PD - 95200 IRF7342PbF Generation V Technology l Ultra Low On-Resistance l Dual P-Channel Mosfet l Surface Mount l Available in Tape & Reel l Dynamic dv/dt Rating l Fast Switching l Lead-Free Description HEXFET(R) Power MOSFET l S1 1 8 D1 G1 2 7 D1 S2 3 6 D2 4 5 D2 G2 VDSS = -55V RDS(on) = 0.105 Top View Fifth Generation HEXFETs from International Rectifier utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET Power MOSFETs are well known for, provides the designer with an extremely efficient and reliable device for use in a wide variety of applications. The SO-8 has been modified through a customized leadframe for enhanced thermal characteristics and multiple-die capability making it ideal in a variety of power applications. With these improvements, multiple devices can be used in an application with dramatically reduced board space. The package is designed for vapor phase, infra red, or wave soldering techniques. Power dissipation of greater than 0.8W is possible in a typical PCB mount application. SO-8 Absolute Maximum Ratings Parameter VDS ID @ TC = 25C ID @ TC = 70C IDM PD @TC = 25C PD @TC = 70C VGS VGSM EAS dv/dt TJ, TSTG Drain- Source Voltage Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Power Dissipation Linear Derating Factor Gate-to-Source Voltage Gate-to-Source Voltage Single Pulse tp<10s Single Pulse Avalanche Energy Peak Diode Recovery dv/dt Junction and Storage Temperature Range Max. Units -55 -3.4 -2.7 -27 2.0 1.3 0.016 20 30 114 5.0 -55 to + 150 V A W W/C V V V/ns C Thermal Resistance Parameter RJA www.irf.com Maximum Junction-to-Ambient Typ. Max. Units --- 62.5 C/W 1 10/7/04 IRF7342PbF Electrical Characteristics @ TJ = 25C (unless otherwise specified) V(BR)DSS/TJ Parameter Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient RDS(on) Static Drain-to-Source On-Resistance VGS(th) gfs Gate Threshold Voltage Forward Transconductance IDSS Drain-to-Source Leakage Current V(BR)DSS IGSS Qg Qgs Qgd td(on) tr td(off) tf Ciss Coss Crss Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Min. -55 --- --- --- -1.0 3.3 --- --- --- --- --- --- --- --- --- --- --- --- --- --- Typ. Max. Units Conditions --- --- V VGS = 0V, ID = -250A -0.054 --- V/C Reference to 25C, ID = -1mA 0.095 0.105 VGS = -10V, ID = -3.4A 0.150 0.170 VGS = -4.5V, ID = -2.7A --- --- V VDS = VGS, ID = -250A --- --- S VDS = -10V, ID = -3.1A --- -2.0 VDS = -55V, VGS = 0V A --- -25 VDS = -55V, VGS = 0V, TJ = 55C --- -100 VGS = -20V nA --- 100 VGS = 20V 26 38 ID = -3.1A 3.0 4.5 nC VDS = -44V 8.4 13 VGS = -10V, See Fig. 10 14 22 VDD = -28V 10 15 ID = -1.0A ns 43 64 RG = 6.0 22 32 RD = 16, 690 --- VGS = 0V 210 --- pF VDS = -25V 86 --- = 1.0MHz, See Fig. 9 Source-Drain Ratings and Characteristics IS ISM VSD trr Qrr Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse RecoveryCharge Min. Typ. Max. Units -2.0 -27 --- --- --- --- 54 85 -1.2 80 130 A V ns nC Conditions MOSFET symbol showing the G integral reverse p-n junction diode. TJ = 25C, IS = -2.0A, VGS = 0V TJ = 25C, IF = -2.0A di/dt = -100A/s D S Notes: Repetitive rating; pulse width limited by max. junction temperature. ( See fig. 11 ) Starting TJ = 25C, L = 20mH RG = 25, IAS = -3.4A. (See Figure 8) ISD -3.4A, di/dt -150A/s, VDD V(BR)DSS, TJ 150C Pulse width 300s; duty cycle 2%. When mounted on 1 inch square copper board, t<10 sec 2 www.irf.com IRF7342PbF 100 100 VGS -15V -12V -10V -8.0V -6.0V -4.5V -4.0V -3.5V BOTTOM -3.0V 10 -3.0V 1 20s PULSE WIDTH TJ = 25 C 0.1 0.1 1 10 10 -3.0V 1 1 10 100 -VDS , Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 100 -ISD , Reverse Drain Current (A) 100 -I D , Drain-to-Source Current (A) 20s PULSE WIDTH TJ = 150 C 0.1 0.1 100 -VDS , Drain-to-Source Voltage (V) TJ = 25 C TJ = 150 C 10 1 VGS -15V -12V -10V -8.0V -6.0V -4.5V -4.0V -3.5V BOTTOM -3.0V TOP -I D , Drain-to-Source Current (A) -I D , Drain-to-Source Current (A) TOP V DS = -25V 20s PULSE WIDTH 3 4 5 6 -VGS , Gate-to-Source Voltage (V) Fig 3. Typical Transfer Characteristics www.irf.com 7 10 TJ = 150 C TJ = 25 C 1 0.1 0.2 V GS = 0 V 0.4 0.6 0.8 1.0 1.2 1.4 -VSD ,Source-to-Drain Voltage (V) Fig 4. Typical Source-Drain Diode Forward Voltage 3 IRF7342PbF ID = -3.4 A R DS (on) , Drain-to-Source On Resistance() RDS(on) , Drain-to-Source On Resistance (Normalized) 2.0 1.5 1.0 0.5 0.0 -60 -40 -20 VGS = -10V 0 20 40 60 80 100 120 140 160 0.240 0.200 VGS = -4.5V 0.160 0.120 VGS = -10V 0.080 0 2 TJ , Junction Temperature ( C) 0.35 0.25 I D = -3.4 A 0.15 0.05 8 11 -V GS , Gate-to-Source Voltage (V) Fig 7. Typical On-Resistance Vs. Gate Voltage 4 14 A EAS , Single Pulse Avalanche Energy (mJ) RDS(on) , Drain-to-Source On Resistance ( ) 0.45 5 6 8 10 12 Fig 6. Typical On-Resistance Vs. Drain Current Fig 5. Normalized On-Resistance Vs. Temperature 2 4 -ID , Drain Current (A) 300 ID -1.5A -2.7A BOTTOM -3.4A TOP 250 200 150 100 50 0 25 50 75 100 125 Starting TJ , Junction Temperature ( C) 150 Fig 8. Maximum Avalanche Energy Vs. Drain Current www.irf.com IRF7342PbF 1200 -VGS , Gate-to-Source Voltage (V) 960 C, Capacitance (pF) 20 VGS = 0V, f = 1MHz Ciss = Cgs + Cgd , Cds SHORTED Crss = Cgd Coss = Cds + Cgd Ciss 720 480 Coss 240 Crss 0 1 10 --VDS , Drain-to-Source Voltage (V) VDS =-48V VDS =-30V VDS =-12V 16 12 8 4 0 100 ID = -3.1A 0 10 20 30 40 QG , Total Gate Charge (nC) Fig 10. Typical Gate Charge Vs. Gate-to-Source Voltage Fig 9. Typical Capacitance Vs. Drain-to-Source Voltage Thermal Response (Z thJA ) 100 D = 0.50 0.20 10 0.10 0.05 0.02 1 PDM 0.01 t1 SINGLE PULSE (THERMAL RESPONSE) t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJA + TA 0.1 0.0001 0.001 0.01 0.1 1 10 100 t1, Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient www.irf.com 5 IRF7342PbF SO-8 Package Outline Dimensions are shown in milimeters (inches) D DIM B 5 A A INCHES MAX MIN .0532 .0688 1.35 A1 .0040 6 8 7 6 5 1 2 3 4 H E 0.25 [.010] A e e1 8X b 0.10 0.25 .013 .020 0.33 0.51 c .0075 .0098 0.19 0.25 D .189 .1968 4.80 5.00 E .1497 .1574 3.80 4.00 e .050 BASIC 1.27 BASIC .025 BASIC 0.635 BAS IC H .2284 .2440 5.80 6.20 K .0099 .0196 0.25 0.50 L .016 .050 0.40 1.27 y 0 8 0 8 K x 45 A C 0.25 [.010] .0098 MAX 1.75 b e1 6X MILLIMET ERS MIN y 0.10 [.004] A1 8X L 8X c 7 C A B FOOT PRINT NOT ES : 1. DIMENS IONING & T OLERANCING PER AS ME Y14.5M-1994. 8X 0.72 [.028] 2. CONT ROLLING DIMENS ION: MILLIMETER 3. DIMENS IONS ARE SHOWN IN MILLIMET ERS [INCHES ]. 4. OUT LINE CONFORMS T O JEDEC OUT LINE MS-012AA. 5 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS . MOLD PROT RUSIONS NOT T O EXCEED 0.15 [.006]. 6 DIMENS ION DOES NOT INCLUDE MOLD PROT RUSIONS . MOLD PROT RUSIONS NOT T O EXCEED 0.25 [.010]. 6.46 [.255] 7 DIMENS ION IS T HE LENGT H OF LEAD FOR SOLDERING T O A S UBS T RAT E. 3X 1.27 [.050] 8X 1.78 [.070] SO-8 Part Marking Information (Lead-Free) EXAMPLE: T HIS IS AN IRF7101 (MOSFET ) INT ERNAT IONAL RECT IFIER LOGO XXXX F 7101 DAT E CODE (YWW) P = DES IGNAT ES LEAD-FREE PRODUCT (OPTIONAL) Y = LAST DIGIT OF T HE YEAR WW = WEEK A = AS SEMBLY S IT E CODE LOT CODE PART NUMBER 6 www.irf.com IRF7342PbF SO-8 Tape and Reel Dimensions are shown in milimeters (inches) TERMINAL NUMBER 1 12.3 ( .484 ) 11.7 ( .461 ) 8.1 ( .318 ) 7.9 ( .312 ) FEED DIRECTION NOTES: 1. CONTROLLING DIMENSION : MILLIMETER. 2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES). 3. OUTLINE CONFORMS TO EIA-481 & EIA-541. 330.00 (12.992) MAX. 14.40 ( .566 ) 12.40 ( .488 ) NOTES : 1. CONTROLLING DIMENSION : MILLIMETER. 2. OUTLINE CONFORMS TO EIA-481 & EIA-541. Data and specifications subject to change without notice. This product has been designed and qualified for the Consumer market. Qualifications Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.10/04 www.irf.com 7