(Standard type) GU (General Use) Type [1-Channel (Form A) Type] VDE TESTING (Reinforced type) PhotoMOS RELAYS FEATURES 6.40.05 .252.002 8.80.05 .346.002 3.90.2 .154.008 6.40.05 .252.002 3.60.2 .142.008 8.80.05 .346.002 mm inch 1. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 2. Control with low-level input signals 3. Controls various types of loads such as relays, motors, lamps and solenoids. 4. Optical coupling for extremely high isolation Unlike mechanical relays, the PhotoMOS relay combines LED and optoelectronic device to transfer signals using light for extremely high isolation. 5. Eliminates the need for a counter electromotive force protection diode in the drive circuits on the input side 6. Stable on resistance 7. Low-level off state leakage current 8. Eliminates the need for a power supply to drive the power MOSFET A power supply used to drive the power MOSFET is unnecessary because of the built-in optoelectronic device. This results in easy circuit design and small PC board area. 9. Low thermal electromotive force (Approx. 1 V) TYPICAL APPLICATIONS * High-speed inspection machines * Telephone equipment * Data communication equipment * Computer TYPES Part No. Output rating* Type I/O isolation Standard 1,500 V AC AC/DC Reinforced 5,000 V Through hole terminal Packing quantity Surface-mount terminal Load voltage Load current 60V 400 mA AQV212 AQV212A 100 V 200 V 350 V 400 V 600 V 400 V 320 mA 180 mA 130 mA 120 mA 50 mA 120 mA AQV215 AQV217 AQV210 AQV214 AQV216 AQV214H AQV215A AQV217A AQV210A AQV214A AQV216A AQV214HA Tube packing style Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side AQV212AX AQV212AZ AQV215AX AQV217AX AQV210AX AQV214AX AQV216AX AQV214HAX AQV215AZ AQV217AZ AQV210AZ AQV214AZ AQV216AZ AQV214HAZ Tube Tape and reel 1 tube contains 50 pcs. 1 batch contains 500 pcs. 1,000 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Input Item LED forward current LED reverse voltage Peak forward current Power dissipation Output Load voltage (peak AC) Continuous load current Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature limits 464 Operating Storage Type of SymRemarks connec- AQV212(A) AQV215(A) AQV217(A) AQV210(A) AQV214(A) AQV216(A) AQV214H(A) bol tion 50 mA IF VR 3V IFP 1A f = 100 Hz, Duty factor = 0.1% Pin 75 mW 60 V 100 V 200 V 350 V 400 V 600 V 400 V VL A 0.40 A 0.32 A 0.18 A 0.13 A 0.12 A 0.05 A 0.12 A A connection: Peak AC, DC; IL B 0.60 A 0.42 A 0.22 A 0.15 A 0.13 A 0.06 A 0.13 A B, C connection: DC C 0.80 A 0.60 A 0.30 A 0.17 A 0.15 A 0.08 A 0.15 A A connection: 100 ms (1 shot), 1.2 A 0.96 A 0.54 A 0.4 A 0.3 A 0.15 A 0.3 A Ipeak VL=DC Pout 500 mW PT 550 mW Viso 1,500 V AC -40C to +85C -40F to +185F Non-condensing at low temp. Topr Tstg -40C to +100C -40F to +212F AQV21 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Input LED operate current LED turn off current LED dropout voltage Output On resistance Output capacitance Transfer characteristics Off state leakage current Switching speed Turn on time* Turn off time* Type of SymCondition connec- AQV212(A) AQV215(A) AQV217(A) AQV210(A) AQV214(A) AQV216(A) AQV214H(A) bol tion** 1 mA 1 mA 1 mA 1 mA 1 mA 1 mA 1.3 mA Typical -- IL = Max. IFon Maximum 3 mA 3 mA 3 mA 3 mA 3 mA 3 mA 3 mA Minimum 0.4 mA 0.4 mA 0.4 mA 0.4 mA 0.4 mA 0.4 mA 0.4 mA IFoff -- IL = Max. Typical 0.79 mA 0.79 mA 0.79 mA 0.79 mA 0.79 mA 0.79 mA 1.2 mA Typical 1.14 V (1.25 V at IF = 50 mA) VF -- IF = 5 mA Maximum 1.5 V IF = 5 mA 0.83 2.3 11.0 23 30 70 30 Typical A IL = Max. Ron Maximum 2.5 4.0 15.0 35 50 120 50 Within 1 s on time IF = 5 mA 0.44 1.15 5.5 11.5 22.5 55 22.5 Typical B Ron IL = Max. Maximum 1.25 2.0 7.5 17.5 25 100 25 Within 1 s on time IF = 5 mA 0.25 0.6 2.8 6.0 11.3 28 11.3 Typical C Ron IL = Max. Maximum 1.63 1.0 3.8 8.8 12.5 50 12.5 Within 1 s on time IF = 0 Typical Cout A 150 pF 110 pF 70 pF 45 pF 45 pF 45 pF 45 pF VB = 0 f = 1 MHz IF = 0 Maximum -- -- 1 A VL = Max. 0.65 ms 0.6 ms 0.25 ms 0.25 ms 0.21 ms 0.28 ms 0.6 ms Typical IF= 5 mA** -- Ton lL=Max. Maximum 2 ms 2 ms 1.0 ms 0.5 ms 0.5 ms 0.5 ms 0.8 ms 0.08 ms 0.06 ms 0.05 ms 0.05 ms 0.05 ms 0.04 ms 0.05 ms IF = 5 mA Typical -- Toff IL = Max. Maximum 0.2 ms 0.2 ms 0.2 ms 0.2 ms 0.2 ms 0.2 ms 0.2 ms I/O capacitance Typical Maximum Ciso -- 0.8 pF 1.5 pF f = 1 MHz VB = 0 Initial I/O isolation resistance Minimum Riso -- 1,000 M 500 V DC Note: Recommendable LED forward current Standard type: 5 mA Reinforced type: 5 to 10 mA *Turn on/Turn off time < >: Value for high I/O isolation voltage type **Type of connection, see Page 444. Input 90% Output 10% Toff Ton For Dimensions, see Page 440. For Schematic and Wiring Diagrams, see Page 444. For Cautions for Use, see Page 449. REFERENCE DATA 1-(1). Load current vs. ambient temperature characteristics 1-(2). Load current vs. ambient temperature characteristics 2-(1). On resistance vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Type of connection: A Allowable ambient temperature: -40C to +85C -40F to +185F Type of connection: A Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC) Continuous load current: Max. (DC) 0.7 140 0.6 120 0.5 100 5 AQV210 AQV214(H) AQV212 AQV215 0.3 0.2 AQV217 80 60 AQV216 On resistance, 0.4 Load current, mA Load current, A 4 AQV215 3 2 40 AQV212 1 0.1 0 -40 -20 20 0 20 40 60 8085 100 Ambient temperature, C 0 -40 -20 0 20 40 60 8085 100 Ambient temperature, C 0 -40 -20 0 20 40 60 8085 Ambient temperature, C 465 AQV21 2-(2). On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics 4. Turn off time vs. ambient temperature characteristics Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC) Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 120 100 80 60 AQV214(H) 40 AQV210 1.5 AQV212,AQV215 1.0 AQV214H AQV216,AQV210,AQV217 Turn off time, ms AQV216 Turn on time, ms On resistance, 0.4 2.0 0.3 0.2 AQV214H AQV212,215 0.1 0.5 AQV216,210,217 20 AQV214 0 -40 -20 AQV214 AQV217 0 20 40 60 8085 Ambient temperature, C 0 -40 -20 0 0 20 40 60 8085 Ambient temperature, C -40 -20 0 20 40 60 Ambient temperature, C 8085 5-(1). LED operate current vs.ambient temperature characteristics 5-(2). LED operate current vs.ambient temperature characteristics 6-(1). LED turn off current vs. ambient temperature characteristics Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) AQV212 AQV215 AQV217 AQV210 3 2 AQV214 AQV216 1 -40 -20 4 3 AQV214H 2 LED turn off current, mA 4 0 5 5 LED operate on current, mA LED operate on current, mA 5 3 2 1 1 0 0 20 40 60 8085 Ambient temperature, C 4 -40 -20 0 0 20 40 60 8085 Ambient temperature, C -40 -20 0 20 40 60 8085 Ambient temperature, C 6-(2). LED turn off current vs. ambient temperature characteristics 7. LED dropout voltage vs. ambient temperature characteristics 8-(1). Voltage vs. current characteristics of output at MOS portion Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: All types LED current: 5 to 50 mA Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F 0.5 4 3 AQV214H 2 Current, A 1.5 LED dropout voltage, V LED turn off current, mA 5 1.4 1.3 -0.2 -0.3 1.0 0 20 40 60 8085 Ambient temperature, C 8-(2). Voltage vs. current characteristics of output at MOS portion Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F Current, mA -40 -20 9. Off state leakage current Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F 10-(1). LED forward current vs. turn on time characteristics Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F AQV217 160 AQV210 AQV214(H) 120 80 AQV216 40 -3 -2 -1 1 -40 -80 2 3 4 Voltage, V 5 10-3 1.0 10-6 10-9 -160 -200 0.8 AQV212,AQV215 0.6 AQV210,AQV216,AQV217 0.4 AQV216 AQV214(H) -120 466 -0.5 0 20 40 60 8085 Ambient temperature, C 1.2 200 -5 -4 -0.4 Turn on time, ms -20 Off state leakage current, A -40 0.2 0.2 0.4 0.6 0.8 1.0 -0.1 Voltage, V 50mA 30mA 20mA 10mA 5mA 1.1 0 AQV215 0.3 0.1 -1.0 -0.8 -0.6 -0.4 -0.2 1.2 1 0 AQV212 0.4 0.2 AQV214 10-12 0 20 60 40 80 Load voltage, V 100 0 10 50 20 30 40 LED forward current, mA 60 AQV21 10-(2). LED forward current vs. turn on time characteristics 11. LED forward current vs. turn off time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 4 and 6; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC); Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25C 77F 2.5 Turn off time, ms 1.5 1.0 AQV212 0.08 AQV215 0.06 AQV214H AQV216 0.04 AQV210,214,217 0.5 9/1/2000 150 100 AQV214(H),AQV216,AQV210 AQV217 50 0.02 AQV214H 0 Output capacitance, pF 0.10 2.0 Turn on time, ms 200 0.12 10 20 30 40 50 LED forward current, mA 60 0 AQV215 10 50 20 30 40 LED forward current, mA 0 0 10 AQV212 20 30 40 Applied voltage,V 50 All Rights Reserved, (c) Copyright Matsushita Electric Works, 467 Ltd. Go To Online Catalog