CMD Series 4 Contact Row High Density Signal Connectors * Offset-grid contact layout, four contact rows within dielectric connector body, 1.905 mm center-to-center contact spacing in each row and 1.905 row-to-row spacing. * 0.6 mm nominal pin DIA contact size; 42 to 316 contact positions; dip solder and SMT soldering contact termination types. * High contact density, low connector weight, low mating force. High shock and vibration proof (no micro interruptions - test: 2ns). * Conforms to MIL-DTL-55302 general requirements, and TPR 02013. CSD conforms to ESA specification. * For Civil, Military, Aerospace and Space applications. Technical Characteristics APRIL Contact Number 42, 82, 110, 126, 158, 174, 220, 236, 316 Contact Diameter 0.6 mm nominal pin DIA Current Rating 3A Contact Resistance 5.0 m maximum individual Engagement/ Withdrawal Forces 0.6 N nominal per contact Contact Life Cycle 30.000 insertion and withdrawal cycles Dielectric Withstanding Voltage 750 VRMS, 60 Hz - sea level Temperature Range -65 C to +125 C Insulation Resistance >5x103 M at 500 V dc Insulator - thermoplastic according to MIL-M-24519 Type GST 40 F; V-0/5VA per UL 94 - ESA SCC 3401 Outgassing requirements compliance Contact - Material - Plating Brass & BeCu Gold Plate Hardware stainless steel passivated or beryllium-copper alloy nickel plated Plating Reference according to MIL-DTL-55302 requirements 2005 153 CMD Series Ordering Information CM D * * * * * * * * * CS D * * * * * * * * * * * Connector family Contact finishing Conforming to MIL-STD-55302 In agreement with ESA-SCC-3401 (4) Plating standard + tin dipping TS Plating standard T Plating conforming to MIL-DTL-55302 + tin dipping HS Plating confoming to MIL-DTL-55302 H CM CS Contact arrangement: four rows Connector size Hardware polarization 042-082-110-126-158-174-220-236-316 Guide type Y (pos.1 without Loctite) (3) 00 Guide type Y 01/36 Guide type P 37 Guide type K 39 Guide (type Y-P-K) shipped loose 38 Connector and contact style Plug Male Receptacle Female Contact terminal style PM EF (1) Right angle L= 2.76mm Right angle L= 3.55mm Right angle L= 4.37mm Wire Wrapp L= 15.87mm Straight through L= 2.76mm Straight through L= 3.55mm Straight through L= 4.37mm Straight through L= 5.94mm Flex-circuit (pcb 1.00/2.00) Flex-circuit (pcb 1.70/2.70) Flex-circuit (pcb 2.70/3.70) Flex-circuit (pcb 3.20/4.20) A B C Y D E G L N R T V Hardware code D-shape Universal coupling (for test type connector) Screw locking (2) (1) (2) (3) (4) Y P K Flex circuit contact terminal style is not avaiable for CSD family connector Hardware code type K for connector with flex circuit is not avaiable This polarization is avaiable only for plug and receptacle connector with flex circuit and plug connector with right angle terminal style For CSD family don't specify contact finishing CONTACT TERMINAL TYPES AVAILABLE ARE: CONTACT POSITION 154 DIP SOLDER CONNECTOR STYLE (STRAIGHT THRU) (RIGHT ANGLE) SURFACE MOUNT TAIL WIRE WRAP POST 42 Plug connector pin contacts equipped Receptacle connector socket contacts equipped Yes Yes Yes Yes Check Firm Check Firm No Yes 82 Plug connector pin contacts equipped Receptacle connector socket contacts equipped Yes Yes Yes Yes Check Firm Check Firm No Yes 110 Plug connector pin contacts equipped Receptacle connector socket contacts equipped Yes Yes Yes Yes Yes Check Firm No Yes 126 Plug connector pin contacts equipped Receptacle connector socket contacts equipped Yes Yes Yes Yes Check Firm Check Firm No Yes 158 Plug connector pin contacts equipped Receptacle connector socket contacts equipped Yes Yes Yes Yes Yes Yes No Yes 174 Plug connector pin contacts equipped Receptacle connector socket contacts equipped Yes Yes Yes Yes Yes Yes No Yes 220 Plug connector pin contacts equipped Receptacle connector socket contacts equipped Check Firm Yes Yes Yes Check Firm Check Firm No Yes 236 Plug connector pin contacts equipped Receptacle connector socket contacts equipped Check Firm Yes Yes Yes Yes Yes No Yes 316 Plug connector pin contacts equipped Receptacle connector socket contacts equipped Check Firm Yes Yes Yes Yes Yes No Yes APRIL 2005 CMD Series Plug connector 42 to 174 ways, dip solder, right angle, termination style A max 4.00 5.715 B LAST CONTACT POSITION B = A = 5.08 1.905 10.90 max A 1.905 CONTACT POSITION 1 B CONTACT POSITION 2 C B 8.00 8.00 O 2.70 THRU 5.08 ****** 19.40 max CMD***PM****H 11.05 14.32 2 PLACES D-SHAPED GUIDE PINS 6.86 M1.6 THREADED SCREW 4.30 L 3.80 0.700.10 L=2.76 L=3.55 L=4.37 +0.10 SEE DETAIL A 1.10 - 0.20 0.48 DIA 3.90 DETAIL A M1.6 THREADED NUT 1.905x3=5.715 SECTION B-B SECTION A-A Plug connector: 42,82,110,126,158,174, pin contact positions, 1.905 mm spacing, dip solder (right angle) termination style. COMPONENT SIDE O 0.70 min C 5.08 O 0.05 1.905 O 2.70 +0.10 0.00 (2 HOLES) LAST HOLE POSITION = = O 0.10 1.905 x3= 5.715 DIMENSIONS IN WIDTH contact positions A (mm) B (mm) C (mm) 042 082 110 126 158 174 37.210 56.260 69.595 77.215 92.455 100.075 29.210 48.260 61.595 69.215 84.455 92.075 19.050 38.100 51.435 59.055 74.295 81.915 N+1 B Mounting pattern, daughterboard application, (recommended PCB hole configuration). 9.70 max 2 1 7.15 1.905 N Dimensions are in mm APRIL 2005 155 CMD Series Plug connector 42 to 174 contacts, dip solder, straight through, termination style A max B 5.715 4.00 = 5.08 1.905 = CONTACT POSITION 1 1.905 0.65 mim C CONTACT POSITION 2 M2.50 THREADED SCREW 7.00 O 0.48 CMD***PM****H L 10.90 max = = LAST CONTACT POSITION L=2.76 L=3.55 ****** 10.61 max L=4.37 L=5.94 5.08 D-SHAPED GUIDE PINS Plug connector: 42, 82, 110, 126, 158, 174, pin contact positions, 1.905 mm spacing, dip solder (straight) termination style. COMPONENT SIDE C 5.08 O 0.70 min O 0.05 1.905 = +0.10 = O 2.70 0.00 (2 HOLES) DIMENSIONS IN WIDTH = O 0.10 N+1 N = 2 1 1.905 1.905 x3= 5.715 LAST HOLE POSITION B contact positions 042 082 110 126 158 174 A (mm) B (mm) C (mm) 37.210 56.260 69.595 77.215 29.210 48.260 61.595 69.215 19.050 38.100 51.435 59.055 92.455 100.075 84.455 92.075 74.295 81.915 Mounting pattern, in parallel arrangement board-to-board connection, (recommended PCB hole configuration). Dimensions are in mm 156 APRIL 2005 CMD Series Plug connector 42 to 174 contacts, surface mount termination style A max B 4.00 = 1.905 10.90 max = = 5.715 LAST CONTACT POSITION = 5.08 CONTACT POSITION 1 1.905 CONTACT POSITION 2 C B ****** 19.40 max 6.86 11.05 S CMD***PM****H S=0.75 mm S=1.10 mm S=1.60 mm S=1.85 mm D-SHAPED GUIDE PINS 5.08 14.32 M 2.5 2 PLACES Plug connector: 42, 82,110,126,158,174, pin contact positions, 1.905 mm spacing, board package thickness from 1.00 to 4.20 mm. SIDE OPPOSITE MATING FACE 2 N DIMENSIONS IN WIDTH contact positions 042 082 110 126 158 174 1 N+1 LAST TERMINAL POSITION A (mm) B (mm) C (mm) 37.210 56.260 69.595 77.215 92.455 100.075 29.210 48.260 61.595 69.215 84.455 92.075 19.050 38.100 51.435 59.055 74.295 81.915 Contact pattern numbering. 0.60 max 0.55 min = B 5.08 C EDGE OF BOARD O 2.70 min PCB MTG HOLE 2 PLACES 0.9525 CONNECTOR DIMENSIONS PCB SIDE B 5.00 min 4.10 max 0.9525 = VIEW SIDE A PCB SIDE A VIEW SIDE B Mounting pattern, daughterboard application. APRIL 2005 Dimensions are in mm 157 CMD Series Receptacle connector 42 to 174 contacts A 2.10 8.00 max A max D-SHAPED GUIDE SOCKETS L=2.76 L=3.55 L=4.37 L=5.94 CMD***EF****H 0.60 min 15.875 L ****** O 0.48 7.00 M2.50 THREADED SCREW 0.46 A VIEW A-A 10.90 max Dip solder, straight terminal equipped. B 4.00 VIEW A-A But wire wrap post terminal equipped. = = 1.905 CONTACT POSITION 2 5.715 CONTACT POSITION 1 LAST CONTACT POSITION = = 1.905 C Receptacle connector: 42,82,110,126,158,174, socket contact positions, 1.905 mm spacing, dip solder (straight), and wire wrap post termination style. COMPONENT SIDE C 5.08 0.05 1.905 = 1.905 x3= 5.715 O 0.70 min O 2.70 +0.10 0.00 (2 HOLES) = O 0.10 2 1 = N = N+1 1.905 LAST HOLE POSITION B 9.50 min Mounting pattern, motherboard application, (recommended PCB hole configuration). = D min = O 2.70 +0.10 0.00 (2 HOLES) = = O 0.20 B DIMENSIONS IN WIDTH contact A (mm) B (mm) C (mm) positions 042 37.210 29.210 19.050 082 56.260 48.260 38.100 110 69.595 61.595 51.435 126 77.215 69.215 59.055 158 92.455 84.455 74.295 174 100.075 92.075 81.915 D (mm) 22.50 41.60 54.90 62.50 77.90 85.40 Recommended panel cut-out. Dimensions are in mm 158 APRIL 2005 CMD Series Receptacle connector 42 to 174 contacts, surface mount tail termination style 13.70 D-SHAPED GUIDE SOCKETS xxxx 8.00 max CMD***EF****H 16.97 2.10 A max S M2.5 2 PLACES B 4.00 10.90 max S=0.75 mm S=1.10 mm S=1.60 mm S=1.85 mm 5.715 CONTACT POSITION 1 = = 1.905 CONTACT POSITION 2 LAST CONTACT POSITION = = 1.905 C Receptacle connector: 42,82,110,126,158,174, socket contact positions, 1.905 mm spacing, board package thickness from 1.00 to 4.20 mm. SIDE OPPOSITE MATING FACE DIMENSIONS IN WIDTH LAST TERMINAL POSITION N+1 contact positions A (mm) B (mm) C (mm) 042 082 110 126 158 174 37.210 56.260 69.595 77.215 92.455 100.075 29.210 48.260 61.595 69.215 84.455 92.075 19.050 38.100 51.435 59.055 74.295 81.915 1 N 2 Contact pattern numbering. B 0.60 max 0.55 min = 5.08 C EDGE OF BOARD 0.9525 2.70 min PCB MTG HOLE 2 PLACES CONNECTOR DIMENSIONS PCB SIDE B 5.00 min 4.10 max 0.9525 = VIEW SIDE A PCB SIDE A VIEW SIDE B Mounting pattern, daughterboard application. Dimensions are in mm APRIL 2005 159 CMD Series Receptacle connector 42 to 174 contacts, dip solder, right angle, termination style 2.10 8.00 max A max D-SHAPED GUIDE SOCKETS CMD***EF****H ****** 8.00 1.905x3=5.715 1.905 4.00 = B 2.54 = 10.90 max M2.50 THREADED THRU HOLE 1.905 CONtaCT POSITION 2 5.715 CONtaCT POSITION 1 O 0.48 L=2.76 = L=3.55 = L=4.37 = LAST CONtaCT POSITION = 1.905 C Receptacle connector: 42, 82, 110, 126, 158, 174, socket contact positions, 1.905 mm spacing, dip solder (right angle) termination style. COMPONENT SIDE 7.80 max C 5.08 O 0.70 min O 0.05 1.905 O 2.70 +0.10 (2 HOLES) 0.00 = O 0.10 2 1 N 1.905 2.8575 N+1 = 1.905 x3= 5.715 = = B LAST HOLE POSITION Mounting pattern, extender board and in line board-to-board applications, (recommended PCB hole configuration). DIMENSIONS IN WIDTH contact positions A (mm) B (mm) C (mm) D (mm) 042 082 110 126 158 174 37.210 56.260 69.595 77.215 92.455 100.075 29.210 48.260 61.595 69.215 84.455 92.075 19.050 38.100 51.435 59.055 74.295 81.915 22.50 41.60 54.90 62.50 77.90 85.40 Dimensions are in mm 160 APRIL 2005 CMD Series Plug connector: 220, 236 and 316 contacts, dip solder, right angle, termination style A max 4.00 B B LAST CONTACT POSITION 5.715 B = A = 5.08 1.905 10.90 max = = A CONTACT POSITION 1 B 1.905 C 7.62 CONTACT POSITION 2 C O 2.70 THRU 3 PLACES B B 5.08 CMD***PM***** 8.00 11.05 14.32 6.80 ****** 19.40 max 8.00 D-SHAPED GUIDE PINS 6.86 M1.6 THREADED SCREW L=2.76 L=3.55 L=4.37 L 3.80 0.700.10 4.30 +0.10 1.10 -0.20 SEE DETAIL A O 0.48 3.90 DETAIL A M1.6 THREADED NUT 1.905x3=5.715 SECTION B-B SECTION A-A Plug connector: 220, 236, 316 pin contact positions, 1.905 mm spacing, dip solder (right angle) termination style. COMPONENT SIDE C 5.08 7.62 O 0.70 min O 0.05 C 1.905 +0.10 O 2.70 0.00 (3 HOLES) LAST HOLE POSITION = O 0.10 B N 2 1 B 128.650 136.270 174.370 60.325 64.135 83.185 51.435 55.245 74.295 9.70 max 1.905 N+1 DIMENSIONS IN WIDTH contact B (mm) C (mm) positions A (mm) 220 236 316 7.15 1.905 x3= 5.715 = Mounting pattern, daughterboard application, (recommended PCB hole configuration). Dimensions are in mm APRIL 2005 161 CMD Series Plug connector: 220, 236 and 316 contacts, dip solder, straight through, termination style A max 4.00 B B = 5.08 1.905 10.90 max = = 5.715 LAST CONTACT POSITION = CONTACT POSITION 1 1.905 CONTACT POSITION 2 C 7.62 C 0.65 min M2.50 THREADED SCREW CMD***PM***** L 7.00 O 0.48 L=2.76 L=3.55 L=4.37 L=5.94 10.61 max 5.08 ****** D-SHAPED GUIDE PINS Plug connector: 220, 236, 316 pin contact positions, 1.905 mm spacing, dip solder (straight) termination style. COMPONENT SIDE 0.70 min DIA C 5.08 7.62 C 1.905 O 2.70 +0.10 0.00 (3 HOLES) LAST HOLE POSITION = O 0.10 N+1 1.905 1.905 x3= 5.715 = O 0.05 N B 2 1 B Mounting pattern, in parallel arrangement board-to-board connection, (recommended PCB hole configuration). DIMENSIONS IN WIDTH contact B (mm) C (mm) positions A (mm) 220 236 316 128.650 136.270 174.370 60.325 64.135 83.185 51.435 55.245 74.295 Dimensions are in mm 162 APRIL 2005 CMD Series Plug connector: 220, 236 and 316 contacts, surface mount tail termination style A max B 4.00 B 10.90 max = 1.905 = = 5.715 LAST CONTACT POSITION = 5.08 CONTACT POSITION 1 1.905 C 7.62 CONTACT POSITION 2 C M 2.5 3 PLACES B ****** 19.40 max 6.86 11.05 S CMD***PM***** S=0.75 mm S=1.10 mm S=1.60 mm S=1.85 mm D-SHAPED GUIDE PINS 5.08 14.32 B Plug connector: 220, 236, 316 pin contact positions, 1.905 mm spacing, board package thickness from 1.00 to 4.20 mm. SIDE OPPOSITE MATING FACE N+1 2 N 1 DIMENSIONS IN WIDTH LAST TERMINAL POSITION contact positions A (mm) B (mm) C (mm) 220 236 316 128.650 136.270 174.370 60.325 64.135 83.185 51.435 55.245 74.295 Contact pattern numbering. B C C 3.81 0.60 max 0.55 min = B 5.08 3.81 VIEW SIDE A = EDGE OF BOARD 2.70 min PCB MTG HOLE 2 PLACES 0.9525 CONNECTOR DIMENSIONS PCB SIDE B 5.00 min 4.10 max 0.9525 PCB SIDE A VIEW SIDE B Mounting pattern,daughterboard application. Dimensions are in mm APRIL 2005 163 CMD Series Receptacle connector 220, 236 and 316 contacts A D-SHAPED GUIDE SOCKETS CMD***EF*****H L=2.76 L=3.55 L=4.37 L=5.94 2.10 8.00 max A max 15.875 0.60 min 7.00 L ****** M2.50 THREADED SCREW O 0.48 0.46 A B VIEW A-A DIP SOLDER, STRAIGHT TERMINAL EQUIPPED. 4.00 BUT WIRE WRAP POST TERMINAL EQUIPPED. 5.715 CONTACT POSITION 1 CONTACT POSITION 2 = = 1.905 10.90 max B VIEW A-A O 2.60 THRU LAST CONTACT POSITION = = O 4.50; 3.00 DEEP 1.905 5.08 C 7.62 C Receptacle connector: 220, 236, 316 socket contact positions, 1.905 mm spacing, dip solder (straight) and wire wrap post termination style. COMPONENT SIDE O 0.70 min C 5.08 C O 0.05 1.905 = 1.905 x3= 5.715 7.62 O 2.70 +0.10 0.00 (3 HOLES) = O 0.10 N 2 1 1.905 = = N+1 LAST HOLE POSITION B B Mounting pattern, motherboard application, (recommended PWB hole configuration). 4.200.10 9.50 min = = O 2.70 +0.10 0.00 (3 HOLES) = B 0.20 D min = D min B DIMENSIONS IN WIDTH contact A (mm) B (mm) C (mm) positions 220 128.650 60.325 51.435 236 136.270 64.135 55.245 316 174.370 83.185 74.295 D (mm) 54.90 58.70 77.70 Recommended panel cut-out. Dimensions are in mm 164 APRIL 2005 CMD Series Receptacle connector 220, 236 and 316 contacts, surface mount tail termination style 8.00 max 13.70 CMD***PM***** ****** 16.97 2.10 A max D-SHAPED GUIDE SOCKETS S=0.75 mm S=1.10 mm S=1.60 mm S=1.85 mm M2.5 3 PLACES S B B 10.90 max 4.00 = = 1.905 CONTACT POSITION 2 5.715 CONTACT POSITION 1 LAST CONTACT POSITION = = 1.905 5.08 C 7.62 C Receptacle connector: 220, 236, 316 socket contact positions, 1.905 mm spacing, board package thickness from 1.00 to 4.20 mm. SIDE OPPOSITE MATING FACE LAST TERMINAL POSITION DIMENSIONS IN WIDTH 1 2 N+1 contact positions 220 236 A (mm) B (mm) C (mm) 128.650 136.270 60.325 64.135 51.435 55.245 316 174.370 83.185 74.295 N Contact pattern numbering. C 3.81 C 0.60 max 0.55 min = 5.08 3.81 4.10 max EDGE OF BOARD O 2.70 min PCB MTG HOLE 3 PLACES 0.9525 CONNECTOR DIMENSIONS PCB SIDE B 5.00 min 0.9525 = VIEW SIDE A PCB SIDE A VIEW SIDE B Mounting pattern,daughterboard application. Dimensions are in mm APRIL 2005 165 CMD Series Receptacle connector 220, 236 and 316 contacts, dip solder, straight through, termination style 2.10 D-SHAPED GUIDE SOCKETS 4.00 CMD***EF****H 16.60 8.00 max A max ****** 8.00 1.905x3=5.715 1.905 = B 10.90 max B 2.54 = M2.50 THREADED THRU HOLE = 1.905 CONTACT POSITION 2 L 5.715 CONTACT POSITION 1 O 0.48 = L=2.76 L=3.55 L=4.37 LAST CONTACT POSITION = = 1.905 5.08 C 7.62 C Receptacle connector: 220, 236, 316 socket contact positions, 1.905 mm spacing, dip solder (right angle) termination style. COMPONENT SIDE O 0.70 min 7.80 max C 5.08 7.62 C 1.905 O 2.70 +0.10 0.00 (3 HOLES) = = = O 0.10 1.905 2.8575 N+1 = 1.905 x3= 5.715 O 0.05 N B 2 1 B LAST HOLE POSITION Mounting pattern, extender board and in line board-to-board applications, (recommended PCB hole configuration). DIMENSIONS IN WIDTH contact positions 236 220 316 A (mm) B (mm) C (mm) 128.650 136.270 60.325 64.135 51.435 55.245 174.370 83.185 74.295 Dimensions are in mm 166 APRIL 2005 CMD Series Hardware code TYPE Y TYPE P -OMNIPOLARIZED MALE GUIDE PIN: pos. 37: with Loctite 242 (blue) TYPE K -SCREW LOCK pos. 39: without Loctite CENTRAL POSITION LATERAL POSITION -POLARIZED MALE GUIDE PIN: pos. 00: without Loctite pos. 01/36: with Loctite 242 (blue) -Whithout guide TYPE Y -POLARIZED MALE GUIDE PIN: pos. 01/36: without Loctite TYPE P -OMNIPOLARIZED MALE GUIDE PIN: pos. 37: without Loctite TYPE K CENTRAL POSITION LATERAL POSITION Hardware code for plug connector, right angle contact terminal style - Not available -SCREW LOCK pos. 39: without Loctite TYPE Y -SPANNER WRENCH: ref. order 18167 -POLARIZED MALE GUIDE PIN: pos. 00: without Loctite pos. 01/36: with Loctite 242 (blue) TYPE P -OMNIPOLARIZED MALE GUIDE PIN: pos. 37: with Loctite 242 (blue) CENTRAL POSITION LATERAL POSITION Hardware code for plug connector, straight thru contact terminal style - Screw M2.5x5: with Loctite (blue) Hardware code for plug connector, surface mount tail contact terminal style APRIL 2005 167 CMD Series TYPE Y -POLARIZED FEMALE GUIDE: pos. 01/36: without Loctite Positioner contact TYPE P -OMNIPOLARIZED FEMALE GUIDE: pos. 37: without Loctite CENTRAL POSITION LATERAL POSITION Hardware code - Screw M2.5x12: without Loctite Positioner contact Positioner contact Hardware code for receptacle connector, right angle contact terminal style -POLARIZED FEMALE GUIDE: pos. 01/36: without Loctite TYPE P -OMNIPOLARIZED FEMALE GUIDE: pos. 37: without Loctite TYPE K -SCREW LOCKING: pos. 39: with Loctite 242 (blue) CENTRAL POSITION LATERAL POSITION TYPE Y - Without guide - Without guide TYPE Y -SPANNER WRENCH: ref. order 18199 -POLARIZED FEMALE GUIDE: pos. 01/36: with Loctite 242 (blue) TYPE P -OMNIPOLARIZED FEMALE GUIDE: pos. 37: with Loctite 242 (blue) CENTRAL POSITION LATERAL POSITION Hardware code for receptacle connector, straight thru and wire wrapp contact terminal style - Screw M2.5x6: with Loctite 242 (blue) Hardware code for receptacle connector, surface mount tail contact terminal style 168 APRIL 2005