CSeries
C
92
Switch with IEC Connector Compact Size
UL Recognized
CSA Certified
VDE Approved
C Series
Two function power entry module combining a DPST
switch and an IEC 320 power line connector. Compact
packaging allows a smaller panel cutout with choice of
snap-in or flange mounting. Available with general
purpose filtering (F models - CFS, CFE), medical
application filtering (H models - CHS, CHE) or unfiltered
(CS, CE). Terminals allow for easy connection to any
wiring scheme. Preconnected terminals from line to switch
are available (B Models - CBS, CBE) for reducing OEM
wiring time.
The medical versions (H models) are designed specifically
for health care applications. Their extremely low leakage
current allows compliance with UL544 and UL2601 as well
as CSA22.2 health care specifications for use with both
patient and non-patient care equipment.
The C series also has the adaptability to fit into existing
panel cutouts using snap-on extender options. Using the
CA430 extender, the panel cutout height is increased by
0.13”. (Extender is available pre-assembled using part
numbers with ‘K’ designation)
Specifications
Hipot rating (one minute):
line-to-ground 2250 VDC
line-to-line 1450 VDC
Operating frequency: 50/60 Hz
Rated voltage: 120/250 VAC
Rated current: 10A@120 VAC
10A @ 250 VAC
Operating voltages: 115/230 VAC
Switch: Rated for 10,000
operations at full load.
51 Amp inrush capability.
Terminals: Unfiltered .187” x .032” terminals
Filtered .25” x .032” terminals
Filtered Models Only:
Maximum leakage current, each line-to-ground
F models @ 120 VAC 60 Hz: .25mA
@ 250 VAC 50 Hz: .40mA
H models @ 120 VAC 60 Hz: 2µA
@ 250 VAC 50 Hz: 5µA
Minimum insertion loss in dB:
Line-to-ground in 50 ohm circuit
Current Frequency MHz
Rating 0.05 0.15 0.5 1 5 10 30
H Models
1A 16 21 37 44 26 21 10
3A 9 14 31 32 26 24 14
6A 4 10 22 23 19 18 13
10A 2 6 10 15 11 11 9
F Models
1A 10 26 46 48 46 47 46
3A 8 16 32 36 43 48 50
6A 411 22 27 36 41 50
10A 1 4 14 18 27 33 42
Line-to-line in 50 ohm circuit
Current Frequency MHz
Rating 0.05 0.15 0.5 1 5 10 30
H Models
1A 1 6 13 29 38 42 26
3A 1 5 10 22 36 34 36
6A 1 5 14 20 31 33 37
10A 1 4 11 19 32 37 38
F Models
1A 1 3 13 28 62 67 42
3A 2 6 14 23 65 65 67
6A 2 6 14 27 46 48 58
10A 1 7 14 23 42 44 62
Electrical Schematic
F Models (CFS, CFE)
H Models (CHS, CHE)
Resistor location for reference only.
CFS
CS
Note 1: Jumpers provided on CBS and CBE versions.
Note 2: Location of optional filter.
B Models (CBS, CBE)
Note 1
Note 1
Note 2
Note 2
Power on/off
www.cor.com - Libertyville, IL (847) 680-7400
Libertyville, IL (847) 680-7400 - www.cor.com
Series
C
C
93
Case Styles
Metric shown in italics.
CE, CBE†
CFS, CHS
CS, CBS†
Mounting holes: Dia. (2) with .23 Dia. x 90° Counter sunk
.13
3.3
Case Dimensions
Metric shown in italics.
Part A B C D EF
No. (max) (max) (max) ±.006 ±.006 ±.006
±.152 ±.152 ±.152
CS, CBS
CE, CBE
CFS, CHS
CFE, CHE
1.23
31.24 .97
24.64 1.62
41.17 1.06
26.92 1.540*
39.12* 1.417
36.0
.97
24.64 1.62
41.17 1.06
26.92 1.540*
39.12*
1.74
44.2
Panel Cutout for thickness of .031-.098 (.8-2.5).
Not recommended for plastic panels.
For snap-in applications, the D sides of the cutout must have a
.02(.508) radius on the installation side.
Snap-in models allow front mounting only.
1.23
31.24
1.74
44.2
1.12
28.5
1.12
28.5 1.417
36.0
1.62
41.17
1.62
41.17
* with K extender (CA430) add to height .13
3.3
1.540*
39.12*
1.540*
39.12*
2.53
64.26
2.53
64.26
CFE, CHE
†CBS, CBE Pre-wired Terminals
Available Part Numbers
10CS1 10CE1 1CHS1 1CHE1
10CKS1 10CKE1 1CKHS1 1CKHE1
1CFS1 1CFE1 3CHS1 3CHE1
1CKFS1 1CKFE1 3CKHS1 3CKHE1
3CFS1 3CFE1 6CHS1 6CHE1
3CKFS1 3CKFE1 6CKHS1 6CKHE1
6CFS1 6CFE1 10CHS1 10CHE1
6CKFS1 6CKFE1 10CKHS1 10CKHE1
10CFS1 10CFE1
10CKFS1 10CKFE1
10CBS1 10CBE1
10CKBS1 10CKBE1
Panel Cutout
10CKFS1
Current Rating
(1, 3, 6, 10A)
Series
Extender Option
Blank - Without extender
K- Pre-assembled with
CA430 extender
Terminal Type
(1/4” quick connect)
Filter Type
Blank - Unfiltered
B - Pre-wired switch
F- Standard Filter
H - Medical grade filter
Mounting Type
S - Snap-in
E - Flange mount
Ordering Information
Consult your local Corcom sales representative for pricing.
Mounting holes: Dia. (2) with .23 Dia. x 90° Counter sunk
.13
3.3
