Product Standards
Zener Diode
DZ2724000L
Absolute Maximum Ratings Ta = 25 C
*1: Mounted on glass epoxy print board. ( 45 mm x 45 mm x 1 mm)
Solder in ( 0.4 mm x 0.3 mm)
*2:
Electrical Characteristics Ta = 25 C 3 C
1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 Measuring methods for Diodes.
2. Absolute frequency of input and output is 5 MHz.
3. *1 The temperature must be controlled 25 °C for VZ mesurement.
VZ value measured at other temperature must be adjusted to VZ (25 °C)
*2 VZ guaranted 20 ms after current flow.
*3 Tj = 25 °C to 150 °C
Page
Note)
Note)
Test method:IEC61000_4_2(C = 150 pF,R = 330 , Contact discharge:10 times)
+85 °COperating ambient temperature Topr -40 to
Temperature coefficient of zener voltage *3
Internal Connection
24.0 mV/°C
V
100
22.80
Max
25.20
1.0 V
Parameter Symbol Conditions
Forward voltage VF IF = 10 mA
Unit
kV
Junction temperature Tj 150 °C
1of4
Unit: mm
Min Typ
SSSMini2-F4-B
JEITA SC-104A
2. Anode
Low zener operating resistance Rz
Excellent rising characteristics of zener current Iz
Halogen-free / RoHS compliant
DZ2724000L
Silicon epitaxial planar type
For constant voltage / For surge absorption circuit
DZ2S240 in SSSMini2 type package
Features
(EU RoHS / UL-94 V-0 / MSL:Level 1 compliant)
Marking Symbol
:
DG
Code
1. Cathode
SOD-723
Panasonic
Zener rise operating resistance
Packaging
Embossed type (Thermo-compression sealing) 10 000 pcs / reel (standard)
Parameter Symbol Rating Unit
±8
SZ IZ = 5 mA
Zener voltage *1, *2 VZ IZ = 5 mA
Zener operating resistance RZ IZ = 5 mA
Reverse current
Storage temperature Tstg -55 to
Repetitive peak forward current IFRM 200 mA
RZK IZ = 0.5 mA
Total power dissipation *1 PT 120 mW
Electrostatic discharge *2 ESD
+150 °C
120
0.05 μAIR VR = 19 V
1.4
0.6
0.52
1.0
0.27
0.13
2
1
1
2
Doc No.
TT4-EA-12371
Revision.
3
Established
:
2010-02-19
Revised
:
2013-10-16
Product Standards
Zener Diode
DZ2724000L
Technical Data ( reference )
Page 2 of 4
PT - Ta
0
50
100
150
200
0 20 40 60 80 100 120 140 160 180 200
Ambient temperature Ta (°C)
Total power dissipation PT (mW)
Mounted on glass epoxy print board.
Board size : 45 mm × 45 mm x 1 mm
Solder in : 0.4 mm x 0.3 mm
IF - VF
1.E-06
1.E-05
1.E-04
1.E-03
1.E-02
1.E-01
1.E+00
0.0 0.2 0.4 0.6 0.8 1.0 1.2
Forward voltage VF (V)
Forward current IF (A)
Ta = 25 °C
IR - VR
1.E-12
1.E-11
1.E-10
1.E-09
1.E-08
1.E-07
1.E-06
0 5 10 15 20
Reverse voltage VR (V)
Reverse current IR (A)
Ta = 25 °C
IZ - VZ
1.E-06
1.E-05
1.E-04
1.E-03
1.E-02
1.E-01
10 15 20 25 30 35
Zener voltage VZ (V)
Zener current IZ (A)
Ta = 125 °C
85 °C
-40 °C
25 °C
SZ - IZ
0
5
10
15
20
25
30
35
0246810
Zener current IZ (mA)
Temparature coefficient of zener
voltage SZ (mV/°C)
RZ-IZ
1
10
100
0.0001 0.001 0.01 0.1
Zener current IZ (A)
Zener operating resistance RZ )
Ta = 25 °C
Doc No.
TT4-EA-12371
Revision.
3
Established
:
2010-02-19
Revised
:
2013-10-16
Product Standards
Zener Diode
DZ2724000L
Technical Data ( reference )
Page 3 of 4
Rth - t
1
10
100
1000
0.001 0.01 0.1 1 10 100 1000
Time t (s)
Thermal resistance Rth (°C/W)
(1)
Rth(j-l) = 100 °C/W
(1) Non-heat sink
(2) Mounted on glass epoxy print board.
Board size : 45 mm × 45 mm x 1 mm
Solder in : 0.4 mm x 0.3 mm
(2)
PZSM - tw
0.1
1
10
100
100 1000 10000
Pulse width tw (μs)
Non-repetitive reverse surge power
dissipation PZSM (W)
Ta = 25 °C
Ct - VR
0
2
4
6
8
10
12
14
16
0 5 10 15 20
Reverse voltage VR (V)
Terminal capacitance Ct (pF)
Ta = 25 °C
f = 1 MHz
Doc No.
TT4-EA-12371
Revision.
3
Established
:
2010-02-19
Revised
:
2013-10-16
Product Standards
Zener Diode
DZ2724000L
Unit: mm
Page
SSSMini2-F4-B
4
4of
Land Pattern (Reference) (Unit: mm)
0 to 0.05
1.40
±0.05
0.27
+0.05
-0.03
0.13
+0.05
-0.02
0.20
±0.05
0.52
±0.03
(0.27)
0.60
±0.05
1.00
±0.05
(5°)
(5°)
1
2
0.3
0.4
1.3
0.3
Doc No.
TT4-EA-12371
Revision.
3
Established
:
2010-02-19
Revised
:
2013-10-16
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any
other company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for general applications (such as office equipment, communications
equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book.
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment,
life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of
the products may directly jeopardize life or harm the human body.
It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with
your using the products described in this book for any special application, unless our company agrees to your using the products in
this book for any special application.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.
20100202
