SSGSWG-LVQ-13T - Cornucopia Tool & Plastics, Inc.

Home EC2 Robison Electronics Cornucopia Contact Us

Made in U.S.A.

Background

Passive Delay Lines

Active Delay Lines

Digital Modules

Inductors

Hall-Effect Sensors

PDF Catalogs

Technical Info

Search Products

Frequency

Multiplier

Modules

Pulse Generator

Modules

Noise Filter

Modules

Square Wave

Generator

Modules

Encoder/Decoder

Modules

SQUARE WAVE GENERATOR MODULES

SSGSWG-LVQ-XXX

Space Saver LVQ 3V Gated Square Wave

Generator

- T²L LV Cmos input and outputs

- Output wavetrain can be started in sync with random events

- 8-pin Space Saver package

- Leads - thru-hole, J, Gull Wing or Tucked

- Available in frequencies from 2 MHz to 80 MHz

- Output frequencies controlled to within ±2%

- 12mA output drive capability

DESIGN NOTES

The LVQ "Space Saver Series" Gated Square Wave Generator modules developed by

Engineered Components Company have been designed to provide a square wave output

at frequencies from 2 MHz to 80 MHz. These generators are both keyable and

synchronizable, producing a continuous output train as long as a zero (low) is

maintained at the enable input. As long as the enable input is a "1" (high), OUT1 will be

a constant "1" (high) and OUT2 will be a constant "0" (low). Whenever the enable input

goes low, OUT2 goes high immediately. OUT1 and OUT2 go low together after a one-half

cycle delay and, thereafter run in phase. When enable input returns to high, OUT2 is

forced low immediately and OUT1 is forced high one-half cycle later. (Note: The output

buffers will add one propagation delay to all times).

These Gated Square Wave Generator modules are of hybrid construction utilizing the

proven technologies of active integrated circuitry and of passive networks utilizing

capacitive, inductive and resistive elements. The MTBF on these modules, when

calculated per MIL-HDBK-217 for a 50° C ground fixed environment, is in excess of 4

million hours.

The SSGSWG-LVQ is offered in 28 different frequencies from 2 MHz to 80 MHz. Output

frequencies are controlled to within ±2% and have a temperature coefficient of less than

±600 ppm/°C over the operating temperature range of -40 to +85°C.

These LVQ "Space Saver Series" modules are packaged in an 8-pin housing, molded of

flame-proof Diallyl Phthalate per ASTM D 5948, Type SDG-F, and are fully encapsulated

in epoxy resin. Thru-hole, J, Gull Wing or Tucked Lead configurations are available on

these modules (see Part Number Table note to specify). Leads meet the solderability

requirements of MIL-STD-202, Method 208. Corner standoffs on the housing of the thru-

hole lead version and lead design of the surface mount versions provide positive standoff

from the printed circuit board to permit solder-fillet formation and flush cleaning of solder-

flux residues for improved reliability.

Marking consists of manufacturer's name, logo (EC²), part number, terminal identification

and date code of manufacture. All marking is applied by silk screen process using white

epoxy paint in accordance with MIL-STD-130, to meet the permanency of identification

required by MIL-STD-202, Method 215.

TEST CONDITIONS

1. All measurements are made at 25°C.

2. Vcc supply voltage is maintained at 3.3V DC.

3. All units are tested using a LVQ gate driving the input and one LVQ gate load at the

output.

OPERATING SPECIFICATIONS

*Output frequency will increase or decrease less than 2% for a respective increase or

decrease of 10% in supply voltage.

PART NUMBER TABLE

Suffix Part Number with G (for Gull Wing Lead), J (for J Lead), F (for Thru-hole Lead) or T

(for Tucked Lead).

Examples: SSGSWG-LVQ-10G (Gull Wing), SSGSWG-LVQ-25J (J Lead), SSGSWG-

LVQ-70F (Thru-hole Lead) or SSGSWG-LVQ-12T (Tucked Lead).

Special modules can be readily manufactured to improve accuracies and/or provide

customer specified non-standard frequencies for specific applications.

*Vcc supply voltage:............. 2.7 to 3.6V DC

Vcc supply current:

SSGSWG-LVQ-2................ 4mA typical

SSGSWG-LVQ-80............... 20mA typical

(Current increases with operating frequency)

Logic 1 Input:

Voltage .................... 2V min.; Vcc max.

Current ................... Vcc max.; ±1µA max.

Logic 0 Input:

Voltage .................... 0.8V max.

Current .................... ±1µA max.

Logic 1 Voltage out:............. 2.2V min.; Vcc 3.0;

IOH -12mA

Logic 0 Voltage out:............. 0.4V max.

IOL +12mA

Operating temperature range: .... -40 to +85°C.

Storage temperature:............. -55 to +125°C.

Part Number

SSGSWG-LVQ-2

SSGSWG-LVQ-2.5

SSGSWG-LVQ-3

SSGSWG-LVQ-3.5

SSGSWG-LVQ-4

SSGSWG-LVQ-4.5

SSGSWG-LVQ-5

SSGSWG-LVQ-5.5

SSGSWG-LVQ-6

SSGSWG-LVQ-7

SSGSWG-LVQ-8

SSGSWG-LVQ-9

SSGSWG-LVQ-10

SSGSWG-LVQ-11

SSGSWG-LVQ-12

SSGSWG-LVQ-13

SSGSWG-LVQ-14

SSGSWG-LVQ-15

SSGSWG-LVQ-20

SSGSWG-LVQ-25

SSGSWG-LVQ-30

SSGSWG-LVQ-35

SSGSWG-LVQ-40

SSGSWG-LVQ-45

SSGSWG-LVQ-50

SSGSWG-LVQ-60

SSGSWG-LVQ-70

SSGSWG-LVQ-80

Output Frequency

2.0 MHz

2.5 MHz

3.0 MHz

3.5 MHz

4.0 MHz

4.5 MHz

5.0 MHz

5.5 MHz

6.0 MHz

7.0 MHz

8.0 MHz

9.0 MHz

10.0 MHz

11.0 MHz

12.0 MHz

13.0 MHz

14.0 MHz

15.0 MHz

20.0 MHz

25.0 MHz

30.0 MHz

35.0 MHz

40.0 MHz

45.0 MHz

50.0 MHz

60.0 MHz

70.0 MHz

80.0 MHz

:: Site Created by KLM Designs ::

[Top]