
Fig.1 Capacitance-temperature
characteristics
Fig.2 Impedance-frequency
characteristics
1000000
100000
10000
1000
100
10
1
0.1
IMPEDANCE (Ω)
1 10 100 1000 10000
FREQUENCY (MHz)
0.5pF
10pF
gCN (X7R) Characteristics
Fig.3 Capacitance-temperature
characteristics
30
20
10
0
−10
−20
−30
5
10
CAPACITANCE CHANGE : (%)
Dissipation factor (%)
−80 −40 0 40 80 120 160
TEMPERATURE : (°C)
Fig.4 Impedance-frequency
characteristics
1000000
100000
10000
1000
100
10
1
0.1
IMPEDANCE (Ω)
1 10 100 1000 10000
FREQUENCY (MHz)
1000pF
gFN (Y5V) Characteristics
Fig.5 Capacitance-temperature
characteristics
20
10
0
−10
−20
−30
−40
−50
−60
−70
−80
10
20
30
40
50
60
CAPACITANCE CHANGE : (%)
Dissipation factor (%)
−80 −40 0 40 80 120 160
TEMPERATURE : (°C)
Appendix
Appendix1-Rev1.1
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.